Related
The following should give users an idea what they are in for if they decide to take the plunge...
It happened again. Out of the blue, my XDAII froze, then turned itself off. I closed my eyes and there it was, this terrible electric 'bling bling' sound. I didn't have to open my eyes to confirm that another hardreset had just happened on my XDAII. No particular reason. As if my XDA wanted to tease me, it had just decided to clear everything in its memory, all installed programs. And now? installing everything again? when there was no insurance that it wouldn't hardreset itself again?
No, I said to myself, not this time. I opened the file explorer on my PC and did what I thought I would never do: I started the upgrade to install Magneto or better known as Windows Mobile 2005 on my XDAII.
When I downloaded the Magneto files, I thought to myself that I would just keep them for storing. You never know. One hardreset later and suddenly Magneto sounded like a godsent to me.
The upgrade went smooth, very smooth in fact. Before the upgrade I deleted the extended rom files and storage files. Maybe that helped.
All OK? Not quite. I could not connect to my PC and activesync via USB. Everything worked well via Bluetooth, but USB? No chance. I found out that it had something to do with XP and not having the servicepack 2 installed. Well, no choice. Goodbye USB sync. I could live with that since I still had bluetooth.
Once I had Magneto running, I started installing my standard programs. Most of them worked. The only one that did not was WorldMatePro. OK, I tried to live without it.
I installed most of the programs into Storage. They all worked. I even tried to install some of them into Buzz' RAM disk. A few worked as well, some couldn't be installed there. Well, I anyway planned to use the RAm disk for storage.
I was actually surprised that XCPU_Scalar worked. Well, even Magneto is now overclocked to 530 MHZ on my XDAII.
I also installed PocketZenPhone and Pocketbreeze. Somewhere I had read that these programs would not run on Magneto. But no issues on my machine! They both worked. The only issue I have with Pocketbreeze is that the category icons & colors are gone. Pocketweather also worked fine. Again, I was surprised that Magneto was so compatible.
Unfortunately, PocketContacts was a dead-end. "No contacts found" was the only message I ever got from it. Goodbye PocketContacts.
I had a few more programs in my folder on the PC, but the memory on my XDAII with Magneto is limited. Very limited. Very very limited in fact. But for me not such a big issue as I do not have too much necessary software on my XDA. I could live with this limitation for time being.
Anyway, I wanted to try Magneto for a week and see if I stayed with my new friend.
After I made the first few phone calls with Magneto I was impressed with the dialer. Nice interface. Also, it seems to me that the phone connects much quicker to the provider than before.
But why didn't they include something like the intellidialer? Well, the new contacts application is quite nice, so I will use the contacts instead. Not too bad.
Then, on day three, the disaster. Suddenly, the screen stopped reacting. Well, it actually didn't stop, it just didn't react to the places where I touched it with the pen.
I was already thinking about "hardreset", when it came to me that the screen orientation was wrong.
I had installed Vitobuttonmapper and mapped <rotate screen> to the record button as press and <start bluetooth> as press & hold. I figured out that I must have pressed the record button not long enough, therefore the <rotate screen> command was executed. But somehow, the screen orientation remained in Portrait but the touch screen was now in landscape.
I managed to fix this problem by changing back to Portrait and making a softreset. Then I tried to repeat this error. Yepp, the <rotate screen> was the culprit.
Consequently, my Magneto has no screen rotation anymore. But I can also live with this.
The rest of the week went fine. Magneto is stable and smooth.
Now the final question: Will I stay with Magneto? Yes, I will. I am often travelling and therefore I need a device that I can rely on. If I'm on the road and my XDA hardresets, I'm dead. Therefore Magneto is the solution for me. No hardresets, and even if the battery goes dead, I'm safe.
But one thing is clear to me. When the first Magneto devices come out, and hopefully there will be the Magician with Magneto, I will immediately retire my XDAII and buy one of these devices. Magneto is the future. No doubt about it.
What do I like the most about it besides the "goodbye hardresets"? for sure the softbuttons. Just great!
I hope this was useful.
Cheers
Pat
Hmmm.... Interesting.... Very, very interesting!!!!
I think I'll try Magneto real soon... However, I have a question: Is it possible to return to 2.06.00WWE just in case?
Thanks for such detailed story!
Best regards,
Rayan
return to 2.06.00WWE
pschoch said:
I could not connect to my PC and activesync via USB
Click to expand...
