Related
Hi,
I've recently purchased an xda 2 from O2 it came with a free bluetooth headset, but I've a few problems and wondered if anybody could answer a couple of questions.
1. The little blue flashed LED, is it meant to flash all the time that bluetooth is being used? It seems to start flashing and then just stop.
2. When I go into my bluetooth settings and turn it back on when it's switched itself off I don't get the LED flashing then I go back into the settings again and it says that it's off. Is this what it's meant to do?
Any good guides/tools about using bluetooth with this device?
Beginning to pull my hair out and I've not much to spare!
Cheers
Marc
Free? from O2? how?
1stly howd u manage 2 get sumit out of O2 for free? i would be worried about that allready!!
what bt Headset did u get? with mine, i get a blue light flashing intermitently when the headset is turned on, and it doesnt change when im making a call.
which bt settings are you talking about? obviously you need to have bonded with the device, which the headsets instructions should cover.
to turn bt on the phone on you click on the bt icon at the botom of the active screen and select the On radio button.
if headset profile is enabled then there should B a small blue headset symbol next to the bt symbol, if its not set, or not turned on then it will be gray. if it is gray then click on it and hopefully it will turn blue to activate the headset profile.
there are sum interesting bt tools around, but the "recomended" setup is the Pocket Bluetooth Tools for the O2 XDA II and the MDA II which is available from here:
http://bluetooth.i-networx.de/index_e.html
I hope that helps.
Smiley
sounds like you are using bluetooth tools and have got the clock symbol live (not greyed out), it times out the internet connection but doesnt seem to tell o2's software that it turned it off so when you go in, it quite often seems to think its on when its actually off !!
Hi, I didn't have the bluetooth tools loaded, but I've downloaded them from the site you suggested and everything seems to work better.
The headset did indeed come free from O2 I was quite surprised too.
I've think I've attached an image of it, not sure what make it is does BlueTrek sound good?
Yeah that sounds about right, their website doesnt actually give any details, helpfull as allways!! :roll:
neway, have u got everything working properly now?
Smiley
Hmm...somebody had the same problem with his Bluetreks G2 and the XDA2.
He did a special pairing mode and it solved the problem.
I think its in the G2s instruction manual.
Had a look at the manual can't see anything special in the way that you pair the G2 to the XDA2.
Do you use this bluetooth toolkit?
It still seems flaky, I tried answering a couple of calls with the headset yesterday and nobody could here me at the other end of the phone. Sometimes I get it where the phone says that I have "no bluetooth available" I have to remove the battery and insert it again. Is this normal?
Regards
Marc
Marc,
I get the same symptoms you describe when I'm using ActiveSync with my XDA2 over bluetooth, but never with my HBH-65 BT headset. I'm not using any additional bluetooth tools or anything like that. Just the standard built-in bluetooth on my original (November 03) ROM.
Sometimes if my bluetooth ActiveSync connection is idle for a while the connection drops and the flashing blue light on the XDA2 goes out. However, if I tap the little blue BT icon at the bottom of the Today screen, the setting shows that BT is still turned on. I have to tap it on, then off then on again to cycle the status and convince the machine that bluetooth is really back on again. :? This sounds like the problem you describe.
However, no problems like this with my BT headset, which works perfectly.
This isn't any help, but at least you know you're not alone!
Does anybody know if a registry entry exists to turn the bt headset profile on and off?
I've got headset working now but it switches off frequently.
Cheers
Marc
I have a BlueTrek G2 for my Imate and it's working with no problems at all ... I tried BT tools but didn't find it useful as I thought it will give me a "Hands free" profile but it doesn't :x
mokl: maybe it's a ROM issue ... mine is 1.72 WWE, what's yours ?
The rom version is 1.60.00WWE
Just to let everybody know, I had some major problems with my bluetooth on my XDA 2. Tried everything, eventually got a replacement from 02 and the new one works fine now, so it must have been a hardware fault.
Does anyone here use their MS Mobile 2003 “smart” phone with a Bluetooth car kit?
I wonder if you can help me…
With my old Nokia phone, it used to activate the connection to the car kit when I turned on the engine.
However, on the MDA Compact, I have to go to Bluetooth, select the car kit, and select “Set as Hands-free” every time I get into the car, witch is rather annoying.
