Database Users

start bluetooth activesync shortcut

is there a way to make a shortcut to start a bluetooth activesync connection? it would be real useful with software that lets you display shortcuts on the today screen, since all ud need to do is hit the shortcut, and ur connecting via bluetooth.
i hate having to start activesync > go into tools > then connect via bluetooth all the time. is it possible to make it go in one click?
thanks!

I do it by going to the Bluetooth Manager on the toolbar.
Ian

How to synchronise via bluetooth using activesync 4.1?

Good morning
Can someone please tell me how to synchronise XDA Exec via bluetooth using Activesync 4.1. I do not have Win XP SP2 installed and do not want to install it (If I can help it!!!!!!). I have spent sometime trying to work it out but have not had any luck.
A detailed post will be very much appreciated.[/b]

I take it no one knows or no one syncs their Exec via bluetooth!!!!!! Anyway, if I have worked it out, if someone would like to know please do not hesitate to ask.

Synchronising via bluetooth is a breeze, its beautiful. Cuz when u sync via cable your machine starts charging your device too and if I am not mistaken, keep on charging and taking it off witout full charge your battery gets damaged. Please correct me if I am wrong.
But when u sync via bluetooth u dont have to worry about the battery getting damaged and dont have to worry about those messy cable(s).

Setup Instructions
Step 1:
- Go to BT Settings on PC and enable "New Incoming Connection"
- On my PC it opens up "COM3"
Step 2:
- Open up Activesync in PC
- Go "File" -> "Connection Settings"
- Enable "Allow connection settings to one of the following:"
- Select same COM port as enabled in Step 1
Step 3:
- ON PPC, go "Start" -> "Settings" -> "Connections" -> "Bluetooth" -> "Devices"
- Select "New Partnership"
- Your PPC will start scanning for new devices...
Step 4
- On your PC a window will pop up asking you to input a PIN
- I find I have to click the BT icon in my PC taskbar to make the window appear, but that's just me
- Choose any 4-digit combination
Step 5
- On your PPC, you will then get a request to enter the PIN you used for the PC
- Once entered, the "Partnership Settings" window opens on your PPC
- It displays "Activesync" selected
- Choose "Save" (bottom right) and you're done!
To initiate a BT Activesync:
- On PPC, go to "Activesync" -> "Menu" -> "Connect via Bluetooth"
BT works at about 1Mb/sec, as opposed to USB at 11Mb/sec, so you lose on speed, but I haven't really noticed much difference, myself.
Also, I don't have BT Activesync set up at the mo, and haven't set it up in a while, so may have missed a thing or two - but with this guide and a little common sense (and Google) you should be right.

Many thanks for all your help. I managed it few days back. It was near enough the same procedure.
Anyway thanx for all your help.
Currently I am working on VPN and Terminal Service Client. I can do everything inside my local area network, but when I am using WiFi hotspot, Dial Up and GPRS I cannot connect to my work network. There is allot about it in this forum but very little seems to work.
Callyou.

nice one
Good, clear instructions. For some reason I couldn't get the activesync service available on the BT connection, but followed the above and it appeared.
Many thanks. This has solved my USB connection issue after a reflash...

Re: Setup Instructions
huisie said:
Step 5
- On your PPC, you will then get a request to enter the PIN you used for the PC
- Once entered, the "Partnership Settings" window opens on your PPC
- It displays "Activesync" selected
- Choose "Save" (bottom right) and you're done!
Click to expand...
Click to collapse
I'd love to be able to sync via bluetooth, but activesync doesn't appear as an option. Only Hands free and dial up networking.
Have i missed something? Why is this such a complicated thing to achieve? It's ridiculous!!!
Thanks, Ash

I have different steps done but it's quite stable and high repeatability.
1: PC site, enable bluetooth and check "discoverable".
2: PPC site, open ActiveSync and click "Connect via bluetooth", if it's the first time to establish the connection, PPC will ask "there is no available Activesync port defined, would you like to define..." something like that.
3: Choose "Yes" of course, the the common bluetooth setting "partner" tab will appear, click "new devices".
4: Once found the PC, PC site will show the message to complete the pairing process.
5: Once paired, PC site will have another message showing that PPC is goting to connect through the Activesync port, then click on the pop-up message at the right-bottom corner, then choose "always allow the connection" in the newer pop-up menu.
6: Wait for PPC site to finish(taking quite long time like freeze), then there are few ports available, then check the "ActiveSyne" and complete the setup. If there is only "Serial" available instead of "ActiveSync", click "Refresh" button and repeat the step 5~6.
BTW. My PC is WinXP Professional SP2, unbranded BT sticker with Widcomm 1.4.2 Driver. PPC is Orange UK 1.30.90 WWE Version.

is this procedure the same with sharing the pc's internet connection via bluetooth to the xda exec?

