Hello,
I know that I should'nt have do that, but I need your help.
I upgrade my MDA on the following state :
Rom : 4.01.16 Eng
RSU : 4.21.00
For buisness reson I have to go back to the original state.
Rom : 3.18.01 ENG
RSU : 3.23.00
Unfortunatly I didn't do a Backup
I have acces to some MDA with the originale rom and rsu
My question is how to go back to the originale state, without destroying the other mda with the originale rom? via bootloader?
Thanks in advance
The ROM part is easy, you can get the original 3.18 ENG from the carrier devices site http://www.carrierdevices.com.au/downloads.php?region=Asia Pacific
The RSU might be your nightmare especially that you have 4.21 which showed to be the pain for most people here ... anyway, in the same site you will find RSU 3.25 for Qtek ... it's almost the same as 3.23.
Good luck
Biso007 Thanks for you answer,
I look at your link but it seems to be the Qteck version, I really need the officiale t-mobile version.
Is there any way to save the originale one in one of the other phone that I have access and restore to my one?
Biso: Is the rom found in http://www.carrierdevices.com.au/downloads.php?region=Asia Pacific WM2003? What radio version it contain? Is it compatible with PW10B1 device?
I'm now running T-Mobile ROM 4.01.16 ENG, Radio 6.25.02. I'm plannning to change the Radio to be compatible with Asia-Pacific and in the US (I've been going to Asia and back to the States for business, so I want a device compatible with both Asia-Pacific and US). Thanks
ok I Download the old version on a new phone via OSimagetool to my sd card and put it on my device. working perfectly.
So now I just have to downgrade the radio stack to 3.23.00, where I can find it and how to downgrade?
I download the file here
http://www.t-mobile.at/business/mobiles_arbeiten/MDA/SWupdates/
Looks like it's working, (at least I have the right number at startup)
the only problems that I had it's that rhe rsupgrade was lauch every time I startup, I had to delete the file rsupgrade on startup folder. now it's working like before.
Thanks a lot.
By the way, does it exist a solution in mda to copy contact name to the sim card?
pjfuerte said:
Biso: Is the rom found in http://www.carrierdevices.com.au/downloads.php?region=Asia Pacific WM2003? What radio version it contain? Is it compatible with PW10B1 device?
I'm now running T-Mobile ROM 4.01.16 ENG, Radio 6.25.02. I'm plannning to change the Radio to be compatible with Asia-Pacific and in the US (I've been going to Asia and back to the States for business, so I want a device compatible with both Asia-Pacific and US). Thanks
Click to expand...
Click to collapse
No, it's PPC2002 and the RSU is 3.25 for PW10A devices (900/1800). I know it coz it was on my device before I replace the mother board with a B-type one.
If you are going to use 900 MHs network in Asia you can keep your current RSU ... I have it on my device and my network is 900/1800 ... other than this you better use 2 phones or get a new XDA II
sebs said:
By the way, does it exist a solution in mda to copy contact name to the sim card?
Click to expand...
Click to collapse
Dealing with the SIM book is a matter of s/w and the device type (XDA or MDA or ... ) has nothing to do with it. You can find many freeware s/w to deal with the SIM entries.
ok thanks a lot, do you just have the name of one of this freeware?
try this http://www.pocketgear.com/software_detail.asp?id=7496
don't work for me
Requirements: Pocket PC 2002("Not Microsoft Phone Edition or Pocket PC 2000)
Click to expand...
Click to collapse
always looking for gsm phone.
Say choose flexport extra if you have running voice gsm installed on this device, but i dont have the option.
Related
Hi everyone.
I had big troubles when I put the official TM rom on my Qtek 1010 as I could not change my rom again and I did not like the TM rom as it had so much crap that seemed stupid if you were not with TMobile, as I am with Vodafone Australia.
I tried everything to finally after every test got some luck, I will try to explain.
Grab the official TM2003 download which has the radio update as well and extract the file, Run the TMO2003.exe and it will install the program to your computer. Do Not install anything to your phone yet. Then go to C:\program files\RUU and grab the file "ENGLISH" and cut and paste to your "desk top". Now I had a cooked rom 4.00.10 from the kitchen that would not load. But if I extracted file and cut and pasted the "english" file from the cooked rom into the C:\program files\RUU where I removed the original file and put on desk top. Then run the Upgrade.exe file in C:\program files\RUU and it will install the cooked rom....as well as the TM radio. I then just installed the radio 4.21 to give me the radio I needed for Australian Vodafone.
