Related
hey people....
i was just upgradeing the radio stack to v.4.21 beacuse mine was v.4.20 and as i was installing it on the xda, it said "Upgrade failes" and crashed. I then tried a soft and hard reset and it just crashes again.
Can some one PLEASE help me...
Thank you so much
jay
Apart from a sof and hard reset, what else have you tried to resolve the problem?
nothing
i dont know how.....i have had the XDA for 1 day
any advice i would be VERY greatfull....
even if u think it may not work.
thank you so much
jay
well looks like you may well have a dead one day old xda on your hands there jay
no dont say that....
its not dead.....its just sleeping (hopefully)
please help any body...*does a jig to get people to help* lol
jay
THE PROPHETOR! said:
"it said "Upgrade fails" and crashed. I then tried a soft and hard reset and it just crashes again."
Can some one PLEASE help me...
Click to expand...
Click to collapse
Crashed!!!!
What is being displayed on the screen?
Are you able to use your XDA at all?
Will it still connect to your PC via ActiveSync?
the answer to all those questions is no....
no activesync
no using the xda
the only thing that is being displayed is the startup o2 sign and in the left hand bottom corner it says
g
r
s 31.85834 (or some number)
and then it goes to a blank white page.....
it keeps swapping back and forth from these two pages
thanks
jay
Are you able to get into the bootloader?
press and hold to on/off button while soft-resetting.
Do you have a SD card reader?
Also, where did you get the xda from, just incase!?!
im gonna try the bootloader thing....but what do i do if it works (im waiting for it to charge up abit before i do that) although i dont think it is charging
i dont have a sd card yet....
o2 online....i have insurance, i think (hope) they will change it....but im going away tommorow for 4 weeks....and im stuck without a phone...so i wanted to know if there was a way that i could reinstall it again...
thanks again york for your help
jay
hey yeah i can get to bootloader
wallaby bootloader v5.22
what do i do?
it siad there is a gsm erorr?
thanks
jay
Right, well it's a start, unfortunatly without an SD card reader there is nothing that I know that will fix this problem, as you cannot use Activesync without the os loading.
I've had a quick look around the forums but all related articles on fixes suggest the need for a card reader.
When you did the upgrade, did you remember to remove the power supply first?.
It seems that leaving the power supply attached while upgrading the radio causes an internal configuration error.
If no one else here can help with your problem, you will have to send it back to O2, they will replace it for new, however, if they do kick up a fuss, remind them of the Sale of Goods Act (Amendment) 2003.
Sorry, that's about as much as I can do mate. Good luck, and don't be but off the xda by this problem, I got mine of ebay and broke the screen within a week, had to fork out another £130 for a new screen, but I'm very glad I did.
ok thanks york......
i will give o2 a call.....
thanks
jay
THE PROPHETOR! said:
hey yeah i can get to bootloader
wallaby bootloader v5.22
what do i do?
it siad there is a gsm erorr?
thanks
jay
Click to expand...
Click to collapse
Great now press the Calender button, that should put you in the GSM
bootloader mode. From there run some of the options ect.., try changing your band to 900 and see if that helps also try turning the radio off as that might let your XDA bootup.
hi....i tried that and it kep saying....
gsm turn ON fail!!
any more ideas?
thanks
Hi all,
I have a 8125 (Wizard) that I bought used with a broken LCD - I replaced the LCD with hopes of having a functional phone, but I'm not quite there...
It WAS working as a nice little PDA for a while, with the newest Cingular ROM (2.25 I believe). HOwever, I received absolutely NO signal on the radio - the little animation just constantly went like it was forever searching.
So, in my newfound expertise in flashing HTC devices, I decided to flash this to a different ROM. First, I tried the one they call Button 1.05. No bones - it'd drop connection before even going to the tri-color.
Next, I tried the SlimEdition 2.2b of WM6 (I wanted to put WM6 on it anyway, and with this old of a phone, I'm keeping away from excessive gadgets). Same deal as the Button 1.05.
On to the Faria WM6 I found in another forum. This one didn't even find my phone.
Before suggesting I try doing the flashes more than 1 time, I did.. I've been trying to flash this thing for over a month...
