Succesful unlock of 3.17.03 // 4.01 using usb... - MDA, XDA, 1010 Software Upgrading

Dear All
Thanks to those of you who have helped me with advice over the last few days. I have just successfully unlocked my xda in the following manner:
- upgraded from rom 3.02.00 to 3.17.03 via O2's website (because you can do this using usb and I don't have a serial)
- installed xdaunlock.exe on the pda
- hey presto - seems to be working fine (on Orange in Denmark)
I now have the final dilemma of whether to upgrade the radiostack from 4.01 to 4.21 (didn't do this previous to running xdaunlock.exe as I'd read in a couple of threads that 4.21 disables the unlock mechanism). So I have a final question to you all about what I will get out of upgrading from 4.01 to 4.21?...
Thanks in advance,
Tim
P.S. It's not possible to search for numbers through the threads of the forum - it would be a great help if this were enabled... :wink:

Since I upgraded the stack I think I am getting slightly better signal bars on the screen but I dont think my signal is any better in reality, others may have a different experience, also I seem to have developed an echo since upgrading the stack, I dont hear it but the person I am talking to does.

Related

UAE: Best Radio version?

First of all, I'd like to thank everyone who posts to this forum - I've been reading it for a month or so now and am constantly impressed with the quality of the knowledge here, especially the developers...
I have a QTEK 1010 bought here in Dubai, UAE, with the following device info:
ROM version: 4.00.01 ENG
ROM date: 05/16/03
Radio version: 3.23.01
Protocol version: 32S54
I have found that browsing using IE feels slower, and have the feeling that this version of the ROM does not work well with the radio version. Does anyone reading this forum live in the UAE? I'd like to upgrade the Radio, but need to know which version works best with Etisalat (our Telco).
Any comments much appreciated!
Thanks, Doms...
P.S. I'm going to upgrade the ROM to 4.00.05 when I get the opportunity
hi, i am from dubai and i am using 4.00.1 from t-mobile and 4.21 from o2, so far everything fine just when i reset the t-mobile logo appears.
do you have bluetooth option in that version and your version was already installed or you upgraded yourself?
Use the o2 Radio Version 4.21 it will work fine...
Thanks for the responses guys. Does this new radio version provide any benefits over the one I have?
kamiar said:
hi, i am from dubai and i am using 4.00.1 from t-mobile and 4.21 from o2, so far everything fine just when i reset the t-mobile logo appears.
do you have bluetooth option in that version and your version was already installed or you upgraded yourself?
Click to expand...
Click to collapse
1) The QTEK does not support Bluetooth, and there is no way to make it work on a QTEK either.
2) There is no Bluetooth option in any of my menus or settings (I would expect this as my device does not support Bluetooth). Windows PPC2003 is supposed to be able to support Bluetooth, however: http://www.microsoft.com/windowsmobile/products/pocketpc/about/2003/bluetooth.mspx
3) I upgraded to the 4.00.05 version of Windows PPC2003 myself using Jeff's ROM Kitchen (thanks Jeff!) http://cuba.calyx.nl/~jsummers/ROMkitchen/
Hi, Once i had 4.00.01 and in connection setting i had Bluetooth option but ofcourse it was not working, the other thing is do you know any camera work with SD port of Qtek? i mean something availble in the market.
4.21 is more stable i think.
cheers,
I had some problems when making calls on my QTEK yesterday. While in a voice conversation audible clicking noises can be heard and after about 1 minute of conversation the quality of the call deteriorates until the other party cannot hear me. I'll try upgrading the radio...
I don't know about the camera support using the SD slot in the QTEK. My first instinct would be to say no, it's not possible, but I can't confirm that...
I bought a Qtek 1010 in Dubai Duty Free the other week. I've since upgraded the ROM using ROMkitchen and am delighted with it. One thing I did notice though is that the speakerphone functionality (claimed in the Qtek handbook) doesn't seem to work. I didn't try it before I upgraded so can someone tell me if it works with the native UAE ROM code, and if so does anyone have any idea how I could get it working again?
David
I own a QTEK in the UAE and here is my share to those asking about OS and Radio updates here:
I upgraded from
ROM version: SER 1.2
Radio version: 3.23.01
To
ROM version: 4.00.10 ENG (T.Mobile Test)
Radio version: 4.21.00 (O2 UK)
Everyting seems to work fine apart from 2 minor issues so far:
Make sure you set your band to 900Europe as the default is 1900North America in phone/tools/options
The signal fades out sometimes but doznt affect the reception
No G signal but GPRS is OK.
GPRS stays connected; have to turn phone off and on to disconnect.
Advice:
Read a lot before you upgrade. This forum has a wealth of information.
Cheers
ridaz

Phone side of my XDA has mind of its own. Please help!!!!