Now the tricky part........... :idea: :shock:
To get the Upgrade.exe to run and find the device I had to put the phone in the cradle, wait till it synced with the pc, then turn off the phone and then turn it back on again as soon as you hear the sync noise then run the Upgrade.exe and then it seems to find the device.
This all seems very strange but it worked for me. As I only have an SD
card of 15MB so I can not do the SD card method.
I am downloading a cooked rom 4.00.05 and I will try to load that and will let you know if it works.....
Hope this is of some help to someone.....
I totally mislead you all...... :shock: :roll: :roll:
do not replace the file "english" replace the "NK.nbf" file.....
Sorry
Just tryed the same procedure with a cooked rom 4.00.05 and it fully worked.....Love it.
Note I got a warning that I was upgrading to the wrong version so I left the original TM2003 in tact untill it got to the verify your rom upgrade page then I swaped the "NK.nbf" file.....
Hi Ya Seal, fellow Aussie here.
Thanks for the tips.
Can you tell me what the original model of your qtek was before all your upgrades. IE. on the back of the unit should be a number like PW10a1 or PW10b1
I have a T-mobile PW10b1 (US model) and im not sure if i need to upgrade the radio stack for Australia.
I have read here in these forums that upgrading to the incorrect radio ver can permanently stuff the radio section.
specs.
T-Mobile PW10b1
rom 3.08.10 eng
radio 6.02
Hi
Hi LeapingLee
My Qtek 1010 is PW10A1
I have radio 4.21
I went back to PPC 2002 as I use the vodafone sim banking software and 2003 does not work with it, pitty as I love PPC 2003.
Hi Guys,
I'm in Melbourne, running a o2 XDA that i bought back from the UK. Running Radio 4.21 with PPC v4.20.1081 (build 13100).
Using it on both Vodafone and Telstra networks without problem. Mind you haven't been using GPRS since i got back.
Hello folks,
QTEK 1010 bought from Dubai
Model PW10A1
ROM version 3.16.52 ENG
ROM Date 03/10/03
Radio version 3.19.01
Protocol version 32S54
My questions: -
For me, which is a suitable upgrade...
From www.myxda.com:-
ROM version 3.20.06
Radio version 4.21
OR
From www.carrierdevices.com.au:-
CE Upgrade File : RUU_CEv3.18.04wwe_Qtek_SHIP.exe
Radio Upgrade File : RSUv1.15_(GPRS_T32500_ENG).exe]
Thanks
Faisal
Re: Which is a recent / suitable ROM and Radio upgrade for Q
faisal said:
Hello folks,
QTEK 1010 bought from Dubai
Model PW10A1
ROM version 3.16.52 ENG
ROM Date 03/10/03
Radio version 3.19.01
Protocol version 32S54
My questions: -
For me, which is a suitable upgrade...
From www.myxda.com:-
ROM version 3.20.06
Radio version 4.21
OR
From www.carrierdevices.com.au:-
CE Upgrade File : RUU_CEv3.18.04wwe_Qtek_SHIP.exe
Radio Upgrade File : RSUv1.15_(GPRS_T32500_ENG).exe]
Thanks
Faisal
Click to expand...
Click to collapse
You may use any ROM Updgrade, you may even want to cook your own ROM, but please do not think of performing a radio stack upgrade if your present radio is working well and giving you a trouble free service.
Hi guys,
I 'm in same situation but with higher versions, and can hardly wait to get a new 2003 ROM.
I can't just play with my XDA as I use it all the time for work and it's pretty stable so far. I just also can't tell that the ROM is 'totally' separate from the RUU in WM2003.
So the question is: is there any one here who has gone through a 2003 upgrade for Qtek 1010 to tell us his thoughts after the upgrade ?
I read a lot about the stability of 4.00.16 ENG, but all been written was for O2 R4.21 or T-Mobile R6.xx. Did any one in this region (Mid East) with R 3.2x went into this upgrade ? and what is the current status ?
Thanx all ....
Latest ...
