Related
it's highly possible that this topic i'm posting has been discussed before and i do apologize in advance for bringing it up. but i do need some tips...
i need advise on which bluetooth headset to buy. i'm presently using jabra but i'm starting to get annoyed with the bonding-rebonding issues. if you noticed; once you shut down the headset (for charging or otherwise) or the bluetooth profile in the xda you have to go through the process of rebonding. the same holds when you use activesync; the bonding is lost.
with that; i'm in the process of buying a new headset and i'm after one that doesn't have the rebonding issues; regardless if you turn it off or activesync or whatever. did some research and so far have come across the following headsets. anyone using any of them; could you please give me some feedback if these indeed work properly with the xda2 AND does not have any rebonding issues. the present rom upgrades doesn't seem to address this issue...not that i'm not ungrateful or anything ..
bluetrek
plantronics
sony-ericsson hbh
c-tech
02 headset
motorola
nokia
sorry; don't have the model numbers; any feedback would be appreciated and if you have other headsets in mind do let me know.
cheers mates
robson
Hi Robson,
I've had a Blutrek G2 BT headset for about 3 weeks now without any problems at all. I can't really compare it to any of the other headsets as it is the first one I have owned. The main reason I got it was the fact that it was very cheap (£38) and that its supposed to be the lightest headset you can buy. It looks pretty smart too!
As for battery life, I've charged it once since I'va had it (excluding initial out-of-box charge).
Thats my recommendation, mate
Oops, that price should have read £38.
hey munkee,
thanks, and to be honest i was considering bluetrek because it does indeed look smart. have a mate who can get one for me and i just needed some more info on it. did some web browsing and it looks to be tops. like i said i use jabra; quality is good but the bonding issue is starting to be a pain in the arse.
cheers then
robson
This is more FYI others.... when I started looking at new phones some times ago to intergrate in to my car system getting one that was able to do BT headset and com port at the same time was important - and in fact to my knowllage the IJam was the first.
Any way as it seems no ones broached the subject and at the time I would have killed for this info I'm please to say I have tried both my BT carkit and GPS with Tomtom at the same time and it works... I'm currious if I can get 3 concurent connections now
Any way - probably no biggy for most here - its just my was of helping any newbie that comes along searching for this info... like I did once.
Terran
Hi Terran,
Out of interest, which BT car kit have you got? I've got to replace two Nokia kits now we've got the 9100's. I've looked at the parrot kits, but am using voice commander and would like a kit that works as well as my Scala bt headset.
Regards
Dox
Dox said:
Hi Terran,
Out of interest, which BT car kit have you got? I've got to replace two Nokia kits now we've got the 9100's. I've looked at the parrot kits, but am using voice commander and would like a kit that works as well as my Scala bt headset.
Regards
Dox
Click to expand...
Click to collapse
The Parrot CK3000 - Had it since it came out and never looked back. Used to cost me ( cos no company even my current one which expects me to travel has ever give me a car kit ) a fortune before BT having to upgrade to specific kits... and they where a pain to install.
Parrot - Can't fault em - but my only tip is buy the upgrade cables... I've upgraded mine several times and it has helped depending on the issue.... for example..
I've not upgraded it this time how ever the other half found the quality of sound from me ( ie in the car ) better than with my T610...
Hope that helps - PS if you want GPS some of the higer models have it built in.
Terran
PPS Any one with a basic under standing of plug socket a in to socket b can do the install in about 10 mins or so.... the worst part is getting the radio out.
Thanks for the reply Terran.
My only concern (aside from the Parrot compatibility, which you've cleared) is that with two 6310i's, if my personal phone rang, I could ping the work one out of the kit and plug in my own within a couple of seconds. I can't find a way to disconnect the 9100 from my BT headset (which operated in hands-free mode too).I asked here, and after 70 views, there have been no replies... I don't know if there's a quick way on the Parrot kit, and if so, how fast I could "connect" the other handset, or, if I'd have to have two kits, one for each phone...
Dox
Dox said:
Thanks for the reply Terran.
