Successful mpc2003 update on a SX-56 with AT&T - MDA, XDA, 1010 Software Upgrading

Just wanted to say thanks XDA for the generic version of the Mobile PC 2003. I flashed my rom yesterday and it's doing a fine job.
Someone posted earlier on the forum that they could not get IE or GPRS to work after the flash. I ran into the same problem. How I got mine to work was to go into Setup Your Proxy Server and then check ONLY the this network connects to the internet. Leave "This Network uses a proxy server to connect to the Internet" unchecked. Works fine this way.
I ran into a similar issue when I flashed it to SER 1.2. All I did that time was leave APN blank. Then it worked fine from there.
Something I did notice on both ROM's. If you have the phone in the cradle, and power off the PC, it does not charge like it normally does with the OEM ROM. Any ideas on this?
I also bought and installed the MS Voice Command Software. I have to give them credit, even with version 1.0, I am very impressed. Works like a champ!
I do have one question, although I am running the latest RSU from AT&T, 20.10, I have never seen it available for download from there site or Siemans. Has anyone else noticed this?
When they do come out with an update for the RSU, where does one usually go to get it?
Thanks again XDA!
Randall

What rom version did you flash? I am an AT&T sx-56 user and I am very interested in which rom versions work and which version don't. I haven't seen many postings on this forum relative to AT&T and mpc2003 (or for that matter 2002).

Related

Wizard Tmobile Wifi

Hi everyone. I just bought the new Tmob MDA yesterday and have been tooling around tryin to figure the wifi thing out.
When i bought it from the store the salesperson said that the Wifi is only active when you have the Data plan activated..... Which kind of doesnt make sense. I understand the PRS side of it but not the Wifi side....
I downloaded the CABs and registry entries and all that good stuff, with no luck.
The latest thin I tried in order to connect to a network is install WoFo companion from Socket.
HERES THE CATCH!!!! The socket apprecognizes networx in the area, but the WM2005 doesnt allow it to connect. When you say connect the WM2005 Available Networx page is blank.
Can anyone help? I really need wifi on this machine....
thank you for listening.
Yes wifi should work out of the box to - b networks. Saleperson is wrong - that only applies to gprs as you said.
What reg tweaks and cabs did you install? that should be unnecessary unless you want to logon to g networks.
Try the registry wizard that will tweak for g and show wifi plugin on the today screen. http://forum.xda-developers.com/viewtopic.php?t=39725
use latest version r.
One thing it might be worth looking at is downloading and installing the latest T-mobile rom. My wizard refused to connect to my secured wireless network, unless I removed all security and made it completely open ( like that's a good thing to do in this day and age) Installed the latest ROM update, and I could connect a lot more easily.
After you get used to your wizard, I can heartily recommend installing the K-Jam rom, it seems a lot faster.
thx
thx for you replies guys. i just flashed the rom to the latest k-jam.
i knda prefer no to have any tmobile branding anyways.
everythingn worx fine now.

Internet fine on 3G, no internet on G.

I just got my 8525 on monday fron cingular, when I first got it I noticed that the internet will work fine on 3G but it wont work on G, for some reason on G it will time out when looking to load a page on IE and it wont receive or send emails either. So I said, what the hell, let me upgrade to WM6 and this should be solved, I was wrong, I have the same exact problem on WM6 and I've spent countless hours going thru all the threads looking for an answer and still nothing. Dont want to call CS since I'm on WM6 and they would start giving me crap about it. Anyone knows whats going on here? I can get internet fine on 3G and I could tether fine to my lappy but if I go out of a 3g and into a plain G network, it wont let me do anything online. Could it be software or hardware? If hardware, how would I go about returning since I upgraded to wm6?
Your help is greatly appreciated.
If you have HTweakC, check the Phone...GPRS/G3 Connection setting and tick Enable GPRS/G3 Auto Attach.
I found that i had the problem you describe when moving from the 3 network in Sydney (Aus) to a regional centre where only GSM/GPRS was available.
I'll try that and see if it works when I move to a none 3g zone. Thanks a lot.
That didn't fix the problem, still no internet when on G network and do have internet while on 3g network. Any other suggestions?
Which WM6 are you on ? I'd think that the Black 2.0 for Cingular might be best and with the 1.40 Radio.
Are you a new Cingular subscriber ? If you are maybe try your SIM in another phone. They might not have provisioned your account properly.
No, I'm not new to cingular and I'm using now the WM6 Black Edition. But dont think that matters tho since it was doing the same thing on wm5. Any suggestions?
Well, have read and gone thru countless threads and still no answer to this problem. Like i said, I went back to WM5 and still have no internet when on E but get lightning fast connection while on 3G. Has anyone experienced this before?
Did you solve the problem?
Diazman said:
Well, have read and gone thru countless threads and still no answer to this problem. Like i said, I went back to WM5 and still have no internet when on E but get lightning fast connection while on 3G. Has anyone experienced this before?
Click to expand...
Click to collapse
I use my 8525 in a non 3G network (GPRS/Edge) and I haven´t been able to have a decent connection since day 1 back in December. If you solve your problem please share the solution. Thanks
Maybe this will help
I bought my very own Tytn this week and got a mobile internet subscription with it. I can't seem to connect to any webpage using IE either.
I'm a Firefox fan and always use that wherever I am. So I decided to try the pocket version of that, which is called Minimo. it's on http://www.mozilla.org somewhere.
For some unknown reason, that solved my problem. IE still doesn't work, no matter what I try, but I can surf as much as I want on Minimo, which is fine for me.
Hope this helps.

