Database Users

Remote connection to home PC or work

How can i connect my home pc or work pc through my Pocket PC through GPRS.Is it possible by any software.

Yes, this is assuming you have set your home PC to accept incoming Remote connection, and selected which users has the permission.
From your Pocket PC, you can use Terminal Service Client:
- First of all, you must know your home PC's IP Address.
- Launch Terminal Service Client, key in your home PC's IP Address, click connect.
- Once connected, you'll be prompted username and password to log in.
- Always use a different username than the one already logged on, as this will log the current desktop session off.
Well, since most of us use Dynamic IP DSL connection, the IP address changes everytime the PC reconnects. Therefore I have made a small Windows program to be run in the home PC to constantly update its current IP address to a website. So, from anywhere you can log on to this site (just bookmark the site) and check your home PC's current IP address. If you're interested, you can try my program, it's free.
http://www14.brinkster.com/MyLastIP
It's designed to fit a PPC browser.

Iam using XP prof.Where is Terminal service there,can u loacte.I want to test first with ActiveSync to connect my PC from Pocket PC.I have launched Terminal service in Pocket PC.It asks for Server.Its my Home pC IP address?
Please help again iam new to this!!

mushtash said:
Iam using XP prof.Where is Terminal service there,can u loacte.I want to test first with ActiveSync to connect my PC from Pocket PC.I have launched Terminal service in Pocket PC.It asks for Server.Its my Home pC IP address?
Please help again iam new to this!!
Click to expand...
Click to collapse
Make sure, your XP Pro is set to accept Remote connection, from your XP Pro PC:
- Start > Control Panels > System > Remote > Remote Desktop
1) Check "Allow users to connect to my computer"
2) Click "Select Users" to add users which you allow for Remote Connection. * Strongly advise you to set password for each username
Once this is done. You can check your PC's IP address:
- Start > All Programs > Accessories > Command Prompt
1) Type in ipconfig
2) You will the various IPs for your PC.
If you want to test using your Pocket PC, use your PC's LAN IP. (Ethernet adapter Local Area Connection).
However when your on WiFi or GPRS, you'll have to use your PC's WLAN IP, which you can obtain by using my program I mentioned earlier.

Thank you so much.But can itry to browse my PC dekstop while i have connected to Intenet and using Active Syn while i have docked my Pocket PC in the cradle.

mushtash said:
Thank you so much.But can itry to browse my PC dekstop while i have connected to Intenet and using Active Syn while i have docked my Pocket PC in the cradle.
Click to expand...
Click to collapse
Yes, you can. However, you'll still use your home PC's LAN IP when the PocketPC is docked in the cradle.

I have come out with the guide on how to use MyLastIP client and thet website:
http://www14.brinkster.com/MyLastIP/guide/guide.asp

Its realy nice job!!As you said to use Home PC Lan IP.I dont have netowrk on Ethernet card no cable pluged in.So i cant see Lan IP address.When I tried POcket PC Terminal its not connecting to Server,i was trying by USB Docked PPC.What to do

I gather your not connected to a LAN nor having an Ethernet card installed.
If you want to try out Terminal Services Client from your PocketPC, you may want to download this program called vxUtil from http://www.cam.com/vxutil_pers.html
Once u get this program, you can view your Pocket PC's current IP addresses. If you want to use TSC via USB cradle, take a look under "Serial on USB", the IP address for its Default Gateway should be your PC's IP address.

VPN?
Great thread for me guys. Really helped a lot. Now I can use Terminal Services to remote control my VPN Server which has the public internet IP address.
Next, however, I need to remote operate one of the workstations on my VPN. I tried logging onto the VPN through GPRS that worked. I can TS remote the server, but cannot connect to the workstation. After connecting to the VPN I tried TS with the workstation ip (local network ip of 168.192.xx.xx All I got was a could not connect server timed out message. Any ideas?
Thanks
BTW the LAst IP Address web site is a great idea for us that travel constantly. Thankfully my cable modem keeps my IP address fairly static for long periods at a time. But this will make a great backup for those Murphy Law times when I gotta get on and the modem rebooted! Thanks for a great service.
Steve

Did anybody tried J-Desktop to access via Pocket PC?

Re: VPN?
watchdogsdg said:
I can TS remote the server, but cannot connect to the workstation. After connecting to the VPN I tried TS with the workstation ip (local network ip of 168.192.xx.xx All I got was a could not connect server timed out message. Any ideas?
Click to expand...
Click to collapse
Could it be a built-in or personal firewall installed on the workstation? or maybe the workstation's port for Remote Desktop is not opened?

VPN
No, no firewall and remote is open. In deed, I have VNC running on the workstation and after logging on to the vpn i can remote the workstation using vnc viewer. but i hate the interface compared to TS and don't really want to run another server if not necessary. btw i can run the workstation from my xp laptop using remoe desktop connection after logging ono the vpn
thanks for any tips.
steve.

