VPN connectivity problem - password? - Networking

Hi, I have tried a search on this topic but not found any relevant discussions.
I am using a Qtek 2020 in France with SFR as my GPRS provider.
I have been trying to connect to my work VPN using the IP address, username and password I use on my desktop and pptp as the VPN type, however every time I try and connect the operation times out and asks me to check my username and password.
When I review these details I have noticed that my 12 character password defaults to a 16 character password every time, of course I cannot see what the password has defaulted to as it comprises of ***'s and is non-copy-able.
Is this normal behaviour and the problem lies elsewhere or is this a known fault?
Thanks for any help regarding this matter.
PS - should I eventually manage to connect to my VPN can you offer any advice on how to map a network drive on my Qtek or any way to access the files on the remote server?

Related

IE Username/Passwords

I was having a play with my new SD WiFi card, and was accessing my D-Link routers configuration application which was at IP 192.168.0.11.
I was presented with the login dialog in which I enetered the admin username and password and checked the option to save password, however, the login was obvisouly incorrect and I got a 401 Authorization Required returned.
No whenever I go to my router I get the same 401. I have tried a softreset, changing the IP of the router, changing the login details on the router and everything. I have cleared cookies and temporary internet files.
I used to be able to view the application fine before I checked the save password option.
Can anybody advise of how to get around this problem? Is there a DB I can delete something from and how???
Cheers,
Dave
Do you must enter in the router system io in internet? if you want to go in internet you don't must enter the router password!
Is the Domain empty?
Cheers tuitt,
I got some help from MattM at http://www.Mtekk.com.au and managed to get around the problem by deleting the the DLink password from the registry.
Take a look at http://www.mtekk.com.au/forums/viewtopic.php?p=6244#6244 for more info.
Dave

Proxy Settings MIA

Help...
I have a HTC 3600 (handy as I'm posting in this forum ) and I have been trying to connect it to my work wireless setup. This is fairly locked down and has a hidden SSID and requires me to enter credentials (user name, password) to access the web. I can successfully connect to the Wi-Fi, I am issued with IP address etc but can't then take the next step to connect it to the web.
I have found an area to add a proxy with username and password - I do this but still nothing. One odd thing is that when I then go back to try editing the proxy settings 9 times out of 10 it has vanished and I have to create it again!!
This is causing much hair pulling!
Any direction/help in this would be great as I am now a little stuck.
I am on AX3L v3.0.9 build.
Cheers
Update
I have found out that if there are two settings in the connections summary - such as 'My Work Network' and in my case 'etisalat UAE' the proxy setting never gets lost. Is this a quirk, is there something that I am not understanding (I know the obv. answer to the last question is yes!)
This now brings me to my nest challenge which is how do you arrange these connections? What I mean is that if I am at work/home and have a wi-fi link active how do I get the device to pick this in preference to a GPRS connection which it should use at all other times? I have tried looking for some kind of guide so I can work through this my self but no luck so far..... if anyone knows of such a thing or can point me in the right direction then please reply to this.
Cheers

