Hello. My X1i has a bluetooth issue for turning on the bluetooth. I think ti was affected by some application, or may be conflict between the rom and application? My rom is itje touch experience v2.1, and I tried to solve this problem by uninstalling all my application on the device but it doesn't help. Then I did a hard reset and the bluetooth works again but after I install my applications, it fails to turn on again. I can't figure out what is affecting the bluetooth. Any idea please???
after a hard reset install your apps one by one and check bluetooth connectivity after every app installation to know what affects your bluetooth connectivity. also check carefully apps compatibility with x1 before installing by reading others comments. by the way what apps did you install?
well i installed a lot of app but most of works fine in my stock rom before. The weird thing is that even though i uninstall all of the them, it doesn't fix the problem...
Anyway, thanks for our suggestion. i will flash a R2A rom when i finish my class 2 weeks later. Just suck it up for pouple weeks
Related
My Jam has recently decided that I dont' have any bluetooth hardware.
I have seen people complaining about this problem after they updated Radio or ROM - but I haven't done a single thing with my JAM. What they hellis going on. This thing is total piece of garbage....
you need to soft reset it
i have the same problem plus i have no audio on my phone..you can say that again man. abviously i already made a soft reset been doin it for 2 days now! damn! :x help anyone?
This is total garbage. How can a phone just start malfunctioning like that for no reason? This is pathetic.
I have an experience as: I have installed the radio scheduler which I can set to turn BT on and off as pre-scheduled. During the time the BT is off as scheduled, I manually turn it ON then the device say: No BT Hardware. During the time BT is ON as scheduled, I turn it OFF then ON again, no any problem's arised. When I uninstall the Scheduler software, everything's OK. But because I need radio scheduler application to turn GSM/BT ON and OFF automatically as my schedule so I decide not to touch the BT Icon in the bottom tray when BT is off. Without that problem the software run perfectly.
My XDAmini's BT is perfectly paired and worked with my Jabra BT 258. For Async function with my laptop, I use BT Tool 1.0 patch.
So for your cases, I think there is some software have been installed to turn ON/OFF BT function in lower level than the Microsoft's BT stack. Then when MS's BT stack come to check the hardware has been turn OFF, it found NO BT Hardware.
Hope the explanation may help.
I've the same problem with a french ROM. There is a message that told "no bluetooth hardware on this device" but at sometimes il works for a limited time.
I've this problem only under 1.06 ROM not with 1.03.
I need help to resolve this. Soft reset and hard reset change nothing as reflashing with 1.06
Help needing :?
Normally the issue was going to be fixed
Normally the issue was going to be fixed in the 1.06 see reporting on issue
Well.... I had the same message before when I upgraded to MA_DANG_WWE_10600_115_10500_SHIP. Then after a hard reset the problem gone. But his rom is not so stable.
Now I'm using the ma_cdlsku1_10600_110_10500_ship but override with the US radio to 110. And I can say is the most stable I had try on others.
After every soft reset my BT headset will paired by it self with my XDAmini, not like the others which I need to pair on manually. But only one thing is when the BT converage is out of range it had to pair them again. Anyway this is better then nothing.
Note: the radio 110 overiding is not for BT improvement. Just that is for the radio signal upgrade.
Hope this help.
When you want to enable the bluetooth try to make it also discoverable to other devices. This will enable for sure the blue tooth and you will not get again a "No bluetooth hardware" error.
Not true. I have mine discoverable, but this problem seems to occur randomly.
what error messege do you get? i fixed mine by installing that buzztooth or switch application im not sure of the name, but just try to remember the application that you tried/installed before that enable/disables the bluetooth with a shortcut. ow yea and a little tweak on the registry fixed mine..
bogs said:
what error messege do you get? i fixed mine by installing that buzztooth or switch application im not sure of the name, but just try to remember the application that you tried/installed before that enable/disables the bluetooth with a shortcut. ow yea and a little tweak on the registry fixed mine..
Click to expand...
Click to collapse
Explain de REGISTRY trick on the prog you install. Give us more information please
what error are you getting? i modified the registry because i had an license expired error..if thats not the error dont bother with the registry. anyway about the bluetooth device not found error i found out the SKtools application is doing it..so the easiest way would be a restore registry on the SKtools app then soft restart.
how long does it take for you guys on a HardReset to get to the startmenu?
