I have synchronised the Navman 4400 with the Ipaq 2210 with relative ease. However, I am having tremendous difficulty synchronising the Navman with the XDA 2. I have upgraded the ROM on the XDA and done everything as outlined in the instructions (below) from the Navman web site. My difficulty is, if referring to 2 d below, that I only have the option to select from COM 7 in the dropdown. When I go to use the navigation software (Smart St or Memory Map) I dont have the option to select COM 7 in the GPS setup. I am about to throw in the towel and would appreciate suggestions from any quarter.
1. Download the following two files:
a. BTHTools1012.zip <http://bluetooth.i-networx.de/BTHTools1012.zip>
b. EnableCharPin.zip <http://www.navman-europe.com/do_download.php?id=AA005403&download=26>
2. Follow the instructions below:
a. Run the BT-patch (see 1.a) from your PC and copy the EnableCharPin.exe (see 1.b) to your PDA. Remember the location where you copied it.
b. Start bonding the 4100 or 4400/4410.
c. When asked to enter a PIN, run the EnableCharPin application. Close all dialogs until you get back to PIN-dialog and enter "NAVMAN" (all capitals).
d. When new dialog pops up, choose COM and select port 4 in dropdown. The 4100 or 4400/4410 should be bonded and ready to go "hardware-wise"
e. Soft-reset your PDA.
f. Start SmartST and configure the GPS. From the main menu goto GPS STATUS. Select port 4 which will be in the list of available COM-ports and select 57600 voor cummunication speed. Now tick the GPS box.
I have no idea why it doesnt work for you but dont give up yet, go to the following link and download the latest version of bluetooth tools, the navman patch is there also.
http://bluetooth.i-networx.de/index_e.html
Finally, after yet another hard reset the problem is solved. After reinstalling the patch, I still only had the option to select COM 7. However, the Smart ST and Memory Map software both had the COM 7 option. All is well. Thank you for your assistance. This is a very informative and helpful forum.
Hi I also have problems with getting my 1 day old XDA II & Navman 4400 to work together, I have ipaq 2210 & navman working fine. So far i have downloaded the BT tools & EnableCharPin. Installed BT tools that's ok But when try to copy the EnableCharPin.exe to my XDA and then run it it gives the error "no application associated with enablecharpin". Then if i run the file from my pc & sync the program to the XDA it installs but i cant find it to run it!!. I know it has installed because if i go to remove programs it's in the list.
SOMEONE PLEASE HELP where i'm going wrong!.
you don't need to run it
after installtion (through PC)
try to pair with the Navman
this time you'll be able to insert NAVMAN as pairing code
Still Not working
I have now tried everything, hard reset, reinstall SmartST, BT tools & enablecharpin, start bonding still not getting any characters to type "NAVMAN" in. Even tried another PC to do the install incase it was my winXP laptop causing the problems, but it still doesn't work. I'm running 1.60.00WWE/1.60.50 rom anyone got this working with this combination?. The whole reason i bought XDAII was to have Phone/Pda/SAT Nav on one device and get rid of the others. Looks like it ain't gonna happen. Do I need any other Rom upgrade or anything else? or can some reccomend another SAT Nav solution that will work with XDAII without the hassle?.
SUCSESS!!
Tried whole proccedure again, this time a was able to type NAVMAN in and bond with the 4400!. But now the only com port it will bond with is COM7 and COM7 is not an option of the ports listed in SmartST Navman software!!. Anyone got round this?.
I have same problem with COM7 and a different Bluetooth GPS.
Bottom line I have found is that the only COM port I can assign when pairing is COM 7. Dunno why and have never seen any one else with this until now.
Nor have I seen a workaround for it.
((seems strange that one can have the ability to select multiple COM ports with a drop down list, but only ever having one to choose from))
I have same problem with COM7 and a different Bluetooth GPS.
Bottom line I have found is that the only COM port I can assign when pairing is COM 7. Dunno why and have never seen any one else with this until now.
Nor have I seen a workaround for it.
((seems strange that one can have the ability to select multiple COM ports with a drop down list, but only ever having one to choose from))
Hi All,
Thanks for all your help I have had everything working now for the last few days and is working better than it was on my ipaq!. So now have all-in-one solution i've been looking for!.
I was able to get SmartST software and XDA II to work using COM7 after I deleted my previous bonding with NAVMAN & restarted it. All working perfectly now.
Thanks again.
[Hi guys,I'm a new member here.
I got a O2 XDA II and already installed SmatSt V 2.0. When I extract and install the BTHTools1012.exe into my XDA, I check the folder Pocket Bluetooth Tools in my XDA but I did not see any thing there. So that I can't bond to find the NAVMAN GPS.Any thing wrong with that BTHTools1012.
