Slow SPV M1000 with tomtom2? - MDA II, XDA II, 2060 General

Hi.
I dont know what is causing it, but it seems, that my SPV M1000 is REALLY SLOW on some occasions.
Having unlocked it, and after that installed tomtom2. I've been using it, and can see that there are problems with the update rate, etc.
there is a 32MB SC/MMC card installed.
Device info says:
Operater version: 3.66.4.150
ROM version : 1.66.00WWE
ROM date : 02/20/04
Radio Version : 1.10.00
Protocol version : 1337.18
ExtROM version : 1.66.150
it was unlocked with xdaUnlock2
The problem is that it appears flakey, sometimes it works flawlessly, and other times it comes to stuttering/ laggy halt. Even using the contact list showed lagginess (I think tomtom2 was running in the background), in that the lines in the contact list was updated one at a time, with around 1-3 seconds between each update..., updates on the tomtom2 map appears to take forever sometimes, and this can happen at both max and min zoom levels (although the problem is most apparent at min zoom levels).
Does anyone know a cure, or have experienced something similar? Would it help to install tomtom3? (some says its more reliable, but I've seen others using tomtom3, where a land mass became a swampy area ... well at least at some of the highest zoom-out levels.
Thank you for your time.
Best regards : Jacob Eskildsen / eskildsen

Related

JasJar Cant overclock past 520mhz!!! :( (XCPUSCalar et al)

Guys,
Have you noticed that when you try to overclock the JasJar past 520mhz it freezes and then displays a blank blue screen.
I was attempting to overclock it to 624mhz using Pocket Hack Master 2005 and XCPUScalar (latest version) when I noticed this.
It underclocks OK though... (416, 312, 208 etc)
Through research I'm aware the the Intel Bulverde (pxa270) should have the ability to overclock to 728mhz using the to 2 mentioned utilities.
Has anyone else experienced this?
Anyone else experiencing this????
Anyone????
Patience dear boy.
Considering how new the Universal is. Very few people have them at the moment. Even fewer will have actually tried to overclock them.
I will give it a go tomorrow.
maybe wait a little for a wm5 update
Thanks Rilot!!
I guess your right - need to give the device time to mature...
Have you had any luck on the VGA hack you were working on?
Having problems with the VGA hack.
I can get the device in to low DPI mode (what we call real VGA mode) but I can't get the icons to work properly no matter what dlls I use. WM5 seems to throw a fit every now and again when running in this mode.
I think I may have to defer this project to someone with greater knowledge of how WM5 does it's stuff.
I see...
WM2005 seems to be very very touchy about things...
I am also looking into "Real VGA" mode - as I learn more I'll post my findings...
Thanks for the support
I am running 624 MHz
I used Pocket Hack master 2005 (V3.15) and managed to overclock to 624Mhz
Bus 208 RAM 104 LCD 104
Giving me
SI 372 MIPS 261
Which beats the 520 clock's
SI 341 MIPS "17
noticed that today screen refreshes much better and overall noticably more responsive!
cool
MrGinger,
Did you test 624mhz using the "speed configuration" in Pocket Hack Master?
Did you use the 624mhz option thats already there or did you create your own 624mhz profile?
Yes I used the speed configuration in pocket hack master.
I used the preset one under "filter > generic > Intel PXA270 Official"
At the bottom of the list
624 208 104 104
Tested fine for me (multiple times so not a one off fluke) and is v.stable... is it giving you problems?
Bombs out with blue screen on 728 though!
I just did exactly that - used those exact settings and it displayed the Blue Screen and froze... Soft reset required...
Are you using and Imate JasJar from expansys as well?
My device information is:
ROM version: 1.12.38 WWE
Rom date: 08/24/05
Radio version: 1.03.00
Protocol Version: 42.36.P8
ExtROM Version: 1.12.120 WWE
Are any of your device Software revisions different to mine?
This is admittedly frustrating me a little...
probably less stable
This is dodgy so probably means this is not too stable will let you know tomorrow!
tried 728 and boom
soft reset then into speed configurator
filter > generic > Full
takes ages to render but I tried
676 208 104 104
and it worked!
So I went down to 728 208 104 104 like I did before but from the full list
AND IT WORKED!!
Wait a mo (5 mins later)... just tried hot swapping to 728 from today screen and BOOM this is not at all stable on mine
Also noticed that SI score was 318 as was the 676MHz score, both bad as 624 had SI of 372...
My gut feeling is the thing only like 624 tops
..... just tried hot swap to 676 and boom aswell...
624 is the only stable overclock on mine!
hope this helps
Question: wil overclocking chew through my battery life?
sorry missed your last post.