Click to collapse
I have the same problem. But let me just say that I have 2 harddrives on my PC. Both with Win XP + SP2. I tried to synch Magneto on the harddrive I frequently use but it DOESN'T work... So I tried booting my 2nd harddrive. This 2nd harddrive has a fresh installation of Win XP + SP2 and other essential utilities like Office suite, WinZIP, etc.
And guess what...activesync 4.0 using USB WORKED using my 2nd harddrive. Very ODD...
Rayan said:
I have a question: Is it possible to return to 2.06.00WWE just in case?
Click to expand...
Click to collapse
YES it is possible to return to 2.06.00WWE...I have done exactly that.
I have been running Magneto for about 1.5 weeks. And I must say it's GREAT! But as you know it's just a leaked version so it has a LOT of bugs. So I've decided to go back to 2.06.00WWE until Magneto is more stable/reliable.
How to configure Connect via bluetooth ?
I done the WM2005 installation and i manage to connect via USB with everthing sync. But i like to know how you can setup the activesyc via bluetooth ? I own a Level One bluetooth dongle and i did try to connect via bluetooth in WM2003 before i upgrade to SE. Now in Wm 2005, i still have no luck to get it work. Help !!!
I m using Windows 2003 and had configure Comm 5 in ActiveSync 4.0, added bluetooth serial port 5 in widcomm drivers. And also i pair my XDA2 with my machine several time to make sure it is paired. I try everthing include try to do file transfer from my deskop also no luck.
Btw, i can't discover any ActiveSync service in "My Bluetooth Places", i can only see "Dial up networking, Push Object". I do c actvesync in WM 2003.
Everytime i choose "Connect Via Bluetooth", will get this message "Cannot find an existing Bluetooth partnership with a PC that supports ActiveSync. Would you like to set up a patnership now ?" Yes/No button. But i had done the pairing before that ?
please help.
Change "Secure Connection" to "Not Required"?
Works for me, without Magneto (yet)
pschoch said:
It happened again. Out of the blue, my XDAII froze, then turned itself off. .........another hardreset had just happened on my XDAII. No particular reason.
I was actually surprised that XCPU_Scalar worked. Well, even Magneto is now overclocked to 530 MHZ on my XDAII
Click to expand...
Click to collapse
well... think I know why you're xda froze... I overclocked the cpu on xda and when the speeds are 2 high the device will hardreset!!
p.s. magneto rulez! tnx buzz!
I've got the same problems with activesync via Bluetooth. My device doesn't seem to recognise the Activesync service on my Sitecom Bluetooth device.
With 2003SE I didn't have any problems. Madkat's proposal didn't work.
Update to WM5
You are lucky, I was tryed whole last night but fail, it always give me the message "Error 101 - Connection error". USB connection is very good, I could do everything with cable :shock:
Re: Update to WM5
I have got the same problem connecting bluetooth adaptor D-Link DBT-120 with o2xda2 running on 2k3 not se. Anybody help?
Hello amigos!
On this page you can find a possible solution for the Bluetooth/ActiveSync problem.
http://forum.xda-developers.com/viewtopic.php?t=20727&postdays=0&postorder=asc&start=100
Best regards,
Rayan
Re: How to configure Connect via bluetooth ?
clementluy said:
I done the WM2005 installation and i manage to connect via USB with everthing sync. But i like to know how you can setup the activesyc via bluetooth ? I own a Level One bluetooth dongle and i did try to connect via bluetooth in WM2003 before i upgrade to SE. Now in Wm 2005, i still have no luck to get it work. Help !!!
I m using Windows 2003 and had configure Comm 5 in ActiveSync 4.0, added bluetooth serial port 5 in widcomm drivers. And also i pair my XDA2 with my machine several time to make sure it is paired. I try everthing include try to do file transfer from my deskop also no luck.
Btw, i can't discover any ActiveSync service in "My Bluetooth Places", i can only see "Dial up networking, Push Object". I do c actvesync in WM 2003.
Everytime i choose "Connect Via Bluetooth", will get this message "Cannot find an existing Bluetooth partnership with a PC that supports ActiveSync. Would you like to set up a patnership now ?" Yes/No button. But i had done the pairing before that ?
please help.
Click to expand...
Click to collapse
Try this link http://www.geekzone.co.nz/content.asp?contentid=1421
Re: How to configure Connect via bluetooth ?
