Related
:x i have been trying to get the bluetooth sync to work to no avail. i am using a 3com bluetooth usb adapter on my pc and card on my notebook. i am having problems with both when i try to synchronise. i can see my i-mate has been discovered and bonded; i can send files too. but i cannot synchronise. either there is a bug in the PDA software, or its really hard (needs a rocket scientist) to use!!! either way its dissappointing. can anyone help?
by the way my nokia and ericsson phones sync fine with my current setup.
I have the same problem using a toshiba portege 4010 with bluetooth built in, it works with my Nokia but not with the XDA i am using aytivesync 3.7.1
I would also like some help or ideas please
Thanks
John
Got bluetooth to work once
I got bluetooth to work only once using a Billionton USB Bluetooth adapter. The software is neat, but requires so much messing around with to get the PDA to actually synchronise in bluetooth mode. Unfortunately, I could not get it to work again. Should have documented what I did the first time.
After trying lots of times, it works. I sycronised a XDA2 in bluetooth mode.
There are a few important things
1. You first have to sychronise the XDA2 in USB Cradle to build a standard-partnership between desktop pc and XDA2.
2.remove the XDA2 from the Cradle.
3.look which com-port your bluetooth serial port is using
4.take these settings over to the active sync settings (must be exactly the same com port)
5. pair the two devices
6.start active sync on the XDA2 and sychronise via bluetooth
It works.....
i made a better description with screenshots (in german) but i don't know how to post it.
I use a toshiba laptop with bluetooth built in, but when i scan the available bluetooth things in the XDA 2 it only finds "voice gateway" and "SSA" or something like that, there is no serial port listed, when i scan a phone (nokia) it finds "dun" "serial port" "fax" etc etc.
So i cant connect my XDA2 as the only profiles it seems to have are Voice gateway and some SSA thing, so as there is no serial port listed i cant use activesync, i have bonded with both the voice and SSA thing to com ports from 5 to 9 and get a connection, but as its not a serial port it will not work with activesync.
Sorry for my terrible description of the problem, but if yours works i am sur e it will make sence to you
Thanks
John
Your right ! The XDA2 provides no serial port profile to my Bluetooth stick too. And thats why the Bluetooth GPS Receiver doesn't work.
I know this sounds strange, but with Active Sync Bluetooth definitely works.
Yes I finally got it to work a couple of days ago with a certain type of bluetooth usb adapter and software. All I can say, is that bluetooth is not very user friendly!!!! Activesync should have it show up just as it shows "infrared" in the connection settings. This will make it very easy to select it. In this day and age, you cannot expect a technology to be successful from mass usage if it is not totally idiot proof. BLUETOOTH is not.... WIFI will rule!!!!
Hi so have you bonded to the "ssa" profile, and then what ever com port you used you then changed activesync to use this port and it then works, because i tried this and it done not work.
I also have a tomtom bluetooth that a friend is borrowing, but by the looks of it there is no point in getting it back as if there is no serial port on the available using bluetooth that will not work either
Thanks
John
try this link. it may help u set up your bluetooth with active sync - http://www.bluetoothnews.com/features/ActiveSync.htm
@applecom
No. You just have to pair the Devices. Don't connect to any Profile.
Pair them and then start Active Sync from the XDA 2 and connect with bluetooth.
activesync and bluetooth with xda II
start > settings > system > bluetooth settings > Activesync over blutooth (START)
Nutty but there you go.
XDA II Bluetooth ActiveSync
I noted if you add or change the registry will work even better :
\HLKM\SOFT\Microsoft\Bluetooth\Activesync
IsBTASsetup from 0 to 1
Hi
I have changed the registry like you said, But how dose it work better, the only problems i have are when i ask activesync on the XDA to connect over BT it oftern trys and says port in use, i just retry a few times and it works. After doing the reg edit it did connect first time, but is this what you ment by "its works better"
Thanks
John
As this my first ever post, I don't want to come over as smug, but I took delivery of my XDA 2 today and it synced using bluetooth after about 25 minutes of 'messing'!
All I did was delete all the bonding between the PC and the XDA and told it to sync via bluetooth, initiating from the XDA, I thought that it had failed...but then the XDA sprang to life and 'Bob was my uncle'!!
Very impressed with my XDA 2, having used an XDA for about 8 months.
Andy.