Mine is same as yours
jasjar from expansys
have 2GB momy memory sd and voda sim
running sbp pocket plus not that it should make a difference
rom 1.12.38 WWE
date 08/24/05
radio 1.03.00
protocol 42.36.P8
ExtROM 1.12.120 WWE
exactly the same as yours
got mine delivered last friday
this is weird... i can feel your pain
Yes overclocking does take its toll on the battery life.
But I find it extremely useful to dynically set the CPU according my personal usage patterns.
For example on my MDA3(IMate PDA2k, O2 XDA2s) I would underclock the processor to 200mhz when it was on standby and overclock it to 472mhz when working on it.
I going to try your settings now and see what happens...
BTW - you help is really appreciated.
May not be relevant but if you have XCPUScaler still on your jar try removing it first then soft reset then pocket hack speed conf
just trying to think of suggestions.
signing off for the night. I'll check in tomorrow
Thanks MrGinger,
You have been very helpful - Really appreciated
I'll look into this further tomorrow and post my findings.
overclocking
Is there a chance of frying the mobo by overclocking, I did that once with a PC, I dont want to ruind such a pricey investment by gaining a few seconds of load time thought
nabil2000,
The Intel XScale achitecture allows for speeds in excess of 624mhz.
The fastest stable speed I am aware of is 728mhz on the Dell axim x50v which also features the Intel Bulverde processor (PXA270).
I am trying to make my JasJar operate at 624mhz as MrGinger has managed to get his to function in a stable manor at this speed.
MrGinger's JasJar also features the same software and rom revisions as mine.
Also I do not believe oveclocking to 624mhz will damage the device in any way.
I have owned a Xda1, 2(Himalaya), and 2s (BlueAngel).
Most of the time I had my Xda2 and 2s (PXA263) overclocked to 530mhz with no detrimental effects.
I still have the blue angel and it works perfectly. (Lost my xda2...)
Both devices were very fast and responsive at that speed - however, unsurprisingly, they didn't last long between battery charges.
qazzi76,
thanks dude,
I might consider overclocking it then, speed improvements and responsiveness are always welcome
Nabil H out
Just a short question about all this:
Is the JasJar running WM5 actually faster than an iMate PDA2K on WM2003 and overclocked to 530Mhz?
Or since4 the system is still running on ROM based Storage it still drops down in performance especially in Calendar and Contact lookups?

reboot problem - you probably have it and don't know it

I remember someone mentioning that the wizard (in my case the K-Jam) reboots sometimes.
I have had mine about 2 weeks, and have not noticed this...... until I enabled the phone SIM lock that is! I first noticed this when the phone was on whilst charging.
I know now when it is rebooting, as the SIM lock appears again. I am using the SD card, and I heard that had something to do with it.
I have the latest ROM from Imate, as it was the new batch that shipped.
Does anyone know what causes this or if there is a fix? how many others have found this?
Mine K-Jam has rebooted 3 times last 2 weeks. Once during a phonecall. Once while connected to my computer and one time while navigating.
I first thought it had something to do with my magnetic car holder. I have a small magnet on the back of my battery door and I thought that while driving the battery would have lost it's connection so I put some ducktape on it... :wink: But then it happened when connected to my pc and doing nothing :?:
I don't see a patern yet..
Wouter
No random reboots here - had a KJam since the first week in October with a 1GB miniSD card and SIMLock on since day 1.
KJam info:
ROM v1.1.9.3
ROM date 9/16/05
Radio version: 01.01.10
Protocol version: 4.0.13.16
ExtROM version: 1.1.9.104
Forgot to mention. I got my simlock on since the beginning (14-10-05)
Wouter
As said before, mine started rebooting after I installed SKYPE, once I removed SKYPE the problem went away.
I don't have Skype installed...
Wouter
I have had Skype installed since the off without issue. Currently running the latest Skype release, installed on the miniSD card.
I have the same problem ... it reboots very often, the funny thing is that it doesn't ask for pin when rebooting, it automatically logs on the GSM network...
I also often receive a message "unable to launch /Program Files/Skype/Skype.exe or so" ... I moved skype from SD to device but it didn't help ...
PS: I have a german Vodaphone VPA compat II (same hardware but different look) ... maybe it has something to do with a buggy ROM ? ...
Same here on my Qtek 9100.
I even missed out on a date waiting on a phonecall, did not know that my phone had secretly rebooted and was not loged into the network.
