Flashed the ROm up fine to 4.01.16. But the Phone won't start up. Dumb Exclamation mark next to signal strength thingy.
Since then it's been Flash-city. I've been back and forth between 2002 & 2003 of various flavours. Most of the time the phone won't talk to the PC anymore either and I have to flash through SD.
What's going on ? I just want my buggy 4.00.05 back right now :-((
marcuskeeler said:
Flashed the ROm up fine to 4.01.16. But the Phone won't start up. Dumb Exclamation mark next to signal strength thingy.
Since then it's been Flash-city. I've been back and forth between 2002 & 2003 of various flavours. Most of the time the phone won't talk to the PC anymore either and I have to flash through SD.
What's going on ? I just want my buggy 4.00.05 back right now :-((
Click to expand...
Click to collapse
First procedure to do is there's a label on the back of your unit saying PW10A1 or PW10B1 well the first is for 900/1800 and the second for 900/1900 .
Goto the bootloader and check if it's still GSM OK, if it does then don't worry you could make it back to business bcz you might flashed your RSU part with the wrong version, or you setted the Gsm on the wrong freequency to fix the wrong setup :
1- Turn off ur device
2- press on the power buttom + the hard reset buttom
3- you should see (GSM OK)
4- press on the callendar buttom
5- select the frequency 900/1800 or 900/1900 depending on your device
6- press on hard reset it again
PS: this will erase all your data from the ppc.
If it didn't work out with you then it's possible now that you flashed your ppc with the wrong RSU version depending on the back label.
This link could help you http://forum.xda-developers.com/viewtopic.php?t=9833&highlight=
If your device is a PW10A1 Flash it with RSU 3.25.00 Ver. If it is PW10B1 then flash it with RSU 6.25.02 Ver.
Good luck to you now.
yes!!
i am verry happy
a few days ago i have upgraded ppc 2002 to ppc2003 andsuddenly i also had radio rom version 4.21.00 and there was no way that i could get the gsm radio part working or i couldn't even downgrade to radio version 4.16 orso
until i saw this message with the verry good tip from ramram.
now it is working verry fine here with radio rom 4.21.00
thanks for that !
Related
Hello There,
I've spend my free Sunday on flashing my ROM :roll:
I wanted to warn about a "bug" in the t-mobile 4.01.16 ROM with o2 radio 4.21. Here’s what happened:
I've upgraded from AT&T a.30.09 ROM with o2 Radio 4.08 to t-mobile 4.01.16 ROM with o2 radio 4.21.
- 1st I've installed the t-mobile ROM (SD Flash method Note: ALWAYS DO
THIS!)
- 2nd I've turned off my phone and installed o2 radio 4.21 (through
programB)
Problem:
Every thing went well and there were no errors at all! But:
When I tried to start my phone again there was NO SERVICE possible?!
- I've tried to reset my GSM Module by going to the Wallaby bootloader
V 5.14 and pressed the Calendar hardware button. This wouldn’t work.
- I've Flashed the ROM back to the original ppc 2002 ROM (Not the Radio
stack) to get my phone software back (what was lost or unable to start?!)
- Still the phone says no service possible!
- I've Downloaded the T-Mobile Radio stack 6.24.00 and installed it (by
Copying the RSUpdate.exe and files in the windows directory and run it
from the device windows directory).
- After doing this I had a white screen Hang . Luckily after a soft reset it
got back to the radiostack upgrade screen :lol:.
- But Still No Luck so far.
- I've reset my GSM Module again by going to the Wallaby
Bootloader V 5.14 and pressed the Calendar hardware button.
- Turned my device back on and got a simlock warning in W2003!?
- Had to Flash my ROM back again to o2 3.17.03 ROM PPC2002 to be able
to release my SIMlock again With XDAunlock. (worked :wink
- Still no Service !
- I've Installed the new o2 radio stack 4.21 back and
I had Service again!? :lol: :wink:.
- Upgraded the ROM again with T-Mobiles new 4.01.16 ROM.
- Finally it's Upgraded and smooth Working again!!! 8)
HERE IS THE CLUE!:
- I think It had to do with the o2 radio stack upgrade that came in conflict
with T-Mobiles new 4.01.16 ROM.
- So 1st upgrade radio stack in PPC 2002 OS if you have an older radio
(i.a. 4.08) stack before you do a ROM upgrade.
