Bluetooth light always on - MDA II, XDA II, 2060 General

I have a problem with bluetooth the light is always stay blue not flashing and it say when i try to activate bluetooth (There is no bluetooth hardware installed on this device.)
All the rest is okay.
I don't understand what is wrong. I do a hard reset, soft reset , reinstall rom no result.
Anyone have this problem, idea....
Thanks.

sounds faulty to me ... the blue lite should be flashing when on. so you're trying to say that when u on the bluetooth; 'on' or 'discoverable', the lite just stayed on and not flashing?
send it to the 'check-up' center ... hope its on warranty ...

Related

help me pls...

my o2 mini sometimes is searching. why? help me pls...
what do you mean by searching? searching for what? signal or bt devices?
bluetooth problem!
my o2 mini bluetooth, "there is no bluetooth hardware installed in this device" now i can't use my bluetooth. why? help me... plz...
maybe a soft reset may help. i think it is a common problem with Magicians. Sometimes it is because of a software you may have installed. Try doing a soft reset and restarting your bluetooth.
help
softreset is not change anything. i still can't use my bluetooth. i never installed any software. is hardware broken?
i am not sure since i get the same error and i have a lot installed. have you tried a hard reset? (to do this: stylus in soft reset button while pressing power button until screen fades, wait a few seconds then soft reset your device)
StartUp
How many startup applications do you have Bro?
Check in
\Windows\StartUp
folder.
Remove unnecessary ones.
I've the same problem with a french ROM. There is a message that told "no bluetooth hardware on this device" but at sometimes il works for a limited time.
I've this problem only under 1.06 ROM not with 1.03.
I need help to resolve this. Soft reset and hard reset change nothing as reflashing with 1.06
Help needing :?

Bricked Hermes (SPV M3100) while flashing SPL - any help or sugestion are wellcomed

All started with trying to upgrade(rewrite) the GSM part because the Hermes had problems with phone part - when trying to call - the phone stop responding, bus the pda part sill worked.
So - I tried and tried and tried again, reading many threads about HARD SPL,Flashing radio, etc. Nothing worked..
In the end "i managed" to kill GSM - phone had "No Gsm" on boot-up.
From there i tried to downgrade SPL to 1.04 so that i try to "raw" rewrite the GSM part.
But something went terribly wrong, and while downgrading SPL, the phone suddently shutdown and never opened again.
Now i have the folowing situation: NO BOOTLOADER, no usb conectivity, nothing
This means that i cannot connect via USB whatever i try.
Is there any hope for me? or is it TOTALLY BRICKED?
Any help is apreciated!! I can even dismantle the mobile if there is any way to flash it via some kind of jtag connection...anything ...
The folks at www.imei-check.com can do the JTAG flashing. Just email them. It would be costly for you to do it yourself...
Are you saying that the phone won't turn on at all or that it does but you can't get a bootloader screen?
Have you tried taking the battery out for a while? Have you tried flashing an OEM rom and radio compatible with your device off an SD card?
All of this info is in the wiki, as are OEM roms you can flash.
Let us know how you get on.
Good luck.
WB
Try this:
1.) Remove battery
2.) Connect Hermes to charger or USB
3.) Insert the battery while Hermes is connected to charger
4.) Red light should turn Amber
5.) Soft Reset
@wacky.banana: The phone is totaly dead: no bootloader, doesn't boot at all, doesn't seem to have any USB conectivity at all. Flashing from micro sd doesn't work : probably because the bootloader isn't working.
@drummer10630: i'll check with imei-chek about jtag flashing, especially the price and shiping costs.thanks
@markafreeman: I tried, but when i put the battery in, the red light goes off, not to amber . no soft or hard reset helps. not even leaving the battery out for 2 weeks - i had tried that too . thanks anyway.
Anything else I can try? - phone totaly dead, no bootloder, no usb conectivity - cannot use mtty, cannot flash from microsd
I had to get a replacement device at that point when it happened to me.
Maybe someone else know a way to get it working.
Good luck.
get onto orange
tell them you dropped the phone
and it crashed and wouldnt turn on
so you managed to hard reset it
and it crashed an ****ed up
they'll replace it
well they will send it to HTC
who just replace the handset rather than repair it
Hi dancameo2k , maybe you will not remember but plz:
I ve bought recenty an spv m3100, im effortless trying to flash the rom to an wm6 version.
Like you ive started with the hardsppl flash thing to prevent bricking it and prior to sd flashing... and im not sure if its workin...
plz can you explain in detail how did you bricked it??? thx!!!!
the rom you used to flash was an american version or european one???