I tried upgrading to 4.00.11 ENG from the kitchen ... no matter how many trys it just restarts and gives the same error message "Can't open USB/com port ..." ...
Do I miss anything ??
more update ...
Tried to cook the new ROM as .nb1 file and used Xdatools from the kitchen to flash my device .... same result :? :evil:
Is it possible that there is a ROM protection on my XDA ??? :shock:
Biso007 said:
more update ...
Tried to cook the new ROM as .nb1 file and used Xdatools from the kitchen to flash my device .... same result :? :evil:
Is it possible that there is a ROM protection on my XDA ??? :shock:
Click to expand...
Click to collapse
Hi Biso007,
Look at the IDIOTS GUIDE at:
http://www.xda-developers.com/forum/viewtopic.php?t=3171
and follow the instructions thoroughly one by one and you can't go wrong, it did work for me, I was in the same situation.
Samohile - Thanks. It is good advice to not mess with the radio if you can help it.
My only problem is that my device periodically shuts off. Then pressing the power button soft boots it. I cant tell for sure but it seems that this happens after an incoming or missed call. It seems that other friends using ROM 3.18.04 and Radio 3.25.01 (like our friend biso007 here) seem to have very stable systems.
I can try upgrading the ROM only and see what happens but the information at www.carrierdevices.com seems to imply that both ought to be upgraded at the same time. I notice it is an Australian site. Does that matter? Also, the version of the radio upgrade is a bit confusing, at least from its name. (Radio Upgrade File : RSUv1.15_(GPRS_T32500_ENG).exe] ). I wonder what this RSUv1.15 translates into since the name of the exe file for the ROM is nicely descriptive of the version (3.18.04).
Any advice in this would be very welcome..
Well i am using WM2003 4.00.11 and its working fine for me no problem i cooked in the kitchen you just need to read arround this great forum for a whgile on topics such as upgrades and ROM to know exactly what you are dealing with and then you will able to upgrade smoothly.
:wink:
Hi ARZLEB
I read lots and lots about upgrade lessons but none of them worked for me .... I got an advice to use SD card with bootloader as it's the only working way. Now I wonder why the EXE method was created!!
I see that u got the 4.00.11 working. Did u upgrade it using EXE or SD card. Any help would be so appreciated ... thnx
Well i used the EXE methode the file i cooked in the Kitchen but i didnt change the version i left as 3 at the bottom of the page it works fine i upgraded from 3.XX to 4.XX then i downgraded from 4.00.11 to 4.00.05 then upgraded again all using EXE format so far working great.
i will be honest with you i know about the SD methode very well but never tried it so u have to make more search on this issue.
If you need anything more plz message me anytime and i will be more then whilling to help you step by step...
faisal said:
Samohile - Thanks. It is good advice to not mess with the radio if you can help it.
My only problem is that my device periodically shuts off. Then pressing the power button soft boots it. I cant tell for sure but it seems that this happens after an incoming or missed call. It seems that other friends using ROM 3.18.04 and Radio 3.25.01 (like our friend biso007 here) seem to have very stable systems.
I can try upgrading the ROM only and see what happens but the information at www.carrierdevices.com seems to imply that both ought to be upgraded at the same time. I notice it is an Australian site. Does that matter? Also, the version of the radio upgrade is a bit confusing, at least from its name. (Radio Upgrade File : RSUv1.15_(GPRS_T32500_ENG).exe] ). I wonder what this RSUv1.15 translates into since the name of the exe file for the ROM is nicely descriptive of the version (3.18.04).
Any advice in this would be very welcome..
Click to expand...
Click to collapse
Faisal sorry for very late reply.
I have flashed my Qtek (bought in Abu Dhabi) with several versions of roms cooked in kitchens (Jeff's and Stefans's), but I have finally settled with ATT release wm2003 Siemens SX56 upgrade. It comes with most of the bugs fixed (except multiple reset bug) and is quite stable. I almost never have to reset it. You can flash the ROM only by SD card method though. You can try it. It's always a good idea to flash using SD card method. USB method using ProgramA is not very safe. I guess the network in Pakistan is compatible with the one in the UAE, so you can safely use it, if you don't mess up with the Radio Stack. My Radio is 3.23.01 and I have no problems with that.