My dopod is rebooting since the very first day. I had installed verious ROMs > no difference. I can't find any reason for it. As someone mendioned already, it is very embarassing sometime since you don't know when the phone reboots and you are off line. I can tell you I would not buy this phone anymore. For me this shoiuld be a working tool and not a toy. My pda phone before (Blue Angel) had also some problems, but over all it was working much better then this piece of s....from Dopod. (Sorry my language). If you browse in this forum you must get the impression noone has evre tested these pda phone before drop them to the market. I just hope there are poeple in Taiwan at HTC and at Microsoft who read some of those forums, so we can hope to get some improvment the next future..
By the way this is the 3rd HW, the first two pieces where not working at all.
I also experience the same problems because of Skype. My
k-Jam came from Expansys with Skype on the extended ROM and of course SIM free. Skype couldn't even start on the pre-installed version. I unlocked the Extended ROM and threw out Skype and the AV (no more annoying prompts). Now the device seems to work fine, a bit slow though. I tried ti install the latest Skype version for slow CPU and experienced the same problems. High CPU works but hardly connects. I am still not sure how to have Skype runnung on my device as I travel a lot and can definetly use it with Wi Fi.
It seems skype has something to do with those reboot problems; but it's not the only one -- yesterday my 9100 was rebooting every few minutes (5-10); I then removed the miniSD as suggested above, it seems to have fixed the problem... need some more days to be sure. I'm gonna try to reformat my miniSD (which I formerly used on my SPV C500, some strange problems from time to time as well, but not so frequently) to check if it helps,
let's see !
gilsas
same here; spontaneous reboots. Did not use Skype when the first reboot occured.
Maybe it has to do with the programs intalled on the SD card?
I used to have those spontanious resets for a long time and I used to install a lot of programs on my mini sd card.
I haven't had any for a month now (and I had the latest light version of Skype installed) since I installed all programs in main memory. Of course not all programs. TomTom Navigator is on my storage card but I never leave it open when shutting my k-jam down.
Wouter
I get a few a week (maybe more that I don't notice) Uninstalled Skype from the beginning. Mine simply reboots and goes back to the today screen.
The treo 650 has a key combination that tells you what problems caused the soft reset, anything like that on the KJam (Wizard)
Well so much for my not having any spontanious soft resets anymore.
I just had another last night
I had a couple of programs open (Pocket Informant, Resco Explorer, TCPMP, MyPersonalDiet and Inbox). Maybe it was TCPMP because it plays files from the storage card... :?:
Wouter
After I've kept my QTEK 9100 on for 5-10 minutes (seems to be 7 or 10 minutes) without using it, it suddenly reboots, showing the ROM-version and all that (booting up).
My thoughts are that there's a problem with the automatic power off function (controlled by "power usage" in the Settings) that makes it reboot instead of just turning off the device but I havn't changed the automatic power off time limit enough to know if this really has something to do with it. Anyone else tried this?
EDIT:
I've now tried to change the automatic power off to 1 minute:
After one minute the QTEK power off, but after 5-10 minutes it reboot itself (turning itself on again). That means, from all that I understand, that it has nothing to do with the power off function.
I should probably mention that I have Skype 1.2.0.89 installed. What versions of Skype do you have? Anyone with Skype -installed- not experiencing the spontaneous reboots? I don't think you need to have Skype running to experience these problems - it seems to be enough that it's installed?
Anyone know if it has something to do with what ROM you're using?
QTEK 9100 (bought around 2006-01-10) with Swedish OS
ROM-version: 1.3.7.13 SVE
ROM-date: 9/29/05
Radio version: 01.04.10
Protocol version: 4.0.13.17
ExtROM-version: 1.3.7.125
I use a dopod 838 and I have the same problem as well. Strangely, this is not widely mentioned in this forum. I get one or two resets a day, and can be rather disturbing.
I do not have Skype installed, but have several games installed in the miniSD.
I'm currently using the Kjam rom, but I have had the same experience with the origianl DOPOD rom as well as the O2 rom.
I have Wisbar 2 (beta for WM5) installed, and had thought it to be the problem, but I got a reset even after it was removed.
I do not have SKYPE.
I have TCPMP installed, but rarely use it.
I'd really like to get to the bottom of this. Should I have this device turned in for warranty?
i found this problem alot when using the tweaks 2k2, when i moved the shared dll files to the storage card it keeps on restarting every two minutes or so. but that was the only situation that it reboots, other than that, never.
i have this rom:
rom: 1.1.9.3
date: 9/16/05
radio: 01.01.10
ext: 1.1.9.106
device: K-Jam
but once i redo the process, i never had a rebooting problem, that was 3 weeks ago.