Additionally (and probably part of the problem), when I connect the phone to my mini-USB (no, not HTC OEM) it establishes connection about 1/3 of the time....the rest of the time I get a "USB Device not Recognized" warning from XP - I then disconnect it and reconnect it until AS4.5 sees it.
Most recently, I tried putting the Button 1.05 on again, and actually made progress...sorta...
Once I got the RUU running, I actually got it to progress to 2% before the RUU declared a connection failure. Stuck in the RUU screen, I tried all the ROM's I have on this thing, and none get past 2%.
So, NOW, I have an 8125 that's stuck in the RUU screen. I dont know what I can try next, or what might be the problem - however, if anyone knows or has spare parts they're willing to donate to science (I can afford to pay the shipping - that's about it) then I would be most grateful. My initial thoughts are bad USB port or mainboard, but I haven't a clue where to get them.
Alternatively, if I dont hear from anyone soon with good news, I will be offereing for sale 1 hardly used LCD/Digitizer combo for what I paid for it. (approx $45 USD).
Summary (long post, eh?):
1> Can I get out of the tri-color RUU screen, or did it getting to 2% and then dying effectively brick this phone?
2> Anyone have suggestions on what to replace to prevent AS4.5 (or even Windows) from misdetecting the phone when connected via USB?
3> Anyone have parts for above-mentioned repairs/replacements? I'd be most grateful....
TIA!
- M
Follow up - next day (yes, next day)....
Apparently, the Forum Gods were watching over me as I spewed about my flashing issues......
I tried flashing it one more time, using the Slim v2 WM6 ROM....wouldn't ya know, the sunnovabatch worked....
Dunno why or what I did differently, but I dont want anyone pounding their heads trying to find an answer for this....
(I'll still take any donor phones, though...this one is 'better', but still not 'great')
Thanks for lookin!
- M
thats good to hear. say, how hard you think it would be to replace a usb port connector? mine is broken
collwatt said:
thats good to hear. say, how hard you think it would be to replace a usb port connector? mine is broken
Click to expand...
Click to collapse
Well, I've never replaced one myself, but it looks like it's just a few solder joints....
Can anyone confirm this? I dont want to mislead you by saying it's easy, in case it just looks easy, and really isn't.....
Also, I think I saw a thread elsewhere where someone had a bunch of the USB connectors that (s)he was selling....search here first - I'm pretty sure it'll be a better deal than you'll find on fleabay....
GL!!!
- M
Hello,
I am new on this forum (speaking of posting) i've been reading alot on this forum.
unfortunately, not enough..
Yesterday i got a htc hd2 from my dad because he couldn't work with it.
the only problem was that if he was calling the other person heard him like being in a bathroom or so,
I tought maybe it was because of the software ( i have put android on it about 2-3 month's ago maybe a bad version)
So i decided to put another version on it..
Well everything worked fine for me , set everything up but internet wouldn't open,
So i decided to reboot the phone, but that's where it went wrong, the whole phone died , not responding on powerbutton or anything else,
So as far as i know it's bricked.
the only wat to unbrick it (i know) is by using a jtag riff box, i don't know anyone in my country (the netherlands) who have it.
Now i don't know what to do.
sell the phone as broken for parts like display etc.
of shall i buy a box myself (107 euro without connector)
What are the points of concidering besides of the money,
is it enough to buy the box + connector and then download the software, or do i need to buy licenses too?
if not it's very attracting, an maybe i can even help other people who have bricked his/hers phone
If anybody have a trustable site for me to buy one in europe also please let me know.
madco said:
Hello,
I am new on this forum (speaking of posting) i've been reading alot on this forum.
unfortunately, not enough..
Yesterday i got a htc hd2 from my dad because he couldn't work with it.
the only problem was that if he was calling the other person heard him like being in a bathroom or so,
I tought maybe it was because of the software ( i have put android on it about 2-3 month's ago maybe a bad version)
So i decided to put another version on it..
