Hi , i wonder if any one else notice this but one of the changes they made to XDA II is the Power Plug :x , on the old XDA you can plug that to most of the NEW Nokia Mobiles car charger and it will work with you as a charger and you don't need to spend EXTRA money on buying a new CAR Charger that only work on XDA
But know you can use iPAQ one Not the whole thing, not iPAQ connector, just plug. That's what I am using for my XDA2 as a second power charger
I was wondering if a Sync and Charge cable for the XDA will work on the XDA II?
I didnt want to try it just in case!!
My bro is managing to use most of his original XDA stuff with his XDA II. However, I have a problem with a Boxwave Minisync'n'charge cable that's supposed to be for the XDA II but I suspect is a rebadged XDA 1 cable - it sync's OK from my laptop but won't charge. However, the cable works with their car charger fine, i.e. it charges the XDA II OK ... strange...
Steve.
I think the XDA II needs slightly higher charging voltage than the XDA I in order to charge. It's a happy coincidence that the 5V USB power is sufficient to charge the XDA I; the approved charger has slightly higher voltage but the USB voltage is close enough to charge the XDA I - it 's known to take longer to charge the XDA I via the USB than with a charger. So that's probably why you can sync but not charge the XDA II with the USB cable.
This is a little confusing as my XDA II charges whilst sitting in the cradle WITHOUT the power supply connected, yet won't charge via the Sync'n'Charge cable from the same USB port... Any thoughts?
Steve.
XDA1 cable can be used to sycnh an XDA2 without any problems. It will also charge the XDA2 battery as long as the XDA2 battery has at least %80 or more charge. I bought a new cable today that charges both XDA2 & XDA1. Don't know what the difference is internally but the shopkeeper tells me its to do with pin configuration on the connector. Hope this helps.
I've just tested an old XDA1 USB sync'n'charge lead (the one supplied by O2) on my XDA II and it's charging nicely! I too have heard that it's to do with a sublte difference in the pin connections...
Time to get the multimeter out I think!
steve.
See http://forum.xda-developers.com/viewtopic.php?t=4330
[email protected] seems to have figured it all out! Great work! Mystery revealed.
Thanks for the pointer - it was indeed the GND connections on pins 2&5 on the XDA II connector that were preventing the USB charging behaviour - I took the XDA I lead apart and the connections weren't there, so I clipped them on the new lead (don't you just love voiding the warranty!) and hey presto, the USB lead now charges!
Now all I need to do is check the lead on my car charing adapter...
Steve
Cool! Pity I bought a new charge/synch cable just today. Oh well, I guess I can still solder my old cable and have two! Thanks for the confirmation.
Sync n Charge Cable
Interesting thread, but I have a question...
I have a mini sync-n-charge cable that syncs fine and charges if the battery on the XDAII is not less that 80% - is that the best I can hope for from a charger off a PC's USB port or do I need to get my soldering iron out? I got the impression from the thred that the soldering iron was to cure a sync-n-charge cable that was not charging at all.
I have the Seido GPS ready car mount for my old iPAQ 5550. This connected to my iPAQ via a USB connector about 4" long. The Seido gets power from the car adapter.
I'm not expecting the connector to fit my new XDAII, but am wondering whether a XDAII USB autosync cable will still power (ie charge) my XDAII ?
The USB autosync cable i'm thinking of is this...
http://www.expansys.com/product.asp?code=108732
Thanks in advance
PS does anyone know how long this cable is? IE 10 inches, 25, or 3-4 inches which would be ideal for me
Looking at the ad I would say the answer is no, it seems to e a sync cable rather than a sync/charge cable. You need the latter.
I bought a seidio powered mount for my xda and when I junked it out (for various reasons) I kept the small USB -> XDA cable. It charges my xda II fine from a cigarette lighter adapter.
I used to have an iPAQ H5555 before moving to the XDA II. Funny thing is that the voltage and current ratings of chargers for both units is the same, the USB dongles even LOOK the same but unfortunately the internal USB connections are different.
