Database Users

QTEK ROM Upgrade / Urgent

Updated rom's to version Radio 4.16 and Rom 3.15.15
URL: http://julia.online.o2.nl/xda_downloads/xda_software1/RUU_ENG.exe = ROM upgrade
URL: http://julia.online.o2.nl/xda_downloads/xda_software1/RSU_ENG.exe = RADIO upgrade
Hello i was wondering if the above ROM updates will work on my QTEK 1010:
ROM Version: 3.16.13 ENG
Radio Version: 3.19.01
I mean anyone tested if before or managed to upgrade his QTEK with the above ROM versions from O2 and were there any complications!!
:?: :?: :? :?: :?:
Thanks

Yes I did and it worked fine. I have it running on T-Mobile MDA, Qtek 1010 and Eurotel dataphone (rebranded Qtek). No problems.

I tried to upgrade and got the following error:
----------------------------------------------------------------------------------
The ROM Image that you are trying to upgrade is not compatible to your pocket pc.
Here are there differences:
Your device information:
ModelW10A:007
ROM Version: 3.16
Language: English
Your upgraded image information
ModelW10A:001
ROM Version: 3.15
Language: English
Please download the compatible utility and try again
-----------------------------------------------------------------------------
So where is the problem?
Thanks
nanis

It has been answered a few times, look through fora. it's a general pocket pc language change question, but applies to this one too. You need to rewrite the ROM header to match your device. Can be sort of tricky if you don't know what you're doing.

Did you install it
I have the same qtek with 3.16 and 3.19 shall I do it or wait to uk version?

If you don't mind O2 startup screen & O2 autoconfig...

supplier or distributor
nanis said:
I tried to upgrade and got the following error:
----------------------------------------------------------------------------------
The ROM Image that you are trying to upgrade is not compatible to your pocket pc.
Here are there differences:
Your device information:
ModelW10A:007
ROM Version: 3.16
Language: English
Your upgraded image information
ModelW10A:001
ROM Version: 3.15
Language: English
Please download the compatible utility and try again
-----------------------------------------------------------------------------
So where is the problem?
Thanks
nanis
Click to expand...
Click to collapse
Hi,
My advise to you is to try to get the latest rom upgrade from
either your supplier or distributors.
Also be very wary and careful when you got advice from this
forum on where or which website to download etc especially the
one which you do not have any informations if it suit your device
or not. If it is not suitable then after downloading it to your device
it will freeze up and you have to get it replaced. These people who
give advise take for granted everyone who view this forum are
professional like them. They never realise there are lots of new
users of the device that are trying to find out more informations.
Sometimes no warning was given to you when they just give you
the website to download etc.. I am one of those new user and also
I believe one of the victims too. I do support their intetests in this
forum but not the way some of the advise are given. Hope they
got the message. So good luck to you and happy upgrading.

Why on earth would you want to go from 3.16/3.19 to 3.15/4.16? Makes no sense to me...

bamse: because it's better

I'am used xda radio upgrade 4.16.00 with qtek
it is fine

Which is a recent / suitable ROM and Radio upgrade for QTEK

Hello folks,
QTEK 1010 bought from Dubai
Model PW10A1
ROM version 3.16.52 ENG
ROM Date 03/10/03
Radio version 3.19.01
Protocol version 32S54
My questions: -
For me, which is a suitable upgrade...
From www.myxda.com:-
ROM version 3.20.06
Radio version 4.21
OR
From www.carrierdevices.com.au:-
CE Upgrade File : RUU_CEv3.18.04wwe_Qtek_SHIP.exe
Radio Upgrade File : RSUv1.15_(GPRS_T32500_ENG).exe]
Thanks
Faisal

Re: Which is a recent / suitable ROM and Radio upgrade for Q
faisal said:
Hello folks,
QTEK 1010 bought from Dubai
Model PW10A1
ROM version 3.16.52 ENG
ROM Date 03/10/03
Radio version 3.19.01
Protocol version 32S54
My questions: -
For me, which is a suitable upgrade...
From www.myxda.com:-
ROM version 3.20.06
Radio version 4.21
OR
From www.carrierdevices.com.au:-
CE Upgrade File : RUU_CEv3.18.04wwe_Qtek_SHIP.exe
Radio Upgrade File : RSUv1.15_(GPRS_T32500_ENG).exe]
Thanks
Faisal
Click to expand...
Click to collapse
You may use any ROM Updgrade, you may even want to cook your own ROM, but please do not think of performing a radio stack upgrade if your present radio is working well and giving you a trouble free service.

