Setup:
I've noticed my Qtek S100 (anansky rom with qtek 1.11 radio) stops playing music after receiving a call. Ive set up the toggle screen button in wmp and use it when having the phone in my pocket while using the headset. I've also set up wmp so that it should continue playing music after calls ended.
Problem:
Im listening to music, recieve a call, end that call, the music comes on again for about 5-10 seconds. then the phone goes into suspend mode and i have to get it out my pocket, turn it on, go back to wmp and press the screen toggle button again.
anybody else got this? anyone got a solution?
thanks
Sounds like a bug, where ending the call makes the device believe that there is nothing going on, although WMP is still playing.
A workaround might be to set the device never to suspend. But if you do that, make sure you remember to suspend it manually ;-)
Sometimes my phone turns on, displays call ID, and even rings via bluetooth, but it won't make an audible ring. I know that all volume settings are correct because afterwards my missed call sound plays.
Any ideas what is going on or how to fix it?
Hi, I get this too occasionally - all of a sudden I will get a voicemail message and the phone did not ring. then a few mins later I may get another call and it rings as normal...
I am running ringo, so if you are as well that might be the problem.
I use Dopod M700 and Handfree bluetooth Sony ericsson HBH-DS-970, I have problem about handfree.
After I compaired such devices, I could listen MP3 by DS-970 through WMP. It's worked and give qaulity sound! But, when I used DS970 as handfree/small talk, It's not worked. I could not answer/call by using DS-970. When incoming call while I listen MP3, WMP stopped but I could not recieved call through DS-970, I must recieved call by M700 only.
How should I do? Help me pleaseeeeeeeeeeeeeeee.
PS : I used official rom and did not install any program.
Go in Comm Mgr BT settings and refresh your DS970 services and ck: handsfree and wireless stereo, save. See if the phone part works.
And if that doesn't work, maybe since the DS970 can only be paired with one phone, it needs to be re-set - then re-paired. I think the instructions are on page 10...yep, found my book: Turn off headset, then press and hold the on/off for 5 secs - you will hear a long beep. Now it is ready to be paired. Next: press & hold the on/off and call handling button simultaneously for 5 secs. The headset will turn off.
When I turn on BT, I find it best just to go into BT devices and refresh the services on the DS970. It seems to behave better...
Thank you very much. I made follow your advise. It's almost ok, but when incoming call, no ringtone in both M700 and DS-970 but it show number and contact. In M700 vibrated only and no ringtone in both M700 and DS-970.
May M700 did not work with DS-970???
Any suggestion. Thank you.
Hello
I've similar problem, i can hear songs etc... i even hear the ring when somebody calls on my DS-970, but when i try to accept the call using DS-970, it is not being accepted, and if press the answer button again, the bluetooth gets disconnected and the phone starts ringing.
Not sure what's causing it.
I'm using O2 Exec with the latest rom.
Please guide
Greets
Hello
No problem i just found the solution to it:
Here's what I did:
* I deleted the HBH-DS970 from the list of BlueTooth devices
* Then I bonded them again (by setting the the little switch on the headset to the left and pressing the power button for about 5 seconds after it had powered on
* Now I move the switch over to the right
Now I can listen to music and when I have an incomming call, I get a short "beep", and I just press the mic button to answer. Then the music pauses, and resumes when I hang up.
Greets
funtoosh said:
Hello
I've similar problem, i can hear songs etc... i even hear the ring when somebody calls on my DS-970, but when i try to accept the call using DS-970, it is not being accepted, and if press the answer button again, the bluetooth gets disconnected and the phone starts ringing.
Click to expand...
Click to collapse
It happened to me when I tried DS970 at the SE shop today. Saddly that I was going to buy it
I am using Atom Life
I had this same issue with new SMS and solved it by making some dword on the registry.
However, now I seem to have the exact same problem with incoming calls.
I put my headphones on and listen to music.
I get an incoming call.
Answer it by pressing the button on the headset without looking at the phone.
Finish talking on the phone, call ends, music resumes.
Then, the phone is woken up and is playing around inside the pocket.
Suddenly the phone calls someone.
Not only that it opens up some programs etc.
How do I leave the screen off when I answer an incoming call?
Or, is there a way to lock it again when the call ends?
I guess I need to have the phone wake up when call comes in as I would want to see who's calling sometimes (when not listening to music).
Can't seem to get this working like it used to on every other phone I have ever used.
Pressing the "Select" button (mic button in headphone) during a call causes Spotify or a podcast to restart playing. It never answers or hangs up!
Anyone got a solution?