Database Users

help me with my mogul!!

ok so i got a big problem my mogul is stuck at the supposed ''bootloader''.
i tried running a couple of diffrent things to try and fix it becuase i read somewhere that the phone is ''bricked'' but i dont know
my screen has red,blue,green and a white bar
in the red bar it says
TITA100
SPL-2.07.0000
CPLD-9
this has been f'd up for 4 days now,and neither htc or sprint knows whats wrong
and also my mogul wont connect via usb (but my razr will so cord and computer are both alright)
it happened while i was listening to audio manager,the sound cut out and wouldnt work so i tried to reset upon reseting i got here
i have tried to hard reset and the phone just goes back to the same spot
i have also tried renaming the ruu_signed.nbh (from the sprint official rom) to TITAIMG.nbh and it installs successfully but still goes to bootloader (even tried the ollie unlocker or whatever)
PLEASE HELP ME OUT GUYS!!!

have you tried just installing a new rom?

yes it installs successfully (when i load it from phone,not from my computer) but then it still goes straight to bootloader

wait, you were installing a rom from the storage card? and if so i would probably trying installing from an actual computer and see what happens

jbearamus said:
wait, you were installing a rom from the storage card? and if so i would probably trying installing from an actual computer and see what happens
Click to expand...
Click to collapse
did you not read my original post??
i said my mogul wont connect detect the usb for some reason,and it only did it after it went into the bootloader mode

Silly question, but have you tried pulling the battery? How about the exit bootloader program? I have never used the exitbl program, but there are instructions on how to do it around here somewhere...
TRY THIS

so i fixed the phone myself messing around with it
(no thanks to you so called ''pros'')
but still my charger/usb port wont work and my battery has 6% left lol
im gonna call htc right now and see what to do

So, care to explain what you did to "fix" it so when people search for this problem they might get an answer instead of posting a common question in a thread?

i pressed the camera camera by accident when i was pressing reset and it took me to the htc screen where its shows your radio version and rom version and everything.
it said ''no radio'',so i pulled the battery and put my memory card with the newest sprint rom (the file i used from the sprint rom was the RUU_signed.nbh,i named it to TITAMG.nbh)then i manually put the phone back into booloader by pressing power and camera key at the same time.
the rom loaded up and installed,then when it was finished i pulled the battery.
to turn the phone on i pressed the camera button,then the reset button both at the same time.then the phone loaded up and went through all the ''welcome to windows mobile'' garbage. there you go,thats exactly what i did.
but now my charger port wont work

punkrocker12201 said:
i pressed the camera camera by accident when i was pressing reset and it took me to the htc screen where its shows your radio version and rom version and everything.
it said ''no radio'',so i pulled the battery and put my memory card with the newest sprint rom (the file i used from the sprint rom was the RUU_signed.nbh,i named it to TITAMG.nbh)then i manually put the phone back into booloader by pressing power and camera key at the same time.
the rom loaded up and installed,then when it was finished i pulled the battery.
to turn the phone on i pressed the camera button,then the reset button both at the same time.then the phone loaded up and went through all the ''welcome to windows mobile'' garbage. there you go,thats exactly what i did.
but now my charger port wont work
Click to expand...
Click to collapse
I did see some threads on a different site I think about the USB port having some issues with the pins getting pushed back up into the back of the port and not making a connection any more. This kind of sounds like your problem as you said that your computer doesn't recognize the phone either. Some people were able to straighten the pins back down and use it again, some the pins broke so good luck if this is the case.

