I have an 8125 with the 2.17 ROM. When trying to stream audio using WiFi and my 820 bluetooth headphones, the blutooth connect breaks after about 5 seconds and cannot be re-established until a reboot. If I stream using GPRS the bluetooth works fine. Can WiFi and Bluetooth normally be used together or is there something wrong on my unit?
They are supposed to be able to work together concurrently but sometimes there can be conflict with the signals.
One thing you can try is to set your wireless router to use a different wifi channel to the one you are on now and see if it makes things any better.
It won't work
I have tried everything. Re-installed everything. Turned things off, turned things on. Nothing corrects the problem. Motorola says to disable the phone connection to relsolve the problem. That does not work either. The Bluetooth A2DP is not working right. Maybe it is the ROM I am using. It is simply 2.17. Is there a bug in that one and should I reflash with a newer one?
So lately, after a hard reset and reinstalling all my apps/registry tweaks/programs, I have noticed that sometimes after getting out of my car, 05 Acura TL, the phone fails to disconnect from my car. I have been out of the car as long as 4 hours and any calls still show the headset icon in the phone application....
I need help please. It's driving me nuts.
I think that it just means that the BT radio stays on, not that it's still connected to your car. The BT radio does not automatically power off if not connected to a device. For instance, if I leave my phone where it has signal and forget to grab it on my way out to my truck for parts, the radio stays on but the link to the headset drops. I can answer the phone normally or press the BT headset to reestablish the link.
HTH
see, that is the problem. The radio is still on, and that is fine. I leave the radio on to recognize my car as soon as I start it and begin to drive. Now, however, it will not drop the actual signal from the car....it still wants to use BT so I can not hear anyone and have to hit menu while in the call and then click use handset. Very inconvenient and a new problem...never happend before.
Using the Touch HD with a builtin bluetooth car kit. Everything works fine, the phone's contact list displays on the screen of the car. The pairing went fine. Call history works. Happy me. But occasionally i notice after making a call via the car (after hangup) the connection disappears and i check the phone. Bluetooth is switched off!!! How can this be? Are there any settings i have missed?
Any other users experience this?
same here with my bt handsfree
what if you connect it to powersupply ?
with power : working
without power : after some minutes off
sometimes I can not access the contactlist, stop the car, remove the key, start again and it works
There is something wrong with BT + car
I've had my HD a couple of days and use it with the built in BT in my Audi. The car displayed "telephone is not connected" and when I checked the phone, no BT icon. I've had problems in the past with other makes not working very well like this and was thinking it was going to be the same here... As I was getting annoyed a call came in, rang for about half a ring on the phone then it reconnected to the car and continued ringing there, answered the call just fine.
Since then it's done the same thing twice, I'd prefer it didn't but it hasn't actually caused a problem yet.
BT shuts off by itself.
I seem to be having the same problem in my Audi Q7. It does not make a difference weather to be connected to a power supply or not.
Im having the same issue here, in my A4 Cab with integrated UHV 0420
Strange thing is, it doesnt disconnect from my works Parrott kit.
It does turn off the Bluetooth on the phone, strange. It didnt happen for the first week though.
Any ideas?
Bloke
same here. having problems with my Land Rover LR2. first week, there were no problems. now, the phone doesn't automatically connect when i start the car, i have t manually connect it by pressing the phone button on my dashboard. it then connects with no problem. however, when i try to place a call, it automatically disconnects the bluetooth.
not sure if this is a problem with the htc or my car; i have to try another phone with the car first.
Same happens in my Lamboughini and also my Mercedes- Benz E Class.
Looks like I'll just have to stick with my roller from now on!!!!
I see I'm not the only one with this problem. Soooo...... anyone got a fix?
Please, at least have you checked for a few seconds after the disconnect to see what happened ??
Well, I have a BMW S1 with in-car bluetooth. I previously owned an S200, SE K800i and a Touch Pro and never got any problems with those phones.
With HD Touch I also have the same problems like you people, but 2 or 3 seconds later the BMW regain the connection with my HD.
So, for me this is no big deal. If this only happens to me, then I'm the first to apologize my introduction on this post, if not... lol
Im sure its not related, but I installed the hotfix for the TF3d earlier and I didnt have any disconnects on the way home....... ????? Go HTC.....
Bloke
yesterday i installed the hotfix from htc, but today i lost bluetooth connection again in the car. The bluetooth in the car keeps functioning, but the bluetooth on the HD has deactivated itself! With my previous sony ericsson phone (also bluetoot 2.0) i didn't have this problem. So i think it's related to the bluetoothsoftware on the HD.
bloke said:
Im sure its not related, but I installed the hotfix for the TF3d earlier and I didnt have any disconnects on the way home....... ????? Go HTC.....
Bloke
Click to expand...
Click to collapse
I spoke too soon, it disconnected this morning and didnt reconnect....