I have problems with the phone side of my XDA.
It keeps turning off by itself every 20 or so minutes.
I have upgraded to
ROM 4.21.00 ENG
Radio 4.21.00
Protocol 32S54
Still no changes. PDA worksfine but phone still turns off by itself.
Any sugestions please.
Thanks
what's your device type ... PW10A or B (rear sticker) ? and what's the band width of your network ?
also, does the phone work fine before turning off ?
did u upgrade the RSU or the ROM only and where/how did u do the upgrade ?
It's PD10A1 originaly on O2
The phone works fine while is on.
I upgraded via ActiveSync
First the ROM and than the RSU
Both upgrades successful
Did the same before the upgrade while using Developers special ROM.
I tried all diferent options in phone setup but no change.
Any Sugestions
this may or may not be help full but when I upgraded my radio stack on the o2 XDA 2 with the I-Mate Radio Stack, OS and Ex Rom it worked fine, however when I changed the Ex Rom with the O2 Ex Rom the phone stopped working.
The work around can be seen in this forum but I cant find it at the moment. Hope this helps?

Blackberry connect for wizad

I have an i-mate K-JAM and need to get the t-mobile blackberry client working to access corporate email. I upgade my ROM to following:-
ROM ver 2.16.9.1 WWE
ROM date 2/6/06
Radio ver 02.07.10
Protocol ver 413.1.03
ExtROM ver 2.16.9.101
Installed Blackberry client and desktop with no problems but client will not connect. I could not install the t-mobile ROm as I has an Invalid Vendor ID message.
Any suggestions how I might get it to work, I have heard that the t-mobile client is incompatible with ROM ver 2.0, but also understand I cannot now load a lower ROM version.
Dude, I hate to bring down the rain on your head but if you look in this forum you will find an extensive thread on BB Connect for the Wizard. I'd suggest reading it - first off it doesn't work with AKU2 ROMs so you're on a hiding to nothing unless you downgrade. Second, the reast is in the thread.
Sorry for being a novis, but we need to start somewhere! According to the I-mate Club website once the ROM has been updated to AKU02 it cannot be reinstalled with older version. Any assistance/clarification very welcome.
shiskinegolf - imate club don't know what they're on about mate. Read the lokiwiz thread on this forum at the beginning and it will tell you how to SIM and CID unlock your unit. I'd also recommend reading the last three pages or so of discussion which takes you through the issues we were having unlocking AKU2 ROMS - there is a trick to it but I understand lokiwiz has been updated to make it work since we were using the get around. Once you have SuperCID unlocked you can install any ROM you like (that includes downgrading to an AKU1).

MDA II - No Service

Hi, i recently got this MDA II from a friend and finally succeeded in updating it to WM5 and ROM Version 1.72xxxxx T-Mobile (can't remember all the Numbers).
It work's perfectly for everything i wanted it for (Navi, etc.), except for phone calls. After entering the PIN it just says: Searching or No Service.
I tried a SIM from T-Mobile Austria (from where the MDA comes), and also one from Hutchinson Austria (3) - Same Prob. I also tried to unlock it with the unlock tool located on this frorum. I got no error but it told me that the phone already seems to be unlocked.
It's not a big deal for me because i never intended to use it as a phone replacement, but somehow it's bothering me a bit.
I don't know if the ROM upgrade from 1.6xxx to 1.72xxx is the Problem. To tell the true i don't even know from where I got this newer ROM. The only thing i know it was not from T-Mobile Austria.
I already found a Version from T-Mobile Austria (RUU16008GER_TMobile), but this Version is very old and I don't know if it's worth the risk of downgrading.
Can someone please give me an advice on what to do?
Thanks in advance
first of all then 1.66 and 1.72 are not wm5 roms at all they are just the last offical roms for these devices and they are wm2003 roms
second then they are roms not radiostacks (radiostacks are the software for the gsm module)
http://www.buzzdev.net/index.php?option=com_remository&Itemid=132&func=select&id=26
list of various radeostacks
personaly i use 1.19
Thank you, as you can see i'm a total newbee to this topic.
Is there somwhere a detailed manual for upgrading the radiostacks?
HimaUpgradeUt.exe
upgrade
rom if nk.nbf is present in the dir
and
radiostack if Radio_.nbf is present in the dir
so if you want to upgrade the radiostack along with the rom
one just make sure both of the files are present in the dir
if one wish to upgrade 1 of the 2 simply remove the other nbf file
same deal with extended rom
Thank you
Ok, i tried the 1.19 Radio Stack together with the Hima_-_Helmi_AKU3.5_ROM_SP2 ROM.
The update progress proceeded fine but i still have the same problem.
edit: Wow after 5 Minutes i've got a connection with A1 (right now i'm trying a Hutschinson SIM witch connects via GPRS automatically to A1)
Ok, i tried Roms Stack 1.19, 1.17 and 1.08.
On some certain locations i get a signal, but in general the signal is very poor.
I'm not shure but maybe the couse of the problem is the phones hardware itself, and not the software?
maybe
dont know about where you live but here i dont have too many issues
but the htc phones i had have in general had a poor signal then nokia and the likes
and poor conversation quality
you could try giving other sim cards a go as some older sims have had issues with htc phones in the past
I just wanted to inform everyone that you where right (again ).
Today i tried a newer Prepaid SIM from A1.
Now i get a full Signal from everywere in my house.