Does anyone know how to make this automatic? Is there a third party utility perhaps that would monitor the availability of the car kit every so often, and connect to it automatically when it is available?
And another question, does anyone know of a good utility for voice dialling?
I tried Microsoft Voice Command 1.5, it is alright, more or less (apart from awful recognition of spoken numbers, even if spoken by upper class English people) it does recognise the contact names, witch is all that I need - however, I cannot get it to react when I press the action button on the car kit.
I still have to take the phone out of my briefcase, and hold it in my hand, witch is illegal whilst driving.
My dream application, would be something basic, that I can train for certain contacts that I call regularly (like with my old nokia phone, which appeal glows by the minute) – as this way, thick eastern European accents do not matter ;-)
Thanks in advance for any pointers!
I have the MDA Compact Working with the CK7W form Nokia.
Works good exept the voice dailing, You can thakeand disconnect a call with the remote controle.
But do you have to manualy connect to the car kit every time you get into the car?
Once it is connected, I can accept and end calls using the action button. so that is not a problem
No just hold the center button of the remote for 2 seconds, than it will connetct again
tbouman said:
I have the MDA Compact Working with the CK7W form Nokia.
Works good exept the voice dailing, You can thakeand disconnect a call with the remote controle.
Click to expand...
Click to collapse
Hold on a minute, I have the same Nokia car kit, and my Compact when connected suffers badly with reported echoes at their end, not mine.
Do you have this problem?
I was to believe that this was a common problem not resolved yet!
Mike.
I'm gonna test this tomorrow in my shop, I will place a list with phones(other than Nokia) that will work with the CK7W[/quote]
My car kit is CK-1W
I am generaly happy with it, apart from the fact that on the MDA I have to manualy connect every time I get into the car.
I used it with many different phones, and it works fine.
so I think that it is the bluetooth manager of the MDA that is to blame.
my compaq Ipaw bluetooth manager was the best!
but this one, I cannot even get the activesync to work...
For the manual connect you have 2 blame the BT manager in w2003se.
I have good results with:
Nokia CK7W:
Qtek 9090
Qtek S100
Sony Ericsson P910(I)
Sony Ericsson P700i
Samsung D500
HP6340
Are there alternative bluetooth managers?
or a reg. hack I can implement?
thanks
Hmmm, I Don't know...Anyone?
Apparently not…
I had the same problems with my mr handsfree genius car kit, and i thought it was the fault of the car kit.
Just upgrade your rom to 1.06 and all your problems will disappear most likely.
Which rom do you have?
Andre
I have an old ROM.
however, all my atempts at upgrading it failed.
my device ID is something like TMOB-005, not 001
cracked update exe file did not help, running the scripts to modify the ROM files did not help...
in the end I felt inept, and gave up ;-)
i wounder if any of you can help, my bluetooth doesn't seem to be working, have tried now from 3 phones to send things over to my M500 using bluetooth and it just gives a connection error message on the phone i try to send from? why is this? is getting v.annoying?
also why can't i send things from my phone using bluetooth like a picture for example? is this just me being stupid and missing the option somewhere?
thanks,
tom
turn on BT and make discoverable,
Turn on accept incoming beams
use beam to send stuff via BT. (Its not just for IR)
cheers for that - all is now working fine
Tom
no worries.
the beam thing got me at first too, ended up phoning orange about that....the resolution was the level three support guy told me that the m500 must not support file transfere over bluetooth!!!!
:shock:
soon found out about the beam
Imp
Hi All,
I have been reading a lot of messages on both 8525 and 8125 trying to isolate the issue and there doesn't seem to be a straight asnwer anywhere and hence I am trying to get the attention of the users here...
I have a pioneer navigation system with a bluetooth built-in. My previous phone (blackberry) and my wife's treo650 both stay connected with car's bluetooth when on call (never a disconnect). But my new 8525 gets disconnected mid-call (usually after 2 to 5mins, but have also seen a disconnect within 1min). That is, it does pair with the car kit and when there is no call going on, the bluetooth connection never dies. This disconnect only happens mid-call, almost all the times.