jambrose said:
I did see some threads on a different site I think about the USB port having some issues with the pins getting pushed back up into the back of the port and not making a connection any more. This kind of sounds like your problem as you said that your computer doesn't recognize the phone either. Some people were able to straighten the pins back down and use it again, some the pins broke so good luck if this is the case.
Click to expand...
Click to collapse
ya there was one pin pushed down and i actually thought at first when i looked in the charger then in the phones mini usb port. that the pin was broken off but it was just smashed down
so now i have my phone back (besides this cheap a$$ lg)

punkrocker12201 said:
ya there was one pin pushed down and i actually thought at first when i looked in the charger then in the phones mini usb port. that the pin was broken off but it was just smashed down
so now i have my phone back (besides this cheap a$$ lg)
Click to expand...
Click to collapse
So maybe you owe us "pros" an apology
punkrocker12201 said:
so i fixed the phone myself messing around with it
(no thanks to you so called ''pros'')
Click to expand...
Click to collapse

SORRY
lol

HD2 not booting...

Guys, I need a bit of advice please.
After an accidentally botched radio install (phone fell and disconnected from USB whilst flashing), my HD2 won't boot. It gets stuck on the multi-coloured 'initial screen' (for want of a better expression) with 'SPL-1.42.HPSL XE CotullaHSPL' on it.
I'm looking to do one of two things, either rescue it, or, PREFERABLY kill it completely so that the device does not even boot to that screen. I know that sounds like a strange preference, but that would be ideal for me. Have you got any suggestions at all guys?

If you want to send it back and get a new one, then you definetly have to remove HSPL. Get HSPL2 and try to flash 1.42.0000. If it works, your problem is solved! Simply take it to customer service, complain about it not booting all of a sudden and you`ll either get a new one or get yours fixed.
However... if you fail removing HSPL and have no other option available, try and microwave it, literally. Put it in a microwave oven until it refuses to boot, then take it back to customer service complaining about how it suddely stopped working.
Best of luck!

Quite LITERALLY put it in the microwave and turn the microwave on?? For how long? Won't it just 'melt' the innerds, or blow up?

Yep. I did this to mine in 10 second intervals. The first time nothing happened, it just got hot. The second time, the vibrations stopped working. The third time nothing. The fourth time the screen started to fail (but STILL booted into the bootloader). The fifth time it only booted with a white screen and I stopped, as I had acheived what I wanted and the screen was already pretty damaged.

Thanks, a very, er, interesting suggestion. However I want the phone to look the same, i.e undamaged! But be bricked. If it's not possible, then I'll have to try and rescue the poor thing .

Best decision you could take. Hope you succeed!

spireite_uk said:
Guys, I need a bit of advice please.
After an accidentally botched radio install (phone fell and disconnected from USB whilst flashing), my HD2 won't boot. It gets stuck on the multi-coloured 'initial screen' (for want of a better expression) with 'SPL-1.42.HPSL XE CotullaHSPL' on it.
I'm looking to do one of two things, either rescue it, or, PREFERABLY kill it completely so that the device does not even boot to that screen. I know that sounds like a strange preference, but that would be ideal for me. Have you got any suggestions at all guys?
Click to expand...
Click to collapse
Does it show USB on the bootloader(multi-color) screen?
If it does you can flash a new radio/rom and maybe fix it ...
Or Flash from SDcard

I've managed to flash it to stock 1.43 from SD card, which appears to have also removed the HSPL. This is a win. However, I would still like to brick the phone so I can get a brand new replacement... I really could use a sure fire (but safe, and does not cause hw damage) brick method.

hspl, task29, remove hspl. you`ll get a white htc logo screen without the ability to enter bootloader.

However, I would still like to brick the phone so I can get a brand new replacement... I really could use a sure fire (but safe, and does not cause hw damage) brick method.
A friend (and yes - it was actually an friend and not me!) allegedly did this:
He took the socket from the end of an extension lead, put the plug into the mains socket and then VERY CARFULLY and very briefly touched the bare Live and Neutral wires onto the battery terminals in the phone.
240V into the circuit board apparently did the trick
**** Disclaimer ****
I think he was very silly to do this cos he could've hurt himself so please don't follow his example!
**** End Of Disclaimer ****

Hmm, yes, a method that doesn't involve microwaves or 240 volts would be preferable .

spireite_uk said:
I've managed to flash it to stock 1.43 from SD card, which appears to have also removed the HSPL. This is a win. However, I would still like to brick the phone so I can get a brand new replacement... I really could use a sure fire (but safe, and does not cause hw damage) brick method.
Click to expand...
Click to collapse
This kind of talks (insurance fraud) is illegal.
Thread closed.