Well everything worked fine for me , set everything up but internet wouldn't open,
So i decided to reboot the phone, but that's where it went wrong, the whole phone died , not responding on powerbutton or anything else,
So as far as i know it's bricked.
the only wat to unbrick it (i know) is by using a jtag riff box, i don't know anyone in my country (the netherlands) who have it.
Now i don't know what to do.
sell the phone as broken for parts like display etc.
of shall i buy a box myself (107 euro without connector)
What are the points of concidering besides of the money,
is it enough to buy the box + connector and then download the software, or do i need to buy licenses too?
if not it's very attracting, an maybe i can even help other people who have bricked his/hers phone
If anybody have a trustable site for me to buy one in europe also please let me know.
Click to expand...
Click to collapse
Hi,
Can you get into bootloader?
Power on and hold volume button down.
Can you get into tri-color screen?
malybru said:
Hi,
Can you get into bootloader?
Power on and hold volume button down.
Can you get into tri-color screen?
Click to expand...
Click to collapse
No, unfortunatly even that is not working,
The whole phone is not responding on anything.
i can push my powerbutton, but even no light goes on , and nothing appears on the display.
That's why i guess it's bricked (also because i am using a t-mobile sim even it is a HD2 which is sold by a hi (kpn nl) provider)
Nobody has an idea what's best to do? or does know someone in the netherlands with a box?
It would be easier to help you if you would have said what you've done to the phone.
I find it very hard to brick this phone if HSPL was on it, as there is nothing the Malgdr or CWM can do to ruin it (to my knowledge).
Try these two things:
1) Is the battery charged - sometimes that might be the problem
2) Connect the phone to your PC, and see if it recognizes it.
Let us know how it went.
madco said:
Nobody has an idea what's best to do? or does know someone in the netherlands with a box?
Click to expand...
Click to collapse
Sorry, don't have a box.
But, Check the battery pins, commonly, one of these are bent, and that's why it won't boot-up.
Does it use Magldr? or cLK? (Eg, when you booted, did you see a black screen with white text, and gogogo as the last line?(magldr) or did it just boot as android(cLK).
If cLK, put your phone in charger and see if the red light turns on.
Hope this helps a bit,
Eelke
I had mine jtag here in teh US I am not sure the cost involved but he can fix it for you if you care to have it shipped here. The person that did it is a member of xda and gave me fantastic service I can send you his website if that interests you. Just PM me if you wish.
Good Luck
Riff?
Never heard of one. Will a repair shop not have one?
Check the battery compartment and see if any pins connecting the battery to the phone are bent in a wrong direction. If so, correct this, put battery back in, connect phone to charger / USB and try turning it on.
Okay, back since a while.
Last week i found my HD2 again, (still not working.. )
So i thought about going to fix it.
I found out it isn't the battery though.. i tried another one in my phone, still dead,
My battery in another phone.. and that works.
So now i want to buy an riff box for sure, i fond some at the internet but i don't know if i can trust those sites...
First one is : http://gsmserver.com/shop/gsm/riff_box_jtag.php
Second one is: http://www.multi-com.pl/
third one is:http://www.ipmart.com/main/
Has anyone of yours some experience with one of these three shops?
1st one would be my first choice because they have all i want to order,
2nd one is the most expensive,
3th, miss something i want, but i can make it on by my own.
So can you please help me figure this out?
Best recommendation from me and your hd2, if you want to learn, is http://www.segger.com/j-link-edu.html (it no need credits, +++ another $, it's tootaly open for all you want with your phone) + great revskills software !!! I am happy user with all that!!! It's not automated process like in riff box but after working with it it's very great and easy!
http://forum.xda-developers.com/showthread.php?t=1307644
unlucky bud
Indeed it's pretty sh*tty.
Thanks for your link munjeni, but the riff box attracts me more, just because of the easyness.
Nobody some experiences with these sites please?
madco said:
Indeed it's pretty sh*tty.
Thanks for your link munjeni, but the riff box attracts me more, just because of the easyness.
Nobody some experiences with these sites please?
Click to expand...
Click to collapse
As long as you pay by PayPal, you should be covered. I'll be interested in knowing how things went...
