Ive been trying to find where i can change the username/password combination for a gprs or wap internet connection.
the only thing i can find is the initial prompt when i first dial the connection, but surely it can be changed at a later stage.
Does anyone know how to get into these settings?
passwords
i think these are server based passwords, not something a user can change. you will have your own security set up on your xda, the passwords used are login passwords
yes but i want to change them as my access passwords are different depending on which sim card i use.
I know, it is really annoying. If you select the option "Save Password", I couldn't find a way to change the password.
Either you may create another connection with different name having different username or password.
There is a way to find out the stored username.
Run a registry editor, and go to
HKEY_CURRENT_USER->Comm->RasBook and look for your connection listed in the tree.
I believe the only way to reset the password is to remove the registry entry (or the modem entry in connection manager) and create a new connection, though I don't believe it to be a bright idea.
While on the subject, I discovered that if you delete the connection:
Settings->Connections->Modify->General Tab, the modem connection neither gets deleted nor is displayed. If you try to create another modem connection of the same name, it just says that modem already exists, but does not show up.
Hi, I have tried a search on this topic but not found any relevant discussions.
I am using a Qtek 2020 in France with SFR as my GPRS provider.
I have been trying to connect to my work VPN using the IP address, username and password I use on my desktop and pptp as the VPN type, however every time I try and connect the operation times out and asks me to check my username and password.
When I review these details I have noticed that my 12 character password defaults to a 16 character password every time, of course I cannot see what the password has defaulted to as it comprises of ***'s and is non-copy-able.
Is this normal behaviour and the problem lies elsewhere or is this a known fault?
Thanks for any help regarding this matter.
PS - should I eventually manage to connect to my VPN can you offer any advice on how to map a network drive on my Qtek or any way to access the files on the remote server?
Help...
I have a HTC 3600 (handy as I'm posting in this forum ) and I have been trying to connect it to my work wireless setup. This is fairly locked down and has a hidden SSID and requires me to enter credentials (user name, password) to access the web. I can successfully connect to the Wi-Fi, I am issued with IP address etc but can't then take the next step to connect it to the web.
I have found an area to add a proxy with username and password - I do this but still nothing. One odd thing is that when I then go back to try editing the proxy settings 9 times out of 10 it has vanished and I have to create it again!!
This is causing much hair pulling!
Any direction/help in this would be great as I am now a little stuck.
I am on AX3L v3.0.9 build.
Cheers
Update
I have found out that if there are two settings in the connections summary - such as 'My Work Network' and in my case 'etisalat UAE' the proxy setting never gets lost. Is this a quirk, is there something that I am not understanding (I know the obv. answer to the last question is yes!)
This now brings me to my nest challenge which is how do you arrange these connections? What I mean is that if I am at work/home and have a wi-fi link active how do I get the device to pick this in preference to a GPRS connection which it should use at all other times? I have tried looking for some kind of guide so I can work through this my self but no luck so far..... if anyone knows of such a thing or can point me in the right direction then please reply to this.
Cheers
I have a major issue with my college WiFi network, I can join from every OS, but not from WM (even Symbian can do it!)
My university uses a certificate-based wpa-tkip, I have installed the certificate on my Touch Pro, but I can't login...
More details can be found @
http://www.asi.polimi.it/rete/wifi/istruzioni/Servizio Wireless - Guida Utente.pdf
http://www.asi.polimi.it/rete/wifi/istruzioni/Istruzioni WiFi Linux v1.0.pdf
The language of the guides is Italian, but the images and the scripts are in english, I hope you can help me out with this issue *__*
I even installed Secure2W, but it seem to not work...
SOLUTION @ http://forum.xda-developers.com/showpost.php?p=2815200&postcount=15
Anyone?
I can't really find a solution ç__ç
Same issue here. This connection would be very useful, because the whole campus is covered by wifi and since I spend lots of hour there...
After installing the certificate, while attempting the connection, a further username+domain is required. That does't happen with a pc or a mac.
Some specs about the authentication:
- Auth: WPA
- Encr: TKIP
Certificate:
- Sha1 RSA @ 1024 bit
Did someone succeed in logging into similar networks?
Fulcrum.
Are you using Schaps Advanced config 3.2? If so then you need to make a couple of changes.
