I have 2 versions of the XDA / Qtek 1010:
* O2 XDA pilot unit with ROM version 3.12.07 and Radio version 4.06
* Qtek1010 commercial unit with ROM version 3.18.04 ENG and Radio version 3.25.01
O2 XDA provides good response time but not the Qtek1010 which is more recent.
I have downloaded official release from O2 site of ROM version and Radio version 4.06 onto my Qtek1010, but it does not improve the performance.
1) How can I download ROM version 3.12.07 and Radio version 4.06 onto my Qtek1010 ?
2) Are there special hidden settings/instructions on XDA Radio version 4.21 or on Qtek1010 Radio version 3.25.01 to improve response time?[/list]
what do you mean by performance ? ... is it the Windows response or signal strength or GPRS speed or ..... what ???
BTW, Qtek ROM 3.18 + RSU 3.25 is the best and the most stable PPC2002 setup ... but depends on which area and operator you are dealing with.
Thanks for your reply.
By response time performance I mean the time it takes to display a new page (example: around 25 secs on Qtek and 14 secs on XDA).
I am in France and I used 2 different Tel providers, it did not make any difference.
Note: there is a mistake in my initial question: I downloaded from O2 site Radio version 4.21 (not 4.06) on my Qtek, and I am looking for how to doawnload 4.06.
Hi ...
Up to my information Qtek R3.25 was made for Asian networks but it works out side as well. The O2 R4.21 is the best for Europe and it works in the Middle East as well. So, it's what is the best fit to your provider.
Also, you may check your GPRS setting with your provider and you can compare the speeds by accessing this page www.texan.net/speed.htm from your XDA.
Good luck ...
By response time performance I mean the time it takes to display a new page (example: around 25 secs on Qtek and 14 secs on XDA).
I am in France and I used 2 different Tel providers, it did not make any difference.
Click to expand...
Click to collapse
hhhmmm page ?
do you mean a new page in a word doc ?
or a internet page as in WWW?
if it's word then it sounds like an os issue
if it's www then it's a ISP / RSU issue most likely
if it's WWW then i'm sure you could find some pages or programs to measure the speed of your GPRS
Related
Hi Guys,
Just to say THANKS to everyone out there, not only the developers but the normal mortals too - who put in effort to help people here.
I have uploaded the Windows mobile 2003 to my site. Its on a super mega link (great words ) I get 1meg a sec+ when i download from it at work !
http://www.ali.nildram.co.uk/xda/
Cheers Guys
OK it's seems to upgrade the Radio any issues? What if I upgrade the radio to ATT's? Ideas thoughts anyone?
Salam
Thanks Ali-Butt
Othman
since phone upgrade i have noticed that gprs is a tad faster. 8)
Does it support Sim Tool Kit
Hi Ali,
Does this upgrade have the sim tool kit?
Thanks in advance :?:
isn't this the same version everyone has been using?
I just have to run the executable file right? I don't need an SD Card writer or anything for this download? just my normal connection and activesync? what if the upgrade screws up? can i reload the old ROM image? and where do i get it!
Thanks a lot!
hi from Riyadh
Hello again
well, what i have notice there are more then one version of WM2003
one of them which i downloaded from http://members.lycos.co.uk/xdarom/ where i couldn't downgrade using the nornal method and i was force to use SD Card to go back to my previous ROM but the other version which i downloaded from this FTP Server 195.64.88.44 xda/xda works pretty good and i was able to downgrade to XDA-Developers Special ROM version 1.2 with no problems and without using SD Card.
thanks again for sharing
Othman
http://www.pocketpc4arab.com
Is it possibile to upgrade to wm2003 thru USB cradle ? My current version for Asian XDA is:
ROM version: 3.14.17 ENG
ROM date: 10/11/02
Radio: 4.17
Protocol: 32S54
Has anyone tried to upgrade an asian XDA (EN version) ? Any problems ?
Thanks,
I upgraded my XDA last night via my USB cradle. I had NO problems at all. Took a little longer than normal :?: But other than that it was fine.
Gil
Gil,
did you use Ali file uploaded on his site ? Is your XDA UK or Asian version ? Which nr ?
Thanks,
no service
Can someone help a newbie out here - I installed the WM2003 no problems and then installed to 4.21.00 radio stack
but now my phone get's no service any ideas? Im in Texas on T-mobile
Please, see this link may be useful for you
http://xda-developers.com/forum/viewtopic.php?t=1687&start=75
brix3 said:
Is it possibile to upgrade to wm2003 thru USB cradle ? My current version for Asian XDA is:
ROM version: 3.14.17 ENG
ROM date: 10/11/02
Radio: 4.17
Protocol: 32S54
Has anyone tried to upgrade an asian XDA (EN version) ? Any problems ?
Thanks,
Click to expand...