Pocket explorer problem over VPN (GPRS)

Hi all,..
Maybe someone of you can help me with the following problem concerning VPN over GPRS.
I'm using the WM5 build in VPN client often, and seems to be working fine for the terminal application (Remote desktop).
Now I want to access shares and folders on the VPN server with my WM5 client (same server as the remote desktop server). When I set up a VPN connection with my universal to the Windows 2003 server, I cannot access shares and folders. When I try to connect to the remote desktop it goes fine.
On my laptop I can access the shares, but only on my Universal I cannot.
I think it must be something with a default gateway. There is an option on my XP laptop, which say's "use default gateway on remote network". But this option is not avalable on my universal. Is this the problem? how come I can access the remote desktop and not any shares?
(PS: When I connect internal through WiFi It works fine, only over GPRS-VPN is doesn't work)
Best regards,..
Arjan

no one?

I have not been able to get VPN to work over GPRS. How do you configure connections?
Qtek 9000
ROM:1.30.77 WWE
Radio 1.09.00

3G remote desktop

hi.. is any one manage to connect to desktop pc from his athena from the internet?? ( no logmein)

dekyprio said:
hi.. is any one manage to connect to desktop pc from his athena from the internet?? ( no logmein)
Click to expand...
Click to collapse
yes, many athena users use terminal services/remote desktop to reach their desktops or servers. You must be able to get to port 3389 (or other port used for remote desktop) on your home or work network.

rermote desktop
can you explane me how i can do that or please email me [email protected].
thanxs very much

remote on athena
the proplem is that i run vista ultimate and i`m new to this

You can have a try on Gooer
I use Gooer Remote Desktop Service and it works fine.

remote on athena
thanxs but it does not work for me

dekyprio said:
thanxs but it does not work for me
Click to expand...
Click to collapse
Firstly log into your router and open port 3389.
It is best to test your connection with Wifi first as at least then you know you're halfway there!!
On Vista Ultimate (which is the same as mine) enable remote desktop connections to your computer. This is found in control panel/system/remote (tab) on xp - should be somewhere similar on Vista.
You also need to enable a password on your computer's login page.
You should now be able to log into your pc via wifi by entering your pc's IP address (found by entering IPCONFIG on the command prompt) on the remote desktop mobile display.you will need to enter your login name and password below this. There is no need to enter a domain name.
If you have a static IP address you should also be able to login this way over 3G. However if your connection is dynamic (such as with Virgin Media) you will need to go about it slightly differently. register with www.no-ip.com and they will provide a free static address for you. No-ip runs in the background on your Vista pc and you simply login on your pocket pc with the address they provide (rather than 192....laadeedaa) - for example (yourname).no-ip.biz.
Everything should then go hunky dory.

remote on athena
thanxs very much for the interest.i`ll try it.

Remote Desktop WM6 T-Mobile Wing help

I have been searching for clarity thru islands of info in the forums as well as the net. Any help directing me would be sweet. I am trying to use my T-Mobile Wing HTC WM6 to control a computer on my home network. I have somewhat knowledge of having the server and client. Have read and installed programs. I want to be at McDonalds *or any wifi spot and log in to home computer. When I have a VNC server running it says the network ip address of 192.168.1.101 but I assume thats because its thru my network. I have went to what is my ip address.com and tried that with the port the server allows in the vnc viewer and had no luck. I think I might be too newb for such an advanced concept. I am somewhat computer savvy to alot of technical terms. If anyone could help it would be greatly appreciated. I use messengers if faster communication is necessary. Thanks in advance to any help or thoughts.

homiedaclown said:
I have been searching for clarity thru islands of info in the forums as well as the net. Any help directing me would be sweet. I am trying to use my T-Mobile Wing HTC WM6 to control a computer on my home network. I have somewhat knowledge of having the server and client. Have read and installed programs. I want to be at McDonalds *or any wifi spot and log in to home computer. When I have a VNC server running it says the network ip address of 192.168.1.101 but I assume thats because its thru my network. I have went to what is my ip address.com and tried that with the port the server allows in the vnc viewer and had no luck. I think I might be too newb for such an advanced concept. I am somewhat computer savvy to alot of technical terms. If anyone could help it would be greatly appreciated. I use messengers if faster communication is necessary. Thanks in advance to any help or thoughts.
Click to expand...
Click to collapse
a few thoughts,
1. what version of windows are you running. (e.g Xp Home or vista )
as Vista home basic and premium will not accept a remote desktop connection without a 3rd party hack to make it work only business and ultimate support remote desktop
If on XP home be sure to set allowing of remote desktop sessions to be allowed under the system properties area.
2. do you have a password setup on the user account that you log into windows on if no remote desktop will not allow access.
3. when browsing from a 3rd party network ( e.g mcdonalds or over GPRS/HSDPA ) you browse to your external ip not the dark ip of 192.168.1.x i use dyndns.org so i can just browse to the dynamic domain ip which is my external ip of my home pc
4. since you mentioned a dark ip i can only also assume your using a router at home. this means you either use such as LogmeIn/Hamachi and browse to the home pc's Hamachi IP ( e.g 5.5.100.50 ) or you will have to set a port forward in your router to forward any requests from port 3389 to the local IP of the home pc, ( e.g 192.168.1.100 )
I use static ip's in my router at home to ensire that the port forward will always goto my home pc's internal ip address. My particular router from netgear allows to have the ip of a specific machine be assigned the same ip internally based on it's ethernet adapter MAC address. making no changes required on the pc itself other them standard DHCP.
hope this helps.

