Need advice please GPS and Headset BT - MDA II, XDA II, 2060 General

Hi all,
My Qtek 2020 is working with a bluespoon BT headset.
I want to use a GPS BT Emtac
Both are known by the PDA but it is impossible ( for me ) to use the GPS
I have all the time error messages like : bad com port, read error, ....
What is the com port I have to choose ?
Is there any conflict with the Headset ?
What is the baud rate ( 4800 ) ?
Is there a specific sequence to do to make the GPS works
MAny thkz in advance

You might want to check out this thread.
http://forum.xda-developers.com/viewtopic.php?t=3341
Or in summary try this...
http://www.angeltowns.com/town/bluetooth/
If you have already installed this, please disregaurd this message.

Related

Please help me , Qtek2020i do not connet with GPS BT-308

Hey , i have a Qtek 2020i with a sony headset and a gps bt-308 both of them BT.
i do not have a problem with the headset it works fine
bu with the gps i have a big problem .
the PPC wont connect to the gps, it does not find it , i can't see it in the BT manager.
i tried everything from Rom updating to BT tools updating
my rom is the latest that i found for qtek 2020i 1.11
also the latest BT tools
i install the GPS cd it hasn't given me anything
i really do not know what to do to fix it.
Please help me fix this problem
Fox2 said:
Hey , i have a Qtek 2020i with a sony headset and a gps bt-308 both of them BT.
i do not have a problem with the headset it works fine
bu with the gps i have a big problem .
the PPC wont connect to the gps, it does not find it , i can't see it in the BT manager.
i tried everything from Rom updating to BT tools updating
my rom is the latest that i found for qtek 2020i 1.11
also the latest BT tools
i install the GPS cd it hasn't given me anything
i really do not know what to do to fix it.
Please help me fix this problem
Click to expand...
Click to collapse
Use com port 6 and try it again
what do you mean use com 6
my inbound is already on com 6??
please explain
Bluetooth manager select "Explore a bluetooth device" it should show up there, then select it, it should display "Slave" device or something similar.
If you need to pair it use the key "0000" (usually works)
If your having problems with TomTom 5 you will need to use the newer 5.10 patch, this fixes the problems where it wouldnt reconise "Other bluetooth devices".
I use COM port 5 with my bluetooth GPS but i guess its not specific.
Also you might want to turn off your bluetooth headset while you get the GPS working as it may want to comunicate on the same port, which if it is the case ... im not sure how you can get both working together.

Bluetooth GPS COM Port problem

Hi, I have a brand new XDA Mini, but with Qtek S100 WWE Rom 1.12, and I bought a Bluetooth GPS, Xaiox NAVOne 2.0...
Bluetooth manager can see the gps without problems, but my Medion2004 Navigation Software says, no GPS is avaiable.
I've already read in the users manual, that GPS needs Com8.
As I see in Start -- Settings -- System -- Bluetooth settings, xda mini has Com5 for outbond port, and Com4 for inbound port.
How can I change ? No program is running, if I check.
Please, help me, thanks.
Nobody has a good idea ? I have already tried the Pocket Bluetooth Tools, it can give a solution, to change COM port 5 to COM port 8, my bluetooth gps requires this port.
BUT, this screenshot appears only a small moment (0,1sec) when I install NAVone2.0 gps...
I installed this gps 100 times, everything is the same.
Can you suggest me another bluetooth tools application?
The problem is simple, to change COM 5 to COM 8.
Thanks in advance.
You could try installing gpsgate from franson
http://franson.com/gpsgate/
change software!
I think you should try change software. I have tomtom 5 to my s100 and it works just fine..

Urgent

hy
i have this problem with my qtek 2020 conected to an gps antena holux gps slim 236 and the problem is like this after installing the GPS viewer ... it is all oki found it on COM 5 speed 38400 but when i go to IGO trying to open the conection manager .. and selecting the com 5 at the same speed ... it does not see any satelits .... no nothing ... i belive thant is a problem with bluetoot com ports ... so please give me an program that alows me to change the GPS antena bluetooth comport
and please don't send me any BlueTootH Tools i have try it and nothing ...
problem solved using bluetooth manager