Click to collapse
I had the same set upwith yours previously. I upgraded to SER 1.2 and WM 2003 after that. I also upgrade my radio stack to 4.21 from O2 UK. But now, I am back with SER 1.2 and Radio stack 4.21. I wish Icould go back to my old Radio Stack 4.17.
With 4.21 Ilost the "G" and signal strength for GPRS.
I hope my experience helps.
Beeheij, why didn't you keep the 4.17 radio version with WM2003 ? Was it not running properly ?
I think it's always dangerous upgrading the radio module with newer version dedicated to other regions (UK)
Thanks,
brix3,
I want to back to 4.17, but I cannot. Somehow during the process of rolling back I was kicked out.
As for the WM2003, the problem was in the SMS mode. When I picked a phone number, the "+"sign in my contact was not transferred tothe address in the SMS. So each time I wanted to send SMS, I had to correct the phone number.
My Battery Pack was not working. It hung my XDA.
Hope this helps
Has anyone in the US used or done this upgrade? Since it also upgrades the Radio Stack I'm just wondering. If GPRS is getting dropped as stated in other posts it is more that the network drops you or you lose data connection between cells, or the network has a load balance that give placement to voice users over data when bandwidth is needed. Not so much that your radio stack does it.
On the other hand just incase anyone wants to prove me wrong :wink: who in the US has upgraded their radio stack to O2 4.21 and experienced a better performance than AT&T's radio stack (speed stability as staed on their website) :?: This means you probably already had to manually switch the default band 8) first, right? :x
Let me know I love to be wrong :shock: ......I'm only that much smarter than I was yesterday :roll: :lol:
I'm a little confused. I upgraded to XDA v1.2 and my Device Informations are:
ROM Version: 3.17.03
ROM Date: 05/15/03
Radio Version: 6.18.00
Protocal Version: 324e4
How is it that my radio version is so much higher?
-
i must admit this version of ppc2003 is the dogs danglys compared to the old ozone version
Phoxie_Phreak said:
I'm a little confused. I upgraded to XDA v1.2 and my Device Informations are:
ROM Version: 3.17.03
ROM Date: 05/15/03
Radio Version: 6.18.00
Protocal Version: 324e4
How is it that my radio version is so much higher?
-
Click to expand...
Click to collapse
as far as i know XDA v1.2 will not touch your Radio, it will just replace your old CE ROM with the new one which has lots of cool stuff.
regards
Othman
I have just ugraded my Qtek ROM to vers. 4.00.01 (pocketPC2003) and the RSU4.21.
BUT since then I cannot see my mobile carrier anymore Orange CH (switzerland), but all the others...
Could that come from the new soft not supporting dualbandGSM 1800 ?? or naything else.
Thanks for you help !!!!
PS CAN I DOWNGRADE MY ROM TO 3.17 FROM THE O2 web site??
i believe that the current 4.00.01 is with the US radiostack
leaving your phone at 900/1900 and not 900/1800 which is the EU std
European XDA/MDA with Radio Update
Same here in Germany. First I upgraded my TMO (Germany) MDA to ROM 4.00.10 without the radio upgrade. It worked (and still works ) very well with the old (by only supported :? ) radio V3.23.00 protocol 32S54. The only thing I noticed is: the carrier (T-Mobile Germany) is not displayed (in the Today screen) and the connection bar graph is changing very often from "good" to "worse". :shock:
After this success I upgraded also the radio unit, but I better have not done that! No (neither 900 or 1800) carrier is detected by the phone anymore I tried a lot in the bootloader but nothing helped me
So I downgraded the radio to 3.23.00 with the RSU utility which is downloadable from TMO Germany. And everything is okay again
Chris
Radio Stack 3.17 FR
Seems the same problem... but luky you are, as I don't have the older RSU available...
Does anybody know where I could find the RSU 3.16 or 3.17 FR ??
Thanks in advance,
I don't know if it works but why aren't you flashing the RSU with the one from the english o2.co.uk site ore the german one? Isn't there a support page for your french xda? (From witch provider was the xda sold? AFAIK orange has its own new SPV)
The English rsu seems to be ver 4.21 and is located here http://www.o2.co.uk/personal/xda/docs/Radio_Stack_Upgrade_v421.zip
The German RSU is also V4.21 but I don't have a direct link. Just click http://www.o2online.de/o2/business/datenloesungen/xda/downloads/index.html and go ahead.
The RUU seems to have the version 3.17 (UK) or 3.19 (Germany)
Look here http://xda-developers.com/rom/ RSU-> the "Phone BIOS" and RUU->"The PDA sw" So I think the RSU is not written in a specific language but only for a special region (US and Europe). But the RUU is.
HTH, Chris
problem solved
I actually could solve the problem by going in the bootloader and switch to DualBand GSM 900/1800. BUT then you CANNOT go in the BAND menu or it automatically switch you back into 900 ...