[SOLVED] WiFi Certificate Issue

I have a major issue with my college WiFi network, I can join from every OS, but not from WM (even Symbian can do it!)
My university uses a certificate-based wpa-tkip, I have installed the certificate on my Touch Pro, but I can't login...
More details can be found @
http://www.asi.polimi.it/rete/wifi/istruzioni/Servizio Wireless - Guida Utente.pdf
http://www.asi.polimi.it/rete/wifi/istruzioni/Istruzioni WiFi Linux v1.0.pdf
The language of the guides is Italian, but the images and the scripts are in english, I hope you can help me out with this issue *__*
I even installed Secure2W, but it seem to not work...
SOLUTION @ http://forum.xda-developers.com/showpost.php?p=2815200&postcount=15
Anyone?
I can't really find a solution ç__ç
Same issue here. This connection would be very useful, because the whole campus is covered by wifi and since I spend lots of hour there...
After installing the certificate, while attempting the connection, a further username+domain is required. That does't happen with a pc or a mac.
Some specs about the authentication:
- Auth: WPA
- Encr: TKIP
Certificate:
- Sha1 RSA @ 1024 bit
Did someone succeed in logging into similar networks?
Fulcrum.
Are you using Schaps Advanced config 3.2? If so then you need to make a couple of changes.
619619 said:
I have a major issue with my college WiFi network, I can join from every OS, but not from WM (even Symbian can do it!)
My university uses a certificate-based wpa-tkip, I have installed the certificate on my Touch Pro, but I can't login...
More details can be found @
http://www.asi.polimi.it/rete/wifi/istruzioni/Servizio Wireless - Guida Utente.pdf
http://www.asi.polimi.it/rete/wifi/istruzioni/Istruzioni WiFi Linux v1.0.pdf
The language of the guides is Italian, but the images and the scripts are in english, I hope you can help me out with this issue *__*
I even installed Secure2W, but it seem to not work...
Click to expand...
Click to collapse
leobalou said:
Are you using Schaps Advanced config 3.2? If so then you need to make a couple of changes.
Click to expand...
Click to collapse
Do you mean enabling:
# Validate server certificate
# WPA authentication
???
No I mean setting:
Network -> WPA auth... from enabled to Disabled
And Wi-Fi delay after boot: 0
I could not connect - I changed these settings, rebooted and it resolve my problem.
I hope this works for you too.
Fulcrum1 said:
Do you mean enabling:
# Validate server certificate
# WPA authentication
???
Click to expand...
Click to collapse
Ok, I'm gonna try tomorrow morning and I'll report back asap.
Thanks
Thank you, I'm going to try tomorrow too
I hope to reply a success from my Raphael!
Uhhhmm, tried today and nothing happened...
Sometimes it doesn't connect ad sometimes it asks for User+Domain
Fulcrum
Sorry to hear that - it worked for me and others - sorry.
Can anyone else help this guy???
Fulcrum1 said:
Uhhhmm, tried today and nothing happened...
Sometimes it doesn't connect ad sometimes it asks for User+Domain
Fulcrum
Click to expand...
Click to collapse
Fulcrum1 said:
Uhhhmm, tried today and nothing happened...
Sometimes it doesn't connect ad sometimes it asks for User+Domain
Fulcrum
Click to expand...
Click to collapse
The same happens to me
I will try again more combinations tomorrow...
Sorry for the bump, but I think I have found the issue.
When I try to connect to the network and configure the access wm tells me that there is no personal certificate, but I have installed the certificate.
But I noticed that the provider certificate is an Intermediate, not a personal certificate!
So I can't configure anything, nor connect!
There is something wrong with the certificate installation, why it is located in Intermediate and not in Personal?
EDIT: I've renewed my certificate, and now it's in the personal tab, the previous one was without the personal Key, this time must be it
It's a no-go ç__ç
If I choose PEAP autentication the phone locks up and needs a soft-reset when I try to connect
I've solved it!
Now I can successfully connect to the WiFi Area!
A tutorial is on the way
Here I am, sorry for the long delay.
I solved my problem following this procedure:
Install the certificate on your device (The certificate must have the user key emended)
You must edit this registry key: HKLM\Comm\EAP\Extension\25\ValdateServerCert change it to 0
Reboot your device
Now you can create your network settings, for my network I had to set:
Network name: The network SSID
This is a Hidden network: True
Autentication: WPA
Data Encryption: TKIP
EAP Type: PEAP (Select your certificate from the list)
That's it, now it should work, or at least it's working on my network
Hi!
u have a little typo in there: its HKLM\Comm\EAP\Extension\25\ValidateServerCert ... and unfortunately this solution does only prevent WM to check for a serverside Certificate but does NOT solve the bug with the configuraton - popup:
o When coming to the page where u can change the auth method from certificates to PEAP, then the popup will nag us. No chance to get into the peap config to set MsChap V2 for example. We *can* prevent the popup by renaming the key for the certificate method HKLM\Comm\EAP\Extension\13 to HKLM\Comm\EAP\Extension\130 for example (so the popup is elimanted because then peap has the lower number and is handled first) *but* its still impossible to get into that damn config...
*That* Problem seems to be unsolved so far.. :-(
One of my employees told that he managed to get into the network by simply pressing "ok" at this popup, closing the wizard and when connecting to the network the username / password (mschap v2) Dialogue came -> and he was online. But unfortunately this was un-reproduceable
Any hints highly appreciated (for getting into a secured network by mschapv2 on user/password basis)
Yeah, I'm having the same problem as well...
I tried to follow the intructions to log on the wireless network available at the hospital I work, but these instructions are for desktop computers and notebooks and they have steps that I can't accomplish in my blackstone. The instructions are the following (for windows XP):
-add a new network with the name: wifiuel
-choose WPA2 autentication
-choose AES cryptography
-choose PEAP access, go to properties and uncheck all options. Also, at autentication method EAP-MSCHAPv2, click on configure and uncheck the option to use the logon's name and password automaticly.
There are a few more steps, but from this last one I can´t go on. When I tap on the properties buton on my blackstone, I get the following warning: "Cannot log on to the wireless network. This network requires a personal certificate to positively identify you."
I've tried to make the registry tweaks available in this post, but I still can't connect. The network manager says I´m connected but at the same time, the little locker icon is also shown in front of the network's name and I just can't access any website.
The real thing is, as licht77 said, I can get rid of the WM checks for a serverside Certificate but it does NOT solve the bug with the configuraton, as I still can't get into the peap config to set MsChap V2.
Can anybody help us?
Same on My Rhodium TP2
My University settings are:
SSID: 4csuuseonly (visible)
Security: WEP-enterprise
Encription: TKIP
cert: PEAP
than i have to put Username and Password; but i could never get to that step.
It did worked couple of time for me,
What I did was I created a LEAP in wifi settings with SSID, USERID and PassWord
then I enter the SERVER ,ID n Password Under "Enroll" tab in wifi settings
It did work few times; I don't know if that may help
We all Need a Solid Solution
Edit: I tried SecureW2 software to connect , Played with the software for two days. Did the reg hack, didn't help either.
Finally I uninstalled the secureW2, and guess what after the soft Reset, when i hit connect it did ask me Id and Pass.
And Now it connects within two seconds every time I go to school.
Couldn't really figure out How did it worked

