Help with DeviceData file - MDA III, XDA III, PDA2k, 9090 ROM Development

Hi guys,
I have upgraded succesfully my QTek 9090 BA to WM6 following the wiki, have some issues with WiFi and would like to upgrade my ROM...I guess...I'm new on this PDA world so still confused with terms.
I'm following the Wiki and got stuck here: http://wiki.xda-developers.com/inde...0.ROMx20.thatx20.willx20.workx20.forx20.mex3f.
My Device ID returns only:
P H 2 0 B W W E AT%CID? 5 . 6 0 . 0 0 1.12.00 % 4
So for what I understand:
MOdel PH20B
Lang: WWE (English)
Operator: AT%CID?
Rom Version: 5.60.00
Extended Rom version: 1.12.00
Radio Version: 4
Is this correct?
If so, I don't understand if this: BA_WWE_BP_12200_169_10602_SHIP.exe would be good for me...
Can you please help?
Thanks!

The Devicedata file was need in the old days (WM2003).
Now on WM6 (and WM5) the file does not matter or make much sence.
BA_WWE_BP_12200_169_10602_SHIP.exe
This is a 2003 rom with the rom vesion of 1.22 (making it old even for WM2003 as 1.4 was the last I can remember), the Radio is 1.602 (which is even older than your 1.12 (1.15 is the current one))
Best bet for you is the WM6 rom and up your radio to 1.15 (wiki will tell you how).
Hope that helps

Hi! and really thanks! It confuses me how 1.6 can be older than 1.15...?? Anyway, I updated to Radio rom 1.15, however reading more I found that it has nothing to do with WiFi...
Now, I seems to be understanding more and more about the Roms, extendend roms and radio roms with TypeI and II.
I have been looking at the FTP site and what I still need to understand is what Rom to use...how do you difference those codes? I'm using rar 20226...is this ok? Any newer ROM or more stable?
And what defines the WiFi driver? The ROM itself? I have the problem that my WiFi signal is very poor...
Thanks again

There are a few thiings that are wrong with the BA as it is end of life and if it was not for XDA-Devlopers it would be dead.
Wifi has its issues there is a work around and that has something to do with the way you start it. (to be honest I can't remember what you have to do but search will help)
Bluetooth is the other know issue, if you don't want to make friends then the best way to do this is post a "My Bluetooth does not work thread". That a low post count will get you flammed at big time.
The Type I and type II roms were based on the format of the roms and the tools we used about 3 years ago. Some smart guy worked out you could bypass this whole porcess (the checking of the country code) by using a flash program form some other HTC device.
So by the time WM5 came out then the "on id exe" solved that issue and we have been using it ever since.
The radio you talking about is 1.06, if you want to look at some of the roms we had found and posted on the FTP (unitll M$ got us to close it) then try this link.
http://wiki.xda-developers.com/index.php?pagename=BA_Versions
Extra rom was a carrier based issue (wiki has a whole section on it) however WM5 and WM6 did not use the same system so the space was reused for the rom (is one of the steps in the upgrade process).
As for the best rom, this is up to you.
Xplode used be active and now its Sun_dream.
Both of these guys know there stuff and have my Full respect.
Have fun