Hi. I have a problem with my HD2 and I didn't find a solution how to fix it for over a month and I don't think I will find it. My problem explained (HERE) So now I want to Brick / Brake my phone so that I can send it to my insurance and they will not able to tell that I had Android on it, as now I can't install WM and I can't rid of MAGLDR. So what will be the best way to Brick / Break my phone so what whey will not be able to turn my phone on or fix it and find out that it’s been hacked as then I will not get a new one or they will not fix it. Waiting for advices
Sw1pe said:
Hi. I have a problem with my HD2 and I didn't find a solution how to fix it for over a month and I don't think I will find it. My problem explained (HERE) So now I want to Brick / Brake my phone so that I can send it to my insurance and they will not able to tell that I had Android on it, as now I can't install WM and I can't rid of MAGLDR. So what will be the best way to Brick / Break my phone so what whey will not be able to turn my phone on or fix it and find out that it’s been hacked as then I will not get a new one or they will not fix it. Waiting for advices
Click to expand...
Click to collapse
I see a lot of solutions, but nobody seems to have told you to boot up your phone using volume down, which gets you directly into the bootloader, from where you can flash the Winmo 6.5 ROM.
Did you try that?
Otherwise there are numerous ways of trashing it i guess... mess around with electrical wiring and make sure the mainboard has a power spike or something... then you're sure nobody will be able to do something with it
Of course I tried it. The problem is that for some reason I can't get into bootloader, and I tried to do that 100 times with all different methods with no luck. I only can get into MAGLDR. I wrote all this in my first message in that threat
Well, from what i can understand after looking at your original post, you cannot enter the tri-color bootloader? Well, have you tried a hard reset? And, when you mentioned liquid entered your phone, you should also check the water indicator stickers on your phone and battery to see if they are pick or red. Else, they will not bother replacing or repairing it. Have you also tried resetting Android from MAGLDR? Back to your request, if you cannot enter the bootloader and unable to flash anything, the easiest ways to brick(any maybe recover) your phone are all void. The best way to physically damage your phone might be to short circuit it. Alternatively, if you just do not want them to know that you have flashed MAGLDR, you should damage the ribbon cable for the LCD. You have to unscrew the phone for this,but do gently remove the warranty and water indicator stickers before this. Please do explore all avenues like a hard reset and Android reset
i just got off the phone with htc and thay still fix the phone even if it has android on it thay will just replace the main bord because thay dont know how to fix it. but i have bricked my phone alredy and it wont turn on at all due to flashing a wrong rom on it that was ment for a diffrent country my phone is htc hd2 tmoble us. anyway you may just want to fix it your self and use the riff jtag box
watch this to see how to dissesible the device fix it and reasimble!
http://www.youtube.com/watch?v=eoiuM9epp2o
then watch how much easyer this guy repairs it using the non soldering method!
http://www.youtube.com/watch?v=XroEPU4qyuM
first you need riff box and the other thag to or the non soldering method
i dont know the name for it im trying to find out!
hears teh link for riff box
http://www.jtagbox.com/tag/htc-unbrick/
hears the link for the other thang
http://www.multi-com.pl/index.php/en_US,details,id_pr,6503,menu_mode,categories.html
but not sure!!! im hopeing someone could conferm that or give us better links to this stuff!
maby from a diffrent sorce or cheper even!
so far i found the riff box for 150usd
but i dont know about the other thang! hopeing someone can help us with this stuff!
the advantages are if you brick it agin you can fix it agin and you can bebrave enuf to test new roms its expencive but its a very populer device and im shore more new roms will be relesed you may beable to help others who have bricked phones and make some cash back
i think this is the other thang he used but i need to find a site that has it in usd and in english im sort of in the same boat as you exept im not in warinty but warintys dont last forever so eventuly this thang is gona be peoples only hope!
htc charges
avrege repare 50$
lcd 120$
mainbord 170$
mainbord & lcd 285$
and thats only if you have
thay might extend your warinty if you have your resept
or
prufe of puchese
date
product id
im curently looking for someone to do a riff jtag on mine!
hope my info helps
i bricked my phone
i briked my htc hd2 phone . when i switch it on it gets stuck at the pink ribbon which does not roll at all. i tried installing a gingerbread on it and while usind the mgldr it downgraded and when i swithced it on again the loading got stuck at the pink ribbon.
baymol said:
i briked my htc hd2 phone . when i switch it on it gets stuck at the pink ribbon which does not roll at all. i tried installing a gingerbread on it and while usind the mgldr it downgraded and when i swithced it on again the loading got stuck at the pink ribbon.