[solved] VPN Activesync exchange over G/3G/H issue

Hi there
pleases can someone help as i cannot sync with my exchange server via vpn over G/3G/H connection but can over wifi.
i have a blackstone with wm6.1
if i use my blackstone as internet hub for laptop i can sync my outlook over vpn fine.
the only vpn setting in my blackstone are the server name & logon details.
then in the exceptions i have added my domain, & like i said it works on any wifi.
please save me from going even balder.
i have had a search through the forums & dont think that its a device specific issue.
hello any one there!
surley someone has had this issue before
SOLVED
as nobody answered me I did some more digging on google & found that i have to set up a new apn called mylan2 with vodafone uk due to there ip range being the same as my works network.
settings
This applies to vodafone UK & is free if you already have internet enabled on your contract :-
standard apn internet user/pass web ip range 10.xx.xx.xx
mylan apn mylan user/pass mylan ip range 10.xx.xx.xx
mylan2 apn mylan2 user/pass mylan2 ip range 172.xx.xx.xx
hope this can help someone else out there.

APN and dynamic password (expires in one minute)

Hi all,
currently I'm using the "internet sharing" feature to use my phome wm 6.5 as bluethoot modem to connect internet
Now I want to connect my company network using a private apn which require a dynamic password provided by a token.
There is no any way to provide the password directly using the computer keyboard?
Or there is not any other way to configure in a easy way this connection each time?
Seem impossible to put the password in the connection settings, launch the internet sharing and set up the bluetooth connection in one minute!
Thanks in advance
Stefano

Categories

Resources