Bought an HD2 for $20 but it has problems

When I picked it up it would only boot to a screen with a triangle with an exclamation mark in it and it says Software Update Failed! Please try again. He said he was trying to load Android but didn't know what he was doing and every time he pulls the battery that's as far as it gets. I figured for $20 maybe I can get it into bootloader and do something with it. I got it home and did a battery pull, put it back in and held the power button and volume down and nothing. Now it won't even turn on at all. When I picked it up he did a battery pull and turned it on to the Software Failed screen but now nothing. I've left the battery out for an hour, had it plugged in to 2 different wall chargers and every USB port on my computer and nothing. I even stripped a USB cable and held the wires to the + - terminals on the battery for 15 minutes and nothing. I'm hoping the battery is just shot or not taking any charge and a new one might at least get me to the bootloader.

I suggest you make a Gold Card to flash it with. This is like the one almost assured flash of Windows Mobile to your HD2. a Gold Card will force a flash sometimes. If you do not know what a Gold Card is just Google Gold Card for HTC HD2.
If you can flash Windows Mobile back to the HD2 you can then try Android again on it if you want.

jmac1968 said:
When I picked it up it would only boot to a screen with a triangle with an exclamation mark in it and it says Software Update Failed! Please try again. He said he was trying to load Android but didn't know what he was doing and every time he pulls the battery that's as far as it gets. I figured for $20 maybe I can get it into bootloader and do something with it. I got it home and did a battery pull, put it back in and held the power button and volume down and nothing. Now it won't even turn on at all. When I picked it up he did a battery pull and turned it on to the Software Failed screen but now nothing. I've left the battery out for an hour, had it plugged in to 2 different wall chargers and every USB port on my computer and nothing. I even stripped a USB cable and held the wires to the + - terminals on the battery for 15 minutes and nothing. I'm hoping the battery is just shot or not taking any charge and a new one might at least get me to the bootloader.
Click to expand...
Click to collapse
20$ !!! HOW ?????

Ill Buy it from you as is for $50 Australian dollars plus postage. The Australian dollar is worth like 50 gadjillion US dollars at the moment so its a great deal for both of us.

hungry81 said:
Ill Buy it from you as is for $50 Australian dollars plus postage. The Australian dollar is worth like 50 gadjillion US dollars at the moment so its a great deal for both of us.
Click to expand...
Click to collapse
to your surprise 50AUD = 53.48USD

backlashsid said:
20$ !!! HOW ?????
Click to expand...
Click to collapse
Because at the moment it's a $20 paperweight. Black screen, no charging light, won't even go to the software failed screen. I don't know anyone else with another HD2 I can use to check the battery or to use to charge it if it is dead. If worse comes to worse I'll send it off to HTC.

T-Macgnolia said:
I suggest you make a Gold Card to flash it with. This is like the one almost assured flash of Windows Mobile to your HD2. a Gold Card will force a flash sometimes. If you do not know what a Gold Card is just Google Gold Card for HTC HD2.
If you can flash Windows Mobile back to the HD2 you can then try Android again on it if you want.
Click to expand...
Click to collapse
I read the tutorial a couple times and I'm guessing the phone would have to have power to do this. This puppy is dead at the moment. For all I know it was Raptured during the night.