I have the latest ROM (1,34.502...., radio: 1.16), got the phone about 2 weeks ago from Amazon.com. Called cingular and they say could be faulty phone and I have searched other forums like audi message board where their car kits are also having the same disconnect problem with 8525, so I doubt this is a single phone issue.
I have taken the 'band' hack and forced the phone to be in either GSM or WCDMA mode and in either modes, the phone still exhibits the same problem (there might not be any connection between the two at all, bluetooth with GSM/WCDMA, but thought there might be some weird connection...but not the case thankfully).
I read somewhere about some bluetooth tweaks on 8125, but never found what those were. I need some help here otherwise I am going to return the 8525 and stay away from it. I need the bluetooth to work efficiently.
thanks for all your help
Phal
San Jose, CA
please help
I really need some help, clue or direction on solving or at least isolating this bluetooth issue. I love the 8525 but if I cannot fix this bluetooth mid-call disconnect issue, I will unfortunately have to return, which I don't want.
What headsets the 8525 works fine with (no drops mid-call)? May be that is a starting point.
Please also give me some links to 8125 tweaks that some talked about? pof/other moderators/anyone?
thanks a lot in advance!!
Phal
I have an Motorola H700, and every once in a while it will disconnect, looking at the phone after that, BT is turned off, turn it back on and it works again...
There are problems with the hardware and the API used to access it, good phone, but I don't think it was ready for the market yet when they released it. It is likely to be corrected in the next ROM release, last I heard from Cingular is mid 2007, but by the way things go, prolly around late 07/early 08.
I'm having similar issues with the BT headset I use, which is a Samsung WEP150. It'll drop midcall to the handset. I'll look and BT is turned off.
The only remote correllation I've found is that it seems to occur when I've received a new email or something a la ActiveStink.. And I haven't really been able to confirm that... But I have definitely noticed it happening then though.
my 8525 does this as well with my factory BT in my 05 Acura TL. Kind of frustrating, have not been able to figure it out yet.
Problems w/ Audi BT as well
Same issues with my Audi Q7 BT. I have seen posts in this and other forums blaming the MS bluetooth stack.
My 8525 worked flawlessly with my Garmin NUVI 660, never disconnected or failed to connect automatically. This is frustrating.
8525 Fix
I had the same problem with the 8525 and my Pioneer Avic-Z1 bluetooth kit.
I hacked the registry to force the bluetooth radio to stay ON, rather than going into sleep mode. This seems to have fixed the problem (although with limited testing at this point).
My calls would consistently disconnect with 2-4 minutes. After the hack, I've had 2 45-minute+ conversations with no trouble.
Here's the fix... install a registry editor (like PHMedit), and add a DWORD here:
HKLM\System\CurrentControlSet\Control\Power\State\ Suspend
Add a DWORD called btl1: (note the colon, the colon must be there), with a DWORD value of 2.
Good luck!
My Q7 as well i took the advice of wolfgram and did this to my phone i will let you know how it works it would be a shame to give up this phone but it is really useless if this feature does not work right.
Well this is what i did i did what wolfgram said and it still cut out but not as much so i took the checks off in the advance power mode and never let the phone go to sleep and it works all the time. HTC needs to upgrade thier bluetooth setting not to go to sleep. It must stay active at all times MY phone book and all other info posted into my Q7 with no issues at all and it even sees the bluetooth b4 the MMI system in the car Boots up..
Lance
Resolution I think
I turned off 'Making device discoverable to other devices' and it seems to have solved this problem, I am using the phone with a parrot kit and it kept disconnecting now it works all the time.
Treo 750 doesn't have this problem
Well, hopefully you owners of Hermes have figured out the fix. I had to return it and now got the Treo 750 and can gladly say the problem is not there. The treo 750 has the v1.2, but I guess following the replies here, that possibly Palm fixed the problem by keeping the BT radio on at all times.
In any case, here is the post I wrote in avic411.com forum - if you want to see any follow up responses by other owners..
http://avic411.com/forum/viewtopic.php?p=24170
cheers
Phal
Bluetooth cut out
I am having the problem too with the garmin Nuvi and the Tytn - which is ineresting seeing as how one poster had no problem with the Garmin device. Here is something else that is interesting - I did not have the problem when I had the HTC 1.18 Rom installed. After I flashed the HTC 1.35 Rom, the problem began. I have already tried upgrading my firmware on the Nuvi - that did not help. I also use a Nokia 800 bluetooth headset - and that never cuts out with either ROM. I will try turning off the bluetooth discovery first. If that does not work, will try editing the registry. Keep you posted.
