While doing the XDA-Developer upgrade, XDA-developers-SER-v12.exe, right after "getting information from device", the com port connection was lost, now (I didn't unplug anything), i have a "upgrading...........It will take about 5 minutes" screen on my device.
I have tried a hard reset, soft reset, etc etc.
now the PC won't recognise the device so that ui can restart the upgrade.
Any suggestions???
XDATools
Use the SD method.
sorry, i don't know what the SD method is......can someone link me, please?
http://wiki.xda-developers.com/wiki/XDAtools
http://wiki.xda-developers.com/wiki/WallabyBootloader
Related
I was running the XDA-developers-SER-v12.exe from my laptop with my sx56 connected through the cradle beacuase it said to hook up to active sync. During the upgrade it said it couldn't verify a com or usb port or something like that and the upgrade just stopped. Now my device is frozen at Upgrading... and I'm not sure what to do. Was I supposed to connect with a serial cable to do the install. Please can someone give me baby steps - step by step, I'm not very good at this kind of thing. Thanks!
Hi ...
1. what was your original ROM version before the upgrade ?
2. Can your device be recognized by Active Sync ? ... if yes, go to \windows\startup and delete the upgrade batch file and soft reset.
3. Did you try a hard reset ?
No, my device is not recognized by Active Sync. I have tried a hard reset, but it has no effect, the screen is still frozen...
mbilson said:
I was running the XDA-developers-SER-v12.exe from my laptop with my sx56 connected through the cradle because it said to hook up to active sync. During the upgrade it said it couldn't verify a com or usb port or something like that and the upgrade just stopped. Now my device is frozen at Upgrading... and I'm not sure what to do. Was I supposed to connect with a serial cable to do the install. Please can someone give me baby steps - step by step, I'm not very good at this kind of thing. Thanks!
Click to expand...
Click to collapse
There still maybe some hope! Rerun the XDA-developers-SER-v12.exe and the upgrade should start where it left off, so give it a try.
If that fails your next option would be the SD card boot loader method. So if you don't have a PC SD reader plan on getting one.
HTH
Thanks for the advice. I tried re-running it many times, still no luck. It is still under warranty so I sent it back to Siemens, they authorized flashing the ROM. When it comes back, I now have the unlocking software from gsmlocker.com and I will start again.
I have a Siemens SX56 a usb cable and SD card and while using the Special Edition Rom heres what happened:
When updating the ROM (it said updating on the PC and on the phone), I received an error message on the PC. It told me to unlplug the device, do a reset and try again. I tried that, but the seimens sx56 still displayed the screen that says upating ROM. Reseting does not seem to work.
I am using the usb cradle that came with the phone. I used active sync to
connect to my PC. Yes, All the phone says now is "upgrading, will take about 5 minutes. I tried flashing the ROM last night. The phone has been in this state for at least 15+ hours. Doing a hard reset does nothing. All the pc said was "an error occured while trying to upgrade, please remove the device from the power source, reset the device and try again."
Now the phone won't connect to the pc via active sync.
Thanks.
search thru the forum, you may find something!
If not , let other people fix it for you!
Did you manage to fixed your phone? Got the same problem.
You should download xdatools, program your sd card with the rom, then put the sd card in the pda and push reset while holding down the power button, push the action button when prompted, this will program your phone, as long as you dont have one of the akward bootloaders you should end up with a working phone after a hard reset.
I have a Siemens SX-56 a usb cable and SD card and while using the Special Edition ROM heres what happened:
When updating the ROM (it said updating on the PC and on the phone), I received an error message on the PC. It told me to unlplug the device, do a reset and try again. I tried that, but the seimens SX-56 still displayed the screen that says upating ROM. Reseting does not seem to work.
I am using the usb cradle that came with the phone. I used active sync to
connect to my PC. Yes, All the phone says now is "upgrading, will take about 5 minutes. I tried flashing the ROM last night. The phone has been in this state for at least 15+ hours. Doing a hard reset does nothing. All the pc said was "an error occured while trying to upgrade, please remove the device from the power source, reset the device and try again."
Now the phone won't connect to the pc via active sync.
Thanks.
Don't be worry.
the problem can be fixed,contact me!
Tommygunz, you can use the sd card method of flashing.
I tried to reflash my Magician. No success .
I think smth was fatal on reflashing of extended ROM part. Or device id data was erased.
1. I can switch on the phone only after battery removing (hard reset performing). Everything is working.
2. BUT - I can't do soft reset. I get dark sreen with "serial..." sign If I want to switch phone back again I have to do #1
3. There is no Ext ROM (even if I try to run loadvdisk.exe program) at all!
4. When I try to reflash from working phone (I want to get back to my previous ROM), at first everything is OK (fist checking of device is passed). Program detects current ROM versions and suggest to upgrade to another). But when I press "upgrade" button it begin to check device information again and freeze for several minutes. Then it report connection error 101 or get device data error.