Another thing is the EnableCharPin.It said it not a application for Pcket Pc when I click on that in my XDA.
click and run enable character pin on the PC and allow it to sync using add remove programs.
delete any previous bonding, and re do the pairing with the GPS and the XDAII once installed.
there is nothing wrong with not being able to see the contents, it should still work.
its been a while since I did this (1.5yrs on this device)
ALSO, FOR THOSE USING THIS, I HAD SERIOUS AND EXTENSIVE DIFFICULTIES USING THIS SETUP RUNNING WM2003SE, SO SHOW CAUTION WHEN UPGRADING.
Related
:x i have been trying to get the bluetooth sync to work to no avail. i am using a 3com bluetooth usb adapter on my pc and card on my notebook. i am having problems with both when i try to synchronise. i can see my i-mate has been discovered and bonded; i can send files too. but i cannot synchronise. either there is a bug in the PDA software, or its really hard (needs a rocket scientist) to use!!! either way its dissappointing. can anyone help?
by the way my nokia and ericsson phones sync fine with my current setup.
I have the same problem using a toshiba portege 4010 with bluetooth built in, it works with my Nokia but not with the XDA i am using aytivesync 3.7.1
I would also like some help or ideas please
Thanks
John
Got bluetooth to work once
I got bluetooth to work only once using a Billionton USB Bluetooth adapter. The software is neat, but requires so much messing around with to get the PDA to actually synchronise in bluetooth mode. Unfortunately, I could not get it to work again. Should have documented what I did the first time.
After trying lots of times, it works. I sycronised a XDA2 in bluetooth mode.
There are a few important things
1. You first have to sychronise the XDA2 in USB Cradle to build a standard-partnership between desktop pc and XDA2.
2.remove the XDA2 from the Cradle.
3.look which com-port your bluetooth serial port is using
4.take these settings over to the active sync settings (must be exactly the same com port)
5. pair the two devices
6.start active sync on the XDA2 and sychronise via bluetooth
It works.....
i made a better description with screenshots (in german) but i don't know how to post it.
I use a toshiba laptop with bluetooth built in, but when i scan the available bluetooth things in the XDA 2 it only finds "voice gateway" and "SSA" or something like that, there is no serial port listed, when i scan a phone (nokia) it finds "dun" "serial port" "fax" etc etc.
So i cant connect my XDA2 as the only profiles it seems to have are Voice gateway and some SSA thing, so as there is no serial port listed i cant use activesync, i have bonded with both the voice and SSA thing to com ports from 5 to 9 and get a connection, but as its not a serial port it will not work with activesync.
Sorry for my terrible description of the problem, but if yours works i am sur e it will make sence to you
Thanks
John
Your right ! The XDA2 provides no serial port profile to my Bluetooth stick too. And thats why the Bluetooth GPS Receiver doesn't work.
I know this sounds strange, but with Active Sync Bluetooth definitely works.
Yes I finally got it to work a couple of days ago with a certain type of bluetooth usb adapter and software. All I can say, is that bluetooth is not very user friendly!!!! Activesync should have it show up just as it shows "infrared" in the connection settings. This will make it very easy to select it. In this day and age, you cannot expect a technology to be successful from mass usage if it is not totally idiot proof. BLUETOOTH is not.... WIFI will rule!!!!
Hi so have you bonded to the "ssa" profile, and then what ever com port you used you then changed activesync to use this port and it then works, because i tried this and it done not work.
I also have a tomtom bluetooth that a friend is borrowing, but by the looks of it there is no point in getting it back as if there is no serial port on the available using bluetooth that will not work either
Thanks
John
try this link. it may help u set up your bluetooth with active sync - http://www.bluetoothnews.com/features/ActiveSync.htm
@applecom
No. You just have to pair the Devices. Don't connect to any Profile.
Pair them and then start Active Sync from the XDA 2 and connect with bluetooth.
activesync and bluetooth with xda II
start > settings > system > bluetooth settings > Activesync over blutooth (START)
Nutty but there you go.
XDA II Bluetooth ActiveSync
I noted if you add or change the registry will work even better :
\HLKM\SOFT\Microsoft\Bluetooth\Activesync
IsBTASsetup from 0 to 1
Hi
I have changed the registry like you said, But how dose it work better, the only problems i have are when i ask activesync on the XDA to connect over BT it oftern trys and says port in use, i just retry a few times and it works. After doing the reg edit it did connect first time, but is this what you ment by "its works better"
Thanks
John
As this my first ever post, I don't want to come over as smug, but I took delivery of my XDA 2 today and it synced using bluetooth after about 25 minutes of 'messing'!