- WARNING: Don't use the T-Mobile band switch 900/1900 function if the
phone is working!!! I found this is also a crucial bug and causes to crash
the GSM module with the o2 4.21 radiostack!
Question: Could annyone tell me were I can find and how I can Upgrade
my Wallaby Bootloader from v5.14 to ........
Thanks and have a good one!
have upgraded my Wallaby radio stack from original to 6.25 using .EXE file. My device restarted , but nothing happen just the boot screen. is there anything I can do ??
There are only G and U letter un right corner.
I can go to the boot loader (GSM error --> failed to start)
What can i do to go to today screen and reflash an other radio stack (like 4.21) ?
Qtek 1010 - 64M - ROM 3.04 ENG (WM2003SE) -
RAdio Stack depends on the Model. Check your rear sticker. It it´s a PW10Bx-model it uses 900/1900 MHz and require a 6.xx Radio stack.
If it is a PW10Ax then you have to use a 4.xx Radio stack.
Try this:
http://wiki.xda-developers.com/index.php?pagename=Wallaby_HT_GSMError
Stefan
thks
but i can't access to the device (install the good radio stack).
the splash screen freeze (with G an du lettre in place of the version of the radio stack).
Many hard reset, many test ...
if i can go to the today screen i can flash the good radio stack.
Have you tried installing the Special Edition ROM?
Still getting no Today Screen ?
Stefan
i cant get to today screen
All is working fine now.
1 : remove the sim card from the device
2 : go to the boot loader and test the phone (failed for all)
3 : hard reset
4 : wait 20 minutes
5 : you've got the to day screen and you can reflash the RSU (do not put the .exe file in the windows/startup)
and that all for me
I can't get to today screen....
irsan_donald said:
I can't get to today screen....
Click to expand...
Click to collapse
I have the same problem with my wallaby.. It shows splash but wont continue for a long time (more than 30minutes) I try to dowgrade ROM back to original Tmobile ROM wiwt 2002windows but still wont display today screen..
so i try to uprgrade to win 2003se and after 18 minutes today screen shows up.. I am lucky man now.. my wallaby its working again THANX GOD and U BOYS I LOVE U ALL !!!!
http://forum.xda-developers.com/viewtopic.php?p=138920#138920
ive just done it
HOPE THIS HELPS YOU.
Hi,
I want to try one of pug's rom upgrades, because the Dutch Qtek (representing) company sucks extremely hard and offers barely any support at all to its users I installed their (very old) upgrade, and it ****ed everything up :roll:
Anyway, Im very anxious if it comes to rom upgrades, especially unofficial "found somewhere on the net" upgrades (nofi). So I want to back up my old rom version and be able to put it back, in case pugs update doesnt work out. I found the following url on this forum:
http://en.pdamobiz.com/en/forum/forum_posts.asp?TID=370
But when I try that, all I can get into is safe mode.. I never saw any 'boot loader', even though I tried like 10 times :shock: I take the following steps:
- Press and hold the power and record button for a few seconds
- Let go of those buttons
- Stick the stylus into the little hole to reboot my device
Yet, I dont get into a boot loader.. Can anyone help me with this?
Also, the readme of pugs upgrade says:
The update will fail, do nothing to the device but run MaUpgradeUt_noID.exe again.
Click to expand...
Click to collapse
Why does it fail the first time? It kinda scares me that it does.. And can I put his radio_*.* in my own update? Because thats actually the part that I want upgraded, the bluetooth functionality..
Thanks in advance for any replies
Oops, I forgot my device information :
Qtek 2020i
ROM 1.11.00 WWE
Radio 1.02.00
ExtROM: 1.11.112 WWE
hey not Cam button
dude he's saying to press (Reset SW and Power SW and Action button) the circular cutton between the yes and no buttons press these switches in same time and voila BootLoader Mode...
I too am interested in finding out how to backup my current Alpine rom to my PC (preferably direct to PC, not via SD) and then re-installing it if necessary at a later date.
Does anyone have a complete guide (not a pdamobiz guide, unless it is written in English and not engrish.)
I've used the XDATools OSImageTool to take a backup. If I were to install the following ROM: ftp://xda:[email protected]_Radio-1.04_O2stuffstripped_Camera_Fixed.rar would I be able to return my PDA to its current state by simply using the OSImageTool to restore my backed up ROM?