Thanks everyone for the solution. I had to revert back to 2003SE by Xdajojo version, because 2005 did not connect with usb or bluetooth adapter. activesync 4.0 does not seem to work properly on my device (O2 XDA2). I changed back to activesync 3.8 and worked properly with 2003SE. I can even go on internet using activesync. Also I have TOMTOM 3.0 Bluetooth version wich did not install on 2005. I will wait until proper stabilised version of 2005 is released by xda-developers team.
Is anyone else finding that their bluetooth is really slow at sending and receiving items. Also that there is no way to send items direct to a contact that is in your partnership list, you have to search for them every time you want to send something. If someone has found ways around these problems, please let me know.
an adaption of the Blue angel's bluetooth interface would be lovely. It had loads of options, and let you explore remote devices. This is just like the XDA2.
Would it be possible to port the BA software onto the wizard? I think it uses a different BT stack.
they were able to port the wizards rom to run on a blue angel. I guess they should be able to use the blue angels bluetooth on a wizard.
Please help - is so annoying
Ok, after a little research i found this thread http://forum.xda-developers.com/viewtopic.php?t=33532 .It has an app which i installed and has helped a little. I can now send images direct to people i have paired with without having to search local bluetooth first. The thing is it only sends images to paired people. I want it to also send sound and video files. When in file explorer, holding down on an image brings up the extra option of "Send image via bluetooth" which then allows to send by the already paired devices. When doing the same on videos and sound, it doesnt give this option. Maybe this can be done in the registry, but i dont know alot about that so maybe someone could help?
i tried this on my kjam and i had a problem with it, so i uninstalled it.
the problem i had is that the bt keep switching off by itself with no reason, even if i was already syncing over bt, the connection is lost suddenly and i found out that the bt is off (even though the bt icon on the system tray shows its still on).
i don't know about you guys, but i had this prob twice, i reinstalled it again and gave me the same prob.
i can live without it.
Ok, maybe that stack is not all that great. After soft reset lost all sound, and BT does not work properly. Uninstalled and back to normal. So again is there any way to send to people in your paired list without having to search for them every time. Is becoming a pain coz some new phones turn off discoverable after 60 seconds. So they have to keep turning theirs back on. Its a simple option, dont know why they didnt put this in. Any help?
I haven't seen more than 50-60KBps. Has anyone else seen higher transfer rates?
Wizard's BT is useless. Buggy, slow and poor.
And it is not v2.0, it is v1.2
It does not have EDR.
It doesn't even have PAN ffs... :x
tsiros said:
I haven't seen more than 50-60KBps. Has anyone else seen higher transfer rates?
Wizard's BT is useless. Buggy, slow and poor.
And it is not v2.0, it is v1.2
It does not have EDR.
It doesn't even have PAN ffs... :x
Click to expand...
Click to collapse
Info about BT in wizard. Directly from BT CIG's site. The problem is not with the Wizard, it is in usin MS BT stack.
thanks for that emmeborn, if the problem is the stack, do you know of a stack upgrade which works good? I tried the stack form the blue angel, but stuffed up my phone, so uninstalled it.
actually, i just looked at those pdf files, and at the bottom where it has the revisions, seems they have launched a version around 1 month ago. Would this be a software or hardware update. If its software then i reckon this could solve alot of problems im having.
Enervate said:
actually, i just looked at those pdf files, and at the bottom where it has the revisions, seems they have launched a version around 1 month ago. Would this be a software or hardware update. If its software then i reckon this could solve alot of problems im having.
Click to expand...
Click to collapse
It is the long awaited rom update. A test version of that rom has already leaked. You can find more info in the Wizard upgrade forum topic about that version.
I am awaiting the localized swedish version of that rom and the latest about that version is that it should be released mid March.
Hi guys,
This has been something I've been trying for a long time (since I first got my Wizard nad now my hermes), but to no avail.
I've got TomTom 5 and the 3dtracking software from http://www.3dtracking.net/home.aspx, both of which work very well on their own.
However, trying to get them to work together is a nightmare.
I've tried franson GPS gate in the past, but found it very tempremental and I'm loathed to fork out 15 quid to do something that my device should handle anyway.