Laurent
First of all, I'd like to thank everyone who posts to this forum - I've been reading it for a month or so now and am constantly impressed with the quality of the knowledge here, especially the developers...
I have a QTEK 1010 bought here in Dubai, UAE, with the following device info:
ROM version: 4.00.01 ENG
ROM date: 05/16/03
Radio version: 3.23.01
Protocol version: 32S54
I have found that browsing using IE feels slower, and have the feeling that this version of the ROM does not work well with the radio version. Does anyone reading this forum live in the UAE? I'd like to upgrade the Radio, but need to know which version works best with Etisalat (our Telco).
Any comments much appreciated!
Thanks, Doms...
P.S. I'm going to upgrade the ROM to 4.00.05 when I get the opportunity
hi, i am from dubai and i am using 4.00.1 from t-mobile and 4.21 from o2, so far everything fine just when i reset the t-mobile logo appears.
do you have bluetooth option in that version and your version was already installed or you upgraded yourself?
Use the o2 Radio Version 4.21 it will work fine...
Thanks for the responses guys. Does this new radio version provide any benefits over the one I have?
kamiar said:
hi, i am from dubai and i am using 4.00.1 from t-mobile and 4.21 from o2, so far everything fine just when i reset the t-mobile logo appears.
do you have bluetooth option in that version and your version was already installed or you upgraded yourself?
Click to expand...
Click to collapse
1) The QTEK does not support Bluetooth, and there is no way to make it work on a QTEK either.
2) There is no Bluetooth option in any of my menus or settings (I would expect this as my device does not support Bluetooth). Windows PPC2003 is supposed to be able to support Bluetooth, however: http://www.microsoft.com/windowsmobile/products/pocketpc/about/2003/bluetooth.mspx
3) I upgraded to the 4.00.05 version of Windows PPC2003 myself using Jeff's ROM Kitchen (thanks Jeff!) http://cuba.calyx.nl/~jsummers/ROMkitchen/
Hi, Once i had 4.00.01 and in connection setting i had Bluetooth option but ofcourse it was not working, the other thing is do you know any camera work with SD port of Qtek? i mean something availble in the market.
4.21 is more stable i think.
cheers,
I had some problems when making calls on my QTEK yesterday. While in a voice conversation audible clicking noises can be heard and after about 1 minute of conversation the quality of the call deteriorates until the other party cannot hear me. I'll try upgrading the radio...
I don't know about the camera support using the SD slot in the QTEK. My first instinct would be to say no, it's not possible, but I can't confirm that...
I bought a Qtek 1010 in Dubai Duty Free the other week. I've since upgraded the ROM using ROMkitchen and am delighted with it. One thing I did notice though is that the speakerphone functionality (claimed in the Qtek handbook) doesn't seem to work. I didn't try it before I upgraded so can someone tell me if it works with the native UAE ROM code, and if so does anyone have any idea how I could get it working again?
David
I own a QTEK in the UAE and here is my share to those asking about OS and Radio updates here:
I upgraded from
ROM version: SER 1.2
Radio version: 3.23.01
To
ROM version: 4.00.10 ENG (T.Mobile Test)
Radio version: 4.21.00 (O2 UK)
Everyting seems to work fine apart from 2 minor issues so far:
Make sure you set your band to 900Europe as the default is 1900North America in phone/tools/options
The signal fades out sometimes but doznt affect the reception
No G signal but GPRS is OK.
GPRS stays connected; have to turn phone off and on to disconnect.
Advice:
Read a lot before you upgrade. This forum has a wealth of information.
Cheers
ridaz
Hi all,
After doing a look around on O2, Orange and T-Mobiles websites in the UK I got the following version information:
CE ROM:
O2: 1.30.107
Orange: 1.30.174
T-Mobile: 1.30.232
Radio:
O2: 1.09
Orange: 1.13
T-Mobile: 1.10.03
I know that Radio version is subjective but I assume that 1.13 would have some bug fixes over 1.09?
Also is 1.30.232 actually newer/better than 1.30.107 or again is this subjective?
Are there newer versions than this around?
I am looking to use the latest AKU2 with the best Radio ROM and my own custom Ext-ROM.
Thanks in advance!!!
G
1. get radio 1.14 from somewhere.
2. get a wm6 rom from somewhere (ver. 2.xx.xxx)
3. :¬D
gquipster said:
Hi all,
After doing a look around on O2, Orange and T-Mobiles websites in the UK I got the following version information:
CE ROM:
O2: 1.30.107
Orange: 1.30.174
T-Mobile: 1.30.232
Radio:
O2: 1.09
Orange: 1.13
T-Mobile: 1.10.03
I know that Radio version is subjective but I assume that 1.13 would have some bug fixes over 1.09?
Also is 1.30.232 actually newer/better than 1.30.107 or again is this subjective?