Same problems here:
1- No BT HW found
2- BT SW detects Flight Mode on and a message pop up saying to turn off FlightM to activate BT...but FlightMode is turned off yet! than the message is in Spanish and my ROM is Italian....
Really an annoying problem!!!
I hope that HTC has been informed about this!
Today, i've got one more this error. I'll made a screen copy when it happen.
When the problem occurs, there is no possibility to select bluetooth, all is grey
How does i take a old bt manager (before upgrading it works very well)
Tx
Hey all
I keep getting "error with bluetooth hardware" everytime I search for other bluetooth devices.
It was working fine and had NO problems until all of a sudden the connection was dropped. It was then that reconnection was no longer working.
I use fit4cat and had no problems before and I doubt it had anything to do with this program.
However, I did install netfront, IM+, pocket plus, pocket weather recently and I have a feeling one of these installations affected the bluetooth.
I uninstalled pocket plus and weather but still no help.
anyone?...
The only for-sure way to determine if you have a hardware problem is a hard reset. Does the problem still occur after you hard reset? With backup programs like spb backup (free trial available) its trivial to create a backup first that will fully restore your software afterwards. I've been hard resetting regularly lately since I've been playing with the widcomm development stack.
I've tried a hard reset multiple times and still, the same message. Its really weird. I think I'm the only one with this problem. But any how I've gotten replacement and there's no problems yet.
Hello all. This is my first time posting a new thread although I've been lurking around here for a while soaking up all the information from this wonderful site. That said, I have been researching my problem for days now both here and on google and have found no solutions that work. So I'll see if there's anyone here who can help. Here goes....
I have recently flashed DCD's 3.2.6 ROM on my Verizon XV6800 and it works great (love the aGPS too, Thanks GC14) in every area but my car. I have a 2004 Audi A4 with the RNS-E Nav system with integrated bluetooth. Before I flashed to DCD, I had the original stock ROM (2.09.605.8 with Radio 1.30.00) which gave me full functionality with Jetware Mobile (Phonebook and Recent, Received & Missed Calls all transferred). Now, with DCD, it'll only connect to the car and won't transfer anything. If I try to load Jetware, it'll just lock up my phone while I'm connected to the car. Thanks in advance for any help you can provide.
No one else has this problem or a fix for it?
TGabriele said:
No one else has this problem or a fix for it?
Click to expand...
Click to collapse
I wish I was rich enough to afford such a car, then I could maybe help you out. LOL
But I would gladly accept such a car as payment for figuring out your problem.
Nevermind that the car is an Audi. Does anyone else have this problem with a factory BT system that transfers the phonebook to their car.
I had this same issue on my X3 and it seemed to be the way the PPC wanted to transfer the phonebook was by using some file transfer protocol the car did not understand. I could sync it and make and receive calls but no phonebook. Took it to the sprint store and we tried a blackberry and a standard moto handset. The blackberry did not sync the phonebook either but the standard moto phone did. I don’t think it’s possible based on the profiles in the car so I gave up on the phonebook. Try changing the bluetooth stack in the rom, you will have have to make your own rom and beware of the stack you use to make sure it is one for your phone.
I flashed DCD's rom using the kitchen, so making a custom rom from there is no problem to me. What I'm not sure of is how to change the bluetooth stack. I thought it is part of the hard coding for the OS? If you or someone else reading this thread has any information on this or can point me to some info on this it would be greatly appreciated.
I have the 6800 with DCD 3.2.6, and an Audi, with full phonebook transfer so I'll try to help you out:
1. Which 6800 radio are you using? I have found 3.42.50 to be the best as far as Audi bluetooth compatibility is concerned.
2. Jetware will not work with WM 6.1 on the 6800, but you don't need it, since 6.1 included phonebook transfer enhancements.
3. What version of Audi software are you at? There have been several releases since your year. You should be able to get more info from www.navplus.us and of course from your stealer.
4. You do have your bluetooth settings set for "discoverable", right? And, (I don't know why this is the case) it seems when OBEX is on, the phonebook and other items transfer quicker.
If you have the 6800 radio and Audi software updated, you should have no problem. Jetware is no longer necessary.
1. I am using radio ROM 3.42.50
2. The reason I loaded Jetware is to have it sort my contacts by Last,
First. Is there another way to do this?