All I did was delete all the bonding between the PC and the XDA and told it to sync via bluetooth, initiating from the XDA, I thought that it had failed...but then the XDA sprang to life and 'Bob was my uncle'!!
Very impressed with my XDA 2, having used an XDA for about 8 months.
Andy.
Bluetooth Sync
What I meant was it has become easier to get XDA II sync via bluetooth. Please note that you have to unpair your PC first then change the registry and pair again. If your PC's Bluetooth dongle support Headset profile ( I used anycom USB220 which has this profile) you will see your XDA II asking you if you want Headset profile added and Activesync screen for bluetooth appeared as well. Changing the registry will always make the sync work is what i noted. Seems like XDA II Bluetooth supports many profile just that dont know how to make it works.
Bluetooth Activesync problems
I'm on the verge of giving up on this! Think I should stick to USB sync...here goes...
I've tried the tricks mentioned in the forum to try to get my XDA II to sync via bluetooth with my Sony VAIO laptop (it has built-in bluetooth). I can get the two devices to bond (I enter the PIN number on both the laptop and XDA and it succeeds) but then I try to run the Bluetooth Activesync setup (in Settings-->Bluetooth Settings on the XDA) I get an error message every time that says "Please bond with other Bluetooth device which supports serial port or Activesync profile as your Activesync partner!"
I thought I already HAD bonded the devices? Any ideas?
Cheers
Carlton
Finally sorted it out. Delete the partnership that you already have. Start from start>settings>system>Bluetooth Settings. When you clik start, then pair your device again. After the pairing, you will get the message that Bluetooth Active Sync is now ready.
Still no joy
Thanks for your help Merc.
I tried doing exactly what you suggested but still doesn't work. This is what happens:
I deleted the existing bond on both XDA II and PC.
I went to start>settings>system>Bluetooth Settings and clicked on Start. This gave me the message "Please bond with other Bluetooth device which supports serial port or Activesync profile as your Activesync partner!" like before, then automatically opened the Bluetooth connections control panel in the "Mode" pane. I chose 'Discoverable' and clicked OK. I then went to my PC and used the Wireless Link control panel and clicked 'Add' (to run Bluetooth connection wizard) which searched for devices. It found my XDA II and I entered the passkey on both XDAII and PC (same passkey on each).
The Bluetooth connection wizard then told me that the XDAII was offering DUN (dial up networking) services. I selected this and then clicked next. Was I supposed to select this (actually, it made no difference when I tried again without selecting!).
The wizard completed and both the PC and XDAII notified me that the bond was successful. I then waited and waited for something else to 'happen' (like a message to say that Bluetooth Active Sync is now ready.) but nothing happened. I gave it a couple of minutes.
I went to Activesync on the XDA and tried the 'connct with Bluetooth' just in case it had worked, but nothing happened. I went to Activesync on the PC and tried using a different COM port for infrared/serial links (as I assume this is what bluetooth uses) but no joy. I only had COM3 and COM4 showing in the connection settings in activesync, which surprised me as I thought there would be more.
That's it. I tried 3 times but still no luck. Any other ideas are greatly appreciated!
Cheers
Carlton
The
Your procedure is just like mine. But I used "On" and discovered the PC from the PDA. Do not use "Discoverable". Let me hear if you have any luck
The only way I have got it to work is assigning the bluetooth serial port to COM 6. Then set Activesync on the desktop to COM 6.
Any other COM port just won't work. Anybody else got it working on a different bluetooth COM port?
xdaguru
So far I have been unable to syncronise using bluetooth. I could do it without much sweat win pda2k (ba), but not with jasjar (universal) so far. Any other owner managed to figure out how to do it? Cheers.
Got it working no problem at all. In fact I managed this before I managed to get it working with USB.
I used the same method that one would use for any WM2003 device.
Set PDA to discoverable on JASJAR
Look for BT devices from PC
Select the JASJAR
Select BT serial port
Find out the COM port of this serial port. Note it down.
Fire up activesync
Change the connection settings to look on the com port you noted down.
On JASJAR got to BT settings
Add a BT device
Select your PC
Select Activesync partner
Go to activesync
Select synch via BT from the menu
i will try again
i prefer the wm2003 wizard to wm2005, i will see maybe i missed something. thanks for clear instructions
still problem with bluetooth
Well I still have been unable to get the bluetooth working for the syncing. I follow the instructions in the booklet and help files, + what I just been told, but there are two issues,
the serial port is for outgoing from the PC, so that could not be used.
In the Com ports tabs two com ports get assigned one for incoming and one for outgoing, with the BA, we use the incoming which we feed into the Activesync, and it works then.