Elf turns off when you turn the screen off. Any thoughts before I take back my Elf?

As the title says, I have an Elf & when you press the power button (which is meant to turn the screen on and off) it shuts the device off instantly.
I first tried doing a hard reset
Then I tried another rom, to see if it was to do with the OS
& then I tried two other roms.
Ive still got the same problem.
Thinking of taking it back to the place I got it.
Anyone got any thoughts on any solution before I take it back?
Im thinking its a hardware problem that I cant really solve.
which spl are you using? I had a similar prob when i upgraded my rom to 6.1, but aftr using 3.07 spl, problems were gone..
I was using 3.07, but it doesnt matter now.
I took it back to the shop (with all accessories etc) and they replaced it for me. I feel bad about hastling them.
I took them an Elf, but apparently they have given me a Elfin, but on their system, they both just come up as p3450
But it works! thats the main thing.
and its gold and shiny.
Maybe somebody know how to solve this problem without turn elf back to the shop?)
I have same problem but haven't a chance to turn it back) 3.07 spl also
I had exactly this problem before I knew I have an Elfin.
I flashed Elf Roms on my Elfin, that caused the problem.
It boots regularly, but it will do a soft reset every X
minutes. Then I flashed an Elfin Rom and everything
works fine ^^
Maybe I'm wrong, but i think its Elf. It has 64Ram & 128 Flash, or they may not correctly view after flash or i dont understand differences?
It boots regulary every X minutes because it goes to sleepeng mode if device is not using. If this option off, it will not boot by its own, only if i press power button(

(htc elfin) reseting problem

hello,i got a big problem when i turn my htc it turns on and is alright for the moment, but after when i try to turn wifi on or audio manager it hang on and next turn of or i need to do soft reset,sometimes it vibrate and turns of after when everything load up,please help me solving this problem.
ms2405 said:
hello,i got a big problem when i turn my htc it turns on and is alright for the moment, but after when i try to turn wifi on or audio manager it hang on and next turn of or i need to do soft reset,sometimes it vibrate and turns of after when everything load up,please help me solving this problem.
Click to expand...
Click to collapse
I would have probably just done a hard reset to see if that solved the problem. This would be too annoying for me to handle and I wouldn't want to put up with that. I don't know what apps you have installed but perhaps you have something trying to launch at the same time when you turn WIFI on or Audio Manager - Strange that it happens for both of these. Perhaps you have apps trying to obtain updates or trying to connect to internet automatically once you turn WIFI on and this is causing your system to become too slow and unresponsive as it is trying to do too much at once. (doesn't explain audio manager I know) - I havn't experienced this problem myself thankfully -
now when i try to turn it on it needs few times just to boot up but when it boot up it is just hanging up after few seconds or minutes i have done few soft reset and hard reset and it doesn't help i don't know what to do.
That sounds buggered to be honest. Seems like a hardware error. I've dropped mine from about 50ft before, but it was grass. So I don't know how it really affects it. You say it vibrates when you try to turn it on?
Well, first thing I'd try is taking the battery out, then a hard reset. From then on, flash a different ROM and hard reset again after.
but i don't know how to flash the rom can you send me a link to instructions coz i am new on this forum,already i founded from the opal one,but i can't find a instruction under,can you help me.
ms2405 said:
but i don't know how to flash the rom can you send me a link to instructions coz i am new on this forum,already i founded from the opal one,but i can't find a instruction under,can you help me.
Click to expand...
Click to collapse
http://wiki.xda-developers.com/
Start reading through the WIKI to learn about flashing ROM
Do not flash OPAL Rom to Elfin - ROMS are device specific ELFIN ROM for ELFIN Device