Help with DeviceData file

Hi guys,
I have upgraded succesfully my QTek 9090 BA to WM6 following the wiki, have some issues with WiFi and would like to upgrade my ROM...I guess...I'm new on this PDA world so still confused with terms.
I'm following the Wiki and got stuck here: http://wiki.xda-developers.com/inde...0.ROMx20.thatx20.willx20.workx20.forx20.mex3f.
My Device ID returns only:
P H 2 0 B W W E AT%CID? 5 . 6 0 . 0 0 1.12.00 % 4
So for what I understand:
MOdel PH20B
Lang: WWE (English)
Operator: AT%CID?
Rom Version: 5.60.00
Extended Rom version: 1.12.00
Radio Version: 4
Is this correct?
If so, I don't understand if this: BA_WWE_BP_12200_169_10602_SHIP.exe would be good for me...
Can you please help?
Thanks!
The Devicedata file was need in the old days (WM2003).
Now on WM6 (and WM5) the file does not matter or make much sence.
BA_WWE_BP_12200_169_10602_SHIP.exe
This is a 2003 rom with the rom vesion of 1.22 (making it old even for WM2003 as 1.4 was the last I can remember), the Radio is 1.602 (which is even older than your 1.12 (1.15 is the current one))
Best bet for you is the WM6 rom and up your radio to 1.15 (wiki will tell you how).
Hope that helps
Hi! and really thanks! It confuses me how 1.6 can be older than 1.15...?? Anyway, I updated to Radio rom 1.15, however reading more I found that it has nothing to do with WiFi...
Now, I seems to be understanding more and more about the Roms, extendend roms and radio roms with TypeI and II.
I have been looking at the FTP site and what I still need to understand is what Rom to use...how do you difference those codes? I'm using rar 20226...is this ok? Any newer ROM or more stable?
And what defines the WiFi driver? The ROM itself? I have the problem that my WiFi signal is very poor...
Thanks again
There are a few thiings that are wrong with the BA as it is end of life and if it was not for XDA-Devlopers it would be dead.
Wifi has its issues there is a work around and that has something to do with the way you start it. (to be honest I can't remember what you have to do but search will help)
Bluetooth is the other know issue, if you don't want to make friends then the best way to do this is post a "My Bluetooth does not work thread". That a low post count will get you flammed at big time.
The Type I and type II roms were based on the format of the roms and the tools we used about 3 years ago. Some smart guy worked out you could bypass this whole porcess (the checking of the country code) by using a flash program form some other HTC device.
So by the time WM5 came out then the "on id exe" solved that issue and we have been using it ever since.
The radio you talking about is 1.06, if you want to look at some of the roms we had found and posted on the FTP (unitll M$ got us to close it) then try this link.
http://wiki.xda-developers.com/index.php?pagename=BA_Versions
Extra rom was a carrier based issue (wiki has a whole section on it) however WM5 and WM6 did not use the same system so the space was reused for the rom (is one of the steps in the upgrade process).
As for the best rom, this is up to you.
Xplode used be active and now its Sun_dream.
Both of these guys know there stuff and have my Full respect.
Have fun

Categories

Resources