Hi
Im one of those who has 1% error after upgrading RSU rom. Now the only possibility for us is to make SD card boottype with good gsm rom on it. To do it we need a serial cable and some soft (dunno now which called in bootloader as PC monitor) to sucesfully download it from working device. Is there anyone who has a working XDA1 device and serial cable and willing to help us ?
Thanks in advance for U answers and ideas
Lukasz
Related
HELP.... I was unable to upload my sx56 with the new 2003. I crashed my ROM... Any ideas on how to restore.
Rock
Tell me what you see from the display.
I can help!
Froozen SX56 while upgrading the ROM
Unfortunately my system crashed when i was upgrading my ROM this is for a AT&T SX56 Pocket PC which I wanted to unlocked so that I could use it with T-Mobile SIM card. Now the screen says :
Upgrading
It will take about 5 minutes...
I was trying to upgrade it with the xda-developer rom verison.
I dont have any backup also for this device please help and I do have a SD card and SD card reader also.
If the bootloader not be erased, you could still use SD to restore OS.
If the bootloader already damaged, the only solution is hardware solution.
I can help you to resolve all problems
How to restore using the SD please tell me.
I do get the bootloader mode when i pressed the power , navigator and reset button on the pda
shri62 said:
How to restore using the SD please tell me.
I do get the bootloader mode when i pressed the power , navigator and reset button on the pda
Click to expand...
Click to collapse
using Xdrit to write the OS to SD card via SD writer.
you can get Xdrit from xda-developers.com (do some search).
Need real help
cgigate said:
I can help you to resolve all problems
Click to expand...
Click to collapse
I had this stupid RadioStack crash that resulted in GSM ERROR that made my device unable to recharge the battery or run mobile function, so the status now is a ppc which has no phone and should always be conected to AC
when I consulted the Agent service tey claimed it's a motherboard error that would require a new baord, which'll cost me around 300$.
could you please help me!!
Cgaigate, is it possible to restore a corrupt radio stack using jtag, if you have the capability I can let people know.
GSM ERROR - RADIO STACK CRASH
Hi Smiley,
I crashed my Radio Stack, too. Has anyone an idea? Is it possible to repair? By myself?
I heard cgigate could help?
Bye
Yep - "GSM Error" in Wallaby Bootloader 5.15
Anyone got any ideas on fixing this one?
Cheers!
Andy
where do i get the XDA manipulator
http://wiki.xda-developers.com/index.php?pagename=XDAmanipulator
Thank you very much LumpiStefan for your timely response and for the link to get the XDA manipulator, i have been looking for it for so long. THANKS DEVELOPERS
I too appreciate the link, I have been searching for this for ages. Cheers.
.......Ib a n e
I really appreciate the link thanks
BR
wallaby usb flashing
hi there ,,can anyone tell why when i enter usb flash mode i cant flash via it wheni try to run a upgrade program it says plug in yor pda and on the pda screen all i get is usb flash mode,,connect usb cable now... but it is lso in my device manager i see my pda as a windows ce devices so what the hell is going on ?
pls dont tell me only way is via sd card surely it can be done via usb lead if so please can some post a step by step on how to flash via usb as i did so already from pc2002 to win2003 using the rom from xda developers and now i get a logo Ozup and underneath says ,,this os image is meant for microsoft employees or technicians bla bla bla
but i can enter boot loader fine access all the menus in bootloder my bootloder version is v5.15
pleaaaase someone help me
There are two possibilities to flash a device:
1. In Bootloader via SD Card
2. Normal booted device via Active Sync
But i do not know what you mean with USB Flash Mode
Stefan
thanks for replying back now i have new problem
i have a big problem and i think your the only person who can help me my problems occured when i went to flash my wallaby device with this rom ftp://xda:[email protected]_ENG.exe/
i wish i never bothered the device was perfectly running fine until i flashed it with this via usb it all was a succes when i done a hard reset i got a screen with a oz up logo and underneath it says "microsoft internal use only" this operating system image is meant for use only by microsoft employees and contractors ,,and the crazy thing is i cannot enter my bootloader which was v5.15 so i can flash it via sd card its vanished no bootloader only that screen and on the bottom right corner it says ,,g32s54,v4.08,3.04 when i plug it in usb all i get is a unknown device and i cannot flash it so please if there is a way even if its pretty technical i would be honoured if you can help me out i would be very grateful if u cn show me a way of getting the bootloader back many thanks
still no bootloader on my wallaby device
hi i,m really upset if i can only get acces to the bootloader i can atleast flash it via sd card so please if theres a way of getting back the bootloader or somehow flashing it back please any help would be appreciated
radio stack
had same sort of problem this is how i fixed it go here
http://wiki.xda-developers.com/index.php?pagename=Wallaby_HT_GSMError
don't use the 4.16 use the rs 4.21 when i did the upgrade i was then able to connect to active sync then changed the rom try the special rom 1.2
hope this helps
mate the problem i have is that i cant acces the bootloader for me to do anything its gone and this happened after using that dodgy rom
all i want to no is there a way of putting back the bootloader on to the device as its not there its been somehow erased after the flash i done
mate if you try what i said to try this should help you to connect your phone back to your pc then you can change the rom from there you shold get bootloader back when you put a new rom on
I followed instructions (http://forum.xda-developers.com/showthread.php?t=244549), and I executed 3.17.03_ENG.exe after xdaunlock.exe failed.