Having problems 8525 tzones (wap proxy internet)

I do not know what the problem is… the tzones worked perfectly fine on my other pocketPC, no problems whats so ever, I put in the ip, the 8080 port for http everything else wap, secure wap, sockets using the same ip and the default ports, it worked 100%
Now with the 8525 (purchased a used one, needed one with edge and keyboard badly) I can not get any other third party browser to work properly, mini opera has major issues it will not even detect my net at all… I have tried different midlet with no success, I have set the proper connection as it works with IE but of course very buggy some sites I can not access and I will get many times the error “the requested page is too long URL= (the url) Status=62(hex)”
What should I do now? Minimo seems to be running quite bad, its either eating up too much resources or causing the device to almost freeze, it does run however.
I used to be able to go to every page with my other pocketPC phone, only difference is that it was on gprs and this is on edge, the settings I had were exact and both wm6
8525 is running vp3G 3.60.2 radio 1.50
I have tried Esmertec Jbed, the one that was given in a thread, it too failed with mini opera to get a connection
I guess the i300 used a good java manager? Or the standard one, I never had any issues or problems with java on that device at all…
Any suggestions? Any recommendations on ROM? And what java manager should I get? Jbed seemed really nice with full screen, any others I should give a go? Something that might have proxy ability maybe?
As it seems either IE is flawed with proxy and tzones (wap net) or the service gives some kind of errors… either way IE isn’t really usable, besides just maybe reading text if it goes to the page, most times I get a lot of hangs :/ and retries are required.
fixed problem... im not 100% sure but i used different rom Schaps_WM6Pro_WWE_3.60a-0823_Full and it works all 100% right out of the box
IE that is just like on my other phone, im quite happy that there is such a large selection of cooked roms \o/ only 2nd day having 8525 and i was able to put new rom. Great work goes out to everyone of course \o/
bonus points to anyone who could figure out why vp3G 3.60.2 didnt work? or maybe i should have done a hard reset on the device? as it was cleared prob just default settings/reset? Previous owner that i got to talk to and is here on forums used AT&T, he now has a kaiser go figure heh
T-Zones - Tytn - HOW??????????????
confused: HOW ??????????? were you able to get T-zones working on your Tytn???
My understanding is that Tmo disabled it for smartphones or pda phones.
PLEASE sent me details.
I pay for t-zones but cannot manage to get it on my 8525.
Thanks,
Charlie

Wlan problem, cant browse

Hi all, i've been searching and i cant find any info on this. I apologize if it is out there and i just didnt find it. If anyone knows of any threads, pls let me know. Here is my problem:
I recently upgraded my Hermes to wm6, i tried a few roms and settled for Schaps. Then i upgraded my radio, since my area of ceasars bay in brooklyn ny has the worst possible reception on the planet other than the south pole. I upgraded to 1.50 then down to 1.40, then up to 1.54.07, then back down to 1.48. Now, the problem starts.
ever since the upgrade to 1.54.07, i could not access the internet through the 3g/edge. i would get a "dialed modem ended session" or similar message. I do NOT have a data plan, but i was able to use it previously regardless and was charged per usage. After the upgrade, i could not use it regardless. Soo..i figured i could try something. I went on to ATT's site, and added a data plan to my acct. After that, the 3g/edge worked, but then my Wlan connection doesnt. Now, the question: DOES ANYONE KNOW WHAT TO DO? THanks in advance.
Try disabling the proxy.
Thanks, i reinstalled Schaps Rom and it was fine. i think it was because of a internet sharing cab that i installed.