Maybe if we compile a list of what we have running, we can find some common elements. I'm using the K-Jam
I have:
TCPMP - rarely use
MS Voice Command
SPB Pocket Plus
Pocket Weather
PocketZenPhone - currently disabled
PhoneAlarm (beta but the resets were happening before installation)
GSPocketMagic
Sunnysoft Backup Manager
MortRunner
StartUp Menu Contents:
bkpMgrDeleter (party of sunnysoft)
CapNotify (not sure of this)
GSPocketMagic
Init_Tray
poutlook
sddaemon (what is this)
Services
Voice Command
I have made the speed improvement hacks

Memory Leak + ****ty Battery life + Lockups = Getting tired!

I don't know.. ever since I got my brand new O2 Exec I've been getting less and less productive in work. The machine is indeed cool, but only when it works. I'm early adapter but it's been for the past month or so that I'm working for the machine instead of the machine working for me.
Memory leaks are out of this world. Memory is not freed up many times and I end up easily with 3mb of free ram even if no program is on. The battery life is terrible (to say the least) compared to my good old PDA2K (even with it's over 1yrs old battery! it blasts the Exec memory miles away)
Lately, the amount of lockups I am getting is simply unbearable. machine freezes.. sometimes the left soft button's caption (i.e "phone") graphics is seen like a small white box or something(as if all the letter go over each other) and then machine freezes. Something an alert comes up and then machine freezes. I can't trust the machine for business use, for games yes, but not for business.
Please note I don't have many programs running at all, no wisbar or cosmetic stuff like that., no SPB Plus and stuff like that. Just PocketInformant, PocketBreeze, phoneAlarm all of which are must have for me as well as some utils i relay on. I am wondering maybe my ROM is outdated, but I didn't see an update from O2 yet (I don't want to install NO_ID tool and flush other roms than OS own due to warrenty issues)
I have OS2 Exec with following ver:
ROM version: 1.13.82 WWE
ROM date: 11/30/05
Radio version: 1.04.02
Protocol version: 42.37.P8
ExtROM version: 1.13.188 WWE
Is there any Official update from O2 to any of these ?
Help is very much appreciated. That's before a 10kg hammer is blaster over the machine in an act of anger.. lol
MOBILER
Here are my suggestions:
1st Upgrade to the latest I-Mate Jasjar ROM. It is definitely faster than the shipped ROM from O2 and highly stable.
ROM version: 1.30.76 WWE
ROM date: 02/20/06
Radio version: 1.09.00
Protocol version: 42.42.P8
ExtROM version: Delete and install only what you need.
2nd I use Oxios Memory which has 2 useful applications in it. Oxios Close apps and Oxios Hibernate. I learned about this here in one of the forums. It basically free up a substantial amount of unused memory. Here is a link: http://www.oxios.com/memory/
As far as battery is concerned. I don't have a problem with mine. I keep it plugged in every night to charge playing a lecture DVD while I sleep.
So far O2 has not released an update yet. The last official ROM they released, I believe you are already using it. Let us hope when they do release something it would have the complete Windows Mobile Update support for BT headsets and Push email.
cktlcmd said:
Here are my suggestions:
1st Upgrade to the latest I-Mate Jasjar ROM. It is definitely faster than the shipped ROM from O2 and highly stable.
ROM version: 1.30.76 WWE
ROM date: 02/20/06
Radio version: 1.09.00
Protocol version: 42.42.P8
ExtROM version: Delete and install only what you need.
2nd I use Oxios Memory which has 2 useful applications in it. Oxios Close apps and Oxios Hibernate. I learned about this here in one of the forums. It basically free up a substantial amount of unused memory. Here is a link: http://www.oxios.com/memory/
As far as battery is concerned. I don't have a problem with mine. I keep it plugged in every night to charge playing a lecture DVD while I sleep.
So far O2 has not released an update yet. The last official ROM they released, I believe you are already using it. Let us hope when they do release something it would have the complete Windows Mobile Update support for BT headsets and Push email.
Click to expand...
Click to collapse
Thanks man, I highly appreciate your detailed helpful response, but two issues :
1) As I said, I do not want to install the i-mate JJ ROM over the O2 one due to warrenty issues. So I think I would prefer to wait for the official O2 release thought I am starting to loose patience..
2) I also use the MagicButton app on my Exec. It seems very efficient at closing programs and switching tasks with minimal memory footprint. I'll look into the program you mentioned, but I doubt that's the problem. My machine has memory leaks because even when programs are all closed after several hours of use I can get down to 3mb free RAM.
Regards
MOBILER
Do you use the brilliant SBSH Ilauncher as this has very bad memory leaks being looked into at the moment
@mobiler,
we must have twins! I have mentioned similar problems with my Exec to those you discovered and when I reported them here people were unhappy and accused me of not knowing how to use a Exec properly!