I bought a Seidio travel charger kit for my iPAQ and am still waiting on feedback from Seidio if they are going to release a XDA II USB dongle so that I can still use the travel pack.
My Compaq/HP in car charger had a removable USB dongle so I am currently using the dongle that came with my XDA II on the end of my Compaq/HP in car charger and it is working fine.
Ed
Have ordered an 8" USB Sync/Charging cable from Seidio...
https://www.seidio-europe.com/ProductDetails.asp?ProductCode=SDCU2O2XDA
Should do the trick (fingers xrossed).
first question : does any one know if i could use the the ipaq dongle with the xda2 for charging
second question : could i use the ipaq synchronizing cable to syn. the xda with pc
NO NO NO !
Do NOT use the iPaq dongle to charge the XDA2 - you WILL fry your device. The sync cable will not work either - the connector is the same, but the wiring is different.
You can use the transformer from most of the iPaqs with the XDA2, but you MUST use the power dongle that came with your XDA2.
thanks
you spared me a heart attack
I have been after a car charger for my Exec and as O2 dont sell one i searched ebay for one. There are loads on there so bought one and it was deliverd in 2 days. But it dont work (the charger has a sticker on it saying its for motorola v3) I have emailed the seller 3 times and he wont reply. I will be reporting him to ebay. But i wanted to warn you all to avoid the seller by the ebay user name of siennacommunications.
If anyone out there has bought a car charger for thier exec then i would like to know where you bought it thanks.
I got my car charger from gpsforless.co.uk
www.dsldevelopments.co.uk
is the website of a chap on here called Bryson. He's a Brodit distributor and in fact I got my passive cradle from him. I even later bought a proper USB charger from there, both work a treat.
Cheers
Ant
Blackberry charger works
hi, I too fell into the ebay trap. So I shopped around and bought a Blackberry in car charger from vodaphone shop for £10. works a treat and doesn't look cheap.
Hope that helps
Re: Blackberry charger works
The car chargers from Orange shops @ 9.99, intended for the SPV C500 / SPV C550 / SPV M500 / SPV C600, also work fine (they're HTC devices, after all).
Re: Blackberry charger works
Ineedtoys said:
The car chargers from Orange shops @ 9.99, intended for the SPV C500 / SPV C550 / SPV M500 / SPV C600, also work fine (they're HTC devices, after all).
Click to expand...
Click to collapse
I tried the blackberry charger from O2 but it didnt seem to work correctly i.e it took around 5 to 10 mins before it started to charge, if at all. So i took it back and one of the O2 staff that gave me a refund said that they shouldnt of sold it to me.
I think i will try the one from Orange, because like you said it is a HTC device. And if there were any problems then at least i could get my money back.
BTW that twat from ebay still wont get in touch with me for a refund.
Universal Charger
Got my accessories from www.gpsmidlands.co.uk.
Also selling proper mounts for the Exec
Anton.Valleyman said:
www.dsldevelopments.co.uk
is the website of a chap on here called Bryson. He's a Brodit distributor and in fact I got my passive cradle from him. I even later bought a proper USB charger from there, both work a treat.
Click to expand...
Click to collapse
I used Bryson as well. Quite happy with the solution as well. I got the brodit clip and a window stalk from him.
Motorola V3 charger
-----------But it dont work (the charger has a sticker on it saying its for motorola v3)------------
Hi, I have an i-mate Jasjar and a Motorola V3, and I can use the V3 charger with the Jasjar, the only problem is that the V3 charger has an output of 550mA and the Jasjar charger has (should have) 1000mA.
The only way I managed to charge my Jasjar with the V3 charger is to power it off with the button, closing the lid with the Jasjar in Portrait mode and plugging the V3 charger in to the mini USB port of the Jasjar, you should see the charging led of the Jasjar (in UR case O2 EXEC) turn on Ambar it will take about 5 seconds.
Hope this helps
I swapped the curly cable from my Brodit Active cradle for a regular USB cable with a cigarette light/USB adapter, but it didn't work at first. For some reason pin 4 (which isn't normally wired up in a 4pin to 5 pin plug) had to be connected to pin 5. That might be the problem you are suffering from with the non-Exec/HTC cables.