Click to expand...
Click to collapse
well atleast it boots i would start from scratch if i was you if its tmoble usa htc hd2 install RUU_Leo_1_5_TMOUS_2.10.531.0_Radio_Signed_15.34.50.07U_2.08.50.08_2_Ship.exe
Sorry for a late replay, I was very busy in the past days
kawshigan said:
Well, from what i can understand after looking at your original post, you cannot enter the tri-color bootloader? Well, have you tried a hard reset? And, when you mentioned liquid entered your phone, you should also check the water indicator stickers on your phone and battery to see if they are pick or red. Else, they will not bother replacing or repairing it. Have you also tried resetting Android from MAGLDR? Back to your request, if you cannot enter the bootloader and unable to flash anything, the easiest ways to brick(any maybe recover) your phone are all void. The best way to physically damage your phone might be to short circuit it. Alternatively, if you just do not want them to know that you have flashed MAGLDR, you should damage the ribbon cable for the LCD. You have to unscrew the phone for this,but do gently remove the warranty and water indicator stickers before this. Please do explore all avenues like a hard reset and Android reset
Click to expand...
Click to collapse
Yes, I cannot enter bootloader and yes I tried hard reset (with volume up and down keys) with no luck. I checked my indicator stickers and they all look fine (white). The liquid damage was not a water damage I get a little bit of oily liquid on my phone but just a little, so very little of it could get inside my phone if any, but after that my phone just frozen on android screen and when I tried to reset it, it’s always freezes on android boot screen. And yes I tried resetting Android from MAGLDR, I even tried to install different android soft but after installation it still freezes on android boot screen.
Code:
the easiest ways to brick(any maybe recover) your phone are all void
Can you explain more about his one? And how I can do that?
I don't really want to unscrew anything because if I going to do something wrong I would void my insurance and they not going to change it at all. I was thinking maybe just drop it in a big cup of water and hold it for like 30sec - 1min. I think my insurance will cover water damage and I think whey not even going to bother to fix it. What do you think?
jackrabbit72380 said:
i just got off the phone with htc and thay still fix the phone even if it has android on it thay will just replace the main bord because thay dont know how to fix it. but i have bricked my phone alredy and it wont turn on at all due to flashing a wrong rom on it that was ment for a diffrent country my phone is htc hd2 tmoble us. anyway you may just want to fix it your self and use the riff jtag box
watch this to see how to dissesible the device fix it and reasimble!
http://www.youtube.com/watch?v=eoiuM9epp2o
then watch how much easyer this guy repairs it using the non soldering method!
http://www.youtube.com/watch?v=XroEPU4qyuM
first you need riff box and the other thag to or the non soldering method
i dont know the name for it im trying to find out!
hears teh link for riff box
http://www.jtagbox.com/tag/htc-unbrick/
hears the link for the other thang
http://www.multi-com.pl/index.php/en_US,details,id_pr,6503,menu_mode,categories.html
but not sure!!! im hopeing someone could conferm that or give us better links to this stuff!
maby from a diffrent sorce or cheper even!
so far i found the riff box for 150usd
but i dont know about the other thang! hopeing someone can help us with this stuff!
the advantages are if you brick it agin you can fix it agin and you can bebrave enuf to test new roms its expencive but its a very populer device and im shore more new roms will be relesed you may beable to help others who have bricked phones and make some cash back
i think this is the other thang he used but i need to find a site that has it in usd and in english im sort of in the same boat as you exept im not in warinty but warintys dont last forever so eventuly this thang is gona be peoples only hope!
htc charges
avrege repare 50$
lcd 120$
mainbord 170$
mainbord & lcd 285$
and thats only if you have
thay might extend your warinty if you have your resept
or
prufe of puchese
date
product id
im curently looking for someone to do a riff jtag on mine!
hope my info helps
Click to expand...