You may want to look at the following:
1. Powersave does reduce battery drain but you may a slight delay to being alterted to incoming calls
2. Reformat your SD card if you use data files (eg music, ebooks etc) a lot. I found that MS Reader and Windows Media player were not happy with the use of Powersave - often I would get a systems crash after restarting the device. But after a reformat of the SD card the device was much more stable
3. You can get good quality spare batteries now for the Universal from www.mobilefun.co.uk
I had a few issues with PhoneAlarm, nice piece of software does exactly what I wanted as well, apart from I had some compatability issues.
Slowed the phone down alot and if my memory serves me correctly ( I have a few too many memory leaks of my own going on ) made the phone freeze a couple of times.
Tried the trial version of Pocket Informant ( had it as standard on an IPAQ HX4700 and quite liked it ) but that caused me a few problems.
I now keep things simple, using PocketZenPhone for switching profiles ( very nice and simple solution ). Use the O2 web site to keep track of number of txts sent and phone call allowance.
SPBGPRS monitor for the obvious monitoring of GPRS usage.
Using the standard contacts and calender ( does me ok but not as flexible )
And I have just started messing about with Wisbar, No problems as off yet.
Personally I have found all problems with the phone are linked to software incompatabilities.
I am still in warrenty with O2 but have updated to the latest ROM and radio and if for any reason it has to go back I will try and flash back but my way of thinking is that I should be allowed to change to any ROM image I want in the same way as load any software I want.
Dont know if that is of any help at all, just my views on trying the same software. Regardless of how good they are, they caused problems for me so now I dont use them and everything seems to be running ok.
I know this is anachistic but I am also annoyed by the occasional reboot and have discovered (shock horror) that having as few TSRs running (i.e. none) as possible much reduces this. I used to run magic button and I am convinced that this caused the occasional lockup. These days I only have vbar (2.2) installed and run it at times of need (i.e. I don't run it all the time) as well as using the memory item in the settings to kill programs.
Running the virgin corporate install o2 ROM with no TSRs. Using PIE and Netfront, and the built in outlook, together with a number of games, has meant that my xda is quite reliable. I am hoping that my 'once every 2-3 days reboot' will be gone once the new xda rom comes out :shock:
I can also recommend memmaid to occasionally clear our broken registry settings.
WM5 has been a painfull experience for the PDA manufacturers. If you think we are having a bad time you should read the stuff about the dell axim x50 upgrade on aximsite. I am hoping that WM5.1 will be a free install for universal users as this will make the os more robust.
On an optimistic note the chipset employed by the universal is well used and very reliable in many applications, the construction is robust, so IMHO it all comes down to software/firmware which we hope will improve.
I suppose that is what I was getting at.
Keep it simple.
Whether it is a stability problem with WM5 or just the third party software solutions I dont know.
But when I keep it simple, it works and works well.
I never mentioned battery life earlier, this weekend I went away with a full charge, granted I took another smaller phone with me but I did use it quite heavily ( playing Bejewelled, surfing the net and sending MMS ) and it was always on .
This morning it was on about 40% charged. Not too bad I thought compared to previous Windows Mobile phones I have had.
I use memmaid as well to do a bit of house keeping.
I was using spbPocketPlus mainly for its Task Handling, but thought I would give WisBar a shot. Having a proper close option to hand is very handy and should be included as a standard option in any version of Windows Mobile.
If I am not using a program I want it to be shut down properly. Like using a PC I only have the programs running that I am using.
FWIW, I am new to this device, but not to PPC, so I am familiar with minimize/close distinction. My orange SPV M5000 loses about .3MB per program invocation. I shut down programs using either the program's own Exit function (where it exists) or the Memory tab in the settings area. But the memory is slowly eroded. The worst culprit is Activesync to my laptop, that consumes around 5MB that never comes back. After a soft reset there is about 23MB free, this quickly drops to around 18, then steadily drops. Something in the OS is not releasing memory. I have to soft reset to get the memory back (which takes about 3 minutes).
I suppose that is what I was getting at.
Keep it simple.
Whether it is a stability problem with WM5 or just the third party software solutions I dont know.
But when I keep it simple, it works and works well.
I never mentioned battery life earlier, this weekend I went away with a full charge, granted I took another smaller phone with me but I did use it quite heavily ( playing Bejewelled, surfing the net and sending MMS ) and it was always on .
This morning it was on about 40% charged. Not too bad I thought compared to previous Windows Mobile phones I have had.
I use memmaid as well to do a bit of house keeping.
I was using spbPocketPlus mainly for its Task Handling, but thought I would give WisBar a shot. Having a proper close option to hand is very handy and should be included as a standard option in any version of Windows Mobile.
