i am from poland, i've got wallaby, i was trying to put there special edition rom, during the
instalation the progres bar in my pc moved once but on my wallaby didn't there was written that i have
to restart so i 've restarted my xda (i am afraid that is why it doesn't work) and after it i've done
same with my pc... on my XDA there is still written:
Upgrading
It will take about 5 minutes.
....
....
....
the active synch can't connect to my xda, my computer cannot recognize my xda.
please help
Related
hi i have a dead xda and i'm trying to fix it but it stops on 85% sometimes on 83%,i'm using the copy of cab file to sd card and runnig it from xda anyone can tel me how to get over this? i have removed it from charger and put the file on the sd card,the progress bar went to 99% then flash failed,now when i restart it windows work but very slowly and after reinstalling the rsu from pc by sync it gives me that message on 1%,how to fix it??!!
xda developers can u help me?
xda-developers can you tell me how to get over this 1% error?plz
Wer can only refer you to a really large number of postings on this forum. We tried playing with Radio upgrades, but we have not yet reached a point where any of this research is useful for those that have lost their radios in upgrades/downgrades.
Frankly: the Radio Stack Upgrade procedure frightens us: even if people play by the rules, and do the officially Right Thing(tm), things go wrong way too often for us to be telling people to play around. Our general word is to not upgrade unless you know you're fixing a problem, and to otherwise leave it the hell alone.
Sorry...
thanx
thanx anyway you are very kind and usefull people,
My Xda went white, the screen, aft a failed update, I've tried and re-tried the update provided by Peter Poelman. It did not work, stops at 1%... what I then did was
a) restart the failed update xda, remove the SD card
b) Press the Volume button to start it, when the screen message appear, press exit not to continue the flashing
c) connect the xda to the Sync cable, with your PC's Active Sync.
d) Install your Program A, again
e) Restart the xda recovery using the SD card method , follow the instructions that for SD card boot-up... and hope it work
All the best
It worked for my xda which is now fully functional.
thanx for your help,when i try to recover by upgrading from sd,i don,t use it as start up,i just go to explorer by pressing the calander buttom then the action centre the start menu appears then i browse,i'll try to reinstall windows and restart the prossedure hope it will fix it thanx.
ahh,it's not charging it happend with me in other times and programme A refuse to start,it says please connect your device to a/c adaptor,how to simulate it that the the unit charging or bypass the charging test?
Hi Guest,
Apologies in replying late, Im GUEST1 actually, jus regustered, anyway I forgot that you have to remove your SIM card before doing this, u may need to try a few times, I tried about 5-6 time before it worked. Good luck...
Hi 9DIV !
It is true ?
If I connect to activesync and run ruu upgrade I have the error message:
please connect ac adapter.
What is wrong ?
Regards,
Sebi
Same Here
I've read all the posts on this subject over the last week and I've had no luck.
Once the XDA is rebooted after several minutes it is possible to get activesync to recognise the XDA, but you cannot use the official O2 install software again as it thinks the XDA is not connection to the PSU even if it is.
I have tried SD card solutions, including at least 3 versions of the RSUpgrade.sa some have got past 1% but none have managed the full 100%.
I would add that if once connected to active sync you delete the shortcuts in windows/startup you can reboot and the XDA will quickly go to the today page complete with the startup bar...
You are right to say that as regards to PSU, becuase the flashing software needs to check the power supply, and too ensure that of supply power is not at risk of loss of power during ROM flashing.
You cannot use the offical O2 to install, because that would be downgrading the ROM version and would likely damage your unit.
As i mentioned earlier, use the one from Peter Poelman, prepare the SD card. I have to use my friend's NEC's PDA to write to my SD card for re-builting the unit's ROM.
Maybe can try this (no guarantees)
1)As you reboot your broken unit, till it show the Today's screen
2)connect using your power adpator to charge it full. I have problem with this step, and tried several times(using reset button) before it started charging(i.e. your unit will show continous orange light) when fully charged (green light)
3) connect to active sync and install the Program A. Do the SD thingy.
hope this helps
regards ---------- 9DIV
I have the O2 XDA EXEC and just done the the upgrade sucessfully.
