Related
My Jam has recently decided that I dont' have any bluetooth hardware.
I have seen people complaining about this problem after they updated Radio or ROM - but I haven't done a single thing with my JAM. What they hellis going on. This thing is total piece of garbage....
you need to soft reset it
i have the same problem plus i have no audio on my phone..you can say that again man. abviously i already made a soft reset been doin it for 2 days now! damn! :x help anyone?
This is total garbage. How can a phone just start malfunctioning like that for no reason? This is pathetic.
I have an experience as: I have installed the radio scheduler which I can set to turn BT on and off as pre-scheduled. During the time the BT is off as scheduled, I manually turn it ON then the device say: No BT Hardware. During the time BT is ON as scheduled, I turn it OFF then ON again, no any problem's arised. When I uninstall the Scheduler software, everything's OK. But because I need radio scheduler application to turn GSM/BT ON and OFF automatically as my schedule so I decide not to touch the BT Icon in the bottom tray when BT is off. Without that problem the software run perfectly.
My XDAmini's BT is perfectly paired and worked with my Jabra BT 258. For Async function with my laptop, I use BT Tool 1.0 patch.
So for your cases, I think there is some software have been installed to turn ON/OFF BT function in lower level than the Microsoft's BT stack. Then when MS's BT stack come to check the hardware has been turn OFF, it found NO BT Hardware.
Hope the explanation may help.
I've the same problem with a french ROM. There is a message that told "no bluetooth hardware on this device" but at sometimes il works for a limited time.
I've this problem only under 1.06 ROM not with 1.03.
I need help to resolve this. Soft reset and hard reset change nothing as reflashing with 1.06
Help needing :?
Normally the issue was going to be fixed
Normally the issue was going to be fixed in the 1.06 see reporting on issue
Well.... I had the same message before when I upgraded to MA_DANG_WWE_10600_115_10500_SHIP. Then after a hard reset the problem gone. But his rom is not so stable.
Now I'm using the ma_cdlsku1_10600_110_10500_ship but override with the US radio to 110. And I can say is the most stable I had try on others.
After every soft reset my BT headset will paired by it self with my XDAmini, not like the others which I need to pair on manually. But only one thing is when the BT converage is out of range it had to pair them again. Anyway this is better then nothing.
Note: the radio 110 overiding is not for BT improvement. Just that is for the radio signal upgrade.
Hope this help.
When you want to enable the bluetooth try to make it also discoverable to other devices. This will enable for sure the blue tooth and you will not get again a "No bluetooth hardware" error.
Not true. I have mine discoverable, but this problem seems to occur randomly.
what error messege do you get? i fixed mine by installing that buzztooth or switch application im not sure of the name, but just try to remember the application that you tried/installed before that enable/disables the bluetooth with a shortcut. ow yea and a little tweak on the registry fixed mine..
bogs said:
what error messege do you get? i fixed mine by installing that buzztooth or switch application im not sure of the name, but just try to remember the application that you tried/installed before that enable/disables the bluetooth with a shortcut. ow yea and a little tweak on the registry fixed mine..
Click to expand...
Click to collapse
Explain de REGISTRY trick on the prog you install. Give us more information please
what error are you getting? i modified the registry because i had an license expired error..if thats not the error dont bother with the registry. anyway about the bluetooth device not found error i found out the SKtools application is doing it..so the easiest way would be a restore registry on the SKtools app then soft restart.
how long does it take for you guys on a HardReset to get to the startmenu?
Same problems here:
1- No BT HW found
2- BT SW detects Flight Mode on and a message pop up saying to turn off FlightM to activate BT...but FlightMode is turned off yet! than the message is in Spanish and my ROM is Italian....
Really an annoying problem!!!
I hope that HTC has been informed about this!
Today, i've got one more this error. I'll made a screen copy when it happen.
When the problem occurs, there is no possibility to select bluetooth, all is grey
How does i take a old bt manager (before upgrading it works very well)
Tx
I have upgraded to the new O2 Rom 169 and all seemed ok, until I started to install my bluetooth head set.
Since I upgraded my radio ROM to 1.03 I have lost the connections to my headset.
Prior to the upgrade it worked perfectly, now the recieve functions just will not work.
I have down graded to the radio 1.00 ROM but the same thing is happening. So the upgrade seems to have corrupted something more important.
Can anyone help here?
Downgrade to previous ROM
I have now downgraded to the previous ROM 1.11.162WWE, and that seems to have solved the problem.
I have installed the Radio ROM update and that seems to work OK now, so I will stick to this for the moment, unless someone has any better ideas!
Hello,
I had the same problem. It seems, the old bluetooth software won't work with the new radio rom. I tried my bluetooth connection before restoring my old stuff from backup, and it's ok. I didn't have any serious things in my backup, so I reinstalled my software from install cd's - sorry, I had no time to figure out, wich software causes this issue, but hope this information will help you.
Z.
i also having problem with my bluetooth but I cant say the problem is from new radio ROM or others because i dont know the real cause. A message display and wrote
"Sorry! Bluetooth can no longer be used because the licence is expired"
"BDA ff:ff:ff:ff:ff:ff: Key:E3E534E19B3E8214C543A73C0A8B9A9074DD3B1753515CD8"
after that, bluetooth will off automatically.
I have found since the upgrade to the new radio, thanks PUG.
That my Handsfree and Headset Bluetooth issues have lessened.
A few little glitches but will be on the outlook for another patch or upgrade in the future :roll:
Hmm,
I have radio 1.00.00 version with t he original Asia ROM and something funny has happened:
Since the beginning, I successfully connected to Logitech and Hello II BlueT headsets + a generic car BT handsfree.
