I have my XDAII cradled, and every now and then it will emit a small 'dup' and show the 'GPRS' symbol. Every hour or so, sometimes two or thee times with a minute or so in between.
Familiar to anyone?
Peter, I also see this hapoen as well, Also when i plug in the TomTom car lead and the same happens, it says its connected over serial to activesync and the GPRS symble shows up, the car radio crackles as ir dose when there is a GPRS connection running,
John
Related
Any ideas how to get the Headset Icon onto the Today screen display.
When I switch my bluetooth headset on it 99.9% of the time connects no problem but very very rarely it fails to connect, however without opening the phone application there appears to be no way of verifying that it has connected or not, as the headset icon only appears in the phone application.
On the title bar or the bottom bar would be great.............just like it does on my old M2000
Cheers
Shaunfarris said:
Any ideas how to get the Headset Icon onto the Today screen display.
When I switch my bluetooth headset on it 99.9% of the time connects no problem but very very rarely it fails to connect, however without opening the phone application there appears to be no way of verifying that it has connected or not, as the headset icon only appears in the phone application.
On the title bar or the bottom bar would be great.............just like it does on my old M2000
Cheers
Click to expand...
Click to collapse
try this
It only shows whether BT is active - can't figure out whether the BT headset is connected
...and doesn't work on universal.
Wondering if anyone has had this problem. I haven't pinned a time down yet. I use a motorola car kit. It will disconnect and end the call for no reason. Is there a timer to auto disconnect in the bluetooth stack? Any help is appreciated.
approx 4minutes or less
I was having a problem w/mda and bluetooth and sometimes without bluetooth, in that the entire network would just drop when the call gets close to 4 minutes.... I called tmo about it and they simply gave up and said maybe its the phone...so they sent me a replacement mda, used it today during one call and couldn't believe that the call lasted longer than an hour...
Mine is only with bluetooth. I guess a little more info is needed. If I hit the voice dial button on my car kit I get the voice command tone. I have also used bluetooth to play music over the car kit with the voice command controls(just for fun, horrible quality). It will disconnect while it's playing music no call involved. I have a feeling it's the bluetooth connection timing out but I'm not sure. It's frustrating.
so its not happening during phone calls???
see there might be a bluetooth timeout that tmo doesn't know about...I have to use bluetooth and it seems like every 4min or less it blanks out everything and sometimes I even have to re pair the two devices.... I would try making calls and using the bluetooth w/o car kit...mine did some of the samethings like streaming music thru bt headseat and it would blankout with that also even when not on a call..
Car Kit Not Staying Paired???
I guess I wasn't clear. It happens in both situations. I think i have to re-pair after as well. As far as I know it doesn't stay paired. When a call comes in I usually have to wait about 2 rings before it rings through the car kit. Also when I make a call by hitting the voice dial button on the car kit the blue light blinks for about 2 seconds then I get the voice command sound. I assume that the blinking is it re-pairing. I guess I need info on how to keep it paired.
Anyone? I have found that time dosen't seem to be a issue as it has done it a 1min 43 seconds and 2 mins 38 seconds.
GreggSymington said:
Wondering if anyone has had this problem. I haven't pinned a time down yet. I use a motorola car kit. It will disconnect and end the call for no reason. Is there a timer to auto disconnect in the bluetooth stack? Any help is appreciated.
Click to expand...
Click to collapse
Try turning on the bluetooth first while your phone is off. Once the bluetooth is on, then turn on your cell phone. I tried many times in frustration why it is saying "phone is disconnected" looking for problems. Then it works now and even the phone book in my Nokia and Garmin GPS. Hope it helps you too.
Turn on bluetooth device first while the cell phone is off. Once bluetooth is on, then turn on the latter. Hope it works. Do it everytime you use bluetooth device in your car.
In my car I've the Pioneer 9880BT (with bluetooth support). I can connect with the radio without any problem, but I saw a lot of limitations. I can't transfer my contacts to the radio. It freezes in the receiving contacts screen and then the bluetooth disconnects. Another thing is that after connecting, the only thing in the display that appears is that the hermes is connected. It don't display signal strength, battery power and other things that I saw after connecting a friend's basic cellphone from Nokia or Motorola.
Is there a way to solve these problems?
Thanks
Try installing Jetwaremobile on the phone, that extends the bluetooth capabilities.
http://www.jetwaremobile.com/
Thanks, I'll try it
It worked, thanks a lot
I have only one problem now, i still can't send my contacts.
Sending contacts have now worked, but there is another problem. I can't send more than 7 contacts a time. Hermes displays that has sent all the contacts (it sends very fast), but in the radio it freezes after sending 6/7 contacts. Closing the sending window in hermes, the radio displays contacts sent. Maybe the sending is too fast?
Thanks.
I was wondering iif you were able to get the pioneer to automatically detect the phone? I have a tytn and the P980BT and everything works great except for the contacts and the fact that I have to manually establish a connection with the phone.
Now it's eveything ok, I've installed Jetware 1.2 beta version. Now I've transfered all the contacts (273) without any problem.
The connection is automatic only when the bluetooth is active. If you turn the radio off (and in your car the radio is turned off after turning the car off) then you need to connect manually after turning the radio on.
If you can turn the radio on even with the car off, then the bluetooth will stay active even turning the radio off (you will see the bt light on), and after returning to the car, the bt will connect automatically. It won't connect only if you turn off and take the face off. Then you need to connect manually again.
interresting
So you work around is to keep the deck powered at all times and manually shutoff when you leave the car. Can you remove the faceplate and still have it work?
SparkS666 said:
Now it's eveything ok, I've installed Jetware 1.2 beta version. Now I've transfered all the contacts (273) without any problem.
The connection is automatic only when the bluetooth is active. If you turn the radio off (and in your car the radio is turned off after turning the car off) then you need to connect manually after turning the radio on.
If you can turn the radio on even with the car off, then the bluetooth will stay active even turning the radio off (you will see the bt light on), and after returning to the car, the bt will connect automatically. It won't connect only if you turn off and take the face off. Then you need to connect manually again.
Click to expand...
Click to collapse
So lately, after a hard reset and reinstalling all my apps/registry tweaks/programs, I have noticed that sometimes after getting out of my car, 05 Acura TL, the phone fails to disconnect from my car. I have been out of the car as long as 4 hours and any calls still show the headset icon in the phone application....
I need help please. It's driving me nuts.
I think that it just means that the BT radio stays on, not that it's still connected to your car. The BT radio does not automatically power off if not connected to a device. For instance, if I leave my phone where it has signal and forget to grab it on my way out to my truck for parts, the radio stays on but the link to the headset drops. I can answer the phone normally or press the BT headset to reestablish the link.
HTH
see, that is the problem. The radio is still on, and that is fine. I leave the radio on to recognize my car as soon as I start it and begin to drive. Now, however, it will not drop the actual signal from the car....it still wants to use BT so I can not hear anyone and have to hit menu while in the call and then click use handset. Very inconvenient and a new problem...never happend before.
Hi
I have written a mortscript which automatically switches the audio on my O2 Orbit (WM6) to my bluetooth car kit when it detects it, it then plays a sound to confirm that the sound has switched over - it also start TT if power is detected. When it looses the bluetooth connection sound is returned to the handset and a "disconnected" wav is played. Now this works fine as long as the device is awake but not when in standby. So I would like to find a way of waking the device up when it first gets a bluetooth connection and then again when it looses it. I have looked at adding something to the notification queue using memmaid but I can't see any bluetooth actions there.
Can anyone help me??
anyone?????????????