I've enabled the GPS control panel, no problem whatsoever, chosen the appropriate hardware and software ports in the GPS control panel, set up an outgoing port in the bluetooth settings, told the PPC to manage my connections automatically, told TomTom to use another bluetooth GPS on the appropriate software port and told 3dtracking what software port to use and bob's yer uncle... nothing happens! (Good grief, that's a hellishly constructed sentence! Sorry!)
Anyway, has anyone successfully got this to work?
I've tried a number of combinations of ports etc., and also follwed about the only guide I could find on the net, but nothing seems to work.
Your help would be appreciated!
Adrian
Any thoughts guys?
What version of GpsGate have you tried ?
The product has developed very nicely; I am using GpsGate with 3 applications using the GPS signal at the same time without problems at all.
Martin
Hi Martin,
Thanks for that. I've not used version 3 to be honest, it's something I might give a try in the end.
I'm by no means averse to paying for a piece of software, but it wrankles me somwhat when the device is supposed to do something on its own.
Is there an inherant problem with the control panel function, or something that can be fixed do we think?
Thanks,
Adrian
Hi!
I got the same problem over here.
Trying to use Navigon MobileNavigator 5 and POIObserver via the built in GPS-panel. BT-GPS is a NaviLock BT-338
Thanks
Brevi
Hi Members,
I have just joined the site and this is my first post to try and find a solution to the most annoying frustrating problem im having. I am trying to connect a o2 XDA Mini to my laptop via bluetooth over a belkin dongle. My system only shows com port 4 then 9 12 etc. I have tried using 4 many times. Both the phone and the pc partner ok, but then when i try to sync from the handset the PDA try's to partnet again and will not connect. I have tried other ports, no good! same result. I then searched google extensivly and tried installing other stacks Widcomm, blue soleil etc as i aslo have cards and dongles for those, still no joy. Is the phone broken? Well my wife has the same make and model. Her one wouldnt connect either!! whats the problem with this phone/PDA. Do you have to be a rocket scientist to use BT or what. I visited other sites and forums and posed the question there. Apart from one reply it appears no one seems to know either way. Any help or guides other than the outdates geekzone(2004) would be most appreciated as i think those guides were not created for WM5 systems lol
Thank you and fingers crossed lol
EFM
I've always had problems syncing over bluetooth.
I dont have a WM2005 device, but my XDA mini exhibits the same problems.
I did get my xda to sync through bluetooth on my windows computer, but that was using bluesoeil. Strange thing was, after i switched stacks to the normal windows one, when i successfully sync'ed through bluesoeil, it WORKED!!
A hard reset has happened since then and im plagued with problems.
If you use a mac and a PC like me, i found it very easy to sync my xda mini through bluetooth with a mac. (provided you have buy the software).
If you search even harder through google, theres a page i came across which shows you, through windows cmd line, delete ports and free some up. Havent tried it tho.
Anyways goodluck, try hard resetting and starting fresh if you wanna sync wirelessly that bad.
Try this
Try this , it may work for you. Also I found that XP SP2 is needed if you wnt to sync via BT
http://forum.xda-developers.com/showthread.php?t=246847
Good luck
Ciao
works perfectly for me using different versions of vidcomm on the belkin and logitech dongles i have on various computers
on the pda i just choose the IMSync or whatever it's called as profile
and start activesync on the pda click on sync over bluetooth and it does
Heres something i found...
http://help.lockergnome.com/general/Activesync-Port-Availability-Bluetooth-ftopict26563.html
http://support.microsoft.com/default.aspx?scid=kb;en-us;315539
thats how to delete ghost ports from your system.
I got everything NEARLY set up, i cant set a outgoing port!.
I even hard reseted, still no luck, i think i just need to set a outgoing port to get this to work.
whitemoo.
ok...after restoring my backup from the hard reset, i rebooted the phone.
Then i got side tracked and went on the XDA-developers wiki.
Seeing that 'set up your own bluetooth personal network' article, i decided to set it up.
Figuring out that the original bluetooth stack is worthless, i switched to bluesoeil and rebooted.
Bluesoeil did not work for some reason, and couldnt find my bluetooth hardware, so rebooted the phone with the normal stack.
I went into the normal stack that came with my phone, and mysteriously, i could set outgoing ports!
I set the port my outgoing port to comm0 and tried to sync.
AND IT WORKED!!...its finally syncing!
Oh btw, i found this file in my ext rom: called 'default_BT_com_port0.cab' i installed it and it allowed me to set comm0 in the normal staCK. Previously before i installed that cab, i couldnt see ANY avalible com ports to set.