Bluetooth Sync
What I meant was it has become easier to get XDA II sync via bluetooth. Please note that you have to unpair your PC first then change the registry and pair again. If your PC's Bluetooth dongle support Headset profile ( I used anycom USB220 which has this profile) you will see your XDA II asking you if you want Headset profile added and Activesync screen for bluetooth appeared as well. Changing the registry will always make the sync work is what i noted. Seems like XDA II Bluetooth supports many profile just that dont know how to make it works.
Bluetooth Activesync problems
I'm on the verge of giving up on this! Think I should stick to USB sync...here goes...
I've tried the tricks mentioned in the forum to try to get my XDA II to sync via bluetooth with my Sony VAIO laptop (it has built-in bluetooth). I can get the two devices to bond (I enter the PIN number on both the laptop and XDA and it succeeds) but then I try to run the Bluetooth Activesync setup (in Settings-->Bluetooth Settings on the XDA) I get an error message every time that says "Please bond with other Bluetooth device which supports serial port or Activesync profile as your Activesync partner!"
I thought I already HAD bonded the devices? Any ideas?
Cheers
Carlton
Finally sorted it out. Delete the partnership that you already have. Start from start>settings>system>Bluetooth Settings. When you clik start, then pair your device again. After the pairing, you will get the message that Bluetooth Active Sync is now ready.
Still no joy
Thanks for your help Merc.
I tried doing exactly what you suggested but still doesn't work. This is what happens:
I deleted the existing bond on both XDA II and PC.
I went to start>settings>system>Bluetooth Settings and clicked on Start. This gave me the message "Please bond with other Bluetooth device which supports serial port or Activesync profile as your Activesync partner!" like before, then automatically opened the Bluetooth connections control panel in the "Mode" pane. I chose 'Discoverable' and clicked OK. I then went to my PC and used the Wireless Link control panel and clicked 'Add' (to run Bluetooth connection wizard) which searched for devices. It found my XDA II and I entered the passkey on both XDAII and PC (same passkey on each).
The Bluetooth connection wizard then told me that the XDAII was offering DUN (dial up networking) services. I selected this and then clicked next. Was I supposed to select this (actually, it made no difference when I tried again without selecting!).
The wizard completed and both the PC and XDAII notified me that the bond was successful. I then waited and waited for something else to 'happen' (like a message to say that Bluetooth Active Sync is now ready.) but nothing happened. I gave it a couple of minutes.
I went to Activesync on the XDA and tried the 'connct with Bluetooth' just in case it had worked, but nothing happened. I went to Activesync on the PC and tried using a different COM port for infrared/serial links (as I assume this is what bluetooth uses) but no joy. I only had COM3 and COM4 showing in the connection settings in activesync, which surprised me as I thought there would be more.
That's it. I tried 3 times but still no luck. Any other ideas are greatly appreciated!
Cheers
Carlton
The
Your procedure is just like mine. But I used "On" and discovered the PC from the PDA. Do not use "Discoverable". Let me hear if you have any luck
The only way I have got it to work is assigning the bluetooth serial port to COM 6. Then set Activesync on the desktop to COM 6.
Any other COM port just won't work. Anybody else got it working on a different bluetooth COM port?
xdaguru
Now I have been looking for 2 days on this forum, and I cant find it anywhere!!
Okay, I would like to be in my bed with my PDA, and surf the internet.
I dont have a Bluetooth dongle my self, by the guy next to me has. And I have permision to use his internet connection. (Less than 10 meters away, it about 3-4 meters).
So one problem is that I cant use the BT Active Sync, to surf the internet (I dont know if this is how it is done), like you can surf while the XdaII is in the cradel.
So I have been surfing around, and I think I need the WidComm BT stack to be able to surf the internet over BT. But how is this done. I have downloadet files, and read alot on this forum, but I cant seem to find any install guide those cab files and other thing to the PDA.
And then I have read about alot of users that has had problems with the WidComm stack, and say that the M$ BT stack can do the same in the latest update, but I cant find the settings, it all looks the same.
So if any one can help a XdaII (or PDA) newbee, with an install guide and some of your sugestions for the networking, then I would be realy happy.
BTW, if you also know how to set up an audio gateway on the PDA (for my head set) then that wold be great as well. And maby to get the button on the headset to do M$ voice command (if you have it install), then that would be fantastic.