If I do that and create a sync relationship on the pda, there is the option of assigning outgoing port from pda, however when relationship is created only the incoming serial is showing up...
anyways, i have no problem using bluetooth on BA, and could not get it to work on jasjar/htc univ.
Doesnt matter I dont mind using the cable, but dishing the equivalent of US$1400 for a pda whose wizards dont work properly is a bit of an anteclimax.
And talking about ergonomics, the virtual keyboard has the annoying tendency to cover what u are going to write, so u dont see what u are writing...
They also removed the Avantgo utility from the IE, but I got it back by installing the one for winCE and upgrading over...
So for now, I will keep working on my BA (pda2k) as I dont want to waste my time working around bugs, until these get ironed out.
Greetings
Nabil H
I hope all these bugs will be fixed after the official launch
working at last
i managed to get the bluetooth syncing, the secret
1. hard reset,
2. recognise device on pc side
3. create activesync partnership on pda side
4. check incoming com port on pc side
5. feed that to activesync on pc side
6. check activesync partnership from pda side with pc
7. pda will pick up on partnership serial connection as being activesync
8. incoming and outgoing com ports ready to be used on pda side
9. choose outgoing com port on pda same as incoming com port on pc
10. connection established syncing starts...
All this without starting using the usb cable (so different from BA method)...
hope it helps others...
probs... again
Now after setting up and synicng with bluetooth I used the usb link to sync, and it complained about an error. I had to remove the bluetooth setup, and it is still complaining, I give up
I guess the famous russian saying is very wise: "Better is the enemy of the good"
Nabil H out
bluetooth, usb link and wifi
No wonder bluetooth was turned off by default in this jasjar shipment. I believe the following are bugs:
1. U can set up activesync over bluetooth initially after a hard reset.
2. If you then set it up after over a usb link, u lose the bluetooth setting, and can only sync over bluetooth after a hard reset again!
3. If u set up bluetooth, u get difficulties with wifi not connecting (on my system I can only get that back by disabling my wifi connection then enabling it again, dont ask me why this is so, i do not have the foggest clue)
4. When ur wifi is worknig u start having problems with bluetooth connections.
5. Even with a bluetooth sync working, u cannot browse folders on ur jasjar device from another device, as this service does not seem to be implemented.
This does not look very good for users who have multiple/various network connections...
So a patch is already needed for these connectivity issues...
Developers, look into this please...
Greetings
Nabil H out
wifi and bluetooth - solved
I finally managed, after some sweat to get:
. Wifi and bluetooth working together
. Two pda's BA and Universal using wifi simultaneously.
However what cannot be done is:
. Using two pda's with activesync simultaneously, this is a limitation of MS Activesync.
Greetings
Nabil H
PS On club imate website there is now a faq fro JASRAR (HTC Univ).
wifi and bluetooth - solved
Nabil,
can you post what you did to get this working.
thanks.
--------------------------------------------------------------------------------
I finally managed, after some sweat to get:
. Wifi and bluetooth working together
. Two pda's BA and Universal using wifi simultaneously.
However what cannot be done is:
. Using two pda's with activesync simultaneously, this is a limitation of MS Activesync.
Greetings
Nabil H
PS On club imate website there is now a faq fro JASRAR (HTC Univ).
Hi,
I've trawled the forum and I've followed all the TomTom setup procedures. The Problem is they seem to be for people who can't get TomTom working at all. I can get it working, just awkwardly.
Once I pair with my GPS receiver and go into TomTom i can get a connection. However when i quit TomTom and turn off the GPS it seems to forget. Next time I turn it on I don't get a connection.
The way I understand TomTom is that it seems to wait for the GPS receiver to contact the phone. This seems odd as I would have thought the phone would be the one to initiate contact.
Anyway my GPS receiver just seems to forget what phone it was connected to. TomTom obviously isn't forgetting the port, windows obviously isn't forgetting the pairing. But Every time I use it I have to re-pair the receiver (thus reminding the receiver of the phone it's supposed to be bonded to). It's beginning to drive me a bit insane.
Anyone else have this issue? Perhaps it's to do with my incoming and outcoming ports? Hopefully someone has already solved this? Not seen any references to it anywhere.
Lewis
Hello,
Which version of Tomtom are you using ? The last one (5.21) ? If not, try to upgrade and try again.
Yep 5.2 latest release.
I was hoping upgrade would fix it but alas no.
Lewis
BigDamHero said:
Yep 5.2 latest release.
I was hoping upgrade would fix it but alas no.
Lewis
Click to expand...
Click to collapse
Don't mean to be picky, but 5.2 or 5.21?
