I have a US T-Mobile phone that I mistakenly upgraded the radio to the O2 4.21 UK version.
I SD flashed the OS ROM back to T-Mobile's version 3.14, but it cannot change the radio version back. It's giving the "Pocket PC Upgrade Failed" message at 1%.
I've read about copying the 4 files to the /windows directory, but this doesn't seem to work because if the 4.21 version.
Please help
Related
I upgraded my xda using the sd-card method. It worked for a few days, but then i was not able to connect to my pc. I downgraded to irish o2 3.14.13eng via sd-method. radio version is still 4.21. Now the phone is not functioning at all. It says "no signal". How can i go back to my old 4.16 version and keep the 3.14.13 rom?
BTW: i tried to downgrade to 4.16 via the exe. filef rom irish o2 site, but i get the message "flash failed". HELP
I tried to upgrade radio stack with newest version for AT&T wireless and now XDA is booting but without GSM. I can connect via ActiveSync and flash OS to any version but any version of radio stack upgrade failing.
I do all radio stack upgrades via copying 4 files to Windows folder. Is there any way to use SD flash method for radio stack upgrades?
I have upgraded to WM2003SE ROM, and upgraded Radio ROM to A20.10. My device is PH10A. But when I insert a sim card, these always no GSM, I could not dial any phone call.
Could anyone tell me that I should flash which Radio ROM to my device? Thanks
problem connecting to any network after radio upgrade
Hi,
I am having the same problem connecting to any cell network on my phone. It is a Qtek 1020 PW10A1 Rom version 4.02.04 ENG.
The problem started after updating the Radio stack software. The signal icon always shows up as no signal, this happens on all networks. I have another 1020 with the same Rom version but a different radio version A33.02 that is working. I have tried to search for this version to download or a solution for this problem for a few days now with no luck and was wondering if any one could help?
I have come across many other radio versions that say they are compatible with this model but each produce the same result, no signal.
Thanks in advance
(PS this is my first post!)
Hi Shadow,
I also have a 1020 with RSU 33.02 installed. If I knew how to extract the RSU then I could upload it here. It could do with being on the FTP. I didn't find anything on the Wiki about it, wondering if anyone has any suggestions?
Regards,
Neil.
I’m new to this so this may be wrong but I have found out that if I go into the wallaby boot loader and push the contacts button I get these options:
CE ROM TO SD
BOOT TO SD
GSM ROM TO SD
CE+GSM TO SD
Is the “GSM ROM TO SD” option the one that’s needed to be able to get the RSU extracted or is this something completely different?
When I select it, it tells me to connect the rs232 and run pc monitor – two things I don’t have.
Shadow1
Anyone found RSU 33.02 rom yet? or have any sugestions on how i could fix my phone :?:
Thanks
I recently unlocked my wallaby xda, but now i have no signal no network at all, i tried upgrading my radio version to 6.25.02 but it didnt work, i then tried to put my old radio version but i cant find the exact one i had which was 4.21.05 i only managed to get a 4.16... which will not load completely, it only gets to 1% then its says failed to flash rom....... i cant complete the installation and i cant find my original radio version.
PLEEEEEEASE HEEEEELP, NO SIGNAL...........
I have Qtek 2020 with Rom CE Version 1.72WWE, but every time i try to upgrade to new roms:
(Previously Sundream's WM 6.5 WWE) and (Currently Syed Ather's WM 6.0)
Its giving me issues related to my network.
Signals are fluctuating, i cant make calls, neither recieve them, get messages in delay time more often, It avoids making me save contacts in sim card but after several attempts it succeeds.
Please Help me out. I am not getting this issue when i downgrade back to my Official Qtek 2020 1.72 Rom.
That is strange. Can you tell me, when you take your battery out, what is displayed on the sticker underneath? PH10a? PH10b?
Also, do you happen to know what Radio you are using? (The radio is seperate to the ROM).
Furthermore, and only if you remember, when you put your device into upgrade mode just before you flash a new ROM, what boot number does it say (IE Mine says V1.04 from memory).
Thanks for Reply
Jadel said:
That is strange. Can you tell me, when you take your battery out, what is displayed on the sticker underneath? PH10a? PH10b?
Also, do you happen to know what Radio you are using? (The radio is seperate to the ROM).
Furthermore, and only if you remember, when you put your device into upgrade mode just before you flash a new ROM, what boot number does it say (IE Mine says V1.04 from memory).
Click to expand...
Click to collapse
Yeah let me tell you all the necessary Information
Official Qtek 2020 Rom Version: 1.72.00
Official Qtek 2020 Radio Version: 1.14.00
Upgraded to:
Syed Ather's WM 6.0 Profession (Currently)
Radio Version: 1.17.00
-------------------------------------
It is : PH10B
Bootloader Version : V1.04
My Network Details
Network Name: Ufone
Network Country: Pakistan (ASIA)
Details of How I Flashed My Roms
I went to Boot Loader First: (DPad+Power+Reset) (V1.04)
Attached it to my Laptop through its Cradle (Windows XP Used)
Serial changed to USB
Loaded HimaupgradeUT_NoID.exe file (dont remember exact Name)
and Upgrade the roms + Radio Later
Got Congratulation Screens
Hard Reset By (Camera+Record Button+Reset)
Using the NO,YES,YES things and Pressing DPAD
Important Thing to tell you
1-I didnt take out my Storage Card not even SIM Card of My Network Provider when Flashing both times the different roms.
Please Any one here to help me out