If I am not using a program I want it to be shut down properly. Like using a PC I only have the programs running that I am using.
Have you tried using the Exec in Corporate mode? It works fine for me
@ChristopherTD, I setup a dummy Activesync server and then set Activesync to manual and I have found this make my Exec more stable - perhaps it is because it does not lose as much RAM as before.
It is surprising that after 6/9 months of WM5 availability that we are still having instability problems with major/popular WM5 apps. I only use GSPMagic, Agenda Fusion, MS Reader and Opera. Only GSPMagic and AgendaFusion have been trouble-free.
WM5 was intended for programs to keep running. I know we like to hack our machines to death + sometimes the memory gets too full and you have to kill stuff. But sometimes if you keep MS stuff running, and don't kill it all the time with something like magic button, you find the system runs better.
I have activesync, contacts, outlook and PIE open all the time. I used to kill activesync all the time and I think this caused problems.
Normally my games have proper exit buttons, together with pRSSReader (totally excellent program). For the MS built in programs I tend to leave them running as the OS was designed for this.
Wow I think its pretty clear I ended up with a good unit afterall, either that or o2 really really messed up with your ROMS.
I have to charge my battery every night but thats to be expected with the usage I have. And im running Wisbar Lite, PhoneAlarm, PocketBreeze, and Wisbar Advance Desktop, all no worries, the only time I notice a distinct loss of memory is after player Warring Nations.
I feel for you guys, I think your summing it up that your working on your device as opposed to it working for you says it all.
Thanks for all the responses. You're all great guys!
Please see my responses below to all suggestions:
Darren_Bridgeland said:
Do you use the brilliant SBSH Ilauncher as this has very bad memory leaks being looked into at the moment
Click to expand...
Click to collapse
Thanks, but no. I don't use SBSH Ilauncher. I use MagicButton which has a minimum memory footprint
jah said:
@mobiler,
we must have twins! I have mentioned similar problems with my Exec to those you discovered and when I reported them here people were unhappy and accused me of not knowing how to use a Exec properly!
You may want to look at the following:
1. Powersave does reduce battery drain but you may a slight delay to being alterted to incoming calls
2. Reformat your SD card if you use data files (eg music, ebooks etc) a lot. I found that MS Reader and Windows Media player were not happy with the use of Powersave - often I would get a systems crash after restarting the device. But after a reformat of the SD card the device was much more stable
3. You can get good quality spare batteries now for the Universal from www.mobilefun.co.uk
Click to expand...
Click to collapse
Thanks, I felt I was the only one having problems Anyway:
1) I am always in powersave, still loosing battery power.
2) I just purchased a new SD card yesterday because I thought that may have caused the problems, but it's not it.. same problems.
3) I'll look into spare batteries, thanks for the link
ninja12innotts said:
I had a few issues with PhoneAlarm, nice piece of software does exactly what I wanted as well, apart from I had some compatability issues.
Slowed the phone down alot and if my memory serves me correctly ( I have a few too many memory leaks of my own going on ) made the phone freeze a couple of times.
Tried the trial version of Pocket Informant ( had it as standard on an IPAQ HX4700 and quite liked it ) but that caused me a few problems.
Click to expand...
Click to collapse
I appreciate the reply.
1) I've purchased and used phoneAlarm for about a year straight with my PDA2K and it never failed me any problems. I consider it a must have, and since it ran quite smoothly on my PDA2k I don't see why it should cause the Exec these issues. Further, I did remove it and still exeprienced the same issues, so that's not the problem either.
2) I've used PocketInfromant for 1.5 years now and no problem on my old PDA2K.
colonel said:
I know this is anachistic but I am also annoyed by the occasional reboot and have discovered (shock horror) that having as few TSRs running (i.e. none) as possible much reduces this. I used to run magic button and I am convinced that this caused the occasional lockup. These days I only have vbar (2.2) installed and run it at times of need (i.e. I don't run it all the time) as well as using the memory item in the settings to kill programs.
Click to expand...
Click to collapse
Thanks for the reply, I've been using MagicButton for almost as long as I can remember and it never failed me. It worked superb on my PDA2K. Further, I tried removing it for a few days to check how things would work without it. Same lockups, same memory leaks, same mediocre performance, unfortunately (or fortunately) this isn't the problem either.
weasel said:
Have you tried using the Exec in Corporate mode? It works fine for me
Click to expand...
Click to collapse
Sure I actually never ran my Exec in any other mode than the Corporate mode, so I never even experienced the other modes.
jah said:
@ChristopherTD, I setup a dummy Activesync server and then set Activesync to manual and I have found this make my Exec more stable - perhaps it is because it does not lose as much RAM as before.
