Can U guys outhere tell me if its possible to use Nokia Pen to send notes to XDA2 (Qtek 2020 in Portugal) ?
I can't seem to pair it, even with BTtools.... :?
(Portuguese do it better 8) )
From the Nokia Website link at:
http://www.nokia.com/nokia/0,4879,5806,00.html#2
It states:
"1. What phones are compatible with Nokia Digital Pen?
The Nokia 7650, Nokia 3650, and Nokia 6650 mobile phones, among others. Compatible phones must support the Bluetooth specification 1.1 and the necessary Bluetooth profiles.
2. What Bluetooth profiles does the Nokia Digital Pen support?
The Nokia Digital Pen supports the Generic Access Profile (GAP), Serial Port Profile (SPP), Dial-up Networking (DUN), Generic Object Exchange Profile (GOEP), and Object Push Profile (OPP).[/b]
3. What Bluetooth profiles must a phone have in order for it to be compatible with the Nokia Digital Pen?
OPP and DUN, along with the other mandatory Bluetooth profiles.
4. What do I need to do to use the Nokia Digital Pen with a compatible phone?
You need to pair the Nokia Digital Pen with the phone, using the Bluetooth pin code provided in the sales package.
5. Do I need to install any application on my phone in order to be able to use the Nokia Digital Pen?
No, you don't.
6. Can Nokia Digital Pen be used with organizers?
The Nokia Digital Pen can be used with organizers that are compatible for use with digital paper. However, such use requires software that is not included in the sales package of the Nokia Digital Pen."
So having regard to all that, I'd say far too many things rule it out. Certainly the Profiles needed are not available on the XDA...
Related
Exclamation Arrow Broadcom Corporation announced the Widcomm BTW 4.0, a new release of its Bluetooth software, with enhanced security and adding advanced audio/video (A/V) capabilities to the industry's most widely adopted Bluetooth software. The new software was tested and qualified for native support and seamless operation with Mcft's recently announced Service Pack 2 upgrade for the Windows XP operating system (Windows XP SP2).
Wireless, high quality stereo audio headsets and speakers enabled by the new WIDCOMM BTW (Bluetooth for Windows) 4.0 software is a new application expected to drive widespread Bluetooth adoption for consumers over the coming years. A/V enhancements built into BTW 4.0 software will bring a new level of audio quality to wireless headsets, enabling a generation of products capable of delivering CD-like stereo sound without the need for wires. The same A/V Bluetooth profile support can be expected to appear in upcoming consumer electronics products like MP3 players, cellular phones, PDAs, and other appliances.
The company sees wireless headsets or speakers enabled with this technology streaming high quality sound while also performing remote control functions such as pausing or stopping play, and selecting tracks. In addition, consumers can utilise wireless speakers, enabling enhanced sound and audio distribution for DVD and CD playback.
Broadcom's WIDCOMM BTW 4.0 incorporates the latest software "profiles," which ensure a common set of features between two Bluetooth devices. Bluetooth profiles are developed and standardized through the Bluetooth Special Interest Group (SIG). BTW 4.0 features many of the latest profiles, which provide advanced multimedia capabilities including:
GAVDP -- Generic Audio Video Distribution Profile
A2DP -- Advanced Audio Distribution Profile
AVRCP -- Audio Video Remote Control Profile
BTW 4.0 also supports the Basic Imaging Profile, which provides the ability to "push" and "pull" images wirelessly between a mobile phone or digital camera and a PC.
"BTW 4.0 answers two distinct needs in the Bluetooth space: enhanced security, and the ability to effectively stream high-quality audio to wireless headphones or speakers. It is changing the dynamics of how consumers will experience multimedia content on their PCs," said Ron Wong, Senior Product Line Manager for Broadcom's Bluetooth software products. "Broadcom's unique ability to design and deliver all the critical technology pieces for next-generation wireless electronic devices enables our partners to bring products to market quickly and with features that hold great appeal for consumer markets."