Cheers,
Steve.
o2 car charger
just seen an o2 car charger in the o2 shop today price 14.99
Ive just ordered a hollux slim gps, a mount/cradle from dsldevelopments and a cigerette lighter to 2x usb port adapter from ebay. Only just ordered, waiting for everythign to come at the moment. The adapter is just a cigerette lighter with 2x full size usb ports on back of it, rated at 5v/7.2A, im assuming I can use the supplied usb cable that come with the exec and plug it into this to charge? (along with the gps at same time).
pyrom said:
Ive just ordered a hollux slim gps, a mount/cradle from dsldevelopments and a cigerette lighter to 2x usb port adapter from ebay. Only just ordered, waiting for everythign to come at the moment. The adapter is just a cigerette lighter with 2x full size usb ports on back of it, rated at 5v/7.2A, im assuming I can use the supplied usb cable that come with the exec and plug it into this to charge? (along with the gps at same time).
Click to expand...
Click to collapse
No, that's the point I was making - that configuration didn't work for me (or my colleague). The standard USB cable that has a USB A at one end and the USB B Mini at the other doesn't have pin 4 wired up in the Mini B, and so doesn't charge the Exec. I had to splice open my moulded plug, and put some solder on pins 4 and 5 to make it work.
Cheers,
Steve.
thx, i was vague (i hope ) by supplied cable, I mean the orginal exec-usb cable that came with the exec, not a generic one. The connectors on the cigerette lighter are full size usb A sockets, not plugs.
StevePritchard said:
...The standard USB cable that has a USB A at one end and the USB B Mini at the other doesn't have pin 4 wired up in the Mini B, and so doesn't charge the Exec. I had to splice open my moulded plug, and put some solder on pins 4 and 5 to make it work.
Click to expand...
Click to collapse
This is weird: I'm charging my Exec using a USB cable that came with my Canon camera and I keep the original Exec cable in my laptop bag for emergencies.
The Canon cable works fine and charges my Exec no probs. Wonder why. Maybe digicam cables also have the pin arrangement you describe?
I have now emailed the prick i bought the car charger from 5 times (ebay) and he is still ignoring me. Do you guys think i should post his email address on here so the UNIVERSAL community can have a go at the twat, or do you think i should cut my losses and move on. After all it is only £5.49 ive lost, but its the first time ive had this trouble from an ebay seller and its winding me up. WHY WONT HE RETURN MY EMAILS?
Leave a neg feedback and open a dispute case would be my advice.
try a guy on ebay 'solwareltd'
i have bought 3 cradles from him Arkon type with car charging systems built in and they worked a treat. Xda2s and Xda2i were perfect as windscreen mounted aswell as charging.
the Exec version i have to mount upside down as the mini USB is obxtruced by the side clamps but with 'rotate screen' option in TomTom this proved not to be a major problem at all.
Trustworthy and reliable i have found this guy to be and i recommend him to anyone whos after the car options for HTC devices.
thanks
SiliconS said:
StevePritchard said:
...The standard USB cable that has a USB A at one end and the USB B Mini at the other doesn't have pin 4 wired up in the Mini B, and so doesn't charge the Exec. I had to splice open my moulded plug, and put some solder on pins 4 and 5 to make it work.
Click to expand...
Click to collapse
This is weird: I'm charging my Exec using a USB cable that came with my Canon camera and I keep the original Exec cable in my laptop bag for emergencies.
The Canon cable works fine and charges my Exec no probs. Wonder why. Maybe digicam cables also have the pin arrangement you describe?
Click to expand...
Click to collapse
The interesting thing is that regular USB cables work if plugged into a PC, it's just when they are plugged into these cigarette lighter adapter devices. My setup in the car actually has one of those with a two port USB hub plugged into it, and that required the mod I mentioned.
Cheers,
Steve.
Ebay seller has just emailed me (after 4 days and six emails to him) and admits he sent the wrong charger. He says he will send me a charger for C500 which he says will do the EXEC. I hope hes right for his sake!!