Hi...
I upgraded my qtek 9100 from OS version 1.6.7.1 to cingular 1.8.11.1
The problem is that now, the phone doesn't start... the splashscreen appeears, along with... IPL 2.17
SPL 2.21
GSM 02.07.10
OS 1.8.11.1
But doesn't get out from there...
Did a do anything wrong?
PLEASE help me?
Is there any solution or is it bye bye qtek?
maybe you flashed broken or wrong rom.
start your device in bootloader mode (look in wiki how to do this) and then reflash again and if this does not work, get rom from your provider and reflash with this.
...
But my pda starts and it stays in splashscreen... is it repareble anyway?
Yes it should be fixable
Cant understand why you would want a old cingular rom (the cingular is not exactly same hardware as your phone wiza200 vc wiza100!)
You should download an aku2 rom here ftp://xda:[email protected]/Wi...digy_2170702_21707102_20710_QTEK_WWE_Ship.exe
user name xda password xda
Next get into the bootloader screen - turn device off and start with camera button pressed - should be a multicolor screen
Next attach device to pc via usb cable
Flash with above rom and all should be well
help me to break & solve this problem, maybe can also help the other members..
I tried to upgrade my XDA to WM2003SE everything goes right,
bootloader first time i still use v5.22
but when I soft reboot it freezes on the OZUP screen and
message ONLY FOR MICROSOFT bla bla bla....
i get this ROM from http://www.romkitchen.de/ ==> WM2003SE
then downgrade bootloader from v5.22 to v5.15,
using MMC (flash SD) continue to special rom 1.2,
and then cooked again using PC2002 by my own creation based from
romkitchen, what i want to ask is :
i cannot connect again via dekstop activesyn if i want to change
my ROM because my cradle cannot detect my charger?? but if i charge
directly, its work. What is the problem?
is my cradle/dekstop broken at the charger socket?
so what i need to do? just change the wire or socket or
i use the step like at http://wiki.xda-developers.com/index.php?pagename=WallabyCradleMod
if i prefer use the 2nd method, is that really OK? so just used cradle/deskstop, no need
power charger again if i want to change ROM to WM2003SE, because only can use via activesync?
after i change bootloader to v5.15, keep trying to change but only can via Flash SD Card,
i change to WM 2003 final, still same problem....after finish, only screen cannot enter the
menu or else, only boot screen until i am waiting for 15 minutes??? then change again to
WM2003 but using from http://www.romkitchen.de/tools, still same again....boot screen again...
haiyaaaa.....what happen?? i dont know, tired, always overtime to do this,hehehhee...
all my friends, help me...need your advice ^_^V
*now, i still used ROM from PC 2002,cooked again using PC2002 by my own creation based from romkitchen.
bootloader v5.15
Microsoft Pocket PC --> PC2002
Version 3.0.12039 (Build 11178)
ROM version : 3.17.03 ENG
ROM date : 05/15/03
Radio version : 6.24.00
Protocol version : 324e4
Model No.: PW10A1
I can not really help you, but i was also in the same situation, that i have had a device, that doesn´t work with any other ROM than PPC2002
Flashed several WM2003 ans the WM2003SE but non of them worked.
So i rest at PPC2002
Stefan
ow ow...
auch.. ok, thanks for the comment, i give-up,hehehe..but only for now,
take a rest first but i dont know for t'mrow, actually from 10 flashed,
i got 1 success, can got WM2003SE but with almost empty battery,
i know the inside and already set all, including i notice bluetooth icon,hehehe..
but how? i wonder that my sx56 with fake bluetooth, only icon
but after i charge my sx56 then i soft reset, its gone, back again with only boot-screen, after that, i can't find again WM2003SE ROM only lock with boot-screen, and ONLY FOR MICROSOFT..blablabla...
and about for my cradle/dekstop? how is it? can u give me solution to fixed it??
btw,thanks for helping, tips & trick hehehe...
i will keep trying to find/solved this problem by my own way ^_^V
modify my cradle/dekstop success
its working, i try to modify my cradle/dekstop with that steps (look at the top this thread), and it's work...actually not me who did it, but my friend,hehehehe....i ask his help and he agrre to doit, but all the risk is still at me, now i can charge and also syncronized to my notebook