I've held off installing TTN on my Wizard, as it works fine on my iPAQ 4700, I have a cradle for that, and according to ttcode, my current device is actually my old 3970, not the current iPAQ... Last week, I had a couple of hour drive to do, so I thought I'd give it a whirl. After an email exchange with TomTom support (who were more helpful than I'd originally given them credit for), I had a new activation code for the Wizard. Here's what I did, from a fairly recent hard reset with no previous TTN install whatsoever. Skip the mail if it doesn't look helpful, but I'll detail my steps in case it helps anyone else...
Although I believe the PC install is mended in 5.21 I copied the map and voice cab files from the CD to my SD card and installed them from there. The GPS drivers and main app I installed from the download I got from the TomTom support site by running the setup util on my PC. Once everything was installed, I moved the maps which seemed to finish up in a sub-directory on the card to the root of the card.
I paired the GPS (my old Emtac BT one) and selected serial port profile. I tried all the offered serial ports in the "Other BT GPS" list in TTN but none worked. Then I went to 'COM Ports' in Comm Manager/Bluetooth Settings and selected "New Outgoing Port". I picked the GPS from the list of paired SPP devices, and it created a new BT COM port on COM6. That definately hadn't been in TTN's list of BT com ports before, but is now there in the list with about half a dozen others. I selected that in the "Other BT GPS" list of BT ports, and TTN connects to the GPS each time.
As I said, I'd recently hard reset the device to try and prove a problem with my BT car-kit soit's quite possible the clean install was the secret, but try creating a new outgoing COM port against the GPS and see if TT remembers that...
Dox
BigDamHero said:
Hi,
I've trawled the forum and I've followed all the TomTom setup procedures.
Click to expand...
Click to collapse
Which?
There are 2 general ways to set it up, 1 works 100% (i use it so know it does ) 1 i dont use and have never tried so may well work in the reverse direction and be causing you errors.
The way i set up tomtom; pair the BT GPS. Open an OUTGOING port to the BT GPS, set my GPS as OTHER (wired/cable) NEMA device (NOT bluetooth) in TTN5. now my tomtom connects to the bluetooth, not the otherway round. This method has thrown up no errors for me at all.
If you have followed the reg edit/hack to show the GPS page in connections then i dont know how the settings differ and the possible results this could have on connection issues.
Let us know which way you are going
I have the exact problem as BigDamHero. Each time I wanna use TTN, I need to delete the previously paired BT GPS and then pair it again, otherwise the TTN will just say No GPS Device. I use TTN v5.21 and Wizard with Windows Mobile 5. I tried my BT GPS device on my brother's PDA which runs on Windows Mobile 3, and it connects like a gem every time. I am also looking if anyone has solved this issue, cos it is tedious re-pairing every time.
Had the same problem until 5 mins ago! Found an explanation in another thread, but only in Dutch..
Here's how to do it:
Turn on GPS
Activate bluetooth on device, go to BT parameters, delete previous pairing like you're used to
Create new pairing, choose GPS, enter passkey, check Serial port in services, go to COM ports and add outgoing port (e.g. COM6) like you're still used to :roll:
Add an incoming port too (e.g. COM7) <-- Here's the trick!
Set your GPS apps to use COM6 (the outgoing one)... and here you are! This time it will work, you can turn off GPS and device bluetooth, turn on again and it will connect by itself.
If you want a bit more you can activate GPS panel, set program port to COM8 (then you will have to use this in your apps) and COM6 as hardware port.
Everything works fine now!
hey man, wot a coincidence....i also just read that post which had the dutch explanation.....BUT however, it's not working for me.
toneslee said:
hey man, wot a coincidence....i also just read that post which had the dutch explanation.....BUT however, it's not working for me.
Click to expand...
Click to collapse
I did everything in the list except for creating the incoming port and it still works everytime (I know that's no consellation to you). I wonder if something else you've installed, or the way you installed the app is causing the problem? Is it worth a hard reset and trying the entire install on a clean wizard?
Dox
A friend didn't need the incoming port either. I believe it has something to do with the GPS, as he has a different brand than me.
With mine, before adding the incoming port if I started an app without erasing/redoing the pairing before I would get a notification saying "Navman GPS wants to connect" and asking me to pair. It would keep coming every 10 seconds whatever I did.
BigDamHero, what brand / model of GPS is it?
Maybe we can see if anybody here, or over on pocketgpsworld has been able to make the same combination work and if so, what they had to do to get it to fly...
Dox.
well, tomtom was the very first thing I installed when I got my new vario. it was only after I got tomtom fully working (but still need to re-pair everytime), then I installed a couple of simple Card games.
toneslee said:
well, tomtom was the very first thing I installed when I got my new vario. it was only after I got tomtom fully working (but still need to re-pair everytime), then I installed a couple of simple Card games.