check the battery pins carefully for bent pins, and also, just to check, when you did the bare usb cable charging, you put neg to neg, live to live, right?(black to - red to +, , + being the outer one)
Id probably try a phone shop, see if they'l let you put a battery in for a few seconds, just to confirm if its the battery that has died, and if theyre really nice maybe theyl let you try your battery in their hd2.
If it IS the battery and you get it working, its dead simple, no goldcard or anything like that needed,, , the exclamation screen you got is from flashing an incorrect (wrong carrier/region) stock rom via sd card whilst hspl was installed, (its been removed now, by the start of teh sd card flash, thats why it gave rom update fail) and simply entering bootloader and reflashing using a rom correct for your serial will fix that.
(or indeed entering bootloader, applying hspl then flashing your chosen cooked rom and radio, , , or radio and magldr, whatever you want to do. Its a scary screen the exclamation one, but its one of the easiest to get past)

Yeah a phone shop is probably a good idea. There's a T-Mobile pretty close. I had an HD2 I sold last year that I had put some different ROMs on and Android so I figured if this one was stuck at the software failed screen it would be a pretty easy fix. I used it in the Yucatan for the GSM signal plus it doubles as a pretty good camera and bought this one because I'm going back. But reading the threads about it just being dead and not booting to anything makes me think it might be trashed. If it is I'm only out $20. If it's to pricey for HTC to fix it there are a couple on craigslist cheap with broken LCD's. Might try piecing 2 together.

unfortunately looks like you've bricked the unit, you can actually resurect it by using JTAG software/hardware http://www.youtube.com/watch?v=XroEPU4qyuM

rudy173 said:
unfortunately looks like you've bricked the unit, you can actually resurect it by using JTAG software/hardware http://www.youtube.com/watch?v=XroEPU4qyuM
Click to expand...
Click to collapse
That's what I was thinking. But I didn't do it, all I did was pull the battery. If it is it's only $20

Its not the famous tmous radio brick, unless you didnt mention something you did in your first post.
the only way it gets that kind of brick is flashing a radio from a regular HD2, the fact that the flash failed (exclamation screen) and you say you didnt try to flash anything else would point to a different problem. If the radio HAD flashed, the phone wouldnt have booted even to the excl screen.
You see, when you flash a stock rom via sd card, if hspl is installed it will allow the flash to start, but step 1 is first changing the spl(removing hspl) then the phone restarts into the new spl, and flashing continues. But because hspl is no longer there, cid checks fail and the flashing stops, so no radio gets flashed, so no radio brick.
radio bricks happen when you flash a non tmous stock rom via Goldcard or via usb whilst hspl is installed, because over USB, hspl is NOT removed at step 1 so the flashing is allowed to continue, the radio gets flashed, the phone dies.

samsamuel said:
Its not the famous tmous radio brick, unless you didnt mention something you did in your first post.
the only way it gets that kind of brick is flashing a radio from a regular HD2, the fact that the flash failed (exclamation screen) and you say you didnt try to flash anything else would point to a different problem. If the radio HAD flashed, the phone wouldnt have booted even to the excl screen.
You see, when you flash a stock rom via sd card, if hspl is installed it will allow the flash to start, but step 1 is first changing the spl(removing hspl) then the phone restarts into the new spl, and flashing continues. But because hspl is no longer there, cid checks fail and the flashing stops, so no radio gets flashed, so no radio brick.
radio bricks happen when you flash a non tmous stock rom via Goldcard or via usb whilst hspl is installed, because over USB, hspl is NOT removed at step 1 so the flashing is allowed to continue, the radio gets flashed, the phone dies.
Click to expand...
Click to collapse
You see the problem is I don't know what this guy did to it. All he said was he tried to load Android. When I picked it up in would power on and stop at the Software Failed screen. After I pulled the battery it does absolutely nothing.