Related

Which is a recent / suitable ROM and Radio upgrade for QTEK

Hello folks,
QTEK 1010 bought from Dubai
Model PW10A1
ROM version 3.16.52 ENG
ROM Date 03/10/03
Radio version 3.19.01
Protocol version 32S54
My questions: -
For me, which is a suitable upgrade...
From www.myxda.com:-
ROM version 3.20.06
Radio version 4.21
OR
From www.carrierdevices.com.au:-
CE Upgrade File : RUU_CEv3.18.04wwe_Qtek_SHIP.exe
Radio Upgrade File : RSUv1.15_(GPRS_T32500_ENG).exe]
Thanks
Faisal
Re: Which is a recent / suitable ROM and Radio upgrade for Q
faisal said:
Hello folks,
QTEK 1010 bought from Dubai
Model PW10A1
ROM version 3.16.52 ENG
ROM Date 03/10/03
Radio version 3.19.01
Protocol version 32S54
My questions: -
For me, which is a suitable upgrade...
From www.myxda.com:-
ROM version 3.20.06
Radio version 4.21
OR
From www.carrierdevices.com.au:-
CE Upgrade File : RUU_CEv3.18.04wwe_Qtek_SHIP.exe
Radio Upgrade File : RSUv1.15_(GPRS_T32500_ENG).exe]
Thanks
Faisal
Click to expand...
Click to collapse
You may use any ROM Updgrade, you may even want to cook your own ROM, but please do not think of performing a radio stack upgrade if your present radio is working well and giving you a trouble free service.
Hi guys,
I 'm in same situation but with higher versions, and can hardly wait to get a new 2003 ROM.
I can't just play with my XDA as I use it all the time for work and it's pretty stable so far. I just also can't tell that the ROM is 'totally' separate from the RUU in WM2003.
So the question is: is there any one here who has gone through a 2003 upgrade for Qtek 1010 to tell us his thoughts after the upgrade ?
I read a lot about the stability of 4.00.16 ENG, but all been written was for O2 R4.21 or T-Mobile R6.xx. Did any one in this region (Mid East) with R 3.2x went into this upgrade ? and what is the current status ?
Thanx all ....
Latest ...
I tried upgrading to 4.00.11 ENG from the kitchen ... no matter how many trys it just restarts and gives the same error message "Can't open USB/com port ..." ...
Do I miss anything ??
more update ...
Tried to cook the new ROM as .nb1 file and used Xdatools from the kitchen to flash my device .... same result :? :evil:
Is it possible that there is a ROM protection on my XDA ??? :shock:
Biso007 said:
more update ...
Tried to cook the new ROM as .nb1 file and used Xdatools from the kitchen to flash my device .... same result :? :evil:
Is it possible that there is a ROM protection on my XDA ??? :shock:
Click to expand...
Click to collapse
Hi Biso007,
Look at the IDIOTS GUIDE at:
http://www.xda-developers.com/forum/viewtopic.php?t=3171
and follow the instructions thoroughly one by one and you can't go wrong, it did work for me, I was in the same situation.
Samohile - Thanks. It is good advice to not mess with the radio if you can help it.
My only problem is that my device periodically shuts off. Then pressing the power button soft boots it. I cant tell for sure but it seems that this happens after an incoming or missed call. It seems that other friends using ROM 3.18.04 and Radio 3.25.01 (like our friend biso007 here) seem to have very stable systems.
I can try upgrading the ROM only and see what happens but the information at www.carrierdevices.com seems to imply that both ought to be upgraded at the same time. I notice it is an Australian site. Does that matter? Also, the version of the radio upgrade is a bit confusing, at least from its name. (Radio Upgrade File : RSUv1.15_(GPRS_T32500_ENG).exe] ). I wonder what this RSUv1.15 translates into since the name of the exe file for the ROM is nicely descriptive of the version (3.18.04).
Any advice in this would be very welcome..
Well i am using WM2003 4.00.11 and its working fine for me no problem i cooked in the kitchen you just need to read arround this great forum for a whgile on topics such as upgrades and ROM to know exactly what you are dealing with and then you will able to upgrade smoothly.
:wink:
Hi ARZLEB
I read lots and lots about upgrade lessons but none of them worked for me .... I got an advice to use SD card with bootloader as it's the only working way. Now I wonder why the EXE method was created!!
I see that u got the 4.00.11 working. Did u upgrade it using EXE or SD card. Any help would be so appreciated ... thnx
Well i used the EXE methode the file i cooked in the Kitchen but i didnt change the version i left as 3 at the bottom of the page it works fine i upgraded from 3.XX to 4.XX then i downgraded from 4.00.11 to 4.00.05 then upgraded again all using EXE format so far working great.
i will be honest with you i know about the SD methode very well but never tried it so u have to make more search on this issue.
If you need anything more plz message me anytime and i will be more then whilling to help you step by step...
faisal said:
Samohile - Thanks. It is good advice to not mess with the radio if you can help it.
My only problem is that my device periodically shuts off. Then pressing the power button soft boots it. I cant tell for sure but it seems that this happens after an incoming or missed call. It seems that other friends using ROM 3.18.04 and Radio 3.25.01 (like our friend biso007 here) seem to have very stable systems.
I can try upgrading the ROM only and see what happens but the information at www.carrierdevices.com seems to imply that both ought to be upgraded at the same time. I notice it is an Australian site. Does that matter? Also, the version of the radio upgrade is a bit confusing, at least from its name. (Radio Upgrade File : RSUv1.15_(GPRS_T32500_ENG).exe] ). I wonder what this RSUv1.15 translates into since the name of the exe file for the ROM is nicely descriptive of the version (3.18.04).
Any advice in this would be very welcome..
Click to expand...
Click to collapse
Faisal sorry for very late reply.
I have flashed my Qtek (bought in Abu Dhabi) with several versions of roms cooked in kitchens (Jeff's and Stefans's), but I have finally settled with ATT release wm2003 Siemens SX56 upgrade. It comes with most of the bugs fixed (except multiple reset bug) and is quite stable. I almost never have to reset it. You can flash the ROM only by SD card method though. You can try it. It's always a good idea to flash using SD card method. USB method using ProgramA is not very safe. I guess the network in Pakistan is compatible with the one in the UAE, so you can safely use it, if you don't mess up with the Radio Stack. My Radio is 3.23.01 and I have no problems with that.