My only concern (aside from the Parrot compatibility, which you've cleared) is that with two 6310i's, if my personal phone rang, I could ping the work one out of the kit and plug in my own within a couple of seconds. I can't find a way to disconnect the 9100 from my BT headset (which operated in hands-free mode too).I asked here, and after 70 views, there have been no replies... I don't know if there's a quick way on the Parrot kit, and if so, how fast I could "connect" the other handset, or, if I'd have to have two kits, one for each phone...
Dox
Click to expand...
Click to collapse
Never tried but my Parrots update is supposed to support up to 3 handsets... you can set which one gets priority...
I think they have a forum so may be its worth having a chat with em.
Terran
If you have a CK3000 then this thred ( especially post #20 ) is worth noting...
http://forum.xda-developers.com/viewtopic.php?t=31755
Dear Sir,
Thanks for visiting our forum.
Concerning your request, with the K750and W800 it's not possble to use the phone's voice recognition system
with the CK3000. This issue to the phone software and unfortunately only Sony Ericssson can make some improvments
on it.
However with the CK3000 evolution, you have the possibility to send contacts from the mobile phone to the car kit.
Thanks to this function, you can use the car kit voice recognition system and no more the phone voice recognition system : we are no more depend on the mobile phone. The knob of the evolution's remote control allows you to select this function by spoken menus. It's the same way like for the CK3100 however instead of a graphic indications you have voice prompts. This function was not possible with with the CK3000.
To change your CK3000 into a CK3000 evolution. You just need to change the car kit software and to change the buttons.
However the software update have to be done using a Parrot Serial cable or by Bluetooth using a Parrot Flash Kit.
That's why we ask to send us the unit.
If you have the buttons and a way to make the update , the transformation into a CK3000 evolution is possible.
However for technical reasons, please send us before an email to our technical support : [email protected] .
Some situations can cause bad issues and it will be wise to check with us if the transformation is possible.
Please note : Before to make the software update, please erase the car kit memory. You just need to press the green and red button of the car kit at the same time: you will hear MEMORY ERASING PLEASE WAIT and then your can release the buttons. Once you hear PLEASE PAIR DEVICE, the car kit is OK for the update.
Best Regards
-Adviser 2-
Click to expand...
Click to collapse
In other words if you have the flash kit ( which I do ) all you need to do is upgrade the buttons for £18 and flash the ROM and you have a new upto date Carkit...
Terran
I'm looking for a way to redirect my TomTom voice instructions from my MDA Vario through my Parrat CK3300 BT carkit sounding on my car-speakersystem by using the bluetooth stack. Now Parrot claims this isn't possible due to a phone limitation. I agree and think it's shortage of Microsoft WM5. Now I've looked up some info about Bluetooth Audio Distribution and found the following:
Advanced Audio Distribution Profile (A2DP)
AKU 2.0 for Windows Mobile 5.0 (for both, Smartphone and Pocket PC), which is expected to be released early next year (2006), will also includes support for the Bluetooth Advanced Audio Distribution Profile profile which is designed to transfer a stereo audio stream like music from the device to a headset or car radio.
A2DP is already implemented into the Samsung SGH-i300 Windows Mobile 2003 Second Edition Smartphone, however this isn't based on Microsoft's A2DP implementation but Samsung added it itself.
(Refer to http://www.theunwired.net/?itemid=2779 for more info concerning this subject.)
So if this article is based on true facts, it means that Microsoft will soon release a patch for all WM5 based devices, which enables them to receive all audio (e.g. TomTom voice instructions) through the bluetooth stack.
Somebody knows more about this subject and if it's true that after having AKU 2.0 installed, you can hear the navigation instructions through your carkit or headset?
Many thanks,
Youri Festen
there is a facility on this forum that will allow you to switch audio to and from the bluetooth, not high quality or stereo but standard quality.
There is ?
Been loking around in the threads for quite a while, but didn't find a replicatable solution...
Here you go
Tried all kind of files, but no go...
All i want is ALL audio over the Carkit (Supertooth2). That is TomTom + Phone.
I don't care if i have to trun of the carkit to return audio to the phone. But i don't want to have to reset or something.