Click to expand...
Click to collapse
A quick glance at pocketgps suggests others are having similar issues. There's a thread here that suggests leaving it a while, and I seem to remember other GPS issue threads saying power up the GPS and let it get a fix before starting TTN. A more detailed probe round the forum will probably show more of the same.
Dox
I've just flashed my Qtek 9100 to a new ROM, (the O2 one), and since then I've been getting this same problem. With my previous ROM everything worked fine. I was able to turn of either my PDA or GPS, and they would always auto-reconnect in a few seconds. Looks to me like something broke during one of the ROM changes. Which ROM versions does everyone with/without this problem have?
By the way, I have a BT77 GPS.
Hey sorry for the total lack of reply. Been snowed under with exams.
Ok I tried most of what you guys said but didn`t work. BT ports aren't available to select as hardware ports.
However I have managed to solve it. The key was to pair the GPS, and create an UNENCRYPTED OUTGOING port. That's all. Previously I had encrypted ports outgoing and incoming. My GPS applet in control pannel is set to none so it,s nothing to do with that.
I don't know what my GPS is. Its unbranded. One of the cheap common ones.
Hope this helps some people with the same problem.
Lewis
Hi,
I have got a XDA exec with Tomtom6 and a Solar Bluetooth GPS receiver...I am able to pair the device with my PDA and am also able to configure and define incoming and outgoing ports...COM 8 for incoming and COM 4 for outgoing....when I try and go to my tomtom software the only option which I get is to select the GPS type, in order to configure the device....and after selecting it keeps connecting to GPS device and nothing happens....I have even tried with Incoming (COM4) and Outgoing (COM8) and even with COM0 settings for COM ports within XDA, but to my bad luck I am not able to connect to the GPS device....can someone kindly help me with the above please
thanks
I have the same set up with the same problem. I have been told that port allocation & therefore GPS recognition is a known problem although TomTom tell you that there are no conflicts with the Exec & TT6. I have been informed that it is necessary to either download a program called GPS Dash or make changes in registry but I cannot find an idiots guide of what to do. Any help would be much appreciated before both the Exec & TT get thrown out the window.
I put a posting on a Radio Control forum that I subscribe to RCMF.co.uk as there are quite a number of very knowledgeable folks that frequent the site.
This is a reply that I received today from a guy who I think works for O2 and he has agreed to me posting her.
.......................................................
Now then..... Bit of a complicated one this
Courtesy of our device specialists
First step:
You will need to install a registry editor. They’re available from various websites, I suggest Googling “Pocket PC registry editor”, but we can’t guarantee the reliability of third party software.
· On the XDA Exec, Go to Start > Programs and then load the newly installed registry editor.
· NB: This has to be done exactly as below in order for it to work:
Go to: HKEY_LOCAL_MACHINE\ControlPanel\GPS Settings
Delete the DWORD marked "hide"
Add a new DWORD called "Group" and give it the value of "2" (dec)
NOTE: There are different types of keys you can add, you must make sure you add a DWORD, Click it so the values entry appears then add the value 2 as described above.
· Exit the Registry editor.
· Select Start > Settings. Then go to connections using the tabs at the bottom of the settings screen.
· The GPS panel should now show up in connection settings.
Next:
· After the Bluetooth receiver has been paired with the device, you’ll need to do the following:
· In Bluetooth Settings, select COM Ports tab at the bottom > New Outgoing Port > [Choose GPS Receiver], click Next then select the OUTGOING port to 8. Click Finish. Select OK (top right corner)
· Go to Start > Settings > Connections and open the GPS control panel, select the GPS program port to COM 0 then click Hardware tab. Set Hardware port to “None”. Select OK (top right)
· Start TomTom, Click Preferences then GPS settings, select “Other Bluetooth GPS”, and COM 0 should be at the top of the list (Important: IF “COM 0” is not in the list, you will need to hard reset the device, ensuring your contacts and saved files are backed up beforehand. It may then be necessary to begin this process again after re-installing TomTom). Select COM 0 as the GPS Port and then exit TomTom. (Make sure you fully exit the program so it’s no longer running)
· Go to Start > Settings > Connections and open the GPS control panel again, now select COM 8 in the Programs section (the one we set up as “0” previously). Select OK (top right).
· Open Bluetooth again in the connection settings menu and go back to COM Ports. Select GPS Receiver by holding the stylus down on the word and selecting edit then change the outgoing port from “Port 8” to “Port 0”. Select Finish, then Select OK (top right).