Click to expand...
Click to collapse
Pitty, that's not the issue with my machine as I already did that trick 2 weeks ago.
I just ran memaid to see what running processes do I have and I see to be having the following ones. Note that I have no running programs in the background and no today plugins enabled whasoever, just VoiceCommand I guess is working in the background but that's it. It seems to me that the WM5 core doesn't freeup memory.
Here's what memaid reports
gwes.exe 5.26MB
device.exe 2.83MB
filesys.exe 2.41MB
cprog.exe 2.29MB
VoiceCmd.exe 1.81MB
shell32.exe 1.51MB
(smaller processes below
tmail.exe 275.57KB
services.exe 159.81KB
connmgr.exe 115.81KB
MemMaid.exe 27.90KB
psShutXP.exe 11.90KB
srvtrust.exe 7.90KB
Nk.exe 0 bytes
the most memory you can clear is about 26-29mbytes. The rest of the running processes need to be there. There is a good thread somewhere on what each process does, will post it if I come across it again.
29mb is disappointing considering there is 64mbyte memory, but thats the way WM5 works.
rgds
I've got a O2 XDA ii (himalaya) and im running wm2005 2.01.64
After a soft reset I have 31.x MB or RAM left, even if I dont run a single program or make a single phone call within say 6hours my RAM is at 21-24MB. This has nothing to do with not correctly closing programs but either a wm2005 leak or in my case a lot of the problem is being pointed at SBSH Ilauncher.
Well here is a comparison just done a soft reset started memaid and my results are in brackets after yours for the ones in common running :-
gwes.exe 5.26MB ( 4.6 MB )
device.exe 2.83MB ( 1.46 MB )
filesys.exe 2.41MB (1.82 MB )
cprog.exe 2.29MB ( 1.46 MB )
VoiceCmd.exe 1.81MB
shell32.exe 1.51MB ( 1.21 MB )
(smaller processes below
tmail.exe 275.57KB
services.exe 159.81KB ( 315.76 kb )
connmgr.exe 115.81KB ( 115.81 kb )
MemMaid.exe 27.90KB (23.0 kb )
psShutXP.exe 11.90KB
srvtrust.exe 7.90KB (7.9 kb )
Nk.exe 0 bytes ( 0kb )
also I have :-
Wisbaradv2.exe 787.71 kb
sddaemon.exe 67.9 kb
Pimhelper.exe 11.9 kb
Poutlook,exe 3.9 kb
( i have Wisbar, SPBdiary and pocketzenphone open )
going to have a look later tonight to see if anything changes.
ROM Ver. 1.30.76
Radio 1.09.00
ExtRom ver 1.30.164
I had similar problems when I first bought my O2 exec (on Ebay).
I downloaded the latest update from O2 website and re-flash the phone. I used Corporate install. So far it has been solid and I am even using the phone with Goodlink without a problem.
About the same time I bought the phone, I bought a 2G SD card (sandisk) , when I got the card I insalled a few software on this card (TCMP and Total Commander). Everytime I ran those applications, I can see that the phone crawls like a snail and worse it hangs. It even take a long time for me to transfer files from my laptop to the SD card even when I used a SD Card reader.
I replaced the SD card with a 2G MMC+ (Kingston) and I install the same apps. My phone is working as it should be, I can say that I didnt experience any hanging at all and it was never slow as well. I can even upload a ripped DVD movie on the phone faster compared to when I used the SD card. Right now I have one full season of Alias in my MMC+ card.
I have the phone setup to turnoff after a period of time (3 minutes) when there is no activity as opposed to others that they wanted to have the settings uncheck Start>Settings>Power. I also make sure that the backlight is set to a minimun when on battery and I uncheck the part where the phone will not recieve all incoming beam.
So far, my phone has been stable and battery lasts for 3 days.
From personal experience I found wisbar caused issues with the phone not ringing on an incoming call. It would ring for the first call after a soft reset and then stop for any further calls...
The other major issue which could cause delays and slowness is installing to the sd card any apps which ought to be installed to ram. ie: today plugins etc.

JASJAR Slow wakeup and dialing

Hay,
I'm using i-mate jasjar, and since day 1 (bought it sep 2005) i've had the problem of slow wakeup and generally slow response. I've run suggested apps such as pocket mechanic etc to remove duplicate wake-up hooks etc, with only slight effect. I've tried several ROMs, none better than the other... I have no extra software installed (i don't want to make it slower than it already is!)
*From i hit a button till the device is (awake) accepting commands takes 10-20 secs...