Try downloading bluetooth tools and see if that works for you.
http://bluetooth.i-networx.de/index_e.html
I did that, but it did not change to much, it only gave me a "call last number" function in the head set, but not any thing with the network
BT and COM
i am having a hard time with it as well, I have win XP pro, and a sitecom USB BT dongle, the drivers for the dongle dont seem to work, it is has if the XP drivers have taken over, all the guides seem to use settings that are not available to the Windows XP BT drivers,
at one point i thought i got it, instead of connecting my XDA to the PC i did it the other way about. This time windows detected and setup some COM ports, although at the moment its at com 13 and 14
(this can be changed by doing to Device manager, selecting the port, properties, advanced, and changing it to whatever you want, it will say the port is in use, but none of the other ports 1-12 are infact in use (although it says they are) not sure if this will generate further problems?
So i think thats the PC side sorted?
now the PDA side, just before i updated PPC2003 i tried this and it didnt work, i then installed those BT tools and it came up with the cool servies page right at the end of setting up a link.
But didn't work, with hindsight i believe it would work if i had connect as i explained above, adding the XDA to the PC.
I then updated PPC2003 useing o2's updater.
setting up a link using the BT settings right after the update did have some extra settings to do with com ports but it still doesnt work and the connect via BT on activesync isnt there.
Then i tried those BT tools everyone is going on about
i get the BT icons on the desktop but thats it, nothing else happens. The cool services screen fails to pop up after setting the link and the connect via BT in sync is also missing.
this might be of no use but at one point useing standard drivers from XP and PPC2003 SP1 i did get a message saying it couldnt connect because it might not be a smart phone or PPC or somthing like that. im totally stuffed with this.
oh it does connect in that i can transfer files TO the XDA but not the other way about.
Hello folks!
This is how I've done it...
1- I installed Widcomm version 1.3.2.7 (on the PC) (BTW I use a Cheap-o-Epox USB dongle)
2- I Downloaded BT Tools (http://bluetooth.i-networx.de/index_e.html)
3- I established an Activesync connection through Bluetooth (this is done on the PocketPC by using the Activesync/Tools/Connect via 'computername')
4- I configured Widcomm to always trust the incoming MDA2 Bluetooth connection.
5- That's it, works every time... (well actually sometimes works on the second try but works nonetheless)
Good luck!
Rayan
I've also had some success with the Widcomm stack, but I have one problem.
In order for the bluetooth connection to work, I need to log into an account on the XP machine. If someone else then comes along and logs into another account, then my bluetooth connection is dropped. Also, if I don't log into an account, then I can't use bluetooth.
Basically, it seems to be the case that instead of running as a service, the bluetooth stack is running in user accounts. Anyone else got experience with this? Is there a way to configure the installation so that it runs as a service?
Hi Guys,
I have a similar question... is there a release due / tools available to fully utulise the bluetooth stack like the ipaqs for example. Ipaqs can locate and connect to devices as a 'hunter' but the XdaII just seems to be the 'hunted' when it comes to establishing a connection. Is there any way to make my otherwise excellent XdaII a bit more agressive when it comes to seeking out bluetooth connections??? I have already installed the Bluetooth tools v1.01 but this doesn't help the actual 'seeking' connectivity part of things
Can any of you bright sparks out there help ???? If enough people wanted this functionality, what would it cost to develop if it is not available maybe ???
just a thought. Cheers all.
AndyG
Technoas said:
Now I have been looking for 2 days on this forum, and I cant find it anywhere!!
..............
So I have been surfing around, and I think I need the WidComm BT stack to be able to surf the internet over BT. But how is this done. I have downloadet files, and read alot on this forum, but I cant seem to find any install guide those cab files and other thing to the PDA.
So if any one can help a XdaII (or PDA) newbee, with an install guide and some of your sugestions for the networking, then I would be realy happy.
Click to expand...
Click to collapse
I found the answer to how to install the .cab file, just copy it to your device and select it in file manager, it then install's itself.
If I manage to connect my GTek 2020 to my BT AP with this I'll let you know!
Hi.
I have Orange SPV M1000.
I have tried to get it bonded to a Logitech diNovo keyboard on my PC.