YAY!...whitemoo.
Hi
Thanks for the advise there it was appreciated. I have tried the different bluetooth devices two doggles and a card all with widcomm and microsoft drivers all have not worked blue soleil wouldnt find a serial port on my phone only dUN and Push obex. I have spent ages on this now i figured it just a worhless wm5 smartphone with a keboard.. oh MS if your listening re XDA Mini factor it in to the guidebook how to sync to an everyday computer to bluetooth. You provide the function but it dont work.. crapper ive had it with this overated smartphone with a slide out keyboard. worse thing is how much i paid for it. what a rip off!! I could get an old C500 WM2003 to BT sync on all three of these BT dongle/card.
Oh well thx.. Guys glad you got a result with yours bravo' lol
Many thanks for the input.
EFM
Hi again,
I have tried to contact o2 re this matter they tell me it cant be done via activesync and bluetooth. Has any one else managed to sync an XDA min via activesync to there computer. I am running xp pro SP2, Activesync Ver. 4.1 of the cover disc with the phone. I downloaded 4.2 and 4.5Beta to make sure none work. Google searches reveal nothin g on the subject. The model i appear to have is the WIZA200 version with WM5 rom version 5.1.195 (build 14847.2.0.0).
Any clues folks
thanks.
EFM
Can anyone help me please with this problem?
Thanks.
I opened this thread to sign here all the BT problems found on our BA using WM6.5
I'm using Radio 1.13 on WM6.5 21198. I can pair a Qstarz 51channel GPS antenna correctly, but after the pairing the device remains disconnected. After checking the Serial Port box in the device settings i'm able to tap on 'Connect', but then the BA always report 'Unable to connect, connection failed or password wrong'.
I tried with Broadcomm stack b3900 but i get an error on startup about 'Storage' file being deleted or something else.
I tried with Helmi BT stack b3400 and it works: i can pair and connect. However connection seems to be unstable and after a few i get the device disconnected automatically, i don't have even the time to set up correctly Navigon Navigator. After a SR sometimes i get 'Unable to turn on bt cous of lack of memory, try to sr... blablabla'. Sometimes i have to HR to leave this error message.
better experiences?
I never use the CONNECT in the BT Settings to connect to my Holux GPSlim236. I just Add New Device... then set the COM Port to port #6, then go to Start/Settings/Connections/External GPS ... Under the Programs tab (Select NONE), under Hardware tab (Select the COM Port you set on BT, in my case COM Port 6), on the Access tab (Mark Manage GPS Automaticaly. Then I go open whatever GPS Software I'm going to use, and it usually connects to the GPS Reciever automatically. [edit] If it doesn't connect, then I go to the settings of the GPS Software and I tell it what my GPS Reciever COM Port is. I usually have to do that with Live Search and iGO8(all though iGO8 has a search for GPS that always finds it too)[end edit] However, from the best of my memory, I have never seen my GPS listed as CONNECTED. So again, I don't think you need to try to Connect on the BT Settings page. Give it a try, hope this helps.
Another option is to contact Qstarz support and ask them how to properly set up your GPS on WM6+. They should be able to walk you through.
[Edit:] I will test tonight if I get that error message by trying to use the CONNECT funtion on BT Settings. Also, I'll see if when the BT GPS Receiver is connected, if it shows on BT Settings as CONNECTED. I'll post back my findings as an EDIT to this post.[End Edit]
<Edit> I've done some further testing as promised. Here is my finding:
*When the BTGPS Reveiver is connected to the phone, there is no indication on the BT Settings as that it is "Connected", however it is, as Live Search, Pharos, iGO8 and Google find it without any troubles.
*I tried to highlight the GPS Receiver and tap on CONNECT, but the softkey is greyed out(not available).
*I tried tap n hold over the Receiver with the same results, connect is not available.
I have not noticed any problems with Blue tooth on build 21198.
Same problem to me with Jentro BT8.
Now trying HELMI_BA_BTstack_Build 3400.CAB.
Hope this one works.
frafor said:
but after the pairing the device remains disconnected. After checking the Serial Port box in the device settings i'm able to tap on 'Connect', but then the BA always report 'Unable to connect, connection failed or password
Click to expand...