*From someone starts ringing till my phone is awake enough to start ringing takes 8-10 seconds. clicking the answer button takes another 5+ seconds.
*Dialing is slow (pressing numbers), i suspect it's the DTMF .wav files that take time to load. If i dial too fast, the order of keys pressed are messed up! (say i dial 1-2-3-4, phone takes 4-5 seconds to react, then types 1-2-4-3)
*When i have the usb on, and screen is on, from i click start button, it takes 5-10 seconds before it's displayed. I've tracked this down to a problem reading the icons of certain programs.. any fix for this?
I'm using rom 1.30.76(ext .164), radio 1.09.
This is the latest i-mate rom.
Is my device faulty or is this normal behaviour? Should i try another ROM? Is there any unbranded *good* ROMs out there?
please help,
Michael
VERY abnormal! I had same issue. Solved it here:
http://forum.xda-developers.com/showthread.php?t=281735
Hope it's the same thing for you. If not, work HARD on ID'ign what's on the SD card - and do my test I descroibe with the SD card removed - I bet you see an immediate improvmeent.
Try this
"HKEY_LOCAL_MACHINE\System\StorageManager\FATFS\"
Change "CacheSize" value from "0" naar "4096".
"HKEY_LOCAL_MACHINE\System\StorageManager\FATFS\CacheSize=0x1000(4096)"
Change "EnableCache" value to "1"
"HKEY_LOCAL_MACHINE\System\StorageManager\Filters\fsreplxfilt\"
Change "ReplStoreCacheSize" value to "4096"
disable the 3D phone skin and use the default one it dont has the feature where when typing in a number thats already in the phone book will show . it also looks flat . but its fast .check wiki registry hacks for it . if that dont work install the latest o2 rom with out o2 crap apps then get sktools use sktools and config divise to proformance. trust me it will make your divice fast as wip.
faster than all cooked roms on here
Hi again,
cragiecragie4, I tried removing SD card, no improvement whatsoever on speed.
niketkumar, I tried the cache registry changes, no improvements.
tattootroy, I've run several performance optimizing programs but none make it for the better. What makes this app different?
I still suspect my device may be faulty or bugged, since my friend's device appears faster...
The old I-mate rom was alot faster than the current one, but i don't want to downgrade radio and functionality etc...
Any ROM suggestions?
I'm using the ROM covered here - seems good.
http://forum.xda-developers.com/showthread.php?t=279258&page=1
Done a LOT of installation and work after basic re-flash, but overall I havn't found any bugs at all (despite what others complain about). Sorry, except that the .NET CF2.0 is badly installed.
Did you run my test? Remember that if you remove SD it will still be slow once, then fast thereafter. Did you work thro it properly. I SOOO had your symptoms, and was so pissed with the whole thing I was about to reflash - then I found that this was definitely the issue.
bheam said:
niketkumar, I tried the cache registry changes, no improvements.
Click to expand...
Click to collapse
Did u waited for 10 secs and after dat did the soft reset if not try again .
hi, i had the same pb. i didn't find any solution on french forums and as i suspected my radio upgrade (from 1.09 to 1.13) and my downgrade to 1.13: i decided to hard reset and re install every app on my qtek 9000. Since then it works perfectly. hope it will help...
for info, i got version rom 1.30.97 FRE radio 1.13.00 and extROM 1.30.186 FRE

[Q] Phone restarting and freezing

Hey guys,
I have had this 7.5 build for a while now and everything seemed fine to begin with. But now, within the last 3months or so, when ever I try to make a call, either 1) the phone freezes 2)the phone restarts itself straight away or 3)the call starts but I cant hear anything or see on the screen so I have to restart.
The battery also doesnt last more than 7-8 hours?! with all data settings, wifi, 3G off, brightness at the lowest, battery saver onand I even turn my phone off in the underground!
As a result I have to charge my phone to at least 60%-70% by 11pm otherwise my alarm work go off for work in the morning!
I am using the same radio version that came with the ROM, here are the details:
HTC schubert 7.5 build (os version 7.10.7740.16)
Radio software: 5.71.09.02a_22.51.50.21U
Radio hardware version: A.102.0.D4
Firmware revision: 2250.09.07491.605
Hardware revision: 0002
I have seen some questions about the various combinations of radio and builds? but I am wondering why it freezes still Is it a problem with the phone internals more than software maybe?
Thanks for your help,
Marc
freeze, restarts and speed problems is related to incompatible sdcard
for better battery time you must use radio combination 2.15/5.51 or 2.12/5.51 with camera trick (you have 5.71... this is battery draining radio)
all this explained countless times on forum

Categories

Resources