Bloke
Have a look at this thread - also bluetooth problems with pairing issues - looks like BT maybe bugged
http://forum.xda-developers.com/showthread.php?t=442987&highlight=bluetooth+problems
Hello,
I have the same problem. I can not really use bluetooth in my car, because the Touch HD ends the connection after a few minutes (most times after less than five minutes).
Without a connection to the car, bluetooth will not be ended by the Touch HD, so it seems to be a problem of a connection to a bluetooth headset or a problem of a connection only to a car bluetooth "headset".
Regards
Thomas
Does this only apply to original built-in bluetooth kits and not after-market kits?
My BT-radio does not have problems with the Touch HD, but it is an after-market radio.
Same problem here. My connections drops also. I drive an Opel Zafira with builtin bluetooth carkit. Bluetooth is turned off after a while.
I've noticed when i start the car a connection is made and a few seconds later bluetooth is turned off and immediatly turned on again. After it's turned on, the connection is stable for a while. A few moments later it turns off again. Then i have turn the bluetooth connection manually.
Today i had a phone confercation for a half hour. The connection stayed stable. When i hang up the phone, the connection dropped .
Can the synchronisation of the phonebook be the problem? I had this problem with my p3600. After installing Jetware, the problem was solved. I've installed Jetware on my HD, but with no luck .
Is there a way to log the bluetooth communication. May be it tell us more
Indeed the HD bluetooth seems to be poor, I also experienced bluetooth switching off by it self when trying to pair with my Motorola S9 headphones, I have the hotfix installed, before I didn't notice this bluetooth behavior.
Also when exiting Opera the phone hangs, not always but sometimes
Anyone solved the problem yet
I send a email to HTC support. Hopefully they can help. If they answer......word goes arround that htc support sucks
still don't have a solution.........
I just got a TMOUS HD2 and had the same problems a lot of other people are having connecting it to my car. It connects to the car correctly, downloads the address book, but no sound comes through the cars speakers and the call doesn't register on the cars phone display. I searched XDA and there seems to be a bunch of registry change posts that don't seem to work all the time and disable some features. By doing the following I get it to work consistently with all the features enabled.
1) Turn off the data connection and Bluetooth in Comm Mgr
2) Turn on Bluetooth and connect (or pair) the phone with the car
3) Make a call
4) While in the call, turn the data connection back on
It works for my Land Rover RRS and stays working until I reset the phone. After I reset, I just go through the above procedure again.
I don't know if it works for every car make but it should work for most Volvos, Jaguars, and Land Rovers since most of them use common bluetooth systems.
Hope this helps somebody.
I am having the same issue. I have to manually connect the music stream. The phone stream always connects. Hoping for a fix from T-Mobile.
kevev said:
I am having the same issue. I have to manually connect the music stream. The phone stream always connects. Hoping for a fix from T-Mobile.
Click to expand...
Click to collapse
My car doesn't support A2DP - the phone's separate from the audio head. All the car's phone features work though - voice recognition, conference calling, transfer to and from the handset, and address book and digit dial. I wouldn't hold my breath for a fix though. It's the WIDCOMM Bluetooth stack that HTC started using with the TP2 so there are over a year's worth of complaints logged with HTC and no sign of a fix.
well, not much to be said for the Microsoft bluetooth stack either. I have a 2010 LR4 and can't get my HTC Raphael/Touch Pro/Fuze to keep a connection. Hard to know what the problem is, starting a WiFi or GPS session often resets the connection, in addition to the random drops, sometimes mid-call.
When I tried an iPhone though, it worked fine, naturally.
I have a N6P, rooted 6.0.1 with Xposed. I use MacroDroid to automate some processes. E.g. I have a macro that enables bluetooth whenever I leave the house and my phone disconnects from the home wifi network. In my car I use a Parrot CK3100 bluetooth voice kit. I want my phone to automatically connect to the kit whenever bluetooth on my phone is enabled and I start my engine (and the Parrot becomes powered). Whenever I switch on bluetooth manually and it is on for some time and I get into my car and start the engine, my phone connects to the Parrot without any problems.
I also have a macro which actions are that a sound is played and it vibrates whenever the phone connects to my Parrot. But whenever I leave my house, I can see that my bluetooth is enabled but when I get into my car and start the engine, I can hear the sound and feel the vibration of the MacroDroid macro, but the screen of the Parrot still shows the Parrot logo and not the name of my phone. So MacroDroid confirms that a connection has taken place (otherwise there wouldn't be any sound and vibration), but in fact the phone and Parrot are not connected. Going then into BT settings and trying to connect manually works in 50% of the cases.
I have also tried AutomateIT to get this working, but with the same outcome. And the app Bluetooth Auto Connect (to force the connection) didn't bring any luck either.
Because when enabling BT manually before I leave the house the connection succeeds and when using the macro it does not (neither in MacroDroid not in AutomateIT), I suspect that it may have something to do with the (short) time between the enabling of BT and the powering on of the Parrot, but I'm not sure.
Anyone any ideas?