I have a XDA (Himalaya) btw. Still with Rom 1.72 00WWE 15/03/2004 (Ext Rom 1.72.125)
Tried all these :
BA_OEM_AudioGW.CAB
BA_WM5_Voice_Dialer_2.cab
BCHS_FOR_POCKET_PC_OZONE[1].ARMV4.CAB
Broadcom Corporation BT-PPC AV.cab
Broadcom Stack + Switcher + Icon.zip
BroadcomCorp_BT1.0.0.3900.cab
BTAGExtModule-2.zip
btagextmodule.zip
btaudio.zip
MS-BT-107.ARMV4.CAB
SCO settings all BT.txt
voicedial2.rar
whoa it worked
i know im reaching here, but really wanted to try to stream to the new cingular 2125 (aka hct). downloaded and ran the app with my iphono steroe headphones (luv em), got intresting results.
it worked. ran the app, pushed the button on the headphones, got music. call came in, answered (with auto answer) talked, and on hangup it went back to music. however, if i ran another app on the phone such as voice tag in contacts to initiate a call, it brought in the call, but on hangup went back to the speaker. had to run the toggle on again to get headphones working, not elegant - always want more - but im a happy guy til a2dp comes out for mobile 5. thanks!
try looking at this
http://www.pdaphonehome.com/forums/showthread.php?threadid=54951&perpage=20&pagenumber=1
might be what you need
Scollinguk said:
try looking at this
http://www.pdaphonehome.com/forums/showthread.php?threadid=54951&perpage=20&pagenumber=1
might be what you need
Click to expand...
Click to collapse
Try reading and understanding what you read before posting. See the post of dalamario that is the BTAudio on/off tool !
Is this goingt to be anter shout and wild guesses about what file or tool should "really"work ?
I tried all so called "easy" fixes, hell, i've even got a whole dump of my registry, cut through all the BT + Audio and BT + Headset threads, here and on PDAPhonehome, Howardsforum, and the reduced-to-user-bla-bla on pocketPC-club.nl.
And still zilch.....
Ow, and don't think i'm someone who wants easy answers... Think again, i've been around quite a while on PPC forums and the lot....
What i do want/like is usefull answers ans clues on how this BT and Audio stuff works, beut even after reading some on MSDN i can't find a solution yet....
That's why i jumped in on this thread, i'm not going to reinvent the wheel if some allready has the solution: Tomtom and Phone audio over BT
So i'll stop writing now, and continiu searschin for a solution... There must be one...
Sorry mr high horse, wont bother trying to help next time just in case i might not be right, but then if everyone did that no one would answer anything.
The Wizard can do system Audio over bluetooth.
This has been proved with the easy hack that allows you to activiate voice dial using a BT headset.
http://forum.xda-developers.com/viewtopic.php?t=29837
MS Voice Command leaves the Audio Gateway open after initialising, whilst Voice Dialler closes it.
So maybe try installing Voice Command and doing the hack in the above referenced thread, and then see if you can launch Voice command from your car kit. This should leve the gateway open and allow all system sounds to stream to your BT kit until you hit the button again.
jpiek said:
Try reading and understanding what you read before posting.
Click to expand...
Click to collapse
Try keeping Himalaya talk in the Himalaya forum then. Posting questions about devices in the wrong forums just causes confusion.
Scollinguk said:
Sorry mr high horse, wont bother trying to help next time just in case i might not be right, but then if everyone did that no one would answer anything.
Click to expand...
Click to collapse
Not Mr High Horse, but didn't you look at what you where posting ? You should know it linked to the same file, right ? If not, you really would just be 'shouting' ...
It's just that i've been reading XXX threads, and just about everyone comes up with the same, useless, files... Like nowbody really knows how it works and waht should be done to make Audio over BT possible...
We here are all trying real hard for months now, you see....
Just a little patience. Test version of Qtek 9100 ROM with A2DP already exists. It works with I-Phono bt-stereo, for example. So I think it will be released by March.
[CpD said:
bob]Just a little patience. Test version of Qtek 9100 ROM with A2DP already exists. It works with I-Phono bt-stereo, for example. So I think it will be released by March.