Hd2 Telstra ROM 1.72.841.0 (82124)

Hi All
I need some help with my HD2.
Today I upgraded from stock rom to latest as version as on HTC website
I can't recall old version, anyway I am having an issue with this radio version which is 2.07.51.22_2
My exchange activesync keeps disconnecting, so my emails are arriving 3-4 minutes later.
I guess my question is?
Can i go back to older radio version without flashing, or worse case scenario could i downgrade to older rom?
I need some help guys.
Thanks
I am downloading now... Will try when down.
I cannot help you there, but have you tried sending a SMS? did you get a stupid notification of message being sent? I am trying to figure out a way to deactive.... No luck yet, waiting for HTC response
As for the Data sync I have had no issue as yet. I have found it a tad more reliable than 1.49. But I have only done a whole 2 hrs of testing
tmorgan4 said:
As for the Data sync I have had no issue as yet. I have found it a tad more reliable than 1.49. But I have only done a whole 2 hrs of testing
Click to expand...
Click to collapse
What a pain, so yours work ok, do you use activesync with an exchange server?
That's where my problem is.
It disconnects every few minutes, which obviouslyconsumes more battery power.
As for the sms sent notification I dont mid it.
I may downgrade to original rom, is it safe?
Thanks
host12 said:
What a pain, so yours work ok, do you use activesync with an exchange server?
Click to expand...
Click to collapse
Sorry I should have clarified. I link mine with my Exchange 2010 Server. I am getting emails as wanted.
That said I still can't sync SMS. Which is soemthing HTC is looking at and I haven't heard back in a while. I should email them to chase them up.
Hmm, I may try a hard reset tomorrow then.
Thanks
host12 said:
Hi All
I need some help with my HD2.
Today I upgraded from stock rom to latest as version as on HTC website
I can't recall old version, anyway I am having an issue with this radio version which is 2.07.51.22_2
My exchange activesync keeps disconnecting, so my emails are arriving 3-4 minutes later.
I guess my question is?
Can i go back to older radio version without flashing, or worse case scenario could i downgrade to older rom?
I need some help guys.
Thanks
Click to expand...
Click to collapse
Hi there, having exactly the same issue, did you find a solution to this other than changing out the ROM? Greatly appreciate your posts.
Telstra ROMS on HD2 are stuffed!
I've heard from a mate who works in Telstra ROM development that the HD2 images are not fully tested.. and therefore go to market with communications flaws.. eg every time you try and sync your mail or use as a shared internet device it struggles as the radio version is substandard to the rest of the Image.
Do yourselves a favour.. HSPL it... Find one of the wonderful roms that the guys/gals on here do.. and you will love using the hardware you have purchased. The HD2 is so powerful and should not be ruined by Telstra's lame attempt at a ROM.
Seems they have put way more effort into the Android ( desire ) but its still no HD2.
englundm said:
Hi there, having exactly the same issue, did you find a solution to this other than changing out the ROM? Greatly appreciate your posts.
Click to expand...
Click to collapse
Yep fixed it, apologies forgot to post solution for my issue.
After trying reflashing with new ROM, downgrading to old ROM and still having same issue, that's right after downgrading...
It clicked, see I bought device and started using activesync after about 2 months.
Before that, I had an issue with my 3G internet connection not working at all.
Weather updates, internet access, hotmail emails etc.
To fix that other issue I had to create a new internet connection.
By the time I got to use activesync I had a new internet connection, I was not using stock telstra connection.
Therefore to fix on new ROM version I created a new connection, and magically started working up to now with no issues.
And it is true telstra are bloody hopeless at testing pre-releasing ROMs.
If you need more information let me know.
Thanks
Would greatly appreciate any help in two areas:
- firstly my HD2 internet stuff is nor working at present. Clicking many of the BigPond links just brings up IE with wap.telstra.com/wap?..... and ends up just sitting there until timeout. Can you post details for setting up new internet connection that fixed this.
- which ROM did you go to. Hw did you load this. I cannot get my HD2 to connetc to Win7 x64 WMDC. Can't even see any mention of the device in the device mgr, though it did say it saw it at ones stage. Reading numerous posts - seems to be a lot of people having issues in this space..
hylandgj said:
Would greatly appreciate any help in two areas:
- firstly my HD2 internet stuff is nor working at present. Clicking many of the BigPond links just brings up IE with wap.telstra.com/wap?..... and ends up just sitting there until timeout. Can you post details for setting up new internet connection that fixed this.
- which ROM did you go to. Hw did you load this. I cannot get my HD2 to connetc to Win7 x64 WMDC. Can't even see any mention of the device in the device mgr, though it did say it saw it at ones stage. Reading numerous posts - seems to be a lot of people having issues in this space..