PC OEMs are already shipping Bluetooth in a large number of their commercial notebook PCs and are expecting continuous growth and accelerated adoption into 2005. With this rapid adoption, large enterprises have expressed growing concerns over security and software virus spreads. The new WIDCOMM BTW4.0 software incorporates enhanced security capability to help address these concerns
The software is currently shipping to Broadcom's early access partners...and is available free of charge to all members exclusively
Download:
http://my.so-net.net.tw/dean8888/Widcomm_BTW 4.0.1.700.rar
Thank soneone upload
thanks for sharing...
a question for ya... have ya tried the software yourself? is it work good with no problems?
i tried it and installed fine but now my bluetooth isn't working when i try to start the BT i get this error "Your Bluetooth Software License doesn't include use with this bluetooth device. [6] and i have a billionton 100m bluetooth dongle
Somehow I'm doubtful that this really will do waht I'm looking for, has anybody tried it to get audio sent from the unit to their BT headset with this software?
BT 4.0 "patch"
You also need the attached to get the Widcom to work. Follow instructions in #2 folder.
I've got the same problem
What ya mean with folder #2 ??
Edit Aaah now theres a file
thanks man.. all working now..
Sorry forgot patch
after installing the Widcomm 4.0.1.700 software i can't set my computer as a handsfree device on my O2 mini (the voice gateway seems not to work too)...
both of them used to work.
anyone else has this problem? :?
BTW: how can i transfer files throw this bt software to my mini?
everytime i choose filetransfer it says the device doesnt support it.
even with MICROSOFT drivers i managed to send files to the device :shock:
Knot said:
Sorry forgot patch
Click to expand...
Click to collapse
Where Can I get the patch I have downloaded the rar file you have posted but do not see #2 Folder ??? PLease help
It works on XDAII,.. I am making a how to post now. The experts say it is from an XDAII and for an XDAII.. But who knows!!! Try it. :shock:
Churchill said:
Knot said:
Sorry forgot patch
Click to expand...
Click to collapse
Where Can I get the patch I have downloaded the rar file you have posted but do not see #2 Folder ??? PLease help
Click to expand...
Click to collapse
http://forum.xda-developers.com/download.php?id=3550
Sorry for a stupid question, but this bluetooth software is for the Magician or for the Windows XP?
718 said:
Sorry for a stupid question, but this bluetooth software is for the Magician or for the Windows XP?
Click to expand...
Click to collapse
It's for Window PC
I replaced the files from your .rar dewild1 but i get the same message when i'm trying to "start using bluetooth" : " Your bluetooth software license does not include use with this Bluetooth device". Is something that i can do to make them work? I had the "rom version 2.06.00WWE" and the "radio version 1.18.00" and i can't syncronize my xda to activesync via bluetooth, and i hoped that this driver will help me.
can this be done?
my magician detect the intelli mouse, but can do nothing with it...
cant also use the "stowaway think outside mouse" drivers since they detect only the Stowaway mouse... also couldnt use the IFrog Bluetooth keyboard drivers, even though they support HID detection...
can someone know how to connect between these two?
any news on that... i´m trying to use intellimouse explorer, too... no luck...
someone out there to patch the Thinkoutside drivers ?
I saw somebody saying that the widdcom BT stack supported the mouse...
I dont know if its true, but to find out id have to intstall a new OS (im on 2005) and hack around with BT stacks...
Id rather just hear from somebody running the 2.02/2.06 sin merged rom with the widdcom stack to see if it works. But i guess there isnt anybody with that combination and a BT mouse too.
Magician only...
i ment it to work on the magician.
do you have a magician?
I have a german magician,
neither ms bt mous nor ms bt keyb works!
maybe we should state out that bluetooth firstly only specifies the way how information is being transferred: via radio in a certain frequency - nothing else!
It does NOT determine the way how the transferred information is being interpreted. Lets say when you connect your monitor to the vga connector it is already clear what signals are transferred and how they are read out to compose the picture on the screen.
In other cases (e.g. tracking the mouse movements) we must specify before any exchange of data how is will be interpreted. This is done in so called protocols also known as 'profiles' when you speak of protocols in connection with bluetooth devices.
This means that a bt mouse will be detected (this is standardized) but your device will not know how to interpret the data which is being sent from your mouse unless it supports the matching profile (should be 'HID' - Human Interface Device protocol in this case).
The hardware support of the bt hardware itself plus the additional profiles is called a 'stack'. On Magician you will find the original Microsoft BT stack which lacks of many profiles. It has turned out that other stacks like the one from Toshiba or Widcomm also work (more or less) on Magician. Maybe these ones support your hardware. Let me advise you that there are still many issues with alien stacks so dont install these unless your absolutely sure what youre doing!