619619 said:
I have a major issue with my college WiFi network, I can join from every OS, but not from WM (even Symbian can do it!)
My university uses a certificate-based wpa-tkip, I have installed the certificate on my Touch Pro, but I can't login...
More details can be found @
http://www.asi.polimi.it/rete/wifi/istruzioni/Servizio Wireless - Guida Utente.pdf
http://www.asi.polimi.it/rete/wifi/istruzioni/Istruzioni WiFi Linux v1.0.pdf
The language of the guides is Italian, but the images and the scripts are in english, I hope you can help me out with this issue *__*
I even installed Secure2W, but it seem to not work...
Click to expand...
Click to collapse
leobalou said:
Are you using Schaps Advanced config 3.2? If so then you need to make a couple of changes.
Click to expand...
Click to collapse
Do you mean enabling:
# Validate server certificate
# WPA authentication
???
No I mean setting:
Network -> WPA auth... from enabled to Disabled
And Wi-Fi delay after boot: 0
I could not connect - I changed these settings, rebooted and it resolve my problem.
I hope this works for you too.
Fulcrum1 said:
Do you mean enabling:
# Validate server certificate
# WPA authentication
???
Click to expand...
Click to collapse
Ok, I'm gonna try tomorrow morning and I'll report back asap.
Thanks
Thank you, I'm going to try tomorrow too
I hope to reply a success from my Raphael!
Uhhhmm, tried today and nothing happened...
Sometimes it doesn't connect ad sometimes it asks for User+Domain
Fulcrum
Sorry to hear that - it worked for me and others - sorry.
Can anyone else help this guy???
Fulcrum1 said:
Uhhhmm, tried today and nothing happened...
Sometimes it doesn't connect ad sometimes it asks for User+Domain
Fulcrum
Click to expand...
Click to collapse
Fulcrum1 said:
Uhhhmm, tried today and nothing happened...
Sometimes it doesn't connect ad sometimes it asks for User+Domain
Fulcrum
Click to expand...
Click to collapse
The same happens to me
I will try again more combinations tomorrow...
Sorry for the bump, but I think I have found the issue.
When I try to connect to the network and configure the access wm tells me that there is no personal certificate, but I have installed the certificate.
But I noticed that the provider certificate is an Intermediate, not a personal certificate!
So I can't configure anything, nor connect!
There is something wrong with the certificate installation, why it is located in Intermediate and not in Personal?
EDIT: I've renewed my certificate, and now it's in the personal tab, the previous one was without the personal Key, this time must be it
It's a no-go ç__ç
If I choose PEAP autentication the phone locks up and needs a soft-reset when I try to connect
I've solved it!
Now I can successfully connect to the WiFi Area!
A tutorial is on the way
Here I am, sorry for the long delay.
I solved my problem following this procedure:
Install the certificate on your device (The certificate must have the user key emended)
You must edit this registry key: HKLM\Comm\EAP\Extension\25\ValdateServerCert change it to 0
Reboot your device
Now you can create your network settings, for my network I had to set:
Network name: The network SSID
This is a Hidden network: True
Autentication: WPA
Data Encryption: TKIP
EAP Type: PEAP (Select your certificate from the list)
That's it, now it should work, or at least it's working on my network
Hi!
u have a little typo in there: its HKLM\Comm\EAP\Extension\25\ValidateServerCert ... and unfortunately this solution does only prevent WM to check for a serverside Certificate but does NOT solve the bug with the configuraton - popup:
o When coming to the page where u can change the auth method from certificates to PEAP, then the popup will nag us. No chance to get into the peap config to set MsChap V2 for example. We *can* prevent the popup by renaming the key for the certificate method HKLM\Comm\EAP\Extension\13 to HKLM\Comm\EAP\Extension\130 for example (so the popup is elimanted because then peap has the lower number and is handled first) *but* its still impossible to get into that damn config...
*That* Problem seems to be unsolved so far.. :-(
One of my employees told that he managed to get into the network by simply pressing "ok" at this popup, closing the wizard and when connecting to the network the username / password (mschap v2) Dialogue came -> and he was online. But unfortunately this was un-reproduceable
Any hints highly appreciated (for getting into a secured network by mschapv2 on user/password basis)
Yeah, I'm having the same problem as well...