Need help upgrading my Qtec 2020i

Hey!
iv been looking over this forum for about 4 hours, and i am totaly confused :S
what do i need to upgrade?
it doesnt have to be a norwegian rom, as long as it works
im new to "the game" and i know nothing about my phone, other then that it is a Qtec, and its called 2020i
the rom version is 1.11.00 WWE
Radio version: 1.02.00.
wich by the look in this forum, seems somewhat old
i know this place isnt a helpdesk, but iv been googling and surfing forums for 2 days. and this place looked like it could maybe help me.
thanks for any respons
-Bateau
welcome
ur right its the place where u will learning everything about ur phone
before 6 month i was like u know nothing
but now i'm not expert but i know very very more
i have 2020i we called it alpine i upgrade my rom with pug rom (O2 1.11.162 uk radio 1.04) and its great
Best Alpine ROM
Here is the direct link to the PUG modified ROM, which is the best you get
Standard 162 ROM, Radio 1.04, improved camera and extra Bluetooth profiles:
ftp://xda:[email protected]_Fixed.rar
Check this link for plenty of info.
http://forum.xda-developers.com/showthread.php?t=258480
DAz
could you desribe the instalation process or a link where it placed
ps
i also donot now any sing about my qtek 2020i
Help a Noob
Hi,
I recently aquired a Qtek 2020i, and this is my first time in the PDA world, but it hangs all the time. So I'm hopping you guys can help me to update the ROM to something more stable.
I've been around the forum and found out how to backup my ROM to a SD card, so that is what i'm going to do first... to be safe.
Now I've downloaded this ROM version. And, by the read me file included in the rar file, it will be very simple to run the update... Actually I thought it would be very much harder
The question is:
Must I thake any special security steps other than the original ROM backup? Or can I just go for the update?
Thanks for any help you can get me
Done
Update successfull
I'm gone evaluate this ROM... Hope it's better than original

Imate Jamin Rom

Hello all
I have just purchased an Imate Jamin , saying goodbye to my treo 600.
The rom details on my Imate Jamin are as follows :
Rom Version: 2.13.9.23 WWE
Rom date : 2/23/06
Radio Version: 1_02.20.21
Protocol Version : 4.1.13.9
Ext. Rom Ver : 2.13.9.123
IPL 2.13.0001
SPL 2.13.0001
GSM 2.20.21
Is there any rom update available for my device?
Also, there is a significant lag when I press click to take photo. Is there any way of improving/fixing this.
I would also like to know how to uninstall programs like Voice dialer and extended rom ?
Thanks
Mike Keller
Hi,
first of all I would like to recommend the WIKI - Most important thinks about your new PPC could be found there.
There are some newer Roms at the FTP-Server.
And finally: Use the search function of the forum, most questions are answered yet.
Have a lot of fun with your new prophet.
Ciao
Help to avoid problems in upgrade
I'm sorry , I know my question could be considered " another question made without a previous search .." but I spent some hours to try to understand without been able to summarize what is really the situation; so , please , take few second to read here:
a)I have a JAMin updated only one time from IMATE official site without any problem
b) actual rom is :
Rom Version: 2.13.9.23 WWE
Rom date : 2/23/06
Radio Version: 1_02.20.21
Protocol Version : 4.1.13.9
Ext. Rom Ver : 2.13.9.123
c) I consider my current configuration as "enough stable" and I use :
calender/contact/ IEexplorer/ilauncher/SBSH weather/pocket stocks/batterystatus(overclock to 286)/tomtom/spb backup/and a lot of other nice applications.
d)I do not want to spend a lot of time recovering critical configurations and/or soft/hard resetting the device many times ; I'm not so expert ( as this question confirm !) to manage rom problems on my device, I have to use also for work and I cannot have problems.
with this description , I would ask to the experts here what they suggest me to do in term of opportunity to upgrade and wich kind of risk could I take.
I'm ready to restart installation of described programs , but I would not manage it too many times...
last questions ; could I only obtain A2DP stereo bluetooth performance remaining with my current ROM situation ? are there other important improvement to take into account ??
As you can imagine , any comment / suggestion / etc is very aprreciated.
Thanks in advance
....thanks again for any answer...!!
tower5 said:
....thanks again for any answer...!!
Click to expand...
Click to collapse
As far as the ROM goes, I had the same ROM as you and I switched to the Dopod ROM (see on my signature). I think it works better and faster than the iMate ROM. There is a new "official" Qtek ROM available now. It is suppose to be a good one too. Check the ftp site.
thanks to matterhorn , but I need to know what I have to do to install a rom not " imate" ; do I need particular software to do it? must I unlock or "prepare" my jamin to accept the rom you use , for example?
thanks
please...any other answer ?
thanks a lot !!!!