Click to expand...
Click to collapse
where is it? i want it! i need it!
ready to test.
Can't share it.
[CpD said:
bob]Can't share it.
Click to expand...
Click to collapse
spoil sport
i won't tell anyone,
got motorola ht850 headphones.
have one question whilst here,
when i am on the underground the headset give a beep to tell me i have no network signal? you may not know the answer but would this over ride the bluetooth stereo signal?
p.s. send me your bank details for the transfer :wink:
[CpD said:
bob]Just a little patience. Test version of Qtek 9100 ROM with A2DP already exists. It works with I-Phono bt-stereo, for example. So I think it will be released by March.
Click to expand...
Click to collapse
Do you think that when it works with I-Phono, it will also offer us the navigation voice instructions through BT-headsets or carkits? Hope so!
Can't test it with car navigator.
if audio streaming is enabled, i would have thought you should be able to hear navigation commands.
i have used the bt audio switch that started this thread to hear tomtom commands through my headset, and it works fine.
saves me explaining to my 84 year old dad why yoda is giving me directions :lol:
aliendad said:
if audio streaming is enabled, i would have thought you should be able to hear navigation commands.
i have used the bt audio switch that started this thread to hear tomtom commands through my headset, and it works fine.
saves me explaining to my 84 year old dad why yoda is giving me directions :lol:
Click to expand...
Click to collapse
It's nice.... I'd really like Tomtom over my carkit... Ohh, the XDA was so much easyer just soldered a Ground and Left/Right channnel into my TomTom/Leadtec connector, and plugged it in to my JVC Front-in line...
I bought the Qtec 2020 because BT seemd so much easyer
Hi,
1) has anyone any first hand experience with ANY HTC pda/phone that could autoanswer on ANY bluetooth headset
1a) my experience is NO ! (Verizon XV-6600, A&T Tilt)
2) Unless there is a yes answer to 1)....
how could this have gone unaddressed thru so many generation/models/reviews of PDA/phones ?
2a) I can't accept that this is a "feature".
Jeez, just about every "dumb" bluetooth mobile phone does it just fine.
3) For the individual(s) that offer directions to ->Settings, etc...
it doesn't work for bluetooth
4) For those that say Handsfree profile is required...
AT&T Tilt supossedly has Handsfree 1.5, and bluetooth autoanswer doesn't work !
5) This is a serious flaw/oversight/disability/etc. !
How many versions/releases from Harrier to Kaiser, to have not corrected this.
Someone from HTC please step up and address this. Please ?!
did you try PhoneAlarm.
it is possible to create a profile in phonealarm, and automaticly respond to an incoming phone call..also while using bluetooth
First step, run SAPSettings to activate the comunication between SIM an BT
Then Settings -> phone -> more -> automatic pickup is working for me.
Hi,
Neither SAP nor "bluetooth SIM access" were referenced at http://www.america.htc.com/support/tilt/docs/ATT_Tilt_English_GSG.pdf
Thanx anyhow.
The Tilt was already returned and I've stayed with the XV-6600 (bigger screen, coverage footprint, faster broadband, cpu "feels" faster, software/accessories investment).
I will correlate your advice with the XV-6600.
I'd like autoanswer to work, but more importantly...
I strongly feel HTC should address/correct this in their production.
Regards,
Can anyone make it work on their HTC phone ?
Hi,
Pardon the redundancy.
Omitted headset models from original post.
With HTC so visible in the PDA/phone
market, how is it that...
1) they probably don't have a unit which
can perform AUTOANSWER via any(?)
bluetooth headset
Tested (Verizon) Audiovox XV-6600
(HTC Harrier with camera)
phones: (AT&T Tilt) HTC 8925 (Kaiser)
headsets: BlueVoice, iPhono[063C],
Jabra BT110, Jabra BT200,
Logitech HS02-V07
Mobile Freedom,
Logitech HS03 V04 Traveller,
Motorola HS810,
Motorola S9 "Rokr",
Nokia BH-800, Nokia BH-900,
Nokia HS-37W, Z-E-N
2) no(?) review has ever pointed this out
3) there are a number of generations
between the models I tested,
I don't think any intermediate models
(e.g. PPC-6700) could AUTOANSWER either
How, has HTC missed this so
consistently ?