By trying to add it to Settings | Connections | Connections | Advanced | Select Networks | New (internet) | New | (a name : abc, a modem: bluetooth) Next | New... | My_PCs_Name | Next | Name: my_pcs_name |Finish
Then the pops 2 requesters up
1.) This bluetooth device supports Serial port profile, would you like to create a Bluetooth serial port for it? (My answer: both yes or no)
2.) This bluetooth device supports headset profile, would you like to set it as your bluetooth headset? (My answer : No)
I have tried this when Connections | Bluetooth | was set to both "Discoverable" and "On"
but apparantly to no avail.
What I would have liked to work was:
1.) bluetooth activesync
2.) browsing via bluetooth from my PC's connections
3.) filetransfer via bluetooth (might go under activesync)
But I seem unable to get it to work.
Does anyonw have some ideas for this.
Thank you in advance.
Best regards: Jacob Eskildsen / eskildsen
there is no one around here seems to know this
i have been trying to do the exact thing for a few days now, had no joy at all.
there is not even one person using this kind of connection? or just do bother to tell.
I can make PC side working. Internet Connection Sharing bit, and I can even PING my PC from XDAII.
can somebody here help. if you really did this yourself
activesync and internet through bt
I just got activesync and internet working through bt . But I'm not sure how I did it . I have no extra bt software on my phone. I have a usb BT dongle (MSI) and I paired both of the devices. In all the settings I made sure internet sharing was allowed, on the BT network. In activesync in options - rules Pass through is ticked with connection to internet.
On the XDA started activesync through bt and my computer accepted it, and started to sync, the internet then started to work. i think active sync needs to be on for internet to work.
I don't really know the precise instructions, wish I did because i've just lost the connection again, and it will most probably take me another hour to work it out. think this time I better write it down!!!
If you could sync via Bluetooth, then browsing and file transfer via Bluetooth are possible. I've been able to do all of them. Just make sure you choose the ActiveSync profile when you pair your Pocket PC with the Bluetooth device on your desktop PC. If the ActiveSync profile is not available, then choose the Serial Port profile. But afterwards, you would have to go to ActiveSync Connection Settings and manually select the serial port you created.
thanks for advice
I've been having problems, like many people. And I've did what they did. Downloaded bt tools and its working excellent : ). I'm writing this on my xda2, downstairs from my computer. I'm well chuffed. Thanks for your quick reply, it seems your using bt tools too.
Am I ever going to get the hang of this!! BT Activesync ???
I'm able to get Activesync and thus internet through BT, but if I stop bluetooth on my XDA2, and then turn it back on and try to sync, I get an error message, stating Port not available.
What going on? how do I make this port avaliable. I thought I could turn BT on and off without problems, is this not the case. Is my computer configured wrong?
Help!!
Replying to myself!!
OK my problem has been solved, I just turn the BT off and on on my computer.
But what I really want, is to be able to not have to change anysetting on my computer. I would like to be able to enter my house and connect to BT, and then turn it off if I want, and then back on, and then off, on ,off, on..... You get the gist, without have to go upstair to my computer each time.
:twisted:
Any ideas :?
Hi,
Take a look at the guides for bluetooth ActiveSync'ing....
HERE
Thanks
Thank you for that Darius, i'd seen that guide before but forgot where it was. It has helped me to get activesync going anyway. I have actually hard rebooted my XDA2 because my Jabra BT200 stopped working, actually the phone software also buggered up. would ring people but they coud not hear me. Think it may have been BT Tools :roll: Which is a shame, I liked the desktop icons it gave.
At this moment in time I am in the process of restoring my data to my phone over BT, Just hope the BT200, will still work, because before it worked excellent a 100% of the time.
Ive read quite a few threads talking about changing the BT stack, for a more reliable one, but I'm worried about mucking the XDA2 up more.
My next worry is that I've ordered a BT GPS reciever, and I'm gonna try to get Tom Tom working with it, I'm sure I'm gonna have to read quite a few more posts to sort that out. I thought I was good on computers, I think I will have to rethink that altogether.
So far I have been unable to syncronise using bluetooth. I could do it without much sweat win pda2k (ba), but not with jasjar (universal) so far. Any other owner managed to figure out how to do it? Cheers.
Got it working no problem at all. In fact I managed this before I managed to get it working with USB.
I used the same method that one would use for any WM2003 device.
Set PDA to discoverable on JASJAR
Look for BT devices from PC
Select the JASJAR
Select BT serial port
Find out the COM port of this serial port. Note it down.