Turning off bluetooth discovery did not work.
Turning Off Bluetooth Did Not Work For Me Either
this worked for me.....
http://forum.xda-developers.com/showthread.php?t=247520&page=10
drains the battery quicker, but no more bluetooth problems.....
Hey guys, has anybody found a solution for the auto turning off of the BT in suspend mode? its gettin really annoying
Hi all,
I know there are plenty of threads about the TyTN bluetooth issues, but my questions differs in two ways which I have yet to come across:
I do NOT have M$ VoiceCommander installed (and don't want to install it)
My bluetooth issue relates to my car's handsfree feature - my TyTN randomly connects and disconnects. Apparently Audis, VWs, BMWs, and Acura's all suffer from this this problem.
The situation:
When I start my car, the phone will successfully merge with my TyTN. Approximately 30 to 60 seconds later, the connection will be lost. Shortly after that the connection will re-establish itself, then it will disconnect itself a short period later. This pattern repeats endlessly.
I've tried each of the following Tweak programs but none have helped.
jetwaremobile
Tweak2k
HTweakC
I've heard that there is some kind of registry tweak that will prevent the bluetooth stack from disconnecting from my car's handsfree feature, but after looking for about 2 days now, I can't find it. Can anyone help?
thanks.
jm
Yep, got exactly the same on my BMW 630....
Can t find any tweak but....
I am a heavy email user (thru BlackBerry connect) and I noticed that
the higher the number of messages stored, the higher disconnections appears.
At the same time, the TyTn is slower and slower....so my idea that this is related to some timeouts somewhere....
For your complete info, the MS bluetooth stack in my previuos S100 have able to.....immobilize my 630 !!!!!!!!! yes, incredible...
The MS stack messed up with the BMW bt ...and this later would stay ON for ever...even after switching car s power off.
This was sucking the car s battery untill the car would start !...
BMW could not reset the BT module unless disconnecting battery....but...then the active steering had to be re adjusted with the proper BMW computer...
This is a real story.
johnmclean said:
Hi all,
I know there are plenty of threads about the TyTN bluetooth issues, but my questions differs in two ways which I have yet to come across:
I do NOT have M$ VoiceCommander installed (and don't want to install it)
My bluetooth issue relates to my car's handsfree feature - my TyTN randomly connects and disconnects. Apparently Audis, VWs, BMWs, and Acura's all suffer from this this problem.
The situation:
When I start my car, the phone will successfully merge with my TyTN. Approximately 30 to 60 seconds later, the connection will be lost. Shortly after that the connection will re-establish itself, then it will disconnect itself a short period later. This pattern repeats endlessly.
I've tried each of the following Tweak programs but none have helped.
jetwaremobile
Tweak2k
HTweakC
I've heard that there is some kind of registry tweak that will prevent the bluetooth stack from disconnecting from my car's handsfree feature, but after looking for about 2 days now, I can't find it. Can anyone help?
thanks.
jm
Click to expand...
Click to collapse
I have the same problem with a CK3100 kit, don't have a solution, but would like one, didn't have this problem with a Jasjar nor Wizard
TyTN bluetooth | random disconnect when using car handsfree - more details
Thanks for the replies so far.
Although the following thread did not help me with my problem, it might help one of you. If you're having problems mostly related to issuing voice commands using M$ VoiceCommander, I think there *might* be a solution in that other thread for you.
Just to reiterate my problem; my TyTN keeps randomly connecting and disconnecting from my car's built-in hands free bluetooth device.
There was a time when if i managed to made a call after first starting the car - before the first random disconnect - the phone would remain connected until the next time I started the car. That no longer appears to be the case.
-jm
I solved the BT problem with my Orange SPV M3100 by setting it to never switch off the display automatically (only switching off the backlight after 20 seconds or so). I also use an in-car charger to power the TyTN. The car is an A6 with RNS-E (BT enabled) and TyTN works fine and never loses the BT connection as long as the display is active.