5. If I try to reflash from dark screen with "serial" sign - I get error 201: get device data error. Even not first checking passed
6. I tried also SD card to reflash. I use English T-mobile ROM and ntrw.exe. SD card looked like unformatted after the procedure. I press camera and power button and reset - but nothing happenned .
7. BUT! I downloaded modified upgrade file Himaupgrade.exe from here -http://forum.xda-developers.com/viewtopic.php?t=9047&highlight=himaupgradeut+modified And when I run it in "dark screen" stage it is triing to do something. No device data error, program even begin to erase old ROM. But then doesn't work because it is different device and ROM from Himalaya is not suitable for Magician. But as I understood modified file skip device ID checking.
I think if somebody can modify Maupgrade.exe file (for Magician ROM upgrading) - it will helps.
Or any other suggestions? I tried bootloaderfix program, but doesn't work.
It is strange - phone is working, but I can't do soft reset and can't reflash
Guys,
I ve just downloaded this http://rapidshare.com/files/21256078..._DUT_11500.rar romversion in the understanding that it was for the HTC 9000 PDA. There was a file called MaUpgradeUt_noID.exe which I let 'upgrade' my 9000. However, I think something very VERY big went wrong! A reset by pushing the 2 buttons and reset button on the back gives me the option 0 to reset but all I can see after that is a black screen which says USB at the top and at the bottom v1.00
What happened and is this the end of my PDA? Sync won t work anymore now since my PDA can t be detected by windows because I can t get in the PDA!!!
Is there something I can do??!!!
PLEASE HELP ME OUT!!!!
Edit/Delete Message
sounds like you're just in bootloader mode
I think you are in what's called bootloader mode. Read the wiki to check - the screen you are describing sounds normal to me you plug you device into the comp via usb (with sync over usb disabled in active sync) then install a new rom.
You really shouldn't have tried to flash your rom without reading some instructions first but I think that your device should be fine.
If you have already upgraded your rom just do a hard reset and select the option to reset.
Will this thread help?
http://forum.xda-developers.com/showthread.php?t=310056
I'm sorry, this is the thread I ment to link:
http://forum.xda-developers.com/showthread.php?t=310054
strangely enough I found out that I DID use a good version picked from this http://forum.xda-developers.com/showthread.php?t=298020 post. In this thread mwang gives a link to here http://buzzdev.net/index.php?option=com_phorum&Itemid=125&phorum_query=read,40,30486,30486#msg-30486 where I picked the dutch version. I than double clicked the MaUpgradeUt_noID.exe file and the software for upgrading started. When he was at 100% he said the the ROM update was completed and that I had to do a reset. So, I than pushed the three buttons (2x the - button and the reset button at the back of the 9000) but all I than see is the bootloader menu with USB and V1.00...........
Sorry for putting it in three sub forum, my fault, but the device is from my work so I don t want it to be screwed up!!!
sanderh said:
Sorry for putting it in three sub forum, my fault, but the device is from my work so I don t want it to be screwed up!!!
Click to expand...
Click to collapse
Rather late now, but if it's owned by your company for work, should you really be di**ing with it?
Solution to probl: Stuck in Bootloader
The one way of fixing your problems....you're officialy stuck in bootloader,
Here's the way to fix it:
1. Stop Activesync USB connection on your machine under connection settings.
2. Uni : Reboot Bootloader then Connect USB ( If your phone isn't in bootloader already..)
3. PC : Run mtty1.42.exe ( Download from XDA's ftp site or search the forums, I'm sure you'll find it.)
4. Choose USB in "Port" (Reconnect if can't find/reconglize USB and try remove sim and sd card)
5.1 Press Enter
5.2 USB> (This will show up)
6. Type: Set 14 0
7. Press Enter
8. Run your rom update again and it should flash this time.
did it start??
did it start?? ?
Hi. first post.
Have an o2 exec. Different brand same deice and none of the other methods worked but finally got it working. Using mtty1.42.exe it would not see usb connection and therefore could not go down that route.
I booted into the bootloader mode that says serial at the top and v1.00 at the bottom.
Connected to the pc and cant remember if i stopped wcescomm.exe or not but you can try both ways.
Then started Midget_1990_v1_0_PU10_WWE.exe rom and followed the instructions and voila.
Hope this helps someone.
"Using mtty1.42.exe it would not see usb connection"
You need to disable the usb connection of active sync under connection settings and then only mtty will pick up a usb connection..