Universal + BlueTooth GPS problem, help

Dear Htc fellows,
My bluetooth GPS is working strange on my Universal, but on iPaq with
WM2003 works as a charm. The BT GPS is new Solar GPS with new Mediatek
chipset.
It's not working with iGo 2006 and even not Tomtom 5 or Tomtom 6.
I can find the BT GPS in BT manager, I can pair it, but I dont know why,
it needs a pass key even if it shouldn't. Then when I explore it's
services, The popup come again asking me if I will allow external BT
device to connect to my Universal and it come asking passkey again (Why?).
I can't even enter an empty passkey (bt device doesen't require it). After that I have successfully paired the device. I can add it's serial port to enumerate on com ports 8 or 4.
When I start Tomtom, it doesent detect the device at all. If I use iGo, it detects, gets datas and disappear, it's allways appeared for 1 second and then 5 seconds not. No matter Which bitrate I set (device is written to be 9600) it needs to be in NMEA protocol, not SIRF.
When I use some freeware GPS programs, it seams to be working ok, it shows satelites and it's not disappearing.
What can I do with that???
I have some idea that it's probably about WM5 and it's security....
How can I setup com security in registry? can I set the port speads manually atd... I had performed a hard reset and it still don't work. Can ROM update or AKU update help me?
Does anyone have some idea what should I try now?
O2 XDA EXEC:
Rom: 1.30.107
Radio:1.09.00
P:42.42.P8
BT GPS: model: BT 2.5MR
made by f-tech.com.tw
Thanks;
Shef
Could you find a solution??
Hi,
I have the same problem exactly and could not find anything on the net. Did you solve your problem?
well ...
i know that there is a problem with GPS and WM5 and so there is this patch which i install every time i hard reset .....
the guys i bought MY GPS from gave me this ... and they are pretty knowledgable .....
it works well ....
try it !
tried
My OS version is WM2003 but tried anyway.. Did not work.. can there be version for WM2003??
did you ?
did you define an outgoing com port for the device (com 4 for example ?)
com port definition
well, igo finds the device an COM 6 actually, it connects too.. but stays connected just for a second, then again and again..
I installed GPSGate and created a virtual com port 7. I manually configured the GPS receiver connection to COM 7 on igo.. But all the same.. :
do you advice another way?
one other thing the device works with navigon 5.0 and tomtom 6.0 smoothly, no problem.. only igo..
well...
IGO is CRAP ... that is well known .... lots of bugs ...
i am sorry .. i do not know how to solve your problem...
but i suggest using destinator 6 ..... (that's what i use) ....
simple ... nice looking .... big buttons and able to navigate to your contacts directly (especially useful if you have Phone Edition)
oh ... and ... works great !
I got the Holux GPSlim 236 GPS. I can pair the GPS with Universial. But I cannot set the com port at all. A pop up window always say the com port (I tried everyone of the ports) is not available.
Any one got a solution, does the GPS bug fix help ? and what does it fix ?
Might seem a bit obvious, but have you tried the code "0000" when pairing your device?
Once paired...did you define an outgoing serial port on "Bluetooth Settings" menu on your WinCE?
I have a royaltek bluetooth GPS and it's been working well with TomTom[5|6]...I use '0000' as passkey (default on many 'non-interactive' devices), once paired I clicked on 'COM Ports' tab and defined a new outgoing port, the wizard should list the GPS as an available device to create a COM port so I used it and I got a 'com0'.
Once the outgoing port was created I had to tell TomTom to use the new 'com0' and worked like a charm
It's been working since TomTom 5.21 (previous versions didn't work).

Gps Problem

Hi guys, i installed tomtom 7 on my xda mini s and bought a HOLOX bluetooth gps reciever. I paired my xda and gps and ticked the serial port. It would not allow me to create a com port for this device (cant create a com port for any device) It shows COM6 and COM7 but i get the error ' the com port could not be created, please check your settings and try again'. When i open tomtom and try to find the gps on the serial port it doesnt work. The thing is, when i pair it connects to pair then disconnects and i dont know how to connect them again, this bluetooth stack is rubbish in my opinion and i cant find a replacement.
Any help/suggestions would be appreciated
Thanks
hooking the holux
I have a holux and same device.
the only thing you need to know is which virtual COM is the holux device using.
You will be giving this info when you pair the holux (bluetooth).
Fairly simple (at least in my case)
Resolved
Hi, thanks for your post.
I resolved this matter by installing the widcomm bt stack and changing certain registry settings.
It now connects when i switch the holux device on.
Thanks again people
GazzehGNET said:
Hi, thanks for your post.
I resolved this matter by installing the widcomm bt stack and changing certain registry settings.
It now connects when i switch the holux device on.
Thanks again people
Click to expand...
Click to collapse
Hi,
i'm tried to install the widcomm bt stack (v.1.7 test and BroadcomBluetoothStackX51V05).
In both times the volume of the wizard become much down and i't impossible to listen somethings.
The ringtone dont'worls and any file (avi or mp3) dont' listen.
have you fix??
What version have you installed??
Thx
Dansen
Solution for "The COM port could not be created. Please check your settings and try again" in http://yopablo.blogspot.es/

Categories

Resources