Having problems with Radio Version 4.21 from England, ie the phone will not work (I am in Australia). The phone was working OK until I performed the upgrade
It has been suggested that I install Radio Version 6.12 from T-mobile and I have downloaded the file from Yorch, this comes up as an nbf file and I wonder if I should flash it as I can not find RSUupgrade.exe. Any suggestions ?
Chris
You downloaded the wrong file go back to Yorch's site and look under Upgrades and download "USA T-mobile Latest Radio Stack (Unofficial)
RU 6.24.00".
HTH
dont Australia use 900/1800 like europe ?
if that is the case the us RSU would ruin the phone even more
Rudegar said:
don't Australia use 900/1800 like Europe ?
if that is the case the us RSU would ruin the phone even more
Click to expand...
Click to collapse
You know thats what I thought until I received the below PM:
-------
Radio Stack for Australia
Wed Nov 12, 2003 13:10
Hello Qman,
Thank you for your reply! But great news here as I have managed to get my RSU version to work in Australia.
My carrier is Optus and SIM card is fine.
Basically by trying most RSU versions I wasn’t able to get the phone to work. Funny thing is I tried the RSU version for the O2, which is supporting here in Australia but to no avail! I ended up using the new T- Mobile for the US and works like a dream have fully signal as well.
New version is RSU 6.24.
Cheers Erebus,
-------
HTH
Further to my problems I upgraded to the T-mobile 2003 ROM an their latest Radio stack 6.24 and all is working OK.
I had sent the XDA to Melbourne (Australia) to the accredited Service company (Accord) and they had sent it back saying that it was buggered. I had some very helpful advice from Peter and Joe and have everything working fine. Curiously, when I had XDA 1.2 and the T-mobile Radiostack the phone kept crashing after reboot. Since upgrading to T-Mobile 4.00.21 ENG and Radio version 6.24.00 all works well.
I did try to download some Medical software (MIMS) and thisd has proven to be a bit of a problem. The tech dude at MIMS was not too impressed with Pocket-PC 2003
Chris
Great, glad to hear it all worked out ok! 8)
Seems R 6.24 works in many wheres ... I put it on a friend's XDA and it works now (Egypt 900/1800) ... just wonder if it's wise to go for ROM 4.00.21 or keep the 4.00.11 .... I heared that you can't change the ROM after T-mobile ROMs ... is that true ?
Biso007 said:
Seems R 6.24 works in many wheres ... I put it on a friend's XDA and it works now (Egypt 900/1800) ... just wonder if it's wise to go for ROM 4.00.21 or keep the 4.00.11 .... I heared that you can't change the ROM after T-mobile ROMs ... is that true ?
Click to expand...
Click to collapse
Thats great news on RS 6.24, thanks for the tip!
As far as not being able to change ROM's after upgrading to a T-Mobile WM2003 ROM, it will still work but you must use the SD card boot loader upgrade method.
HTH
Help needed, this morning I flash my XDA with USA T-mobile Latest Radio Stack (Unofficial) but not working for my GSM 900. So I flash it back to O2 Latest Official Radio Stack RU 4.21 but it flash until 83% stop forever. So i do a soft rest. Then my XDA can't boot. Can someone help me out on this method? I'm in Malaysia. Using 900/1800 bandwidth.
Hi ...
If you have taken SD backup before upgrading, then go for bootloader menu, press Calendar button, and turn off the Radio part. Try to flash your XDA back to the original ROM and RSU, and then perform a hard reset.
In case you didn't, try the Qtek offical RSU 3.25 from http://www.carrierdevices.com.au/downloads.php?region=Asia Pacific. It works good for Asian operators.
Good luck
Problem FIXED... Thanks for the big help.
T-Mobile Germany has annouced the release date for the Windows Mobile 2003 ROM for the XDA I as December 29th. Hopefully T-Mobile USA will announce something similar today. :roll:
http://www.t-mobile.de/mda/software/1,5193,7482-_,00.html
But this is only for German Model, isn't it?
hmmmm ... and how about the language version ?!
to me seems like only German is to be available ... too bad
Release date is now beginning January
Hope there will be an update....