3. I am running sw0200 on my RNS-E, but was considering moving up to
sw0260.
4. I haven't tried this, but I will.
Lately I've also had the issue where if the phone is connected to the car for a while, the bluetooth on the phone will shut itself off and not turn back on until I do it manually. I'm beginning to wonder if I should just hard reset and start from scratch. Any ideas? Thanks in advance.
I'm sure there's a reg tweak for listing First name first in contacts. Hunt around here or at ppcgeeks. If you want to stay on 6.1 jetware will not work (unless they release a new version).
Definitely update the Audi software to the newest version.
DCD has done nicely fixing power settings in the last few ROMS to solve the bluetooth shutting off issue, although when memory gets very low, it may still happen. You must have some other program or process running that sucks up memory if you are still experiencing this.
It never hurts to hard reset, as long as you have the time.
So, I've updated to SW0260 and done a hard reset and I'm still experiencing problems. Do you have any more suggestions? Thanks in advance.
TGabriele said:
So, I've updated to SW0260 and done a hard reset and I'm still experiencing problems. Do you have any more suggestions? Thanks in advance.
Click to expand...
Click to collapse
I'm running an after market HU (Pioneer AVH-P4000DVD) and DCD's latest ROM, and Jetware works fine on mine. Just re-transfered my phone book earlier today....
Hi to all.
Do someone have problems with the activation of the bluetooth feature on this pda?
For example when I try to enable it on comm manager, my hd2 simply freeze, and the only solution is to reset the equipment. What is strange is that when it comes back the bluetooth is on.
I don't have tomtom installed, the rom is 1.48 wwe htc and I have this problem with 1.43 rom also.
Please can someone help me with this subject.
Best regards,
Someone ??
same thing happen to me
and i have another problem
i cant send files via bluetooth using resco explorer ??
but by using the normal file exlporer no problem
anyone have the same problem ?
im using miri 1.2 rom
Up Up .. Someone with similar problems ...
Hi,
I had a similar problem with my HD2.
Activate BT took a very long time and failed with an error message, I can't remember it but it says that it wasn't able to activate BT.
I did a HARD reset and everything went ok !
same problem here. I use bluetooth for the carkit in my car. But since bluetooth is a huge battery drain, i turn off bluetooth the moment i get out of my car again. And turn it on when i get into my car. All via the comm manager. Here on miri 2.0 based on the 1.61 rom the problem is also present. The only way to fix the bluetooth freeze/malfunction is to softreset the device. At startup of the device bluetooth is indeed turned on....
Me too having the same problem
It got struck when I've tried sending files to my friend's phone via Bluetooth. I restarted my phone to get it up (luckily it got up with Bluetooth on)
today the bluetooth freezed when im trying to turn it on via comm manager
softreset solve it
im using miri 1.2 rom
in this time the sms get stuck in outbox...
its the same problem.
try pinch2zoom in fileexplorer....it doesnt work, and alarm doesnt ring too...
me too
I have the same problem and still do :-(
My HD2 freezes when I connect to my PC through comm manager/ActiveSync. The only solution is soft-reset!!
I have latest ROM 1.66.403.1 DAN
I can't figure out why and how to fix it... anyone?
Active Syn BT Freeze
I have the same Active Sync / BT freeze problem. I use Miri V.22 6.5.x. Believe having this problem since V 17.x. I don't remember having this when I first flashed ROMs in March.
Any update on the issue?
Thanks
Possible solution
This seems to have solved my problem.
http://forum.xda-developers.com/showpost.php?p=7025327&postcount=23
I could not delete/rename BtCoreIf, but just deleting BtSdkCE30.dll and making BTTrayCE.exe as a shortcut in startup is working so far. Two long syncs with no freezes.
I hope this helps others.
It froze after an hour connected. Better but not great.
Finally managed to delete BtCoreIf.dll. Trying the next few days to see if it solves the BT problem.
fixed
I found out that my BT was freezing because of third party application which I have installed in my phone. I uninstall it and never froze since
Fixed as well
Thanks. Yes, this seems to be the case here as well. I managed to follow the instructions I provided above, deleting the two files TomTom had changed, and now I'm back to having my BT Active Sync working well again.