Click to collapse
I am also having the same problem. Is there any fix for it. Can some one get xplode to help us with same problem
kabbab said:
I am also having the same problem. Is there any fix for it. Can some one get xplode to help us with same problem
Click to expand...
Click to collapse
Read markanthonypr's and frafor's posts above. Those are the only two solutions found so far. I am currently trying out markanthony's solution and so far it seems to work. I'll have to do some further testing.
I've been able to connect my GPS using helmi's b3400 stack, the connection is far stable but i have to set up the GPS ports fast, then open Navigon Navigator because otherwise the GPS enters standby mode and it looses the connection. However in these days i'll try the new build
markanthonypr: i too use 'add new device', but after the wizard procedure the GPS is listed under 'Disconnected devices' so then i have to check 'Serial port' service and tap 'connect'. Here i get the error message.
frafor said:
I've been able to connect my GPS using helmi's b3400 stack, the connection is far stable but i have to set up the GPS ports fast, then open Navigon Navigator because otherwise the GPS enters standby mode and it looses the connection. However in these days i'll try the new build
markanthonypr: i too use 'add new device', but after the wizard procedure the GPS is listed under 'Disconnected devices' so then i have to check 'Serial port' service and tap 'connect'. Here i get the error message.
Click to expand...
Click to collapse
Have you tried w/o checking the Serial Port? I don't check the serial port. I just tried what you've stated, and got the same error you are talking about. But like I said, It connects to BT GPS Receiver w/o the Serial.
markanthonypr said:
Have you tried w/o checking the Serial Port? I don't check the serial port. I just tried what you've stated, and got the same error you are talking about. But like I said, It connects to BT GPS Receiver w/o the Serial.
Click to expand...
Click to collapse
Well mark, you were right on the money with your suggestion. It seems that 6.5 controls external gps devices from within that option in the settings rather than the BT console. I am using Destinator 7 with my Pharos BT GPS and aside from taking a few minutes to connect, it works like a charm once it does connect...
egzthunder1 said:
Well mark, you were right on the money with your suggestion. It seems that 6.5 controls external gps devices from within that option in the settings rather than the BT console. I am using Destinator 7 with my Pharos BT GPS and aside from taking a few minutes to connect, it works like a charm once it does connect...
Click to expand...
Click to collapse
LOL well I'm glad yours is working. I tried using Frafor's method, got his same error, went back to the method I always use, and now it won't connect LOL blah... I'm sure it will after a soft reset.
Speaking of soft reset. I've been searching all over for the darn XP ShutDown and can't find it. I know its here, but, why can't search find it? I wouldn't dare to ask you to point me in the right route, would you think I had the guts to as that? "Giggling"
Edit: Oh and I did use the Search !
i attached it for you, but be aware of the fact, that this is the basic version with a very xp like look for themes and how to install them go to: http://ppcsoft.narod.ru/english/
markanthonypr said:
LOL well I'm glad yours is working. I tried using Frafor's method, got his same error, went back to the method I always use, and now it won't connect LOL blah... I'm sure it will after a soft reset.
Speaking of soft reset. I've been searching all over for the darn XP ShutDown and can't find it. I know its here, but, why can't search find it? I wouldn't dare to ask you to point me in the right route, would you think I had the guts to as that? "Giggling"
Edit: Oh and I did use the Search !
Click to expand...
Click to collapse
I wouldn't dare to tell you to search... you know better than that
As far as the BT, it seems that it isn't a matter of drivers after all, but rather how 6.5 is handling them. Stick with the original drivers, I think that there are a few surprises in stock with the other BT stacks (Helmi's and broadcomm's)
Also, if I could recommend you Destinator 7, it seems to do just fine. I haven't tried Tomtom 6 or iGo 6 (all of which I used to use), but this one is very lightweight and the maps are not ridiculously big either.
Good to see you around buddy!!
Chef_Tony said:
i attached it for you, but be aware of the fact, that this is the basic version with a very xp like look for themes and how to install them go to: http://ppcsoft.narod.ru/english/
Click to expand...
Click to collapse
Thank you very much Tony!
egzthunder1 said:
I wouldn't dare to tell you to search... you know better than that
As far as the BT, it seems that it isn't a matter of drivers after all, but rather how 6.5 is handling them. Stick with the original drivers, I think that there are a few surprises in stock with the other BT stacks (Helmi's and broadcomm's)
Also, if I could recommend you Destinator 7, it seems to do just fine. I haven't tried Tomtom 6 or iGo 6 (all of which I used to use), but this one is very lightweight and the maps are not ridiculously big either.