· Go back to Start > Settings > Connections and open the GPS control panel again and in the Programs port select NONE.
Select OK (top right), then OK again to close settings menu.
· Finally start TomTom and the GPS receiver should connect automatically. Wait for a couple of seconds and click the GPS settings and it should be connected.
The port settings shouldn’t be changed after this point, or the process above may need to be repeated, so the customer should now steer clear of the GPS settings.
If the device experiences issues connecting to GPS, you should ensure the GPS receiver is powered up and then exit TomTom and restart it. If this doesn’t resolve, a soft reset may be needed.
GPS Dash can be downloaded from www.gpsdash.com, but we aren't aware that this needs to be added first – you should try the above before installing, we can’t offer support upon, or guarantee the reliability of GPS Dash or any other third party applications.
Hope this helps.
..................................................
I will be trying this probably next week so will let you know if I have any success.
What about the poor old XDA11i ??
Arejay
I have been fumbelling around for ages trying to get TT6 to work on an XD11i .
I know that it is possible as there are members on line who tell me they have it running !!.
I am trying to get a bluetooth reiciever to talk to TT6 but getting no where .
Dont suppose you could ask your friend if there is a XDA11i fix as well ?
I just get the No GPS Device all the time despite the two items talking ( lots of flashing on the Reciever led )
Best regards
Astro1
Hi Astro
Excuse my ignorance but I assume that the XD11i is an O2 product. If it is I`ll certainly ask the question.
XDA11i
Hi Arejay
Yes the XDA11i is an o2 product with a great spec but no longer supported as newer models now availiable ( aka exec/ orbit etc ) it is an HTC device 2020i but has never been converted to wm5 so getting left behind.
Thanks in advance for you help , getting very frustrated here!
Astro1
Received a reply from another guy who I know to be very knowledgeable on most things to do with PC`s etc.
Try this solution
After pairing your gps reciever go to tomtoms satellite config and select "other cable" rather than bluetooth. Select a speed (start at 2400 and work up) then when it asks for the port select the bluetooth port. there may be two ports so you will have to suck it and see but this is the solution I used on my SPV M2000 which is an XDAIIs. When you find the right port and your reciever connects you can try it again but with different com port speeds.
I expect I will get another reply soon and I`ll post t here.
Tried , crashed and burned ( well not quite)
Arejay
I spent the afternoon going through all of the tom tom settings , leaving it a while between each.
After pairing I started Tom tom and went to the buetooth and the other nema settings( within the tt6 change preferences / gps section ).
One at a time I went through the offered port numbers.
By choosing any setting that was not port 6 the GPS reciever turned to stand by , going back to port 6 and it came to life again .( this was the case with both " other bluetooth and other nema " choices.)
With either choice and port 6 selected there was a lot of Bluetooth activity but at no time did TT6 like the choice ( little blue/ yellow disk doesnt spin) or at any time did the GPS find as satalite .
Using either of the two remaining choices tom tom( wireless or wired ) had the same effect ( turned the GPS off) .
With the other two setting choices I ran through the possible speeds but this made no difference .
TT6 continues to say "No GPS Device " which is short for not paired or set up correctly .
Any help here greatfully appreciated , getting to my wits end. ( wonder if I have brought a duff GPS unit ? but then why the activity when port 6 is selected ? )
Checking in Bluetooth settings the outgoing port stated ( cant be changed ) is port 6 !
XDA11i is a wm2003se device .
I have had no joy getting other programmes to talk to the gps either ?
Astro1
First the bad news:
Astro - Quote from O2 guy
We are at a loss here to be honest, TT is an unsupported app so it
may be that it's the application that is causing the problems rather
than the GPS itself.
I think this is why people suggest installing GPS Dash?
Sorry I couldn't offer any more help
Now the good news:
I now have TT6 up and running on the Exec.
I initially set it up as per the instructions that I posted but there was a problem getting the Com 0 at the top of the list in GPS Preferences in TT.
I then did the hard reset and reset all the parameters exactly as per instructions and TT linked to the GPS receiver immediately.
The one good thing about mucking about with computer bits, is the massive sense of relief when it all starts working ok.
But others have it working !!
Arejay
Thanks for your help , there are others that I am aware of that have it working though .
Appreciate that tt6 maybe unsupported though as it is a new programme whilst the XFA11i is some years old !
Thanks again
Astro1
I have a O2 Atom and an O2 XDA II and I have been able to get a Solar GPS bluetooth unit to work with both units. I didn't need to install any registry tools and don't believe that you should need to, to get this to happen correctly.
Firstly on the o2 Atom.