jmac1968 said:
You see the problem is I don't know what this guy did to it. All he said was he tried to load Android. When I picked it up in would power on and stop at the Software Failed screen. After I pulled the battery it does absolutely nothing.
Click to expand...
Click to collapse
exactly, which is why im suspecting battery/battery pins/power issue, because it DID come on for you, meaning it isnt a radio brick, and the pins are very easily bent when the battery is pulled, one slight twist to the angle of rotation and the casing on the battery around the flat connectors catches the pins on the way up and out.
If he was installing android, he most likely installed magldr, which prevents teh battery from charging when the phone is off, hence me wanting to double check you were doing the USB bare wire charger correctly, because a totally dead battery won't charge in the phone, if magldr is there. And so, back to testing if its teh battery, thats what you need to confirm before you can move on,,,,, is the battery alive but flat? ten seconds with a known good battery, or a HD2 running winmo (can charge when off with winmo installed) will answer it for you.

Yes I made sure it was hooked up correctly. I held the wires on the terminals for what I thought would be long enough. Maybe the battery is junk? Thanks for the pointers though. I do appreciate the help.

In my first post last night I took it you were having a issue with getting a ROM to flash. I see now your issue is not this so I do apologize.
Samsamuel has givin you some great advice. Have you tried connecting your wall charger to the HD2 and then power it on? This is how I would get my HD2 to boot back up so I could charge if I accidentally let the battery drain all the way down and I was using MAGLDR. (Not a problem anymore thanks to cLK)
Now seeing as you do not have a ROM to boot into this will not charge your battery but just maybe prove the HD2 is not dead. I agree with Samamuel about it not being bricked, I think you just have battery/power issues right now, namely the lack of power.
Go to this thread that just sprung up last Tuesday in the HD2 Windows Phone 7 Q&A and General forum. Read the first post as it gives a method of charging your battery when dead using MAGLDR. I have not personally tested this cause I no longer use MAGLDR. I can not promise you it works but it is worth a shot. Let us know if this worked for you and post in the thread I linked as well if it works. That thread needs a confirmation post.

I tried 2 different wall chargers and just tried to tip in the thread you suggested. Nothing. Even tried a PowerMat for 3 hours.

jmac1968 said:
I tried 2 different wall chargers and just tried to tip in the thread you suggested. Nothing. Even tried a PowerMat for 3 hours.
Click to expand...
Click to collapse
Does this conclude that the battery is dead ??? and you might need a new battery ?

backlashsid said:
Does this conclude that the battery is dead ??? and you might need a new battery ?
Click to expand...
Click to collapse
It might be.

jmac1968 said:
It might be.
Click to expand...
Click to collapse
Then go for it

HD2 Bricked?

Last night, I noticed that ROM Manager had an update in the Android market
(512mb LEO with Typhoon Cyanogenmod). I hit the update button, and walked away for a while while my phone did its thing, as usual.
I returned about 15 minutes after and noticed that my HD2 was off. I could not, however, turn it back on.
Removing and replacing the battery did not help. The phone wouldn't charge via the wall socket.
My linux PC will not detect it (I checked my dmesg log when plugging in and turning on)
I left the battery out overnight, plugged the phone into the wall, put the battery inside. No luck.
I checked the battery voltage with a multimeter, and it reads about 3.9v.
I don't think it's the battery. I think my HD2 is somehow bricked! Is there anything I can do?
It's not under warranty any more, but if I send it for repair, do you think they will deny it (because it has Android on it)?
Enlighten me with your wisdom, XDA! I don't want to say goodbye to this amazing device!

xebozone said:
Last night, I noticed that ROM Manager had an update in the Android market
(512mb LEO with Typhoon Cyanogenmod). I hit the update button, and walked away for a while while my phone did its thing, as usual.
I returned about 15 minutes after and noticed that my HD2 was off. I could not, however, turn it back on.
Removing and replacing the battery did not help. The phone wouldn't charge via the wall socket.
My linux PC will not detect it (I checked my dmesg log when plugging in and turning on)
I left the battery out overnight, plugged the phone into the wall, put the battery inside. No luck.
I checked the battery voltage with a multimeter, and it reads about 3.9v.
I don't think it's the battery. I think my HD2 is somehow bricked! Is there anything I can do?
It's not under warranty any more, but if I send it for repair, do you think they will deny it (because it has Android on it).
Enlighten me with your wisdom, XDA! I don't want to say goodbye to this amazing device!
Click to expand...
Click to collapse
Did you try holding the volume down button and turning on the phone....
It should take you to the tri colored screen...
If you get there the phone is not bricked