I was now trying to install the extra software clearview PDF.
Disaster struck me down, as i was installing it the installation got stuck at the end for a good few minutes so i decided to disconnect and reinstall it.
After a soft reset the the XDA will no longer go past the first splash screen which also displays all the rom details.
I have tried to reinstall the fresh ROM agian and again but the PC will not recognise the USB device.
PLEASE HELP AS I AM REALLY STARTING TO PANIC
errr....you got xda exec????
emm....exec is under universal...not alpine....anyway...which rom you use when upgrading ???
sayekm said:
I have the O2 XDA EXEC and just done the the upgrade sucessfully.
I was now trying to install the extra software clearview PDF.
Disaster struck me down, as i was installing it the installation got stuck at the end for a good few minutes so i decided to disconnect and reinstall it.
After a soft reset the the XDA will no longer go past the first splash screen which also displays all the rom details.
I have tried to reinstall the fresh ROM agian and again but the PC will not recognise the USB device.
PLEASE HELP AS I AM REALLY STARTING TO PANIC
Click to expand...
Click to collapse
restart your pc and connect to your exec , try to flush rom agian , you should be ok
Dear All
Any help is appreciated. !
I installed lastest AKUU bootloader update while the lastes Rom Update existing at My Jasjar..
Than there were some software problems thats why dediced to make Hard Reset and Fully new Roms to my device...
And night mare started...
While at Connection to Active Sync I wanted to install latest update.. Suddenly It said there is no connection ... Connect your device and try to ... etc..
I restarted computer, tried again .. Now there is no Active Sync connection .. It says no usb coonection or mulfunction etc..
Removed battery ... SIM , SD and wait 1 hour.. than tried...
Nothing.. Than i tried without Ecvtive Connection Hard Reset..
It worked ...But disappointed again ... It sadi hard reset will start ... push 0 .. I did ... screen became Black and.. nothing happened...
Now for last 24 hours I m trying but no hard or soft reset or Power button .. nothing is working..
I charged battery all night tried again .. Nothin..
Searched iMate Site Forum ...
Saw some more people has the same problem ...
And technicians answer are not solving anything...
please help !!!
Hi,
Please try to reinstall teh new ROM again. Ignore the computer message "device not reconized" and the active sync symbol in grey!
trying...
But update programme gives COINNECTION error...
What to do !!!
Hi all, Hopefully some wise person can assist me.
I downloaded a ROM update for my XDA11i from this site :Alpine_Ext-1.11.162_Radio-1.04_O2stuffstripped_Camera_Fixed which was highlighted for a Alpine. However on running the update you get a picture of a MDA and a message "The ROM upgrade utility does not design for your device. Please get proper ROM upgrade utility and try again"
Unfortunatly my XDA11i is now stuck on a blank screen with Serial V1.01 and is not recognised by activsync or My computer. However in the cradle the screen shows USB V1.01
I have tried installing the official O2 ROM update: AP_O2UK_11100_169_10000_ShipXdaIIi but get the following message Error 101: connection error. I assume because my XDA is not recognised by Activsync.
I have spent days trawling the forum and trying the various solutions to no avail. Most of the links are dead as in archive.
1. On reset and hard reset the serial text only dims.
2. I tried the process posted by CelticLo and copied a ROM image to a SD card, however again on hard reset the sserial text only dims.
Any assistance would be very much appreciated.
Have you tried updating to the latest version of Active Sync on XP
or following the guide for Vista
Take off battery. wait for about 10 hrs. put back battery and switch on the power.
Thanks for the tip's
I have tried Activesync on XP and Vista still does not work.
I have removed the battery for two days and recharged it through the cradle, on returning the battery and switching on. It returned to the serial screen.
I tried flashing with the following rom : [Maxishare_net]alpine-1.11.171-radio-1.04-bluetooth-patched-camera-fixed again i get the message it is the wrong ROM??
I can not understand why I keep getting the wrong ROM message as it is definetly a XDA IIi PH10C
thanks anyway
Furkinl said:
I have tried Activesync on XP and Vista still does not work.