1. Open Bluetooth and pair to the device and check the box to have this device used as com port.
2. Click on com ports. If you already have one, click and hold to delete it. Leave screen and return to make sure that the registry has been updated. You should now have a clean com port list. Choose an incoming port as GPS doesn't need to be bi-directional. It only needs information in, not out.
3. Go to >> Settings and then >> System.
4. There is an icon for External GPS. Click it.
5. Under GPS Program port choose the com port that you created in step 2. Hardware doesn't need a port in this instance. For safety sake, change the com port speed to match that of your GPS device (normally 9600). Under >> Access tab, make sure that manage connection automatically is checked.
6. Open TT6, and tap screen >> Change Preferences >> Right >> Right and then choose Show GPS status.
7. If you need to, click the configure option choose the appropriate GPS receiver (probably Other Bluetooth and then hit select followed by continue.
8. Choose the bottom-most post of the same number that you have created. After a short pause, TT6 will return to the previous screen and all being well, you should have a GPS signal.
On the Xda II, pair as you would any Bluetooth device. As there is no External GPS link in the Settings >> System all you need to do is create the incoming port. Complete the same TT6 setting with regards to the receiver and you should be good to go.
Remember, that all GPS devices take some time to acquire data and in that time, they can appear as not connected. I find that if you power on the GPS receiver and within 60 seconds start TT6, but the time you are ready to go I have a valid GPS signal and away we go.
Good Luck.
Delta
Hello
unfortunatly the search didn't work for me to find a solution (maybe anybody can help me..)
i simply want to pair my Universal with my bluetooth gps receiver.
in settings/connections/bluetooth i added a new device.
it took a while, then it found my gps receiver and asked me for passkey. i used "1234" - but i am unsure, if that was the right key (i'm 80% sure..)
after that i got a new entry in the list of the avaible devices.
so far so good... BUT:
the gps receiver only appers as "disconnected". when i want to "connect" to it, it says "Your device did not connect with GP-700. The connection failed or the passcode is incorrect."
maybe the passcode is incorrect, ok. but i can't insert a new passkey, because it won't ask me for new entry after searching for new devices. i also can't delete the gps receiver entry.
I checked the box in "select services to use from this device. Serial Port". is that correct?
...hmmm it has to be so simple but i can't pair... gr......
please help me
nobody knows an answer...? ;((
hi, we maybe able to help but need more info as i would for sure. what rom are you using? and possibly what radio version? i use a bt gps with mine and passcode is 1234. not sure if thats the case for all though. depending on the rom im using mine shows as disconnected sometimes but i also have to create a valid com port to use with it. hope that helps.
Also what program are you using with you BT device? Mine pairs with '0000'.
If I use Route66, I don't even need to pair it.
When using iGo8, I do pair it.
When using Google Maps, I also need to add a COM port (I use 1 as some programs can't use 0 - eg, MemoryMaps).
Hey, thanks for answering my question.
i am using Tomal v8.90 (light). My radio version is (after unlocking) 0.00.00. Should i flash it back to 1.18? do i have disadvantages?
i wanted to use tomtom..
hope these information helps
I think there's your problem. I'd flash either 1.15 or 1.18 radio.
hm... anybody can help me..?
ThaMasterT said:
hm... anybody can help me..?
Click to expand...
Click to collapse
Flash an updated radio...1.15
i flashed to 1.15 succesfully.
i found out, that 1234 for my device is the right passkey.
i connected in connections/bluetooth to my device (like i wrote above) and it says "connection successful". after that my device is listed under "disconnected" again. furthermore i can't connect to it, when i click on "connect" in the settings. i can't connect to it in tomtom, too...
when i click on the device (listed under connection-settings in "disconnected") the partnership settings will be displayed. here i can select services to use from device. it provide me a list with one item to check: "serial port". but even if i check or if not, it wouldn't affect anything(?). i simply can't connect to my device...
hey,
i solved that problem. i choosed "the right" com port to use the receiver.
thats a little weird, cus i already choosed some random com ports before and it never worked for me. unfortunately i didn't get some useful error messages or something from tomtom or other programs. now i tried a different port again and suddenly it worked...
sorry for the trivial problem and thank you very much for helping me.
btw: the device is still listed as "disconnected" in settings. who the **** cares...
i have the tomtom gps mkii sirf III and i don't get it paired or manually connected either, but then, when i installed the tomtom software, i found out, that it does not need to be paired in the windows settings first. ok, you might say, this is a coincidence, because tomtom works fine with their own hardware, of course. but no! in my settings there is also an "external gps" point, and all you need to do is put in a proper port and speed and it'll work. the easiest test for that would be google maps. in the beginning i also worried about pairing and connecting, but i found that i didn't have to do that.