casemandan said:
Did you try holding the volume down button and turning on the phone....
It should take you to the tri colored screen...
If you get there the phone is not bricked
Click to expand...
Click to collapse
Yes I have tried that. Alas, nothing...
Do you recon they will fix it even if Android was on it?

xebozone said:
Yes I have tried that. Alas, nothing...
Do you recon they will fix it even if Android was on it?
Click to expand...
Click to collapse
It is a little late for me to mention this, seeing as you have sent your HD2 in for repairs all ready. But your power/end button may have stopped working, if you still had the your HD2 you could try pressing the reset button by the SD card slot and see if the device booted up then. But that is not an option now.
If all you did was update ROM Manager via the Android Market. Then it should not have bricked your HD2 in any shape form or fashion. Further more it should not have caused your HD2 to turn off either. I mean when you are running NAND Android on the HD2 you are pretty safe from bricking your HD2 because both MAGLDR, cLK, and the actual Android ROM is flashed to the ROM partition of the NAND memory and never touches the real SPL bootloader partition of the HD2.
Plus did you check your battery pins before sending it in? One might have been bent slightly. Or it could have been dirty battery terminals not allowing a good connection.
Point is I very much highly doubt your HD2 was bricked. You probably just missed judged your situation is all. As far as will they fix it? If you are willing to pay the fee they charge then yes.

T-Macgnolia said:
It is a little late for me to mention this, seeing as you have sent your HD2 in for repairs all ready. But your power/end button may have stopped working, if you still had the your HD2 you could try pressing the reset button by the SD card slot and see if the device booted up then. But that is not an option now.
If all you did was update ROM Manager via the Android Market. Then it should not have bricked your HD2 in any shape form or fashion. Further more it should not have caused your HD2 to turn off either. I mean when you are running NAND Android on the HD2 you are pretty safe from bricking your HD2 because both MAGLDR, cLK, and the actual Android ROM is flashed to the ROM partition of the NAND memory and never touches the real SPL bootloader partition of the HD2.
Plus did you check your battery pins before sending it in? One might have been bent slightly. Or it could have been dirty battery terminals not allowing a good connection.
Point is I very much highly doubt your HD2 was bricked. You probably just missed judged your situation is all. As far as will they fix it? If you are willing to pay the fee they charge then yes.
Click to expand...
Click to collapse
Hah. I don't know where you assumed that I have already sent it in. I'm the kind of person who tried to fix it myself first
Pressing the reset button doesn't do anything. I tried holding it down while inserting the battery too, and nothing,
The battery pins do not appear to be bent or dirty. I gently pushed them upright, and down, and scraped the surface gently in case there was any layers of dirt, still nothing.
I have a sibling with an HD2. I can test the batteries later.
Do you think somehow, the NAND can be worn from multiple reads/writes until it dies? It is flash memory after all, and that last write from the update could have pushed it...

xebozone said:
Hah. I don't know where you assumed that I have already sent it in. I'm the kind of person who tried to fix it myself first
Pressing the reset button doesn't do anything. I tried holding it down while inserting the battery too, and nothing,
The battery pins do not appear to be bent or dirty. I gently pushed them upright, and down, and scraped the surface gently in case there was any layers of dirt, still nothing.
I have a sibling with an HD2. I can test the batteries later.
Do you think somehow, the NAND can be worn from multiple reads/writes until it dies? It is flash memory after all, and that last write from the update could have pushed it...
Click to expand...
Click to collapse
Hmmm sorry I thought you had sent it in for repair already. Guess I miss read that, my bad man.
Yes NAND chips are rated for only a number of flashes. But that number is very high. I can not remember the exact numbers right now but hey that is what google is for right? But you did not flash a ROM you just uninstalled a app and then installed the updated version of that app. But then again I guess when you install or uninstall a app it is performing a some what similar action. Still though flashing a ROM is flashing a ROM, and installing a app is installing a app. One is a a lot different than the other.
My money is with your battery being bad. I mean like I said updating your ROM Manager should not have caused your HD2 to turn off at all. Try your sibling's battery and report back, I really hope that fixes it for you.