Performance related to ROM version?

Hi all,
First post here after discovering this wonderful resource!
I am in the UK and have an O2 XDA Mini S, it was one of the first ones released I think.
I took off all of the O2 stuff as soon as I got it as it was extremely slow!
While it is ok most of the time, the performance can get pretty bad sometimes, seems like theres a memory leak somewhere.
Once rebooted its ok again for a few days.
The IPL and SPL version are both 1.05. I take it this is a very old (First?) version, and was wondering if upgrading it to a newer ROM would help the performance at all?
Other specs are as follows...
Rom Version - 1.5.4.2 WWE
ROM Date - 11/08/05
Radio version - 01.09.10
Protocol Version - 4.0.13.20
Ext ROM version - 1.5.4.102
Thanks...
enCrypt said:
Hi all,
First post here after discovering this wonderful resource!
I am in the UK and have an O2 XDA Mini S, it was one of the first ones released I think.
I took off all of the O2 stuff as soon as I got it as it was extremely slow!
While it is ok most of the time, the performance can get pretty bad sometimes, seems like theres a memory leak somewhere.
Once rebooted its ok again for a few days.
The IPL and SPL version are both 1.05. I take it this is a very old (First?) version, and was wondering if upgrading it to a newer ROM would help the performance at all?
Other specs are as follows...
Rom Version - 1.5.4.2 WWE
ROM Date - 11/08/05
Radio version - 01.09.10
Protocol Version - 4.0.13.20
Ext ROM version - 1.5.4.102
Thanks...
Click to expand...
Click to collapse
Can't say I've used a 1.x rom version on my Wizard, but I have used a couple of official 2.1x roms, as well as Faria's WM5 rom and now I use Zoki's NBD WM6 rom. I can definitely say that I've seen performance improvements as I upgraded along this path. I've also found memory mgmt seem to be better on WM6 and I actually see memory reclaimed often, where this never happened before WM6.
Another thing to do is use batterystatus or omap to (slightly) overclock. I overclock to 260MHz using batterystatus.
Thanks for that Titus666,
Bit of a newbie with these things so excuse the question...
Does the ROM contain the OS then? eg. I have WM5 on mine. If I updated to another ROM would it update the OS to WM6 too?
Think I'll have to try a ROM update or 3 then, and try not to break it!
enCrypt said:
Thanks for that Titus666,
Bit of a newbie with these things so excuse the question...
Does the ROM contain the OS then? eg. I have WM5 on mine. If I updated to another ROM would it update the OS to WM6 too?
Think I'll have to try a ROM update or 3 then, and try not to break it!
Click to expand...
Click to collapse
Yes, a ROM would contain the OS as well as the supporting apps and drivers like Bluetooth and Wifi etc. So there are many ROMs that are all WM5 but are all different, and similarly there are lots of ROMs that are WM6 but are all different as well.
So yes, if you want WM6, you will need to upgrade the rom. There are a number of sticky threads in the Wizard forums that spells out what needs to be done and what the traps are (and there are lots of traps), so read read read is my advice.

Speed of BA w/WM2003?