AUTOANSWER:
an incoming call will cause a handsfree headset to automatically connect to the caller within a specified number of rings and/or seconds, without wearer intervention (i.e. no buttons to push, nothing to touch).
OK, if you've read this... just try to make it work on your HTC pda/phone with any bluetooth headset you choose.
AutoAnswer is a standard feature on just about every smart or dumb phone.
So, I'm just asking for someone/anyone to confirm that it works as designed on ANY HTC pda/phones for any ONE or more bluetooth headsets.
The Sprint Mogul (PPC-6800 ?) is reputed to have undergone recent firmware upgrades adressing specifically bluetooth and other issues.
Try it !
I'm curious.
IF you get it to work, please post an affirmation to this thread of which models phone/headset were involved.
Regards,
csdkw said:
Hi,
1) has anyone any first hand experience with ANY HTC pda/phone that could autoanswer on ANY bluetooth headset
Click to expand...
Click to collapse
Yes...my Att 8125 aka HTC wizard and my Att 8225 aka HTC Hermes...my advice to you...learn how to use the device....
ljinsane,
I've gotten the feature to work with Motorola & Jabra headsets on (AT&T/Cingular) Motorola V600 & Razor, Sony-Ericsson T62U + DBA-10 bluetooth adapter, and a Blackjack.
I'm pretty confident it's not operator error.
What headset did you use ?
Were you indeed able to converse with whomever called you, by just waiting for the headset to stop ringing, and without touching the headset and not touching the Wizard 8125 and/or Hermes 8225 ?
Regards,
, Er
csdkw said:
Hi,
1) has anyone any first hand experience with ANY HTC pda/phone that could autoanswer on ANY bluetooth headset
1a) my experience is NO ! (Verizon XV-6600, A&T Tilt)
2) Unless there is a yes answer to 1)....
how could this have gone unaddressed thru so many generation/models/reviews of PDA/phones ?
2a) I can't accept that this is a "feature".
Jeez, just about every "dumb" bluetooth mobile phone does it just fine.
3) For the individual(s) that offer directions to ->Settings, etc...
it doesn't work for bluetooth
4) For those that say Handsfree profile is required...
AT&T Tilt supossedly has Handsfree 1.5, and bluetooth autoanswer doesn't work !
5) This is a serious flaw/oversight/disability/etc. !
How many versions/releases from Harrier to Kaiser, to have not corrected this.
Someone from HTC please step up and address this. Please ?!
Click to expand...
Click to collapse
there is in phone options, in last tab an ""auto answer"" option after some rings in answer call. enable it but use less than 3 times...it's a big delay there in default option...i use with my bl hands free 1 ring auto answer and with cable hands free 2 times
i use this
http://www.accessoryjack.com/servlet/the-570/i.Tech-Clip-Radio-Bluetooth/Detail
bl hands free and works perfect in my kaiser
zaharakis,
You're the 2nd to have success with a Tilt.
Someone else (different forum) had success with the AT&T Tilt +Aliph Jawbone.
Trust me, I did the setup for the Tilt when I tried it with my headsets.
I want to go back to the AT&T store and see if I can demo a Tilt + Jawbone combo.
Regards,
csdkw said:
zaharakis,
You're the 2nd to have success with a Tilt.
Someone else (different forum) had success with the AT&T Tilt +Aliph Jawbone.
Trust me, I did the setup for the Tilt when I tried it with my headsets.
I want to go back to the AT&T store and see if I can demo a Tilt + Jawbone combo.
Regards,
Click to expand...
Click to collapse
Make that the third. It sure as heck works with my Tilt using the "Stock" feature in conjunction with my S9 BT headphones.
boys i beleive it's matter of some settings.maby you must make some tests with different settings with bluetooth to manage it
in dutty's and helmi_c's lite roms and with the HTweakC_2.1b(yes with this program!!) i make the settings of bluetooth and everything works perfect.
when you open this program in kaiser you have at opening an error mesage of ""unsuported device"" but a lot of it's options works perfect in our kaisers
try it and see what i mean
Gsleon3,
That's good.