Good morning fellow forum member. I've recently begun having some significant bluetooth connectivity issues with my continuum and Ford Sync system in my 2011 Fiesta. Now, before you start ranting about your loath for microsoft or Ford please hear me out. In theory, the Sync system, combined with bluetooth technology, is a great way to go hands free. It also allows for the coordination of the system and Pandora & Stitcher Radio on an Android phone.
Anyway, lately my bluetooth connection to my car has been causing FCs on my phone. They are the type of FCs that cause the "long-short-short-short" haptic feedback but doesn't throw a pop-up message describing the cause of the FC. So, when the feedback occurs the phone will sometimes lock up but it always disconnects the bluetooth. I don't use bluetooth in any other fashion so I can't be positive that it's not an issue with the car's bluettoth system.
With all of that said, is there an inherent issue with the bluetooth system on our phone? If so, is there a fix for this? I'm currently running the EC07-clean_new ROM. This was installed over the SCH-I400-EC07-FROYO-REL-PRODUCTION ROM. My broadband version iss:i400.0.6v.EC06, Kernel 2.6.32.9 and build SCH-I400.EC07.
Any help that you brilliant folks could offer would be much appreciated.
Thanks,
Ray
I run bluetooth constantly (it's the only way I talk on my phone, driving or not.) I've never run into this issue. Have you recently downloaded any new apps? I found that there are some apps that simply don't play well with our phones. Especially radio based apps (I.E. the issues a lot of us were having with gps based apps, or gps losing it's lock, after a while. Wireless tether 3.06 beta completely screwed my phone up... etc). The only other thing I could suggest is to drop your phone from the sync, and reconnect it... I do this with all my bluetooth devices at least twice a week as a matter of course. And if you want to experiment to see if it's sync or your phone, assuming you have bluetooth stack on your computer, you could connect it to your phone. Other than that, maybe find a friend that has bluetooth and connect it?
Thanks for the suggestions. The most recent app I have installed that uses a radio is the new Stitcher, though I have been having some issues with "My Tracks" FCing but I think that is another issue. Anyway, prior to your reply I found an app on the market called "bluetooth fix repair" It's free and I gave it a shot. I've also deleted the phone from my car's list and repaired them. So far so good. I have a bluetooth stereo headset I'll have to try. I probably have too many apps to begin with. I'll see about deleting some of the ones I don't really need.
Thanks again,
Ray
Reborn627 said:
Thanks for the suggestions. The most recent app I have installed that uses a radio is the new Stitcher, though I have been having some issues with "My Tracks" FCing but I think that is another issue. Anyway, prior to your reply I found an app on the market called "bluetooth fix repair" It's free and I gave it a shot. I've also deleted the phone from my car's list and repaired them. So far so good. I have a bluetooth stereo headset I'll have to try. I probably have too many apps to begin with. I'll see about deleting some of the ones I don't really need.
Thanks again,
Ray
Click to expand...
Click to collapse
I think you should be good with rourine disconnect/reconnect. Asfor too many apps, the only thing rhat matters there is storage space. Android wint let you run "too many" at once. Itll delete from ram as needed. I was just saying that certain apps dont seem to play well with others. But that is an android issue, not your phone in particular.
I'm not here for a long time. I'm here for a good time. To hell with the red wine. Pour me some moonshine. - King George
I'm totally stumped here. Yesterday I decided to reflash my phone. I figured any issues might be ironed out. It must be an app issue, although it is going to be a PIA to uninstall then reinstall each app and test the BT after each app install. I thought that it might be the trailblazer101 car cradle, desk cradle or the sticher apps that were giving me the problem but that doesn't seem to be the case. Maybe I'll try replacing the BT files with the ones from eclair to see if I end up with the same trouble. Any idea if that might cause more problems? Are the BT files android version specific?
Peace
EDIT: I've not swapped the BT files from eclair but I did spend an hour or so listening to Stitcher radio via a bluetooth headset. It doesn't seem to be a BT issue. More likely an issue with the connection to the Sync system itself. Connecting via bluetooth is no problem in the car. It's not until I attempt to engage a function other than the phone that an issue occurs. I may try to reflash the EC07-clean ROM and see if there was something with the EC07-Clean_new version that I've been running for the last few weeks.
OK, the BT issue seems to be corrected. I flashed adrenalyn's EC07-clean ROM and that seemed to do it. Something must have gotten corrupted. So, issue resolved...i guess.