Hi guys,
I 'm in same situation but with higher versions, and can hardly wait to get a new 2003 ROM.
I can't just play with my XDA as I use it all the time for work and it's pretty stable so far. I just also can't tell that the ROM is 'totally' separate from the RUU in WM2003.
So the question is: is there any one here who has gone through a 2003 upgrade for Qtek 1010 to tell us his thoughts after the upgrade ?
I read a lot about the stability of 4.00.16 ENG, but all been written was for O2 R4.21 or T-Mobile R6.xx. Did any one in this region (Mid East) with R 3.2x went into this upgrade ? and what is the current status ?
Thanx all ....

Latest ...
I tried upgrading to 4.00.11 ENG from the kitchen ... no matter how many trys it just restarts and gives the same error message "Can't open USB/com port ..." ...
Do I miss anything ??

more update ...
Tried to cook the new ROM as .nb1 file and used Xdatools from the kitchen to flash my device .... same result :? :evil:
Is it possible that there is a ROM protection on my XDA ??? :shock:

Biso007 said:
more update ...
Tried to cook the new ROM as .nb1 file and used Xdatools from the kitchen to flash my device .... same result :? :evil:
Is it possible that there is a ROM protection on my XDA ??? :shock:
Click to expand...
Click to collapse
Hi Biso007,
Look at the IDIOTS GUIDE at:
http://www.xda-developers.com/forum/viewtopic.php?t=3171
and follow the instructions thoroughly one by one and you can't go wrong, it did work for me, I was in the same situation.

Samohile - Thanks. It is good advice to not mess with the radio if you can help it.
My only problem is that my device periodically shuts off. Then pressing the power button soft boots it. I cant tell for sure but it seems that this happens after an incoming or missed call. It seems that other friends using ROM 3.18.04 and Radio 3.25.01 (like our friend biso007 here) seem to have very stable systems.
I can try upgrading the ROM only and see what happens but the information at www.carrierdevices.com seems to imply that both ought to be upgraded at the same time. I notice it is an Australian site. Does that matter? Also, the version of the radio upgrade is a bit confusing, at least from its name. (Radio Upgrade File : RSUv1.15_(GPRS_T32500_ENG).exe] ). I wonder what this RSUv1.15 translates into since the name of the exe file for the ROM is nicely descriptive of the version (3.18.04).
Any advice in this would be very welcome..

Well i am using WM2003 4.00.11 and its working fine for me no problem i cooked in the kitchen you just need to read arround this great forum for a whgile on topics such as upgrades and ROM to know exactly what you are dealing with and then you will able to upgrade smoothly.
:wink:

Hi ARZLEB
I read lots and lots about upgrade lessons but none of them worked for me .... I got an advice to use SD card with bootloader as it's the only working way. Now I wonder why the EXE method was created!!
I see that u got the 4.00.11 working. Did u upgrade it using EXE or SD card. Any help would be so appreciated ... thnx

Well i used the EXE methode the file i cooked in the Kitchen but i didnt change the version i left as 3 at the bottom of the page it works fine i upgraded from 3.XX to 4.XX then i downgraded from 4.00.11 to 4.00.05 then upgraded again all using EXE format so far working great.
i will be honest with you i know about the SD methode very well but never tried it so u have to make more search on this issue.
If you need anything more plz message me anytime and i will be more then whilling to help you step by step...

faisal said:
Samohile - Thanks. It is good advice to not mess with the radio if you can help it.
My only problem is that my device periodically shuts off. Then pressing the power button soft boots it. I cant tell for sure but it seems that this happens after an incoming or missed call. It seems that other friends using ROM 3.18.04 and Radio 3.25.01 (like our friend biso007 here) seem to have very stable systems.
I can try upgrading the ROM only and see what happens but the information at www.carrierdevices.com seems to imply that both ought to be upgraded at the same time. I notice it is an Australian site. Does that matter? Also, the version of the radio upgrade is a bit confusing, at least from its name. (Radio Upgrade File : RSUv1.15_(GPRS_T32500_ENG).exe] ). I wonder what this RSUv1.15 translates into since the name of the exe file for the ROM is nicely descriptive of the version (3.18.04).
Any advice in this would be very welcome..
Click to expand...
Click to collapse
Faisal sorry for very late reply.
I have flashed my Qtek (bought in Abu Dhabi) with several versions of roms cooked in kitchens (Jeff's and Stefans's), but I have finally settled with ATT release wm2003 Siemens SX56 upgrade. It comes with most of the bugs fixed (except multiple reset bug) and is quite stable. I almost never have to reset it. You can flash the ROM only by SD card method though. You can try it. It's always a good idea to flash using SD card method. USB method using ProgramA is not very safe. I guess the network in Pakistan is compatible with the one in the UAE, so you can safely use it, if you don't mess up with the Radio Stack. My Radio is 3.23.01 and I have no problems with that.