Regards
Stefan
aren't we talking about the German version of WM2003 ..
announce/release date or in general WM2003 official release for T-Mobile ??
regards,
monika
http://www.t-mobile.com/promos/ppc2003/
this link was working few weeks ago with information about update but now seems to be dead.... somebody spoke with customer service and they said "in the middle of February" so we will see...
for me 4.01.00 ENG work fine
ps. pozdrawiam rodaczke
well, maybe there has been some minor problems ...
with that ROM release so they've decided to stop distributing for a while, hard to say ...
I presume as official release is hopefully coming with a short notice stick with current version I have
regards,
monika
ps. rowniez witam i pozdrawiam
somebody wrote that 4.01.00 ENG is only good to US tmobile ppc owners because of radio ... I mean only for PW10B1 units ...
I did reflash mine yesterday with this version and I like it so far .... signal indicator doesn't look normal because I dont have signal but my ppc recives calls normally ....
mine XDA is also PW10B1 .... heh
now I know for sure that I have US version, thank you for the tip ...
dziekuje i pozdrawiam,
monika
ps. out of curiosity, have you already get my private message ???
HI Monika,
Where did you get this T-Mobile WM2003 ROM?
Is it English version?
Can it be used in Asia?
Many thanks,
chris_khho said:
HI Monika,
Where did you get this T-Mobile WM2003 ROM?
Is it English version?
Can it be used in Asia?
Many thanks,
Click to expand...
Click to collapse
hello, I got it from http://www.yorch.net/ but I use an US version of XDA, for me it's hard to say whether it suits Asian hardware version, my rough guess is that Radio Stack version shall be different .... unfrtunately I have never came across the Asian hardware version
but before making any upgrades read that forum, e.g.
http://forum.xda-developers.com/viewtopic.php?t=4630
and also the other threads just to double check
regards, monika
Tks Monika,
But I see that you are using WM2003 T-mobile ROM 4.00.21.
From Yorch, 4.00.21 is only nbf file which is not nb1 so that I can't use the SD method for upgrading.
Any hint?
Marcyjok said:
somebody wrote that 4.01.00 ENG is only good to US tmobile ppc owners because of radio ... I mean only for PW10B1 units ...
I did reflash mine yesterday with this version and I like it so far .... signal indicator doesn't look normal because I dont have signal but my ppc recives calls normally ....
Click to expand...
Click to collapse
i have PW10A1 and i installed the v4.01.00 tmobile update i just downloaded an cooked rom from yroches kitchen then unzipped it all and replaced the nbf file from the v4.01 over the cooked rom nbf and flashes it that way works fine on english netowrks and i still have 900/1800 mhz just what ever you do do not go into phone options and click on the band tab if you do you will loose 1800mhz bank and then be on 900/1900 if you do this load up the bootloader click the calendar button and click on gsm 900/1800 and itll say reset or some crap do this then softreset and youll have 900/1800 back again but dont click on the band tab or youll have to do this.
gaz
p.s ive found it to be quite stable so far but seems to run kinda slower then v4.00.11 but it has improved features
hi
few questions
I have US tmobile Pocket PC Phone so it is type B so I flashed with no problem with 4.01.00 (RUUv2.04b_CEv4.01.00wwe_VS_Ozone_Test_(Integrate_Radio_6.24.01).exe) so I think that this soft will work fine with Monika's XDA if it is American....
Monika your XDA is from AT&T ? or TMobile ?
Is it ok to use it with European PW10A1 ?
gaz do you have exactly same ROM as I have ? (check my signature)
and this problem with band tab is only one ?
do you see TMobile logo when U do a soft reset?
Anybody use this soft ver. in Europe?
i use 4.01.00 with asian radio stack 4.21.01 with no problem
i used flash method when upgrading the rom
i unzip the exe file, took the .nbf file and write it to my sd card using OSImageTool and boot my xda with the SD card... 5 minutes later my XDA is running WM2003 with the latest ROM version :lol:
for asian users, do not open the band tab... if you do that, you have to go to bootloader and choose band 900/1800 to make your xda work again
Marcyjok said:
hi
few questions
I have US tmobile Pocket PC Phone so it is type B so I flashed with no problem with 4.01.00 (RUUv2.04b_CEv4.01.00wwe_VS_Ozone_Test_(Integrate_Radio_6.24.01).exe) so I think that this soft will work fine with Monika's XDA if it is American....
Monika your XDA is from AT&T ? or TMobile ?