This is a mid-term solution though and I'm still eagerly waiting for a ROM update that will solve the problem for good.
Has anyone tried a ROM with aku 3.3?
jasonrhcastle said:
Has anyone tried a ROM with aku 3.3?
Click to expand...
Click to collapse
Yes.
And on my CK3100 I now no longer get disconnects. I did have to uninstall jetware as it wasn't reliable. My TyTN now connects perfectly and no longer drops.
One thing I did find is that the TyTN hates it when more than one handsfree device is in its trusted list. Make sure that the ck3100 is the only handsfree device paired.
http://forum.xda-developers.com/showthread.php?t=247520&highlight=bluetooth+keeps+disconnecting
ajax007 said:
I solved the BT problem with my Orange SPV M3100 by setting it to never switch off the display automatically (only switching off the backlight after 20 seconds or so). I also use an in-car charger to power the TyTN. The car is an A6 with RNS-E (BT enabled) and TyTN works fine and never loses the BT connection as long as the display is active.
This is a mid-term solution though and I'm still eagerly waiting for a ROM update that will solve the problem for good.
Click to expand...
Click to collapse
I've tried changing the automatic switch off setting and it made no difference on my SPV M3100 (with Parrot CK3100) - I reckon that the external power is what fixed your problem (this has worked for others too).
Sadly it's not a convenient fix as I like to leave my phone in my pocket when I'm in and out of the car. Orange say there is no 'issue' so there's no sign of a ROM update but HTC know of the problem but I have to wait for Orange to release their ROM update. I can't use the HTC update. If only us Orange users could tell them enough times they might listen now that some AKU 3.3s are being released. Orange technical department won't speak to end users like me - they have actually refused to discuss it with me and just pass messages back and forth from customer relations. Any other ideas?
A solution - thanks to Parrot
Yippee - thanks to Parrot I have got a solution to the TYTN / CK3100 problem (my phone is the Orange SPV M3100).
As Orange and HTC can't find any solution I kept asking Parrot for ideas. Their excellent customer service department tried various settings which made no difference until I was offered a trial of some beta test software called VCF creator. Once you have the VCF from the PC's Outlook you just need to beam it by BT across to the CK3100 and alter some settings (takes 5 minutes maximum). The small sacrifice is that you don't have auto-synchronisation so if your numbers change a lot you will need to do another VCF upload. The extra bonus benefit is that all your numbers will be grouped together. So, for example, you access someones name and then you can see their mobile/home/work number rather than having a separate line in the main list for each phone number. The problem is a result of how Windows Mobile phones provide the data. With this bonus you can then use voice activation to input a name followed by a keyword mobile, home, work etc. Fantastic!
587dan said:
Yippee - thanks to Parrot I have got a solution to the TYTN / CK3100 problem (my phone is the Orange SPV M3100).
As Orange and HTC can't find any solution I kept asking Parrot for ideas. Their excellent customer service department tried various settings which made no difference until I was offered a trial of some beta test software called VCF creator. Once you have the VCF from the PC's Outlook you just need to beam it by BT across to the CK3100 and alter some settings (takes 5 minutes maximum). The small sacrifice is that you don't have auto-synchronisation so if your numbers change a lot you will need to do another VCF upload. The extra bonus benefit is that all your numbers will be grouped together. So, for example, you access someones name and then you can see their mobile/home/work number rather than having a separate line in the main list for each phone number. The problem is a result of how Windows Mobile phones provide the data. With this bonus you can then use voice activation to input a name followed by a keyword mobile, home, work etc. Fantastic!
Click to expand...
Click to collapse
If you use the Jetware BT software you can do the same thing e.g. beam the whole contact list in one go and then set the Parrot to not sync by choosing the Ericsson No Sync profile. This is how I have mine set up, also with the Jetware software it sends over the Service Provider, Battery and Signal strength settings to the Parrot, something which the native stack doesnt do.
Solution for this
Hey all, i have purchased a parrot 3100, the software in it was 1.6, i had the same problems but it's greatly and successfully solved using the new jetware 1.3 . i don't know if i can post some linx here, but here you go, if this is illegal for this site please remove them
http://rapidshare.com/files/30296941/JetWare_1.3.rar
http://www.megaupload.com/?d=PL5UX5KC