Re: Setup Instructions
ashleyc_uk said:
huisie said:
Step 5
- On your PPC, you will then get a request to enter the PIN you used for the PC
- Once entered, the "Partnership Settings" window opens on your PPC
- It displays "Activesync" selected
- Choose "Save" (bottom right) and you're done!
Click to expand...
Click to collapse
I'd love to be able to sync via bluetooth, but activesync doesn't appear as an option. Only Hands free and dial up networking.
Have i missed something? Why is this such a complicated thing to achieve? It's ridiculous!!!
Thanks, Ash
Click to expand...
Click to collapse
when i first got my BT device for pc, i had this problem, i realised i wasnt on AS 4.1, 4.0 does not support bluetooth connection

Pls follow these below.Success is guranteed on XP with SP2
1) delete all the previous Standard Bluetooth Modems, if any, on yr PC from control pannel
2)Now Right click on the BT icon and select settings.After that select com ports and select Add New Com Port.Select for Incoming Com Port and make a note of that COm port number.
3) Now Right Click on Active Sync Incon, select connection settings,select serial port option and choose that same port which u hv just created.
4) Now Turn on the BT on yr device, and do the ususal procedure, you will get Active Sync option in the services when paitring.Complete the procedure of pairing and in activesync select connect via BT..and u are connected...
I hope this will help

Bluetooth? Help

Hello,
On my I-Mate JAM I only seem to have one Bluetooth port available? Is this correct (see attached shots)?
Incidentally, I can't seem to get ActiveSync to work over BT anymore - I'm wondering whether it's related to this or not? ActiveSync with BT worked at first but ActiveSync will only work over USB now. :?
Any help would be appreciated. Thanks in advance!

you should define the com port on you Pc on local services under advaced configuraions on your bluetooth. Then use the sma port on your I-Mate

nasquack said:
you should define the com port on you Pc on local services under advaced configuraions on your bluetooth. Then use the sma port on your I-Mate
Click to expand...
Click to collapse
SMA port?

I've just tried the following:-
* Setup an incoming port on my PC
* In ActiveSync connection settings, selected that port as the serial cable port.
* Created a partnership using my I-Mate to find the PC.
I just keep getting the message below, even though it's setup on my PC. :?
Even if I try deleting the partnership and recreating it after this message I have no luck. :x
What could be wrong? Cheers!

Try this:
I forgot where I found it, but I make a copy on my pc.
To the author, forgive me to post here without your permission, but my intention is to help another.
-----
1)On your PC go to the Control Panel and select "Bluetooth". In the "Options" tab, make sure all the ticks are on. You'll now see a little bluetooth icon on your system tray. Makes it easier to access in the future. Your PC should also be ready to be found as long as you ticked the fist box in the step above.
2)On your Jam, Go to Start, Settings, System (Tab), Bluetooth Settings. On the screen that comes up you ONLY want to hit start. Leave the incoming and outgoing checkboxes OFF!!!
3)You will now be taken to the partnership screen, where you just follow the instructions to add your PC. Follow through until you hit finish. Close everything down until you're back at the today screen.
4)Back to your PC, double click on the Bluetooth icon in your system tray. Go to "Com Ports" (Tab) and click "Add". Choose incoming. A You'll see an incoming port added to the list (probably be the only item there). It should look like "COM X Incoming"
Remember what number is after COM. Close all windows, making sure you hit OK or Apply where you have to.
5)Open Active Sync on your PC. Hit File, Connection Settings. Enable the first tick, and select the COM port you had to remember in the previous step. Hit OK
6)Open Active Sync on your Jam. Choose Tools, Connect Via Bluetooth.
-----
I hope above help!
Regards,
Arto.

Thanks, Artosoft. That's got me so far. The device gets past the "User Authenticated" stage with ActiveSync opening on the PC, but the sync doesn't actually occur, it disconnects at that stage.
Any ideas? Thanks again.

Timewarp said:
Thanks, Artosoft. That's got me so far. The device gets past the "User Authenticated" stage with ActiveSync opening on the PC, but the sync doesn't actually occur, it disconnects at that stage.
Any ideas? Thanks again.
Click to expand...
Click to collapse
Try soft reset your ppc maybe...?
Regards,
Arto.