Is it ok to use it with European PW10A1 ?
gaz do you have exactly same ROM as I have ? (check my signature)
and this problem with band tab is only one ?
do you see TMobile logo when U do a soft reset?
Anybody use this soft ver. in Europe?
Click to expand...
Click to collapse
I have an US version of XDA with T-Mobile ROM installed ... and it's T-Mobile ppc pe, radio 4.21.00 and protocolversion 32S54
regards,
monika
Hi Toshiro,
I am a bit confused. The 4.00.21 nbf file from Yorch cannot be used by OSImageTool since I tried that before and confirmed by someone else in this forum. He said only nb1 file can be used for SD method.
Also, where did you get this 4.01.00 ROM?
Thanks v much.
chris_khho said:
Hi Toshiro,
I am a bit confused. The 4.00.21 nbf file from Yorch cannot be used by OSImageTool since I tried that before and confirmed by someone else in this forum. He said only nb1 file can be used for SD method.
Also, where did you get this 4.01.00 ROM?
Thanks v much.
Click to expand...
Click to collapse
Use XDArit.exe insted of the OSImageTool and you can write it to an SD card. www.yorch.net has 2 versions. if the newer one doesn't work, try the older one. I also found I have to unplug my cradle from my computer to get XDArit to work properly.
MrDollyMaker
the best places worth trying
http://forum.xda-developers.com/viewtopic.php?p=21147&highlight=#21147
and also
ftp://tmobile:[email protected]:21
regards, monika
Thanks v much.
But that's integrated with the us radio which is not suitable for me.
Hi people.
I have an ImateJam PM10A that i require help with.
On boot up i notice it says "no GSM" D.1.12.00 WWE
The sys info i get from device information is:
ROM Version 1.12.00 WWE
ROM Date 05/28/05
Radio version BLANK
Ext rom version 1.12.119 WWE
As a result no GSM whatsoever.
Hope you guys can help me ?
Kind regards,
Mitch.
did you do anything to your jam before this happened? i dont know too much about this stuff but i would say reinstall the rom, heres what clubimate has to say about pm10a rom upgrades:
If the model number indicates PM10A, then the customer should upgrade with the Generic Worldwide English ROM Build. You will not be able to install the North American JAM (850) ROM. This WWE build does not include the connection settings for the US operators found in the North American build, though these are all available to download separately from club i-mate™.
Hi..
Ur r seeing no GSM on boot because radio is missing,meaning no phone,just the PDA...
U just have to reflash radio,and for doing that:
go to the ftp from here,download MAupgradeUt_noID.exe,and a radio ROM of ur liking(1.12 is preferable,it is radio_.nbf file),put the 2 files in 1 folder,remember to also put RUU.dll in it,enter ur phone in bootloader mode by pressing power button,camera and reset(i guess,it's been a while since I have'nt reflashed a Magician :wink:,anyway make sure by reading the wiki page from here),then run MAupgradeUt_noID.exe,and follow on screen procedures...
Good luck...
RAGO :lol:
Tried an upgrade to the latest UK wwe full image using MAupgradeUt_noID.exe and also the latest radio rom.
whilst the upgrades complete ok the radio version and protocol version still remain blank??
any ideas on what the generic world wide flash file is called and i will give it a go.
mitchtech said:
Hi people.
I have an ImateJam PM10A that i require help with.
On boot up i notice it says "no GSM" D.1.12.00 WWE
The sys info i get from device information is:
ROM Version 1.12.00 WWE
ROM Date 05/28/05
Radio version BLANK
Ext rom version 1.12.119 WWE
As a result no GSM whatsoever.
Hope you guys can help me ?
Kind regards,
Mitch.
Click to expand...
Click to collapse
Hi, what happen ur imatejam before, In my experience, last time due to I updated the the firmware via SD method, finally after boot same as ur metioned situation. I bring it to service center, service cneter said that is mainboard problem, and they replaced a new mainboard for my O2 mini(imatejam) and upgrade the boot loader to v1.02. Try bring it to service centre to checking it.
Regards,
mmgrilmm
need a shipped ROM for a MDA Compact PM10A, T-Mobile, english
guys, please help me with this, it's urgent for me! if you have it, put it on ftp://ftp.xda-developers.com/Magician/Shipped_ROMS
Thanx!