Ipaq 614c wifi missing

Hello all.
I have problem with WIFI.
When I look into SETTINGS/CONNECTIONS/WIRELESS MANAGER, I´m missing WIFI there => Only Bluetooth and Phone is shown.
I try reflash radio (0.89), original ROM, some ROMs from KEYX but nothing happened
After reset to factory settings still nothing.
Could you please help me with this?
Thanks in advance
This should correct the missing WiFi issue: http://forum.xda-developers.com/showpost.php?p=3791117&postcount=191
Hi Kiemlo
Unfortunately the key is 1 already
I try change key to 0 but results is wifi missing still
Any idea ?
Thx
what happened to cause it to be missing?
did you flash the phone witha new ROM? install a program recently?
Have yuo tried doing a FULL backup then a hard reset?
Yes I think that wifi just disappear after some ROM flashing.
But I try to flash all ROMs which I have before and WIFI not appear again in no one ROM.
I try hard reset without backup(by the menu factory reset and by voice comm+power+reset) with same result - wifi missing.
Hi,
My current rom removes wifi from the list when its connected to usb or activesync. When I unplug it automatically goes back to the state it was before, either powered off or on_and_connected!
Also, use radio rom 0.89, with 0.88 and 6.5 i had no wifi, it was present in the list but could not see any SSID's.
Cheers,
Balint
Yes I know wifi can´t activate (grey text) when its plugged to USB.
But in my case don´t matter if its plugged or unplugged - WIFI option is missing(not only with grey text)
radio is 0.89 and OS is 6.5 so there is something else broken
Not that this would help much, but I had a similar issue with my 914c while using HP's default OEM 6.1 software. The Wi-Fi used to vanish from the Comm. Manager every so often. For what it's worth, a couple of soft-resets would fix the problem sooner or later (for me, anyway). I'm using Montecristo's 6.5 now and haven't had the problem since.
Yea friend soft resets - I did it thousand-times, even hard resets 1000x not help...
bluejay23 said:
Yea friend soft resets - I did it thousand-times, even hard resets 1000x not help...
Click to expand...
Click to collapse
I usually run into the same problem after ROM updates. Switch it off, remove the battery for a minute, insert the battery back in and hard reset fixes it always.
Regards
Flash original ROM with downgrading radio to 0.88
Sergious: unfortunately - this wouldn´t help.
even if yes, I can´t stand original ROM
I´m going to try Montecristo ROM
Best regards
Not working WiFi is a radio problem, not ROM. Link that i gave will downgrade your radio to 0.88, then you can flash any rom
PS. Montecristo ROM ?? It is for 914...
oh I miss that so next flashing will be with keyx roms still
I will try some flash and resets by the night ...
what goes around comes around
Hello everyone who can helps with me
I have some more informations.
After flash original HP ROM phone always show message problem with DEVICE.EXE until I disable sending report.
When i flash some KEYX 6,5 ROM this message doesn´t appear but when I look onto task manager DEVICE.EXE is mostly of the time under 90% of CPU.
With this battery is drain too quickly too.
This is may be the bad trick :/
Somebody knows it ?
THX
p.s. wifi still missing
bluejay23 said:
Hello all.
I have problem with WIFI.
When I look into SETTINGS/CONNECTIONS/WIRELESS MANAGER, I´m missing WIFI there => Only Bluetooth and Phone is shown.
I try reflash radio (0.89), original ROM, some ROMs from KEYX but nothing happened
After reset to factory settings still nothing.
Could you please help me with this?
Thanks in advance
Click to expand...
Click to collapse
I had the same problem with 23001 Beta 13.2 WWE, the WiFi was initially disappear from my Wireless Manager, then i change this : my network card connects to - The Internet (default is work), and the WiFi is now again show in Wireless Manager, but can not switch on, so after soft reset it works ok...
Zemun_PFC : thanks you for your advice - its so close to solve my issue.
I did what you say and
1) after soft restart BLUE LED blinking(means some wireless active - BT was off before restart so I suggest WIFI will be working) BUT
2) when i go to SETTINGS/CONNECTIONS/COMM MANNAGER and click on wifi -> waiting icon then nothing happened - STILL only TURN ON - BUT SHOULD BE ON already => so on/off trigger doesnt work
3!!) when I´m in COMM MANAGER and click on SETTINGS in bottom right corner I see WIRELESS LAN - this not happened before!!
4 when I´m click on it it show only BLUETOOTH and PHONE settings :/
You helped me a few with it
I must solve it
bluejay23 said:
Hello everyone who can helps with me
I have some more informations.
After flash original HP ROM phone always show message problem with DEVICE.EXE until I disable sending report.
When i flash some KEYX 6,5 ROM this message doesn´t appear but when I look onto task manager DEVICE.EXE is mostly of the time under 90% of CPU.
With this battery is drain too quickly too.
This is may be the bad trick :/
Somebody knows it ?
THX
p.s. wifi still missing
Click to expand...
Click to collapse
some of my roms (older version) had a issue when you use a2dp and turn off bt. Restart then device.exe will take most of the cpu
Keyx : yes you are right - I flash another one from you, now is device.exe issue cleared.

Categories

Resources