My device is now unusable, some error occured regarding usb connection and now all I have on pocket pc is upgrading bar with 0%.....cant reset cant do anything?!?
Please help!
If I understand corectly I need to put boot on my sd card.....
look here
this might help http://wiki.xda-developers.com/index.php?pagename=Wallaby_HT_FlashSD
thnx....and....where can I find rom image?
http://www.romkitchen.de/
no bootloader on wallaby
hello again ,,to jay05 thxs for replying back but u dont seem to understand what i am saying i will say it more clearly hopefully someone can help ,
ok there is no bootloader on the device its been erased when i do a hardreset nothing happens so can someone please tell me how to put back the bootloader on the device ,,its impossible via sd card and when i connect it via usb cable all i get in my device manager is a usb device as"HTC USB SYNC"
ok so there must be software that can somehow flash this pda as the computer recognises it as a htc usb sync ,,i done a search on google and found several software that runs on similar setups like the treo but none for wallaby so please someone there must be a way to upload the bootloader back to the device via usb cable pls someone help me out i also tried the xda developer tool pnewbootloader no use nothing happens
there must some kind of special HTC software that can flash the chips on the pda similar to the jtag technique but thru usb as again i repeat my comp sees the pda as a htc usb sync
i hope someone can help
many thanks and a happy new year
I have just bought a singapore Sim locked handset .. I need to Flash a english rom and unlock it .. i have downloaded the rom the Hard spl but before that i was trying to update using SEUS but it went to the bootloader mode and itdetected the drivers then suddenly says one of the usb is malfunctioned and cannot reconize the device now i have tried 3 systems but nogo...i need help to get hardspl installed without using the usb port and a computer and then i can flash a eng rom on it using msd card.. and i have tried hard reset/chking in bootloader mode/and active sync also not working
have you try this?
Program --- Setting -- Connection ---USB to PC
clear ..... Enable advanced network funcionality
(Clear this check box if Activesync does not recognize the device)
goodluck
Or flash it with a generic ROM using the microsd method.
EDIT: Never mind. Read the first post too quick.
Thanks a lot .. it worked .....i unchecked it and it worked i have a english version of it now ..now one more problem left is simlock any solutions for that???? thnks a lot for helping me appreciated
does anyone know how to upgrade the bootloader on the himalaya at the moment mine reads at the top of the screen SERIAL and at the bottom V1.01.
I have a file which i think is a upgrade [boot_1.06.nb0]
but i have to need to know the do's and dont's as i would think this would be if done wrong brick my himalaya?
any help or links would be thankfull?
advanced15 said:
does anyone know how to upgrade the bootloader on the himalaya at the moment mine reads at the top of the screen SERIAL and at the bottom V1.01.
I have a file which i think is a upgrade [boot_1.06.nb0]
but i have to need to know the do's and dont's as i would think this would be if done wrong brick my himalaya?
any help or links would be thankfull?
Click to expand...
Click to collapse
The only one question is
Why the hell you want to do that?
I have 1.01 also on my second today-use himalaya and it is really stable and works same as 1.06, but has some debugging output in mtty which is so useful
I tried also to upgrade it and I failed.
I have an O2 XDA II with windows mobile 2003 on it.
When in Bootloader Mode it says v1.01
when connected to the PC it says USB so i know its working in its own little way
I am trying to upgrade it to windows mobile 6.5.
I have tried everything so far and searched forums and tried things suggested on them but i just cant seem to do it.
Can someone send me a guide on how to do it please.
id be very greatful.
Thanks in advance.
mikeymcmk said:
I have an O2 XDA II with windows mobile 2003 on it.
When in Bootloader Mode it says v1.01
when connected to the PC it says USB so i know its working in its own little way
I am trying to upgrade it to windows mobile 6.5.
I have tried everything so far and searched forums and tried things suggested on them but i just cant seem to do it.
Can someone send me a guide on how to do it please.
id be very greatful.
Thanks in advance.
Click to expand...
Click to collapse
Hay mickey tell me that are you able to sync data or contects,msgs etc with system without disconnecting ?????????
or sometimes connection disconnects automatically ????/
if yes then put something stable thing in between data cable & device.
reply soon
KAASHP said:
Hay mickey tell me that are you able to sync data or contects,msgs etc with system without disconnecting ?????????
or sometimes connection disconnects automatically ????/
if yes then put something stable thing in between data cable & device.
reply soon
Click to expand...
Click to collapse
if anybody have same problem do as per my suggestion
put something in between data cable & device if you connect it without disconnection then it works flash the rom after putting it in bootloader mode
Don't do it
the bootloader is the main program which executes the system programs so avoid to upgrade bootloder.
the result will be permanent damage to your lovable device...
it can't boot more. so be careful.
no need to upgrade it as per my suggestion.