Click to expand...
Click to collapse
Ok.. have to say, the wap.telstra addresses are all old and many are discontinued. All those apps are simply web shortcuts that should point to a m.bigpond address.
Firstly.. you need to do a few things..
1) You will need to HSPL your phone- ( like flashing a bios ) I just used the hspl.zip.. Instructions are easy and straight forward, make sure you follow them perfectly.
2) Flash your radio to something better i did the 2.10 ( Again.. instructions need to be followed.)
3) I then had a look and found a rom on the forum ( energy GTX ) which seems to have all i want and is fast.. after you flash it.. reboot it.. and it will autoconfigure to the Telstra network.. and BINGO.. FAST Phone!!
host12 said:
Yep fixed it, apologies forgot to post solution for my issue.
After trying reflashing with new ROM, downgrading to old ROM and still having same issue, that's right after downgrading...
It clicked, see I bought device and started using activesync after about 2 months.
Before that, I had an issue with my 3G internet connection not working at all.
Weather updates, internet access, hotmail emails etc.
To fix that other issue I had to create a new internet connection.
By the time I got to use activesync I had a new internet connection, I was not using stock telstra connection.
Therefore to fix on new ROM version I created a new connection, and magically started working up to now with no issues.
And it is true telstra are bloody hopeless at testing pre-releasing ROMs.
If you need more information let me know.
Thanks
Click to expand...
Click to collapse
Hey there, thanks for this. With the new 1.72 ROM the Telstra inbuild connection set ups seem to work, can browse internet and activesync will connect when I prompt it OK (with 1.49 I had to setup a new connection with Phone line (GPRS) and telstra.wap manually (via the Telstra tech's)). I have two HD2's one running 1.49 (with this manual config) and the other 1.72 with inbuilt Telstra config's - the delay problem u described with email arriving 3 or 4mins later is still happening on 1.72 despite it appearing to connect fine, almost like the message from the exchange server is being ignored. Watching Activesync on the 1.72 when I know there is new email and there is this odd sequence, seems to check and recheck emails 2 or 3 times when just one new email has arrived but doesn't seem to pick up the trigger from the Exchange Server that new email has arrived? Does this delay still happen for you, what connection configuration did you select? Thanks v.much.
I want to know what are the real benefits or improvements on upgrading the ROM on Telstra branded HD2? Because I bought an new, unlocked HD2 from a clearance shop in Melbourne and had been into it for just 2 days. Bening a long time WM user, I got used to it and it really seems to work without any problems at the moment, so does the new ROM brings some dramatic improvements, new and fanastic functions or what? I am not after cosmetic things at all, need to know real benefits comared to old ROM.
rxsoob said:
I've heard from a mate who works in Telstra ROM development that the HD2 images are not fully tested.. and therefore go to market with communications flaws.. eg every time you try and sync your mail or use as a shared internet device it struggles as the radio version is substandard to the rest of the Image.
Do yourselves a favour.. HSPL it... Find one of the wonderful roms that the guys/gals on here do.. and you will love using the hardware you have purchased. The HD2 is so powerful and should not be ruined by Telstra's lame attempt at a ROM.
Seems they have put way more effort into the Android ( desire ) but its still no HD2.
Click to expand...
Click to collapse
Thanks, almost sold on this path at this point given the headaches, was reluctant to head down this HSPL path, is there a good reference for setting up a custom ROM specifically for Telstra's network?
Activesync usually never works with the standard Telstra connection in the HD2 Telstra ROM.
As far as im aware, it is set up to go through a Telstra proxy server, which doesn't allow the Activesync traffic.
You must set up your own stock standard connection to telstra.internet APN. Which bypasses the proxy that they have on their preloaded connection. You will however not be able to use the Telstra internet shortcuts to My Account, BigPond etc, as they require authentication with their proxy server.
So as far as I have found, with the stock Telstra HD2 ROM its a case of either one or the other: your activesync working, or your Telstra links working.
englundm said:
Thanks, almost sold on this path at this point given the headaches, was reluctant to head down this HSPL path, is there a good reference for setting up a custom ROM specifically for Telstra's network?
Click to expand...
Click to collapse
I'd like a response to this too as I'm looking at HD2 Android and need a radio upgrade from for it to run, but don't want to lose Telstra Rural coverage. The HD2 is a great device, but few Winmo6.5 app developments compared to Android or iphone.

Categories

Resources