I haven't actually installed any Android ROM myself. But I did lots of WinMo ROM updates. What strikes me is that you installed a new ROM through the Android Market. Is that a normal procedure to upgrade an Android ROM on the HD2?

T-Macgnolia said:
Hmmm sorry I thought you had sent it in for repair already. Guess I miss read that, my bad man.
Yes NAND chips are rated for only a number of flashes. But that number is very high. I can not remember the exact numbers right now but hey that is what google is for right? But you did not flash a ROM you just uninstalled a app and then installed the updated version of that app. But then again I guess when you install or uninstall a app it is performing a some what similar action. Still though flashing a ROM is flashing a ROM, and installing a app is installing a app. One is a a lot different than the other.
My money is with your battery being bad. I mean like I said updating your ROM Manager should not have caused your HD2 to turn off at all. Try your sibling's battery and report back, I really hope that fixes it for you.
Click to expand...
Click to collapse
Hmm... I have an interesting development.
I tried my sibling's battery, and it didn't help, but what I did notice is that the phone vibrates slightly when I turn it on (as it should), but it does so very weakly. So weakly that I need to put my ear against the phone to hear it.
I don't think it's the LCD, because the charging light still doesn't work.
It probably needs a new mobo.
Any suggestions before I take it in for repair?

Cenobite_ said:
I haven't actually installed any Android ROM myself. But I did lots of WinMo ROM updates. What strikes me is that you installed a new ROM through the Android Market. Is that a normal procedure to upgrade an Android ROM on the HD2?
Click to expand...
Click to collapse
No, I didn't install a ROM on the market. It's an app called ROM Manager

xebozone said:
Hmm... I have an interesting development.
I tried my sibling's battery, and it didn't help, but what I did notice is that the phone vibrates slightly when I turn it on (as it should), but it does so very weakly. So weakly that I need to put my ear against the phone to hear it.
I don't think it's the LCD, because the charging light still doesn't work.
It probably needs a new mobo.
Any suggestions before I take it in for repair?
Click to expand...
Click to collapse
Yeah I agree with you it sort of sounds like something in the main board has malfunctioned. My guess is the processor or the NAND chip one. I would just send it in for repair if I was you. Maybe your HD2 just finally died, I know it sucks. But if you are willing to pay for the repair then you should be back up and running in no time. I am assuming you plan to send it to HTC for repair right? If for some reason they do give you a hassle about Android being on your HD2 and will not repair it. Then contact me I might know somewhere you can get a new main board put in it.

I got my HD2 back today.
Apparently it's not worth fixing...
I also got robbed today... Just my luck.
I cannot afford any other phones atm, but what do u think would make a good candidate replacement for the future? I don't think any other phone has the same kind of mod-ability and support here at XDA, but I would be delighted if you could prove me wrong.
My friend has a Galaxy S2, which is cool, but it doesn't have notification LED :/
Is there much hacking/dev on the GS2?

About to buy a HD2 Ebay

Hey guys I'm about to buy an HD2 on ebay and it reads this description :
when you start up the phone, it stops at the first screen and freezes... or sometimes stays on black screen.
so it could be a simple fix for repairs, or use for parts.
im winning the bid so now my question is. Is this a hardware problem or like i can restore it with a new rom and see if it works.