Hmmm, now you're having success with a combo
Tilt + S9/Rokr, that failed for me.
OK, Plan B
I would like to respectfully request model & firmware version, both phone & headset if possible,
from responders (past & future) if you're having success or failure.
Regards,
Autoanswer: Tilt + (S9 Rokr or Jawbone) - No Love
OK guys,
How come nobody's stepped up with the firmware info (at least for the successful pairings) ?
Just got back from AT&T brick&mortar (store).
They had a demo Tilt w/o SIM, but claimed it wouln't 'work' (make/receive calls ? - as it paired w/ my bluetooth headset just fine).
Anyways, store manager's Tilt used.
Also, had to open a new Aliph Jawbone and charge it for 15 minutes.
Tilt set for Autoanswer in 3 rings + Jawbone
did -NOT- work.
4 rings then silent as call went to voicemail.
So, c'mon guys I need to know those firmware levels.
A picture of your phone displaying its firmware
level would be even better, if you know what I'm saying.
Failed AutoAnswer of
AT&T Tilt marketed in Portland,OR:
ROM version : 1.57.502.2
ROM date : 08/25/07
Radio version : 1.27.12.11
Protocol version: 22.45.88.07H
Regards,
I have the Spritn Mogul with the latest ROM from HTC that was released Nov. 29th. My auto answer does work. I have the Plantronics Explorer 350 Bluetooth headset.
Wooohoooo it works.
Dj
csdkw said:
Hi,
Neither SAP nor "bluetooth SIM access" were referenced at http://www.america.htc.com/support/tilt/docs/ATT_Tilt_English_GSG.pdf
Thanx anyhow.
The Tilt was already returned and I've stayed with the XV-6600 (bigger screen, coverage footprint, faster broadband, cpu "feels" faster, software/accessories investment).
I will correlate your advice with the XV-6600.
I'd like autoanswer to work, but more importantly...
I strongly feel HTC should address/correct this in their production.
Regards,
Click to expand...
Click to collapse
You need to read more carefully.
SAPettings
Exitao,
At first reading of your reply, I realized I'd searched the Getting Started Guide rather than the User Manual.
Just searched the user manual... no SAP.
http://www.america.htc.com/support/tilt/docs/ATT_Tilt_English_Manual.pdf
So, with all due respect... what has SAP and/or SAPSettings to do with "native" (out of the box) support of AutoAnswer via bluetooth in the Tilt ?
I don't know of a bluetooth phone without AutoAnswer, and the ones (excluding HTC) that I've used all performed as expected.
I apologize if you perceived my rantings as a quest for third party solutions.
My goal, is to authenticate that there is a
deficiency in bluetooth/AutoAnswer support in the Kaiser/8925/Tilt as marketed.
And, if it helps to innoculate future generations of HTC products,
that the above deficiency seems to have a "linear" heritage dating as far back as the Harrier/XV-6600.
Thirdly, I'd like the function to work as expected in all products but,... that's just me.
Regards,
Dj1018,
Thanks for contributing.
I'm happy for you, sincerely.
If someone with earlier firmware on a Mogul could share,
we might have some idea of whether there is a problem, HTC knows of it, and understands and/or can correct it.
Regards,
htc auto answer
the auto answer using bluetooth on the hd2 works by going into settings then advanced then at the bottom of the screen there is a small tab called more click this and the auto answer comes up and you select from there , however i looked at the htc desire yeterday and could not find an option to auto answer in the options tool , at first i could not get the phone to connect to jabra bt5020 blue tooth device , but by several attempts the two binded but failed to auto answer the htc hd2 uses windows 6.5 and it has this option , but the htc desire is an android and i could not get it to auto answer at all even the staff in the store had no idea . some had no idea that a handset can even auto answer
htc auto answer
the auto answer using bluetooth on the hd2 works by going into settings then advanced then at the bottom of the screen there is a small tab called more click this and the auto answer comes up and you select from there , however i looked at the htc desire yeterday and could not find an option to auto answer in the options tool , at first i could not get the phone to connect to jabra bt5020 blue tooth device , but by several attempts the two binded but failed to auto answer the htc hd2 uses windows 6.5 and it has this option , but the htc desire is an android and i could not get it to auto answer at all even the staff in the store had no idea . some had no idea that a handset can even auto answer
my HTC thunderbolt just updated to ver 2.3.4.