How can I restore my system to the original states

Hello,
I know that I should'nt have do that, but I need your help.
I upgrade my MDA on the following state :
Rom : 4.01.16 Eng
RSU : 4.21.00
For buisness reson I have to go back to the original state.
Rom : 3.18.01 ENG
RSU : 3.23.00
Unfortunatly I didn't do a Backup
I have acces to some MDA with the originale rom and rsu
My question is how to go back to the originale state, without destroying the other mda with the originale rom? via bootloader?
Thanks in advance

The ROM part is easy, you can get the original 3.18 ENG from the carrier devices site http://www.carrierdevices.com.au/downloads.php?region=Asia Pacific
The RSU might be your nightmare especially that you have 4.21 which showed to be the pain for most people here ... anyway, in the same site you will find RSU 3.25 for Qtek ... it's almost the same as 3.23.
Good luck

Biso007 Thanks for you answer,
I look at your link but it seems to be the Qteck version, I really need the officiale t-mobile version.
Is there any way to save the originale one in one of the other phone that I have access and restore to my one?

Biso: Is the rom found in http://www.carrierdevices.com.au/downloads.php?region=Asia Pacific WM2003? What radio version it contain? Is it compatible with PW10B1 device?
I'm now running T-Mobile ROM 4.01.16 ENG, Radio 6.25.02. I'm plannning to change the Radio to be compatible with Asia-Pacific and in the US (I've been going to Asia and back to the States for business, so I want a device compatible with both Asia-Pacific and US). Thanks

ok I Download the old version on a new phone via OSimagetool to my sd card and put it on my device. working perfectly.
So now I just have to downgrade the radio stack to 3.23.00, where I can find it and how to downgrade?

I download the file here
http://www.t-mobile.at/business/mobiles_arbeiten/MDA/SWupdates/
Looks like it's working, (at least I have the right number at startup)
the only problems that I had it's that rhe rsupgrade was lauch every time I startup, I had to delete the file rsupgrade on startup folder. now it's working like before.
Thanks a lot.

By the way, does it exist a solution in mda to copy contact name to the sim card?

pjfuerte said:
Biso: Is the rom found in http://www.carrierdevices.com.au/downloads.php?region=Asia Pacific WM2003? What radio version it contain? Is it compatible with PW10B1 device?
I'm now running T-Mobile ROM 4.01.16 ENG, Radio 6.25.02. I'm plannning to change the Radio to be compatible with Asia-Pacific and in the US (I've been going to Asia and back to the States for business, so I want a device compatible with both Asia-Pacific and US). Thanks
Click to expand...
Click to collapse
No, it's PPC2002 and the RSU is 3.25 for PW10A devices (900/1800). I know it coz it was on my device before I replace the mother board with a B-type one.
If you are going to use 900 MHs network in Asia you can keep your current RSU ... I have it on my device and my network is 900/1800 ... other than this you better use 2 phones or get a new XDA II

sebs said:
By the way, does it exist a solution in mda to copy contact name to the sim card?
Click to expand...
Click to collapse
Dealing with the SIM book is a matter of s/w and the device type (XDA or MDA or ... ) has nothing to do with it. You can find many freeware s/w to deal with the SIM entries.

ok thanks a lot, do you just have the name of one of this freeware?

try this http://www.pocketgear.com/software_detail.asp?id=7496

don't work for me
Requirements: Pocket PC 2002("Not Microsoft Phone Edition or Pocket PC 2000)
Click to expand...
Click to collapse
always looking for gsm phone.
Say choose flexport extra if you have running voice gsm installed on this device, but i dont have the option.

Qtek s200 french rom ----> Qtek s200 rom WWE ?!?

Hello,
I have just recieved my new qtek s200 with this french rom:
ROM version: 2.9.7.33 FRE
ROM date: 14/2/06
Radio version: 02.07.20
Protocol version: 413.1.03
ext ROM version: 2.9.7.116
Can i upgrade to this qtek WWE rom (RUU_Prophet_2090724_20907106_020720_QtekWWE_Ship)
without unlocking CID first?
Will the new ROM improve the camera function?
thx!
piXie

I have exactly the same version and I am interrested too !
Can you explain me what is WWE and CID?
Thanks a lot !