I have removed the battery for two days and recharged it through the cradle, on returning the battery and switching on. It returned to the serial screen.
I tried flashing with the following rom : [Maxishare_net]alpine-1.11.171-radio-1.04-bluetooth-patched-camera-fixed again i get the message it is the wrong ROM??
I can not understand why I keep getting the wrong ROM message as it is definetly a XDA IIi PH10C
thanks anyway
Click to expand...
Click to collapse
erm u are trying to flash on a pc running vista?? thats your problem, u cannot flash on a vista pc, xp home/pro ONLY!
Thanks for the advice, tried on XP and it worked fine, it would seem that activsync was not required in this case. At least my XDA is ALIVE for now.
many thanks
You simply could revive it again by Resetting it via the stylus
thnx 4 all the soloutionsss
i had same problem , but once i tried it on xp, its works for me, my ppc now is refresh installed,
thnxx
qtek 2020i
for information the french rom is available on this place http://www.planete-htc.com/index.php?mod=download choose dangaard section there is two files to download
1. choose 2020i dangaard rom
you can not use it
2 download the radio file
it contains an exe called upgradeut make it in the directory of your dangaard folder and you will be able to flash it
it work also for pda stuck in serial usb
voila
qtek 2020i
radio file 1.04 two mega
do a hardware resett and it should be the phone back to defaults
XDA IIi V 1.01 Serial /USB
Hello,
I tried to update my XDA IIi from a new rom version found at o2.ie website but my XDA IIi is stuck and showing Serial on top and v 1.01 at botom. When i attach it with cardle it shows USB instead of serial.
I have tried Almost everything that i found on this forum in last three days.
Hard reset / soft reset/ new installation using different version etc.. but nothing worked for me..
Now I am really confused and can't find what to do.. Can any one from XDA gurus/ developer help me and sumarize what should i do?
Thanks in Advance
Zeeshan
Yes, i have the same problem i did exactly what was done above me pls can someone help!!!!!!!!!
Furkinl said:
Hi all, Hopefully some wise person can assist me.
I downloaded a ROM update for my XDA11i from this site :Alpine_Ext-1.11.162_Radio-1.04_O2stuffstripped_Camera_Fixed which was highlighted for a Alpine. However on running the update you get a picture of a MDA and a message "The ROM upgrade utility does not design for your device. Please get proper ROM upgrade utility and try again"
Unfortunatly my XDA11i is now stuck on a blank screen with Serial V1.01 and is not recognised by activsync or My computer. However in the cradle the screen shows USB V1.01
I have tried installing the official O2 ROM update: AP_O2UK_11100_169_10000_ShipXdaIIi but get the following message Error 101: connection error. I assume because my XDA is not recognised by Activsync.
I have spent days trawling the forum and trying the various solutions to no avail. Most of the links are dead as in archive.
1. On reset and hard reset the serial text only dims.
2. I tried the process posted by CelticLo and copied a ROM image to a SD card, however again on hard reset the sserial text only dims.
Any assistance would be very much appreciated.
Click to expand...
Click to collapse
Where can I download this rom?
Alpine_Ext-1.11.162_Radio-1.04_O2stuffstripped_Camera_Fixed
Thanks in advance
Chet
look and lern
put qtek 2020i in stativ (conect to pc via usb)and push power ( on screen will apear USB and v1.01), and you dezarhive :astel_wwe_11100_112_10200_ship, and doble klik on AlUpgradeUt and bios at ppc wil be update !!!!! This is all, the ppc will be now reinstaling, be patient and wait until will be reinstaled (25 min)
i was upgrading my prophet but wen it was reboot it stucked on 3 colour screen and stoped and when i connect USB the computer give sound tht a device got connected but the prophet dont show any sign that a light which get on when we connect usb or chraging adapter and the active sync only shows an error in computer when i unconnect the usb,.,.,.,.please please help senior member's.,.,.,.,.,i would be very thankful to u
regardz.,
Since you could enter the 3-colour screen, your prophet would not have been bricked. Check this forum and wiki, try to update it via different methods.