Hope that i could make things a little bit clearer for you.
regards,
Quappo
Great!
Could we pin this post within the board so it stays on top or - maybe the better solution - could we publish it in the wiki? I guess that's the best newbie explanation of bluetooth I ever read... 8)
Great post, quapo! 8)
Still no HID driver for PPC
Great Answer!!!! ;-)
OK, i knew all that.
still no answer...:-(
Forgive me folks... I've been reading posts and most of em assume some geekiness beyond my knowledge of cellular phones. I'm a wannabe, no expereince with cellular phones... Upset me to find out that my Nokia 6682 could not bluetooth music.. My intentions are for the Nokia to be my mobile one piece, juebox, phone n camera. Took a week to discover cingular "flashes" my phone to disable some of the phones capabililty. I want to use the phone via car kit as a automobile juke box - tied to my 8 spkr., GM in car stereo. I'd like it to also be compatible with bluetooth stereo headsets for mobile outdoor expereinces.. CAN'T! A2DP IS DISABLED for starters :x ... What should I do? Unlock the phone or find a way to simply enable A2DP or any other bluetooth profiles needed (are the other modifications needed)? [Help!] :roll: [/b]
what the ****?
Why don't you post on a Nokia forum :?
This is a PPC forum... not a forum for those silly toy phones known as Nokias.
You are on the wrong forum. I assume you are using symbian or the stock nokia system.
Did you notice "XDA" in the link
Can anyone tell me if there is a technical reason Bluetooth SAP/rSAP cannot be delivered on the Windows Phone 7 platform, or are the just being lazy about delivering it??
So... no reply cause nobody knows or no reply cause I'm being a n00b and this is answered elsewhere? Or something worse?
http://lmgtfy.com/?q=rsap+windows+phone+7
Just follow the first link "Frage zu SAP..." (german)
So far only these BT profiles are implemented:
PBAP — Phone Book Access Profile
A2DP — Advanced Audio Distribution Profile
HSP — Headset Profile
HFP — Hands-Free Profile
AVRCP — A/V Remote Control Profile
Anything else would be speculation, because Mango BT updates known so far:
http://wmpoweruser.com/windows-phone-mango-bluetooth-stack-updated-but-not-much/
esackbauer said:
http://lmgtfy.com/?q=rsap+windows+phone+7
Just follow the first link "Frage zu SAP..." (german)
So far only these BT profiles are implemented:
PBAP — Phone Book Access Profile
A2DP — Advanced Audio Distribution Profile
HSP — Headset Profile
HFP — Hands-Free Profile
AVRCP — A/V Remote Control Profile
Anything else would be speculation, because Mango BT updates known so far:
http://wmpoweruser.com/windows-phone-mango-bluetooth-stack-updated-but-not-much/
Click to expand...
Click to collapse
Thanks - just saw that qualified listing and was a little disappointed. I checked the one for Apple iOS (listed as software version 4.1 and 4.2) and it also doesn't mention SAP or rSAP, but I know it does support those profiles, so I'm wondering whether I am just reading it wrong.
The differences are that iOS has:
RFCOMM
Bluetooth Network Encapsulation Protocol
Personal Area Networking Profile
HID
Interop Test Spec
Which one of these is linked to SAP/rSAP?
How do you "know" that iPhone supports rSAP? It does not, not even 4.3:
http://iamtim.de/2011/05/das-iphone-und-das-sim-access-profil-sap-oder-rsap/
None of these profiles you listed is rSAP (or SAP, SIM), as written here:
http://en.wikipedia.org/wiki/Bluetooth_profile#SIM_Access_Profile_.28SAP.2C_SIM.2C_rSAP.29
esackbauer said:
How do you "know" that iPhone supports rSAP? It does not, not even 4.3:
http://iamtim.de/2011/05/das-iphone-und-das-sim-access-profil-sap-oder-rsap/
None of these profiles you listed is rSAP (or SAP, SIM), as written here:
http://en.wikipedia.org/wiki/Bluetooth_profile#SIM_Access_Profile_.28SAP.2C_SIM.2C_rSAP.29
Click to expand...