I had to perform a hard reset after one of my progs messed the registry and reinstall everything (less the troublesome prog <g>).
Since then, the BlueT handsfree does not work properly: I hear the ring but there is no volume control from the headset and I hear nothing + mike does not work. The rest of the BT conections work flawlessly, except for some rare disconnects from my BlueT RBT-2001 GPS.
The story in this thread is not encouraging but one thing is clear - the BT problems that I have are with the original radio and EROM and not after an upgrade. I have no clue what all this means except for the fact that tere is something quite problematic w/ the Xda IIi BT connectivity that I didn't have w/ any of my previous PDAs.
I thought to u/g the radio version only but decided to go for a full u/g (less the O2 stuff), hoping that my BT problems will go away.
Please correct me if I'm wrong - should I go ahead with the PUG O2-less upgrade or should I keep the old (but clearly buggy) versions?
Maybe all the problems that we have are connected to specific manufacturing HTC batches? Has anyone researched this? Is there any info correlating between problems and Xda IIi serial numbers?
Best regrads,
Al
Hi,
I've just started using a GPS receiver with my BA.
The problem that I face is that while using GPS normal phone operations cease to work... means i can not receive any phone calls... though the phone shows gsm signals... and its varying strengths..
also,.. after closing the gps... i can not make a call.. the phone function hangs at the dialing stage... and only a soft reset solves the problem.
i'm using radio 1.15
this render my phone unusable till the time i soft reset my phone after navigation.
Can someone pls help me out on it,
update:
MS stack creates the problem. i've to change the port everytime to make gps work and phone does not function after gps is initialized.
when i installed broadcomm 1.7 test stack from helmi... there were no problems with the gps or any phone functions
but the downside is that BT handsfree stops working...only BT audio works.
tried installing 1.6 stack also, but do not know how gto disable the MS stack... after installing 1.6 stack... MS stack is still active
Hello. My X1i has a bluetooth issue for turning on the bluetooth. I think ti was affected by some application, or may be conflict between the rom and application? My rom is itje touch experience v2.1, and I tried to solve this problem by uninstalling all my application on the device but it doesn't help. Then I did a hard reset and the bluetooth works again but after I install my applications, it fails to turn on again. I can't figure out what is affecting the bluetooth. Any idea please???
after a hard reset install your apps one by one and check bluetooth connectivity after every app installation to know what affects your bluetooth connectivity. also check carefully apps compatibility with x1 before installing by reading others comments. by the way what apps did you install?
well i installed a lot of app but most of works fine in my stock rom before. The weird thing is that even though i uninstall all of the them, it doesn't fix the problem...
Anyway, thanks for our suggestion. i will flash a R2A rom when i finish my class 2 weeks later. Just suck it up for pouple weeks
Hi to all.
Do someone have problems with the activation of the bluetooth feature on this pda?
For example when I try to enable it on comm manager, my hd2 simply freeze, and the only solution is to reset the equipment. What is strange is that when it comes back the bluetooth is on.
I don't have tomtom installed, the rom is 1.48 wwe htc and I have this problem with 1.43 rom also.
Please can someone help me with this subject.
Best regards,
Someone ??
same thing happen to me
and i have another problem
i cant send files via bluetooth using resco explorer ??
but by using the normal file exlporer no problem
anyone have the same problem ?
im using miri 1.2 rom
Up Up .. Someone with similar problems ...
Hi,
I had a similar problem with my HD2.
Activate BT took a very long time and failed with an error message, I can't remember it but it says that it wasn't able to activate BT.
I did a HARD reset and everything went ok !
same problem here. I use bluetooth for the carkit in my car. But since bluetooth is a huge battery drain, i turn off bluetooth the moment i get out of my car again. And turn it on when i get into my car. All via the comm manager. Here on miri 2.0 based on the 1.61 rom the problem is also present. The only way to fix the bluetooth freeze/malfunction is to softreset the device. At startup of the device bluetooth is indeed turned on....
Me too having the same problem
It got struck when I've tried sending files to my friend's phone via Bluetooth. I restarted my phone to get it up (luckily it got up with Bluetooth on)
today the bluetooth freezed when im trying to turn it on via comm manager
softreset solve it
im using miri 1.2 rom
in this time the sms get stuck in outbox...
its the same problem.
try pinch2zoom in fileexplorer....it doesnt work, and alarm doesnt ring too...
me too
I have the same problem and still do :-(
My HD2 freezes when I connect to my PC through comm manager/ActiveSync. The only solution is soft-reset!!
I have latest ROM 1.66.403.1 DAN
I can't figure out why and how to fix it... anyone?
Active Syn BT Freeze
I have the same Active Sync / BT freeze problem. I use Miri V.22 6.5.x. Believe having this problem since V 17.x. I don't remember having this when I first flashed ROMs in March.
Any update on the issue?
Thanks
Possible solution
This seems to have solved my problem.
http://forum.xda-developers.com/showpost.php?p=7025327&postcount=23
I could not delete/rename BtCoreIf, but just deleting BtSdkCE30.dll and making BTTrayCE.exe as a shortcut in startup is working so far. Two long syncs with no freezes.
I hope this helps others.
It froze after an hour connected. Better but not great.
Finally managed to delete BtCoreIf.dll. Trying the next few days to see if it solves the BT problem.
fixed
I found out that my BT was freezing because of third party application which I have installed in my phone. I uninstall it and never froze since
Fixed as well
Thanks. Yes, this seems to be the case here as well. I managed to follow the instructions I provided above, deleting the two files TomTom had changed, and now I'm back to having my BT Active Sync working well again.