I used to use an app Auto answer by everySoft.
In my car the hands free would automatically answer incoming calls
in 6 seconds. After the update it doesn't work.
I tried several similar apps and the same error message ver 2.3.4 killed them.
I drive with hand controls, so i really need auto answer.
Any suggestions you might have would be greatly appreciated.
I did some research and found.
The MODIFY_PHONE_STATE permission was marked as "for system use only" in Android 2.3.
While this was never intended for developers and publicly endorsed by Google, there are hundreds of apps in the marketplace using it. Unfortunately, a seemingly innocent checking by the Android folks has now crippled many popular apps for Android 2.3+.
If i root the phone, can this be changed??
Hi,
Just got a new company car and its got a Sony Stereo CD player Speakers Bluetooth and Voice command/recognition
How do I pair my Wizard up. I can detect the radio and pair it, however the radio says no device detected...
Any ideas where to start?
Regards
Barry
bazza1603 said:
Hi,
Just got a new company car and its got a Sony Stereo CD player Speakers Bluetooth and Voice command/recognition
How do I pair my Wizard up. I can detect the radio and pair it, however the radio says no device detected...
Any ideas where to start?
Regards
Barry
Click to expand...
Click to collapse
Ford's probably using stereo bluetooth for its connection. You need to enable your phone with A2DP first, then do the pairing. I have had good luck with the Tornado version of A2DP for the Wizard, but only after I overclocked my phone's processor, and made some minor adjustments to the data rates at a registry level.
If you're a noob, you need to do a LOT of reading before trying this, or you'll lose your ability to generate sound altogether. Not as dramatic as bricking your phone, but makes it almost as useless...
Just search these boards, the answers are here. Search.
...and welcome to the XDA Dev boards!
Hi,
Thanks for the reply..was just starting to look at New phones!
My current Rom is 2.21.4.1.WWEwhich is the latest O2 one.
Rom Date3/9/06
Radio 02.07.10
Which Rom would people recommend updating to?
Regards
Barry
...the worm turns.
bazza1603 said:
Which Rom would people recommend updating to?
Click to expand...
Click to collapse
Normally, this is where I say, "Start a new thread, for this new question, because nobody is going to open this thread to answer that question."
However, you've asked a question that usually results in the person asking being lambasted (read: flamed) for asking a question that is, in most cases, a matter of total opinion. As has been said many times before, about this subject:
What's best for you isn't what's best for (nearly) anyone else.
Click to expand...
Click to collapse
So....that said, I recommend you look at the Wizard Mobile 6 boards, read the Wizard wiki THOROUGHLY, and know your phone very well before you even consider trying to load a cooked ROM, or you will have an expensive paperweight instead of an incredibly useful tool.
Whatever you do, please do not post a question like "What's the best ROM for me?" because only YOU can answer that question, and only after you educate yourself to what's possible, and what your specific needs are.
If you just want to sync your phone to your car, then stick with the A2DP upgrade, and an overclock (OMAPCLOCK via SmartsKey is my preferred method of overclocking). That's my advice, free of charge.
Could anyone help me find a A2DP upgrade. I have honestly hunted, but I am getting confused...
Tried Torbado A2DP without success. I run a 02 Mini S
Regards
Barry
Hi
I have got Stereo headset now showing, but its greyed out for the radio device?
Anyone got any ideas?
Regards
Barry
I would highly recommend looking at JETWare BT Extenstion. It adds a lot of functionality that MS left out of the BT stack.
http://www.jetwaremobile.com/
Hi,
Got it working....
With other phones they were pairing automatically. If you search from the radio
Phone >menu then search, after a long wait it finally pairs...
Installed http://www.jetwaremobile.com/ which may have helped...
Thanks for everyones help.
Regards
Baz