hi Gazous,
WWE is just... World Wide English ;-) instead of french you will have English.
CID is the vendor lock so you can't install other vendors roms, only roms from qtek in my case.
anyway still waiting for an answer....lol...thats ok i got plenty of time ;-)
cheers
piXie

v2.9.7.116 FR available
Version V2.9.7.116 FR is available on www.smart-phones.be if your have a valid EMEI.
I've tried to install it but after 1%, my pc automatically shutdown.
After that, my QTEK didn't work.
Return to After-Sales services
Another person tried to update and same result...
Daniel

Use NoVendorID reflashing utility and have a ROM of your choice... Search the forum for details...

thx myplate ;-)
my question is still unanswered tho...
Can I install a qtek WWE rom instead of a qtek french rom (my current rom) without unlocking CID or worring that my s200 will die on me?
After all, both roms come from qtek but since one is french version and the other is world wide english version...i'm afraid it will not be compatible...(plz dont tell me i'm a paranoid) lol
Thx again
piXie

omg walker! just saw your post....was it meant for me??
novendorid....is needed only if a different vendor rom is used right??
thx
piXie

ok Walker, lets see if i understood correctly:
1. I have a s200 with a french rom, and i want to change to WWE rom.
2. I downloaded the NoVendorID rom version for the dopod, and extracted it.
3. Should i just run the ROmUpdateUtility and it will install the dopod rom?
4. If yes, what about CID unlocking?? will I be able to install other rom versions later on?
appriciate your help
cheers
piXie

Don't hesitate to read the forum. All the answers are here...
Be sure, all the Prophets are sure identical in hardware. The only difference is the vendor ID and counry ID in the flash. You will newer damage your device, even running ROM for other vendor. My Qtek S200 now has Dopod 2.15 ROM. No problem! You can use WWE or FRA or RUS or CHT ROM and it will work. However, ROM utility won't reflash if it see the vendor is digfferent. One of the good gays has a bit fixed it to make it less strict.
If you afraid of wolves - never go to the forest. If you afraid of consequences - just do nothing forever. If you want to got WWE - just reflash with WWE ROM. Or go to the service and ask the guys to do it for you.
Try first the WWE ROM itself, if it fails with VendorID error - it's possible, run the same with NoVendorID utility. The only one thing to care about - the right ROM. If you try a ROM for 9100 - you will have a problem, but still recoverable, AFAIK. If you do something really stupid, your device becomes a pretty good black toy for kids, just like a real, but don't works ))))
Have a good luck!

lol Walker...you'r always two steps a head of me...

Hi Walker !
your story about the bad wolfes convinced me to go ahead and install ;-)
anyway, it works fine.
thanks a lot
take care
piXie

Enjoy! And have a good luck!

xda2i rom help(andes)

hi i am new to this site i am having xda2i with following confg.
ROM version: 1.11.00 WWE
ROM date: 01/27/05
radio version: 1.00.00
Protocol version :1337.39
ExtRON version 1.11.171
model PH10c
now i have few question
1. i have read that xda2i cant be upgrated to windows 2005 is it true?
2.what is the latest version for xda2i and where i can downloaded it.
3. i have seen many people using radio verion 1.18,1.19 but i am using 1.00 can i upgrade my ROM version of my xda2i and which is the best radio version for xda2i keeping in mind signal reception,battery,voice clarity,bluetooth speed etc
hope i get all my answers
thanx in advance
regards majnnuu

no one to help me??????????????

Here ya go....
1) Correct. You can't upgrade your 2i to WM5.
2) I would recommend downloading one of pug's ROMs. You can find them here: ftp://xda:[email protected]/Alpine/O2_Roms_Camera_Fixed_Bug/
If you hate the o2 active stuff, then download the one marked "o2stripped" (I would recommend this one). If you like the o2 active stuff, then download the other.
3) The latest Radio ROM available for the 2i is version 1.04. If you upgrade your ROM using one of pug's rom, then your radio will automatically be updated to version 1.04.
Justin
BTW, I think your device is an Alpine, not an Andes.

Got a problem I'm hoping someone can help me with.
I was updating my rom and it all went wrong. When I turn my xda2i on now I get the normal setup then its goes to a black screen with serial written on it (or usb if it is in the cradle), and apart from that it does nothing.
My laptop no longer recorgnises the device so I can't restore the old rom or restart the process????
Can anyone help please?

tez,
You're in what is called "Bootloader". You're OK. You can do one of two things:
1) Simply re-attempt to "reflash your ROM" with one of the ROMs you downloaded.
2) Reflash your ROM with a ROM update provided your manufacturer. I couldn't get my device to update with one of pug's rom (it go stuck around 18%) so I had to reflash my Alpine with an original ROM released from a manufacturer.
Hope this helps.
Justin