Fire up activesync
Change the connection settings to look on the com port you noted down.
On JASJAR got to BT settings
Add a BT device
Select your PC
Select Activesync partner
Go to activesync
Select synch via BT from the menu
i will try again
i prefer the wm2003 wizard to wm2005, i will see maybe i missed something. thanks for clear instructions
still problem with bluetooth
Well I still have been unable to get the bluetooth working for the syncing. I follow the instructions in the booklet and help files, + what I just been told, but there are two issues,
the serial port is for outgoing from the PC, so that could not be used.
In the Com ports tabs two com ports get assigned one for incoming and one for outgoing, with the BA, we use the incoming which we feed into the Activesync, and it works then.
If I do that and create a sync relationship on the pda, there is the option of assigning outgoing port from pda, however when relationship is created only the incoming serial is showing up...
anyways, i have no problem using bluetooth on BA, and could not get it to work on jasjar/htc univ.
Doesnt matter I dont mind using the cable, but dishing the equivalent of US$1400 for a pda whose wizards dont work properly is a bit of an anteclimax.
And talking about ergonomics, the virtual keyboard has the annoying tendency to cover what u are going to write, so u dont see what u are writing...
They also removed the Avantgo utility from the IE, but I got it back by installing the one for winCE and upgrading over...
So for now, I will keep working on my BA (pda2k) as I dont want to waste my time working around bugs, until these get ironed out.
Greetings
Nabil H
I hope all these bugs will be fixed after the official launch
working at last
i managed to get the bluetooth syncing, the secret
1. hard reset,
2. recognise device on pc side
3. create activesync partnership on pda side
4. check incoming com port on pc side
5. feed that to activesync on pc side
6. check activesync partnership from pda side with pc
7. pda will pick up on partnership serial connection as being activesync
8. incoming and outgoing com ports ready to be used on pda side
9. choose outgoing com port on pda same as incoming com port on pc
10. connection established syncing starts...
All this without starting using the usb cable (so different from BA method)...
hope it helps others...
probs... again
Now after setting up and synicng with bluetooth I used the usb link to sync, and it complained about an error. I had to remove the bluetooth setup, and it is still complaining, I give up
I guess the famous russian saying is very wise: "Better is the enemy of the good"
Nabil H out
bluetooth, usb link and wifi
No wonder bluetooth was turned off by default in this jasjar shipment. I believe the following are bugs:
1. U can set up activesync over bluetooth initially after a hard reset.
2. If you then set it up after over a usb link, u lose the bluetooth setting, and can only sync over bluetooth after a hard reset again!
3. If u set up bluetooth, u get difficulties with wifi not connecting (on my system I can only get that back by disabling my wifi connection then enabling it again, dont ask me why this is so, i do not have the foggest clue)
4. When ur wifi is worknig u start having problems with bluetooth connections.
5. Even with a bluetooth sync working, u cannot browse folders on ur jasjar device from another device, as this service does not seem to be implemented.
This does not look very good for users who have multiple/various network connections...
So a patch is already needed for these connectivity issues...
Developers, look into this please...
Greetings
Nabil H out
wifi and bluetooth - solved
I finally managed, after some sweat to get:
. Wifi and bluetooth working together
. Two pda's BA and Universal using wifi simultaneously.
However what cannot be done is:
. Using two pda's with activesync simultaneously, this is a limitation of MS Activesync.
Greetings
Nabil H
PS On club imate website there is now a faq fro JASRAR (HTC Univ).
wifi and bluetooth - solved
Nabil,
can you post what you did to get this working.
thanks.
--------------------------------------------------------------------------------
I finally managed, after some sweat to get:
. Wifi and bluetooth working together
. Two pda's BA and Universal using wifi simultaneously.
However what cannot be done is:
. Using two pda's with activesync simultaneously, this is a limitation of MS Activesync.
Greetings
Nabil H
PS On club imate website there is now a faq fro JASRAR (HTC Univ).