Are there newer versions than this around?
I am looking to use the latest AKU2 with the best Radio ROM and my own custom Ext-ROM.
Thanks in advance!!!
G
Click to expand...
Click to collapse
Before you do anything,m read the wiki and the threads on the newer ROMs - it is not as simple as you think, particularly with the radio ROM.
Hiya,
I don't particularly want Crossbow (don't see the point, the Universal is slow enough without that), or particularly want AKU3, doesn't really offer anything I want or need, want I'm really after is just a nice stable AKU2 installation.
Will give Radio 1.14.10 a shot along with the newest AKU2 I can find on the operators websites.
Anyone got any ideas on getting a backup should anything go wrong? ActiveSync's backup option of course has been removed in WM5 (*GREAT* idea MS)
Thanks
G
Radio 1.14.10 seems to be from Vodafone in Italy, anyone know if this is actually compatible with O2 in the UK?
gquipster said:
Hiya,
I don't particularly want Crossbow (don't see the point, the Universal is slow enough without that), or particularly want AKU3, doesn't really offer anything I want or need, want I'm really after is just a nice stable AKU2 installation.
Will give Radio 1.14.10 a shot along with the newest AKU2 I can find on the operators websites.
Anyone got any ideas on getting a backup should anything go wrong? ActiveSync's backup option of course has been removed in WM5 (*GREAT* idea MS)
Thanks
G
Click to expand...
Click to collapse
I found AKU 3 much better to use (and faster) than AKU2
gquipster said:
Radio 1.14.10 seems to be from Vodafone in Italy, anyone know if this is actually compatible with O2 in the UK?
Click to expand...
Click to collapse
The 1.14.1 ROM on the FTP site works fine with O2UK. If you are using Jwright's latest ROM, I would use 1.13.
Hi guys,
I have upgraded succesfully my QTek 9090 BA to WM6 following the wiki, have some issues with WiFi and would like to upgrade my ROM...I guess...I'm new on this PDA world so still confused with terms.
I'm following the Wiki and got stuck here: http://wiki.xda-developers.com/inde...0.ROMx20.thatx20.willx20.workx20.forx20.mex3f.
My Device ID returns only:
P H 2 0 B W W E AT%CID? 5 . 6 0 . 0 0 1.12.00 % 4
So for what I understand:
MOdel PH20B
Lang: WWE (English)
Operator: AT%CID?
Rom Version: 5.60.00
Extended Rom version: 1.12.00
Radio Version: 4
Is this correct?
If so, I don't understand if this: BA_WWE_BP_12200_169_10602_SHIP.exe would be good for me...
Can you please help?
Thanks!
The Devicedata file was need in the old days (WM2003).
Now on WM6 (and WM5) the file does not matter or make much sence.
BA_WWE_BP_12200_169_10602_SHIP.exe
This is a 2003 rom with the rom vesion of 1.22 (making it old even for WM2003 as 1.4 was the last I can remember), the Radio is 1.602 (which is even older than your 1.12 (1.15 is the current one))
Best bet for you is the WM6 rom and up your radio to 1.15 (wiki will tell you how).
Hope that helps
Hi! and really thanks! It confuses me how 1.6 can be older than 1.15...?? Anyway, I updated to Radio rom 1.15, however reading more I found that it has nothing to do with WiFi...
Now, I seems to be understanding more and more about the Roms, extendend roms and radio roms with TypeI and II.
I have been looking at the FTP site and what I still need to understand is what Rom to use...how do you difference those codes? I'm using rar 20226...is this ok? Any newer ROM or more stable?
And what defines the WiFi driver? The ROM itself? I have the problem that my WiFi signal is very poor...
Thanks again
There are a few thiings that are wrong with the BA as it is end of life and if it was not for XDA-Devlopers it would be dead.
Wifi has its issues there is a work around and that has something to do with the way you start it. (to be honest I can't remember what you have to do but search will help)
Bluetooth is the other know issue, if you don't want to make friends then the best way to do this is post a "My Bluetooth does not work thread". That a low post count will get you flammed at big time.
The Type I and type II roms were based on the format of the roms and the tools we used about 3 years ago. Some smart guy worked out you could bypass this whole porcess (the checking of the country code) by using a flash program form some other HTC device.
So by the time WM5 came out then the "on id exe" solved that issue and we have been using it ever since.
The radio you talking about is 1.06, if you want to look at some of the roms we had found and posted on the FTP (unitll M$ got us to close it) then try this link.
http://wiki.xda-developers.com/index.php?pagename=BA_Versions
Extra rom was a carrier based issue (wiki has a whole section on it) however WM5 and WM6 did not use the same system so the space was reused for the rom (is one of the steps in the upgrade process).
As for the best rom, this is up to you.
Xplode used be active and now its Sun_dream.
Both of these guys know there stuff and have my Full respect.
Have fun