By virtue of my 2 x XDAII's failing for whatever reasons (abuse, long-life, etc.), I had to shift to one of my XDAII's (BA) with base OS:
=======================================
WM2003 SE
Version 4.21.1088 (Build 15045.2.6.0)
Processor: Intel(R) PXA263
Memory: 125.77 MB
ROM v.: 1.40.00 WWE
ROM date: 03/10/05
Radio: 1.12.00
Protocol: 1337.42
ExtROM v: 1.40.923 WWE
Model No.: PH20B
=================================
I have found that this phone is WAY SLOWER than the XDAII - it's really incredibly slow! (And I had my XDAII with less RAM available!)
I have had problems connecting in Mumbai (India) with Vodafone (this happens with other units (EDGE modem/XDAII) too, but this is *extreme*!
I have to shut off the radio (put into flight mode) then back on, in order to connect to GPRS, or it simply will not connect!
I have tried flashing the ROM for the radio to 1.15, but I have to edit the file on the unit, else I get the error - it's really very time-consuming!
I'm afraid that all my time that I put into this unit will go to waste if I do not have a stable unit that I can rely on....
Any feedback on this?
Thanks!
Try the T-Mobile's rom or PDA2K's rom in Blue Angel Upgrading section.
The O2 rom bugs me too much.
Also install O2 Asia upgrade (I guess u r running a non asian one thats why BA isnt showing compatibility with ur network. Try upgrading to WM5/6 and see if u have luck on GSM/GPRS since majority of asian networks phail with BA WM5/6/6.1/6.5
dark_prince said:
Try the T-Mobile's rom or PDA2K's rom in Blue Angel Upgrading section.
The O2 rom bugs me too much.
Click to expand...
Click to collapse
Yes, it's the O2 ROM - not sure if this one was the one I bought in SIN or in the UK...any ideas, or way to tell?
Both were O2 branded....
dark_prince said:
Also install O2 Asia upgrade (I guess u r running a non asian one thats why BA isnt showing compatibility with ur network. Try upgrading to WM5/6 and see if u have luck on GSM/GPRS since majority of asian networks phail with BA WM5/6/6.1/6.5
Click to expand...
Click to collapse
Which is the best upgrade (simplest) to do, stable, with almost no bugs, with a similar to original config/options?
TIA!
well first of all if you want less bugs do not install the OEM crapware (the extrom software) you may even resize the extrom partition to 128 k to use the space as storage
http://alevri.atspace.com/ - updated Shipped roms list and mirrors which i will keep online
My advice is to flash the latest t-mobile 1.42 rom delete radio and extrom update files and flash rom only
xplode said:
well first of all if you want less bugs do not install the OEM crapware (the extrom software) you may even resize the extrom partition to 128 k to use the space as storage
http://alevri.atspace.com/ - updated Shipped roms list and mirrors which i will keep online
My advice is to flash the latest t-mobile 1.42 rom delete radio and extrom update files and flash rom only
Click to expand...
Click to collapse
Wow - thanks for the tips - wonderful to have the gurus of the BA helping us!
So, how does one delete the radio files?
I unzipped and extracted, then ran the .exe file, which started the RUU update.
xplode said:
well first of all if you want less bugs do not install the OEM crapware (the extrom software) you may even resize the extrom partition to 128 k to use the space as storage
http://alevri.atspace.com/ - updated Shipped roms list and mirrors which i will keep online
My advice is to flash the latest t-mobile 1.42 rom delete radio and extrom update files and flash rom only
Click to expand...
Click to collapse
explode... i have 02 XDAIIs, what your advice for ROM on my IIs? and btw i cant expand my extrom to 128K using tools on XDA-DEV (extrom_unlocker.cab and Repart_doc.exe) had any idea?
Stevo.Mksr said:
explode... i have 02 XDAIIs, what your advice for ROM on my IIs? and btw i cant expand my extrom to 128K using tools on XDA-DEV (extrom_unlocker.cab and Repart_doc.exe) had any idea?
Click to expand...
Click to collapse
Why can't you? Keep in mind that you can only do this only in 2003. So, from what I have read in your other posts you are either in 6.1 or in 6.5 (going back to 6.1). You have to use the Repart_doc and the ExtRom Unlocker tools in order to do so.
Aside from everything, I have been using xplode's version of 6.5 and I am pretty happy with it (both stability and usability)-wise.
If you are absolutely disgusted by it, you should try sun_dream's 20578. Best 6.1 that I have had...
Hope this helps.
@egzthunder1: did back to original rom wm2003 02XDAIIs and other cooked rom in wm2003, but it failed due to physical logic reason when im runnig repart_doc.exe. but when im expand my SX66 its work!! weird thing.
Stevo.Mksr said:
@egzthunder1: did back to original rom wm2003 02XDAIIs and other cooked rom in wm2003, but it failed due to physical logic reason when im runnig repart_doc.exe. but when im expand my SX66 its work!! weird thing.
Click to expand...
Click to collapse
That is the weirdest thing... it should work fine since it is the same phone...

Categories

Resources