Good to see you around buddy!!
Click to expand...
Click to collapse
Oh, I'm happy with iGO8 and the sexy female voice I have LOL and LiveSearch works awesome as well. They just updated again few weeks ago. Only thing I don't like about LiveSearch is it only saves 128MB on Storage Card. Everything over that gets downloaded on the spot and with the slow G connection of BA's, it can become a pain at times. But iGO8 Maps cover PR very well However, just to be nice, I'll try destinator. If you recomend it and Tony Cooks it, I'll eat it LOL
Umm btw, let me scoot to work... Later aligators
EDIT: Geez, I always have a second thought after pressing that darn Post Reply. I installed NF, its the same I had. Haven't seen any noticeable difference. A little higher build... Poofff Gone!
markanthonypr said:
<Edit> I've done some further testing as promised. Here is my finding:
*When the BTGPS Reveiver is connected to the phone, there is no indication on the BT Settings as that it is "Connected", however it is, as Live Search, Pharos, iGO8 and Google find it without any troubles.
*I tried to highlight the GPS Receiver and tap on CONNECT, but the softkey is greyed out(not available).
*I tried tap n hold over the Receiver with the same results, connect is not available.
Click to expand...
Click to collapse
well, when i'll flash to new build then i'll try this thanks
nothing to do, the GPS connects (1second flashing blu light), then the BA stucks on the passphrase window with the wait cursor, the GPS disconnects (fixed blue light) and then it enables standby mode...
frafor said:
nothing to do, the GPS connects (1second flashing blu light), then the BA stucks on the passphrase window with the wait cursor, the GPS disconnects (fixed blue light) and then it enables standby mode...
Click to expand...
Click to collapse
I use TomTom Bluetooth GPS and have not faced this issue.
Chef_Tony said:
i attached it for you, but be aware of the fact, that this is the basic version with a very xp like look for themes and how to install them go to: http://ppcsoft.narod.ru/english/
Click to expand...
Click to collapse
psShutXP is a bit annoying. I use this cab to soft reset & power off which is quite ideal for WM6.5 start menu I have repacked the cab files.
I've got the same problem and I think this is a problem GPS with MTK chipset. I've try 2 diferent GPS (qstarz and pentagram ) with MTK chipset and bouth work correctly only with WM2003 or on WM 5/6 from helmi with Helmi BT Stack 1,7.
With many ROMs GPS connect corectly and work to soft reset. After reset GPS connect for 1-2 sek and disconnect. It doesnt mater setting in GPS devices so i thing this is problem with receving BT data in our devices.
Also I try GPS from nokia LW-3 (or something like this) with sirfstar III and it connect without problem with diferent ROMS
I have a different problem since upgrading to Xplode's WM6.5 v21202...
I have working connections (not all at the same time) to three BT devices; Qstarz 51 ch gps, my old Tomtom BT gps, and the Stowaway (Think Outside) BT keyboard. All exhibit the same problem:
After a few minutes the connection seems to go and the device loses communication. It will then reconnect and continue fine for a while then same loss as before. This is particularly annoying when I'm using Tomtom to navigate!
I have not set up a serial connection for the Tomtom gps but did so for the Qstarz and keyboard. they all have the same comms loss.
I also have another BA running WM6.1 and this is fine with the devices...
Any suggestions please?
Thanks
Stevemann said:
I have a different problem since upgrading to Xplode's WM6.5 v21202...
I have working connections (not all at the same time) to three BT devices; Qstarz 51 ch gps, my old Tomtom BT gps, and the Stowaway (Think Outside) BT keyboard. All exhibit the same problem:
After a few minutes the connection seems to go and the device loses communication. It will then reconnect and continue fine for a while then same loss as before. This is particularly annoying when I'm using Tomtom to navigate!
I have not set up a serial connection for the Tomtom gps but did so for the Qstarz and keyboard. they all have the same comms loss.
I also have another BA running WM6.1 and this is fine with the devices...
Any suggestions please?
Thanks
Click to expand...
Click to collapse
Try a different BT stack. Some people have reported improvement in certain areas of functionality. However, everything comes at a price... the same people have reported that the range stinks. You will not be able to get much further than a couple of feet from your BA. Hope this helps...