Click to collapse
Well I suppose to be clear I don't "know", I just "think". The reason I "think" is because it communicates with my car, that says it "requires" SIM Access Profile, whereas my phone REFUSES to communicate with my car.
Additional detail: the car actually supports 2 bluetooth "modes": Headphone mode and SIM Access mode. If I have the car initiate the bluetooth connection it will use the remote SIM mode, and if the phone initiates the connection it will use the "headphones" mode.
A Nokia N97 works in both directions. As does the iPhone 3 and 4. My Samsung Omnia 7 won't do either.
Maybe Mango will be a solution, because it updates the Headset and Hands-free profiles.
"New is Hand-Free Profile 1.5, which should mean better support for Bluetooth car kits. "
Also there comes PBA (Phonebook Access profile), which is basically the same as SAP, but it uses the radio of the phone, instead the radio inbuilt to the car kit.
PBA and your interpretation of it being very similar to SAP sounds quite interesting yet it will most likely not be recognized by SAP-only car-kits like the older VW premium handsfree-boxes. I for instance refrain from switching to any other OS than windows Mobile simply because i need my phone working with the car kit and i am not going to buy a new car because my phone doesnt support the current.
Well, anyhow. I was going to say, that if the PBA doesn't support some kinda fake-SAp mode (pretend to be sap or so) it will most likely not help anyone with sap-only car kits. not matter how much it is similar to sap.
sorry to say this.
Sneakyghost said:
I for instance refrain from switching to any other OS than windows Mobile simply because i need my phone working with the car kit and i am not going to buy a new car because my phone doesnt support the current.
Click to expand...
Click to collapse
While i have both versions of Windows OS and yes the 6.x suported rSAP, the new WP7 does not. If you want a new phone that supports rSAP then Android fills the bill. Microsoft really dropped the ball by not supporting rSAP. Like you, have a VW-based phone system and without rSAP support the current handsfree phone protocols in WP7 is basically worthless.
[Update]
Just updated my phone to Mango, and annoyingly neither the headphone mode or reomte SIM modes work. This is a deal-breaker for me.
While I was quite enjoying the phone I am now going to switch to a Galaxy SII which works reliably in both directions, and connects properly to my WiFi as well. A real shame, but I can't imagine another WP update will be coming too soon and I don't have any patience left.
esackbauer said:
Maybe Mango will be a solution, because it updates the Headset and Hands-free profiles.
"New is Hand-Free Profile 1.5, which should mean better support for Bluetooth car kits. "
Also there comes PBA (Phonebook Access profile), which is basically the same as SAP, but it uses the radio of the phone, instead the radio inbuilt to the car kit.
Click to expand...
Click to collapse
Since update my Omnia 7 to Mango, I get a lot of "BT connection error" on my display car.
all working here.
car radio is a Kenwood.
Finally now the phone transmits the name of the song playing to the headunit! like windows mobile.
Voice comands thru the Headunit work amazing too.The other day i received an sms while driving, voice comand told me that there was a new sms from Ken,then it ask me if i wanted it read out loud! I said yes and it did, at the end it ask me if i want it to reply to.
Also this is the only phone that actually auto connects to the car stereo,all my android devices need to be reconnected manually.
Funny thing all of this was set up by just pairing the device with the headunit.
Well my "head unit" is integrated into the dash - it's a Porsche touch screen system called PCM (which I think, lamely, stands for Porsche Control Module). I have anecdotal evidence that other WP7 models will connect which makes me think it may actually be the Samsung Omnia 7 itself and not WP7 per se.
What sux is that my Samsung Galaxy S2 works perfectly and my wife's iPhone4 works perfectly. So it isn't the car.
...I really haven't got the patience to wait for the Win8 update and keep using headphones for the next year!
some news here?
Does anyone know of any bluetooth heart rate monitors that they know for sure works with windows phone 8?
I know, for example, the lumia 920 has 4.0 hardware but wp8 does not support 4.0. I found this out the hardway by buying a polar H7 before doing any research
I have looked up various monitors such as the Polar H1 with bluetooth, which uses bluetooth 2.0, and every site I find says not supported by iphone or windows phone.
I also found a post on endomondo's web-site saying that they do not know of any devices compatable.