It could be either. If you do get it, my suggestion would be to install cLk or MaGLDR to bypass the bootloader - that would be the most likely thing that would be broken if it freezes. If they do work, then your phone should be fine.

Schweet man! Congrats I bet you picked it up at a decent price too.
First get the hd2 toolkit ( this this is invaluable when it comes to getting this baby where she needs to be!)
I would task 29 and start her out from scratch! Good luck !!!

Here's the link to the HD2 toolkit.
I bought a HD2 off ebay in 09 for $80 that was in mint condition with the same issues listed. Now i've learned a lot since then but at the time i could not get it working no matter what i did. I called HTC who repairded it for free since it was still under warranty. With that said you may run into some problems fixing this but I feel if you get the phone around $150 and under and you dont get it working you should still be able to resell it and get most if not all of your money back. There has always been a demand for this model phone so i would go ahead and buy it.

Snowled said:
It could be either. If you do get it, my suggestion would be to install cLk or MaGLDR to bypass the bootloader - that would be the most likely thing that would be broken if it freezes. If they do work, then your phone should be fine.
Click to expand...
Click to collapse
that depends a lot on whats wrong, those do not bypass the bootloader as such, they extend it, if the SPL is buggered then its buggered unless you can replace it.
your issue could be a number of things, it might just need a reflash, if at all possible get it in to the original bootloader, and SD card flash an original stock ROM for that device, that will overwrite everything.
Course if you cant get the bootloader working then unless you know someone that can connect it up and reflash it your looking at sending it away
another problem could be the RAM, or NAND, several times folk have run in to problems with these getting buggered up, if so your screwed.
On a side note I would ask about screen bleeding, on second hard devices you can sometimes get a lot of leakage through the screen from the back light making lighter blobs on the screen, this is very noticeable on light or white background, dark backgrounds doesn't really show to bad but its worth asking for... good luck!

Hey thanks guys for the reply. I picked it up for 65$ it's coming today free shipping and everything. I had a HD2 before but sold it for a iPhone 4 (Horrible Decision) So I picked up another one. The thing is with this HD2 it has no Rom, Radio information in the bottom left at boot up. I'm assuming it's Task29'd right.

Once you got it, we'll be happy to help
Sent from my HD2 using XDA Windows Phone 7 App

Alright guys. Today I received my HD2 in the mail and I had one once before in the past. I bought this on Ebay claimed it was broken because it was stuck on the stick together screen I got it for 65$ and now I turned it on it was stuck there. I went to the bootloader it was SPL 2.08 and now I removed the battery but I can't get any response to turn on anymore. When I plug in a charger theres no orange led. I checked the back on the phone it looked like it was opened up before because the void label is all smashed but visible. Is it bricked? The seller said it would sometimes go stick together or stay black. I'm trying my best to turn it back on atleast to bootloader because I have no ****ing working USB to PC cable. and keep it like that till I get one. Any help?
Okay i just got it to turn on but I didn't get the chance to enter the bootloader just Stick Together. I have no clue if it's just random or the battery is going poop. I will try to get it to respond at least so I can enter the bootloader and find a working usb cable. It doesn't even say "Serial" when i enter it.

IT TOOK ME FREAKING FOREVER. But. I got it working on the bootloader with "Serial" SPL 2.10. I'm hopping this thing can stay on long enough to go get a working usb charger.

blahblah13233 said:
IT TOOK ME FREAKING FOREVER. But. I got it working on the bootloader with "Serial" SPL 2.10. I'm hopping this thing can stay on long enough to go get a working usb charger.
Click to expand...
Click to collapse
do you have anyPC- USB cables or USB mains charger.
it sounds like your first problem is the battery is dead, get it in bootloader and leave it plugged in, it takes ages but it will charge up assuming your charger is give it more than 200mA, failing that, get an external charger, to be honest with the current state of the HD2 and WP7 battery usage its worth while getting a charger an second battery any way!