Database Users

XDA ROM upgrade what's happened??

Hi all,
Big issues!! I upgraded my ROM to 4.20.?? and all appeared to be working fine but now when I press the on/off button the XDA turns off and I can't turn it back on except if I soft reset.
Also, I can't see to upgrade or downgrade the ROM. An error comes up saying the connection had been inaccessible.
Is there an easy way to downgrade the ROM. This problem all came about because the sound on my XDA kept dropping in and out!! Now there's no sound and a few OTHER issues!!
Any help would b greatly appreciated.... anything at all!!

Have you installed a "clean" ROM or with included applications?
Very often KSE Truefax causes this issue....
Stefan

What do you mean by 'clean ROM'?? As far as I'm a aware there weren't any extra applications (I did not cook the ROM in the kitchen if that's what you mean??)
I downloaded it from the FTP here & loaded it through the USB cradle.
Any ideas??

Ok. So you have a "clean ROM" when it is directly from the ftp.....
In the beginning it worked for you?
Have you installed any appliacations on it?
Stefan

Haven't installed any additional applications... the OS works fine... it's just that there's no sound and when I press the on/off it turns off altogether and I have to soft reset.

So no ideas then I take it?? :shock: :?: :?:

Stuck at Start up Screen

I upgraded my SX66 to WM6 and it worked fine for about 6 weeks, then it froze so I reset it and now it hangs up on the Windows Mobile Splash screen. I've tried hard resets, reflashing the ROM, and reflashing the radio stack but nothing helps. The versions I have currently loaded are R - 1.15.00
G-1337.45 and D- 5.60.00. I also tried reflashing with xplode's version 6 but then it hangs on the 4 striped screen. If anyone has any ideas please help, I'm lost without it.

hello,
try reading my thread
http://forum.xda-developers.com/showthread.php?t=352399
i was stuck there too and i did a hard reset.
remember to change the 2 options and push the mail button!
best of luck
jason

IT WORKS!!!
Thank you, thank you, thank you. I had tried that but didn't know I was supposed to push the mail button to save it. My PDA is no longer a brick! Thanks again.

Help Please

Hi have a slight issue with my Mini s, i believe its the wizard. When i go to send txt messages it tells me the phone is not ready and i have to wait 15 seconds, so i cant send msgs, i can still ring in and out, also when i try to go to phone settings it tells me to wait 15 seconds and try again, when i go to sim manager it tells me to again, wait! I believe at the moment it is flashed to 02 with an orange sim in it, its the G4? version. Its running wm5 i think, if i could have it flashed to orange on wm6 that would be great.
Any help on how i can overcome this problem would be great. Thanks
Matt

Perform Soft Reset first,check if it solves the problem, or Hard Reset,but remember you'l llose all your personal data by doing hard reset,but it might solve the problem.If nothing works,than its corruption of the extended_rom,you might have to reflash a rom.
To upgrade to wm6 read the guide posted here at xda-wiki ,be careful,if you say its a G4 device,its a bit sensitive device:-
http://wiki.xda-developers.com/index.php?pagename=Wizard Windows Mobile 6 for newbies

rite ok ive already tried a soft reset but it didnt work, sorry i havent got a manual for the phone so how do i do the hard reset? also if so how do i reflash the rom, any guidance would greatly be appreciative.
Thanks

Hard Reset
Hardreset for Wizard is by pressing: Comm button + Voice command button and slightly push the softreset button with stylus.
Guide to flash a rom is posted in my above post.

you should reflash your rom I also has same issue and reflashing solved the problem.

no service... R:none G:none

OK heres my situation:
i upgraded from the stock o2 wm2003 to wm6 using the wiki ROM:
Helmi Windows Mobile 6 Profesional R0
CE OS 5.2.1620 (Build 18125.0.4.2)
now on bootup it says
R:none
G:none
D:5.60.00 WE
It boots up fine but....
i cant get any reception.- just says "no service"
i have also tried disabling and re-enabling "Phone" in com manager
Yes, i have done a soft reset, hard reset and ive tried XPLODE wm6.5 and my current wm6 ROM.
XDA unlock all reported a successful unlock.
HELP!!!
OK, i did the thing in the ROM post said:
"R None if you take out battery and turn it on without push the reset button twice.
SDK?"
and it works now but when i turn it on i have to press the reset button twice every time
can someone help?