Autosync with bluetooth

Hi, I've enabled an ActiveSync connection with my Trinity and my computer via bluetooth..
What I really want though is to have it connect automatically once I'm within range and everything is on, how would I do this?
Thanks for any help!

Hi, How did you manage to sync via Bluetooth.
Thanks

Haven't done this yet, I need to buy a dongle... but according to the info I've read you need to setup a pan service that is the equivilent of a wifi ad hoc connection...

smalley83 said:
Hi, How did you manage to sync via Bluetooth.
Thanks
Click to expand...
Click to collapse
Search the forums.
PAN service...I'll give it a go..

Question for El_Mariachi
So, you have your PPC rigged up to sync through bluetooth each time you put it in the cradle? That's my goal, but I'm having some trouble you might be able to help with.
Here's my situation:
- PC and PPC are paired
- Sync is possible through bluetooth manually
- In the Activesync program on the PPC I go to Menu>Connections>
The "Synchronize all PCs using this connection:" box is ticked
However, the drop down list of options only contains "`USB" and nothing else
If it isn't too much trouble, could you check your registry here:
HKCU>ControlPanel>Comm
And please list all the values under that Key?
I really appreciate it.

Apparently you have to sync manually there is no other way. I'm not sure how to check the registry but let me know and I'll be happy to post the values
In terms of syncing...
Pair your PPC with your PC
Enable an incoming COM Port from your PC via bluetooth
In AS on your PC, allow connections through that COM Port
On your PPC, in AS, select connect via Bluetooth, select your PC, ActiveSync should appear and check the box.
Then connect via bluetooth again and it should work!

Exporting regsitry keys
If you have a registry editor installed, it should be easy. If you don't have a registry editor installed, and you don't really want to install one I will understand. On the other hand, if you don't mind then a popular freeware is fdcsoft's task manager http://forum.xda-developers.com/attachment.php?attachmentid=32913&d=1168267333
Once installed, open the program and find the regedit tab. Open HKEYCurrentUser>Comm>Rasbook (see Rasbook location attachment for a pic) and look and see if there isn't a key called Bluetooth, or perhaps `Bluetooth. If there is, then tap and hold that key and select Export. (See Bluetooth Export attachment for another pic) If you zip and attach that file then I can download it and see if it works on my PPC.
Again, if this is too much hassle then it's cool, but it might really help me out. Thanks.
John

Magician connected to the Internet through USB. How to share it through Bluetooth?

Hello, oh wise ones.
The deal is:
I have my pretty Magician connected to the internet through USB on my desktop.
All is fine.
Now, i'd like to connect my laptop via Bluetooth to my Magician and use it to connect to the Web.
Is this even possible? This would be nothing short of legendary and would be told in stories for future generations.
Thanks.

Come on... Someone must know something....
60 views and no replies?

Connect your ActiveSynce through Bluetooth
If you want to connect your ActiveSynce through Bluetooth do as follow:
In your PC:
1.First of all make sure your Bluetooth Program "Bluesolei" or "Windows Bluetooth" use "COM6" as Incoming Port , if not change it to "COM6"
2.Open Microsoft ActiveSynce go to: File > Connections Settings
3.Check “Allow connections to one of the following”, and select “COM6” in the list, click OK.
In your Pocket PC:
1.Go to Settings > Connections > Beam: Check “Receive all incoming beams”
2.Go to Programs > ActiveSynce : Click on “Menu” Choose “connect via Bluetooth”
3.if asked “cannot find an existing Bluetooth partnership” click “YES”
4.In “Mode” turn your Bluetooth ON and VISIBLE
5.In “Devices” click on “Add”,
6.Select your computer form list and click “Next”.
7.Type your Passcode, click “Next”.
8.A message will appear in your PC screen and ask you for passcode, type the passcode you typed on your Pocket PC click OK, and if asked check the “Always allow this device to access this service” and click “Yes”.
9.Back to your Pocket PC a message is displayed that your Pocket PC has connected with your computer, click “Done”, and click “OK”.
10.in ActiveSynce click Menu Choose “connect via Bluetooth”.

This is not really what I wanted, but thanks.

that is what you want, make sure the share internet box in activesync is enable and then you can use internet on your magician through your laptop.

Instal softick ppp it can create a internet connection for pda/palm/mobile phone via bluetooth, usb...

well, I know what you are talking about because I use it.
you mean to use your Magicain as a router IF you are using cotulla's rom
then it's possible all you have to is to look for the short cut in the programmes
"INTERNET SHARING" and there are two ways there either bluetooth or usb
if you are using 2OO3 se I can't remember what it looks like cuz I'm using WM6.1 of cotulla