Click to collapse
The thing is that I have insurance on it not a warranty. If I only had just a warranty I will think of fixing it by my self with jtag. But now I just need to think of how to break it so whey don't know it was hacked pay to my insurance £20 - £30 and I should get brand new HD2
bump !
High voltage electrical charge: via stun gun or similar high voltage output such as automobile ignition coil ect ... Have seen a stun gun used on a computer, killed it without any obvious signs of damage ...
Alright guys. Today I received my HD2 in the mail and I had one once before in the past. I bought this on Ebay claimed it was broken because it was stuck on the stick together screen I got it for 65$ and now I turned it on it was stuck there. I went to the bootloader it was SPL 2.08 and now I removed the battery but I can't get any response to turn on anymore. When I plug in a charger theres no orange led. I checked the back on the phone it looked like it was opened up before because the void label is all smashed but visible. Is it bricked? The seller said it would sometimes go stick together or stay black. I'm trying my best to turn it back on atleast to bootloader because I have no ****ing working USB to PC cable. and keep it like that till I get one. Any help?
Okay i just got it to turn on but I didn't get the chance to enter the bootloader just Stick Together. I have no clue if it's just random or the battery is going poop. I will try to get it to respond at least so I can enter the bootloader and find a working usb cable.
first, the not turning on when it was on a moment before - check the battery pins, they bend easily, and can sometimes crack.
there are a number of faults that can cause hanging on splashscreen, and also that can cause inability to enter bootloader, some hardware, some software.
Im assuming its a tmous, in which case hunt down the link to the tmous rom on the htc website (start at t-mobile.com, i think its still linked there)
get the latest rom and then all you can do is try to get into bootloader and try flashing.
If you get it to start turning on but cant get into bootloader with voldown, ive seen threads where disconnecting the bottom hard buttons has helped, and also threads where a faulty vol-down was to blame and shorting the pins manually was the solution.
But there's no orange led light when I plug in a charger. I've looked at topics and it has 2.10 SPL and no rom or radio it's been task29'd
samsamuel said:
first, the not turning on when it was on a moment before - check the battery pins, they bend easily, and can sometimes crack.
there are a number of faults that can cause hanging on splashscreen, and also that can cause inability to enter bootloader, some hardware, some software.
Im assuming its a tmous, in which case hunt down the link to the tmous rom on the htc website (start at t-mobile.com, i think its still linked there)
get the latest rom and then all you can do is try to get into bootloader and try flashing.
If you get it to start turning on but cant get into bootloader with voldown, ive seen threads where disconnecting the bottom hard buttons has helped, and also threads where a faulty vol-down was to blame and shorting the pins manually was the solution.
Click to expand...
Click to collapse
Nvm, I got the it to charge a little. It's been booting up everytime i turn it on now. I'm just wanting for my usb cable to work because right now it's not working on any phone i have with me other than the HD2 so it's the cable. It works fine charging but when i try to use my usb cable on my pc with ANY phone it doesn't seem to work. Gotta find one.
blahblah13233 said:
or radio
Click to expand...
Click to collapse
it does have a radio, you cant not have one. task 29 doesn't remove it. the radio it has will already be fine for running android, its not something you need worry about until you have a working phone.
Okay. For some weird reason it vibrates 7 times indicating a hardware failure. So that's it. I wasted 65$ that's awesome. Before i can even try to flash a new rom or anything. Ugh.
I got it to work on a freezer and it works till it gets slightly warm or hot.
blahblah13233 said:
I got it to work on a freezer and it works till it gets slightly warm or hot.
Click to expand...
Click to collapse
Bad motherboard, needs to be replaced.
stevedebi said:
Bad motherboard, needs to be replaced.
Click to expand...
Click to collapse
As stevedebi stated you will need a new motherboard. Unfortunately its not cheep even if you know what your doing and was able to do the labor yourself. I will say that all is not lost though because you could re-sell it on ebay and get your money back. Even in its current state it should sell for around $80-$120. Personally i would list it at $100 obo. You got it so cheep that eventhough you are unable to fix it for a low price you should still be able to get all of your money back.