1. what version of windows are you running. (e.g Xp Home or vista )
as Vista home basic and premium will not accept a remote desktop connection without a 3rd party hack to make it work only business and ultimate support remote desktop
If on XP home be sure to set allowing of remote desktop sessions to be allowed under the system properties area.
1. I am using Windows XP Home. I have allowed Remote Access under the tab Systems Tab.
2. I only have a pw on the prog VNC server on the pc but no passwords for windows *should I? :| ... Then I try VNC Viewer the the Pocket PC *T-mobile Wing.
3. I am reading up on the dyndns.org site. I assume I need the free dns service for those with dynamic IP addresses. *i hope I have that.
4. I have Linksys Bef11s4... I believe I can set static ip's though its tricky for me. I am going to try for the pc I want to connect to. This networking stuff gets a little bit blurry for me. I understand that static means non-changing, therefore the pc to connect to in network will have same ip on restarts and things. I am familiar with the port forwarding options *do i need tcp and udp checked?... again any thoughts definately appreciated...
lastly, Do you have any particular progs you recommend for me to do this concept? I have a few installed, but not sure i need all.. I have pocketputty on pda and wm6 rdc... plus vncvier. On the PC i have VNC CLient and VNC Server *believe I only need server. Thank you for your time Cyberjak

1. Just go to http://www.logmein.com
2. Sign up. It's free.
3. Screw Remote Desktop and juggling internal vs. external IP addresses and DNS.
4. Use/enjoy...no work needed.
MJB

Logmein has like 6 choices... I am looking to remote access outside my network... also is this free? I see trials and stuff... thanks for help mjb

have the logme in installed on main and when i use pda it doesnt work...i installed cab and log in fine but when i go to remote the pc it takes my access code and then pops up with error message for menuPDA.html... i cleared history and cookies and tried to make sense of the forums... I am using the T-mobile Wing with WM6.... wierd... willing to try the other way if needed... i guess i could also try loggin thru a pc not home to the remote pc... i believe i saying this remote term correctly but i believe u understand. I am trying to use my PDA anywhere to control home pc.... thanks for help guys... i am willing to try whatever way works...

I've used Logmein on my MDA Pro, Ameo and now on my Vario 3.
You should first try to remote your PC while your sitting next to it. That way you can see any firewall pop ups that may be blocking you.

I have been trying when i am right next to it... I am using my WM6 to connect wi-fi to the internet thru my network.... the pc i wanna control is on my network...

It doesn't matter what network the PDA and PC are on. Logmein uses an internet connection.

yeah, tried a bunch of things to get logmein to work, and it always comes to the page of "403 Forbidden (0x5) menuPDA.html System error: Access is denied. (5)"
checked their forrums too...
guessing i should try going back to client/server manual entry... either way, any advice from you guys much appreciated.... It seems WM6 are known for incompatibility issues with RDC situations.... hoping not the case but...thanks again guys

got logmein working nicely, thank you for the help guys...

Gooer Remote Desktop Service
I am using Gooer Remote Desktop Service(http://www.gooer.com) and it let me access my home PC using laptop or mobile phone.

remote desktop only works, as far as I know, on XP pro & Vista
http://forum.xda-developers.com/showthread.php?t=357009

Help with CheckPoint VPN

Hi all,
I'm trying to configure the VPN "SecureClient" on my p3600.
I've installed the SecureClient and configured it.
From my phone I can connect to the company VPN. Using the Remote Desktop I can access the computers inside the network, so the VPN seems to work correctly. I've tried with UMTS and Wi-Fi network.
I've configured the Messages application to access the Exchange servers via IMAP4, because I don't have access to the OMA directory to access it via OWA.
Using the network via activesync when I'm in office, everything work correctly and I can download the emails. So no VPN.
The problem is when I try to access the Exchange servers via VPN. Seems that the Messages application doesn't route the traffic trough the VPN application like the Terminal Server.
I'm using WM6.1
Can someone help plz?
Thanks in advance.