I tried to follow the intructions to log on the wireless network available at the hospital I work, but these instructions are for desktop computers and notebooks and they have steps that I can't accomplish in my blackstone. The instructions are the following (for windows XP):
-add a new network with the name: wifiuel
-choose WPA2 autentication
-choose AES cryptography
-choose PEAP access, go to properties and uncheck all options. Also, at autentication method EAP-MSCHAPv2, click on configure and uncheck the option to use the logon's name and password automaticly.
There are a few more steps, but from this last one I can´t go on. When I tap on the properties buton on my blackstone, I get the following warning: "Cannot log on to the wireless network. This network requires a personal certificate to positively identify you."
I've tried to make the registry tweaks available in this post, but I still can't connect. The network manager says I´m connected but at the same time, the little locker icon is also shown in front of the network's name and I just can't access any website.
The real thing is, as licht77 said, I can get rid of the WM checks for a serverside Certificate but it does NOT solve the bug with the configuraton, as I still can't get into the peap config to set MsChap V2.
Can anybody help us?
Same on My Rhodium TP2
My University settings are:
SSID: 4csuuseonly (visible)
Security: WEP-enterprise
Encription: TKIP
cert: PEAP
than i have to put Username and Password; but i could never get to that step.
It did worked couple of time for me,
What I did was I created a LEAP in wifi settings with SSID, USERID and PassWord
then I enter the SERVER ,ID n Password Under "Enroll" tab in wifi settings
It did work few times; I don't know if that may help
We all Need a Solid Solution
Edit: I tried SecureW2 software to connect , Played with the software for two days. Did the reg hack, didn't help either.
Finally I uninstalled the secureW2, and guess what after the soft Reset, when i hit connect it did ask me Id and Pass.
And Now it connects within two seconds every time I go to school.
Couldn't really figure out How did it worked
Can someone please post a step by step procedure for putting a static IP into
my Tab 500?
instructions for static IP relevant on my tab version, android 3.1 (4.010.11_COM_GEN2):
open up wifi networks and settings. Find your network you wish to connect to and long hold it. Select Modify Network. Select IP Settings drop down and change from DHCP to Static. Scroll down again and type in your own IP addressing schema for the IP address and Gateway. Don't forget to add a network prefix length, even if you simply type in the suggested 24. I recommend using your ISP's DNS servers unless you are trying to use DNS for filtering and protection (such as opendns).
bmathison said:
instructions for static IP relevant on my tab version, android 3.1 (4.010.11_COM_GEN2):
open up wifi networks and settings. Find your network you wish to connect to and long hold it. Select Modify Network. Select IP Settings drop down and change from DHCP to Static. Scroll down again and type in your own IP addressing schema for the IP address and Gateway. Don't forget to add a network prefix length, even if you simply type in the suggested 24. I recommend using your ISP's DNS servers unless you are trying to use DNS for filtering and protection (such as opendns).
Click to expand...
Click to collapse
Thanks for prompt reply. What does 'long hold" mean? My Tab does not ever get
an IP assigned to it by DHCP, so I want to try a static IP to get wi fi working.
I will try your procedure when I get home from work today and will post results.
You're welcome. By long hold, i simply mean to tap the setting and hold it for a moment rather than let go right away. I am sure there is an official term for that, it just escapes me at the moment.
bmathison said:
You're welcome. By long hold, i simply mean to tap the setting and hold it for a moment rather than let go right away. I am sure there is an official term for that, it just escapes me at the moment.
Click to expand...
Click to collapse
Thanks again. I'll try a Factory Reset first. Then, if that doesn't work, I will try a static IP address.
Problem solved. Static IP not required.
I tried the Factory Reset from the settings menu. It took a few minutes to reset and reboot. A s soon as I went to the Wi-Fi settings, it found my router, got great signal strength, and was asked for my password. It then connected immediately.
I then went to settings, and looked for any updates. It found the latest update, so I downloaded and installed OS v3.1. It took about 1 hour to complete the download and installation. My tab works great now. I could not be more pleased with it.
Many thanks to all on this forum and elsewhere who contributed their suggestions and advice.