first of all you must unlock sim under WM 2003, then remove the extrom of 2003 to gain adidional 16 mb of storage (resize DOC), then you must upgrade to radio version 1.15 and then you must try any WM5, 6, 6.1, 6.5 rom
so now flash your shipped rom, you may find preferred rom for your operator in my signature, then start everything from the beginning

ok, it has kinda settled down now, working as normal.
I have "unlock sim under WM 2003, then remove the extrom of 2003 to gain adidional 16 mb of storage (resize DOC)"
If i wanted to upgrade my radio version would i have to flash the ROM again?

no you can flash radio rom only without the OS

Jejeje
Hey Xplode i never was able to see that tools like unlock extrom and repart DOC works on my BA... it always shows an error! when i execute the unhide hide repart etc etc.. so I upgrade even tought jajaja.

they only work on WM 2003

xplode said:
they only work on WM 2003
Click to expand...
Click to collapse
are you sure xplode, cause i unlock my phone using the tools from the BA wiki and im using wm6.5.

ok,
i upgraded my radio to 1.15.....
but i still got the problem

none
I get this on my wm6.1 but normally gets sorted after a soft reset
HMM!!!!

Same problem, after updating from stock WM2003 to WM6.1PRO all steps done like the wiki steps except the ExtRom step, couldnt get the unhide, unlock program to run (missing file or libraries error), so i flashed sun's WM6.1PRO without the extra storage, now when i change the battery i get the NO radio bootloader, still im able to fix it by doing a soft reset, but the strangest thing is that im not able to use the wifi :/. So the thing is, when i turn on without the radio i can use the wifi, but no the phone(airplane mode), and when i do a soft reset, the radio shows and i can use the phone but the wifi doesnt turn on at all!. Any help please, dont make me choose betwen my phone and my wifi
PD: is not only the radio missing the i change the battery, also R:none G:none
I have a Qtek9090

very odd ,i can use my wifi when the phone is on.
But i went from wm2003 to wm6.5 to wm6
wierd....

so, is there a solution? I've got the same problem

Ops! Solved. Do a soft reset via the button.
(I always do a softreset via unlocking the battery and locking it again)

Every one here should know that there is no WM 6 for BlueAngel by microsoft. it is ported on BA by helmi_c and that >> R none and G none << Bug is in WM 6 from very first day. SO Whenever u pull the battery out u need to SOFT Reset the device after putting the battery on phone.(u need to wait to start the phone to reset, just put the battery and insert the stylus at reset point.)

there is no point discussing about this anymore. thread should be closed.

i have the solution about this problem, im recovery from it.
first of all, downgrade ur ba tu ship rom, and go back to upgrade 6,5 rom, after finis doit "WM5" hardreset.... search the way in wiki.
wala........its done and run normal r;none g;none not see again. have try it

This is an old problem... Rnone Gnone
solved by sticking your soft reset button after changing battery or a hard reset.
The Wifi-Phone problem is solved by buying a new battery. The Wifi module wont fireup because of the lack in power draw since the phone is using much of it.
Buying a new battery solves plenty of problem. even OS speedup because it solves the lag the "modules" (e.g camera/lan/phone/mmc) detection gives while in bootup or execution.
If you still have problems. We can always point to the wiki.
Have a nice day!
-SS-

Need help please

Hi guys,
I need your help regarding an issue with my HD2.
I have a pre-release unit and I tried installing the SMS update from HTC website, but now it won't get out of the bootloader screen, I've tried to install other official ROM's but with no success. The device has SPL 0.67 and it seems that that is cause why I cannot install normal ROM's.
Do you guys know a way to go around that ?
BTW I've tried SSPL and HSPL and they don't work.
Thank you

Have you tried to see if your provider or HTC for your area has an upgraded rom for your device. That may possibly upgrade your spl to at least 1.42?
If no luck there, have you tried doing a hard reset to see if that reverts you to your original rom?

i've already talked to the guys or girls from HTC customer support but they said that the SN and IMEI of the device do not register in their database as an HTC device so they cannot help me.
regarding the hard reset i've tried it many times but no succes.
the solution as i see it so far would be a designated ROM for that tipe of device (pre-sale unit) or some tool to change the SPL of the device.

Have you tried the hard reset to see if you can get back to the original rom so that you have some functionality and not just a paperweight?

yes i did but nothing happend

Sorry to check up, but you won't be the first to have gotten it wrong - you do know the difference between a HARD reset and a SOFT reset?
Hard reset = power off, hold in both UP and Down volume buttons and while holding them in power up the device. Then press volume up and volume up again.

that's what i did

I've heard that there some apps out there that can modify the SPL version. Does anyone have any idea where I can find such an app ?

Contact me, mayb I can help you out!