Hi Members,
I have just joined the site and this is my first post to try and find a solution to the most annoying frustrating problem im having. I am trying to connect a o2 XDA Mini to my laptop via bluetooth over a belkin dongle. My system only shows com port 4 then 9 12 etc. I have tried using 4 many times. Both the phone and the pc partner ok, but then when i try to sync from the handset the PDA try's to partnet again and will not connect. I have tried other ports, no good! same result. I then searched google extensivly and tried installing other stacks Widcomm, blue soleil etc as i aslo have cards and dongles for those, still no joy. Is the phone broken? Well my wife has the same make and model. Her one wouldnt connect either!! whats the problem with this phone/PDA. Do you have to be a rocket scientist to use BT or what. I visited other sites and forums and posed the question there. Apart from one reply it appears no one seems to know either way. Any help or guides other than the outdates geekzone(2004) would be most appreciated as i think those guides were not created for WM5 systems lol
Thank you and fingers crossed lol
EFM
I've always had problems syncing over bluetooth.
I dont have a WM2005 device, but my XDA mini exhibits the same problems.
I did get my xda to sync through bluetooth on my windows computer, but that was using bluesoeil. Strange thing was, after i switched stacks to the normal windows one, when i successfully sync'ed through bluesoeil, it WORKED!!
A hard reset has happened since then and im plagued with problems.
If you use a mac and a PC like me, i found it very easy to sync my xda mini through bluetooth with a mac. (provided you have buy the software).
If you search even harder through google, theres a page i came across which shows you, through windows cmd line, delete ports and free some up. Havent tried it tho.
Anyways goodluck, try hard resetting and starting fresh if you wanna sync wirelessly that bad.
Try this
Try this , it may work for you. Also I found that XP SP2 is needed if you wnt to sync via BT
http://forum.xda-developers.com/showthread.php?t=246847
Good luck
Ciao
works perfectly for me using different versions of vidcomm on the belkin and logitech dongles i have on various computers
on the pda i just choose the IMSync or whatever it's called as profile
and start activesync on the pda click on sync over bluetooth and it does
Heres something i found...
http://help.lockergnome.com/general/Activesync-Port-Availability-Bluetooth-ftopict26563.html
http://support.microsoft.com/default.aspx?scid=kb;en-us;315539
thats how to delete ghost ports from your system.
I got everything NEARLY set up, i cant set a outgoing port!.
I even hard reseted, still no luck, i think i just need to set a outgoing port to get this to work.
whitemoo.
ok...after restoring my backup from the hard reset, i rebooted the phone.
Then i got side tracked and went on the XDA-developers wiki.
Seeing that 'set up your own bluetooth personal network' article, i decided to set it up.
Figuring out that the original bluetooth stack is worthless, i switched to bluesoeil and rebooted.
Bluesoeil did not work for some reason, and couldnt find my bluetooth hardware, so rebooted the phone with the normal stack.
I went into the normal stack that came with my phone, and mysteriously, i could set outgoing ports!
I set the port my outgoing port to comm0 and tried to sync.
AND IT WORKED!!...its finally syncing!
Oh btw, i found this file in my ext rom: called 'default_BT_com_port0.cab' i installed it and it allowed me to set comm0 in the normal staCK. Previously before i installed that cab, i couldnt see ANY avalible com ports to set.
YAY!...whitemoo.
Hi
Thanks for the advise there it was appreciated. I have tried the different bluetooth devices two doggles and a card all with widcomm and microsoft drivers all have not worked blue soleil wouldnt find a serial port on my phone only dUN and Push obex. I have spent ages on this now i figured it just a worhless wm5 smartphone with a keboard.. oh MS if your listening re XDA Mini factor it in to the guidebook how to sync to an everyday computer to bluetooth. You provide the function but it dont work.. crapper ive had it with this overated smartphone with a slide out keyboard. worse thing is how much i paid for it. what a rip off!! I could get an old C500 WM2003 to BT sync on all three of these BT dongle/card.
Oh well thx.. Guys glad you got a result with yours bravo' lol
Many thanks for the input.
EFM
Hi again,
I have tried to contact o2 re this matter they tell me it cant be done via activesync and bluetooth. Has any one else managed to sync an XDA min via activesync to there computer. I am running xp pro SP2, Activesync Ver. 4.1 of the cover disc with the phone. I downloaded 4.2 and 4.5Beta to make sure none work. Google searches reveal nothin g on the subject. The model i appear to have is the WIZA200 version with WM5 rom version 5.1.195 (build 14847.2.0.0).
Any clues folks
thanks.
EFM
Can anyone help me please with this problem?
Thanks.