Database Users

Unabke to power device after failed ROM upgrade!

Help!!!
I have been using a WWE WM6 ROM for a few weeks now, after having got out of trouble using the German O2 Orbit ROM. Since then been running WWE WM6 ROM and loaded a few extra HTC Apps - all fine!
Yesterday, tried installing a different ROM, now the device will not power on. USB or mains - nothing. No lights, no life :-(
Have I "bricked" the device, or does someone know how to resolve this?
Help!!!

It may still OK. It just cannot wake the OS up. Try to enter bootloader by pressing power + voice recorder + soft reset simultaneously, then flash with original ROM

Tried this - used this before...
The device just seems like it has no power...
No power, no way to reset - I have tried the "Voice" + "Power" + "Reset" combinations. I am familiar with getting into the Bootloader screen...
Unless anyone has a better idea, I'll have to go to the manufacturer and get it repaired I guess...

original ROM
Hi, where can I find the original ROM image of Dopod P800W?
I tried to sign up their web site but not worked.
Thank you very much for your help!

power button not working properly

I updated my rom to the 3.14 for the gps. after that I was stuck in the bootloader screen, downgraded rom to the one from htc website (2.17).
now phone works fine except when I press the power button to turn the display off you should be able to just press it again to turn it back on.Instead my green status light stays lit for like 2 seconds and then starts blinking like normal but the screen never turns on. Must remove battery and phone reboots fine just cant touch the power button same thing keeps happening. Any help or ideas on this?

Have you tried a hard reset?

yes it has me press r to confirm then after it says to reset press spacebar to boot, and still same problem.

i've even tried installing the 2.17 rom update a few times but nothing seems to help, I even thought about calling sprint to see if they could help. I'm currently running the latest rom from htc so i dont think they could say its my fault and them not fix it

irdeath said:
I updated my rom to the 3.14 for the gps. after that I was stuck in the bootloader screen, downgraded rom to the one from htc website (2.17).
now phone works fine except when I press the power button to turn the display off you should be able to just press it again to turn it back on.Instead my green status light stays lit for like 2 seconds and then starts blinking like normal but the screen never turns on. Must remove battery and phone reboots fine just cant touch the power button same thing keeps happening. Any help or ideas on this?
Click to expand...
Click to collapse
Having this exact problem with the 2.17 ROM. It's linked FROM Sprint's site so I'm sure it's an official release.
Let me know if you find out anything and I'll do the same.

I had the same problem. I tried to re-flash to an older hard-spl (I think it was olipro 1.10) and everything seemed to work again.

I'm having this same problem as well...

This is a symptom caused by running the level 1.x unlocker with the level 3.x ROM, or the level 2.x unlocker with the level 2.x ROM.
Flashing the proper bootloader (unlocker) should fix your problem. Level 1.x bootloader with level 2.x ROM and level 2.x bootloader with level 3.x ROM.

BA is dead!

Hey...
I've tried to upgrade my Xda III as explained here:
http://forum.xda-developers.com/showthread.php?t=372485
Everything seemed to be fine, but Step 3 hung at 50%.
I waited 2 hours... nothing... 50%.
So I removed my Xda III from the cradle...
Upgrade gave me an error message "Device removed, please repeat all...".
But now the Xda III seems to be dead. Nothing works.
I could nee some help...

it happens with me two times at 94 and 86%.
i did this to recover ba again.
1) change the cradle port (any other usb port accept front)
2) after fails on vista than i switched to xp.

But I cannot turn on my Xda.
Nothing happens when I push any button.

After removing SD, Xda III turns on.
This time flashing was successfull.
After Hard Reset, first time, Developer Menu doesn't appear.
Upgrading Radio fixed this, too.
Just for information.

how to upgrade the Radio ROM please guide on this!!!!!!

http://wiki.xda-developers.com/index.php?pagename=BA_Radio_1.15_Upgrade

It's easy.
Just download the last radio from ftp://ftp.xda-developers.com/BlueAngel/Radio_Roms/
It used "BA Radio 115 THIS WORKS.rar".
Then put you BlueAngel in bootloader mode (Press and hold the "Power" & "Record" buttons, and then press the reset button until 'Serial' is showing on the screen).
Connect it to your PC and run MaUpgradeUt_noID.exe
That's it.

thanks a ton bro.......for your support................but the link is not working

HTC hangs in bootloader after attempt to flash rom

Hi!
I have a HTC P3300.
I bought a 4Gb SDHC card, and it won't work. I read at the forum that I would need a different rom, so I downloaded "Artemis_Touch_4.02_Full_with_no_cube", which would have sdhc-support.
Then I executed "STEP 1 - activesync then uspl cid unlocking.bat", that finished ok, and then "STEP 2 - activesync then flash artemis touch rom.bat", which stopped with an error 302.
After a restart all that came up was the boot loader. I then tried to flash the original rom (HTC WM6 Dutch) from the computer, but that ended also in an error.
I tried the SD upgrade (rename .nbh file to ARTEIMG.nbh, put it on a formatted sd-card and load it in my phone), and it finished without errors, saying I should press any key.
After pressing a key, the bootloader popped up again.... :S
Can anyone help me? I have been searching the forum and trying to get my phone to work since 21:00 and I haven't got any progress at all!

well sorry for that
did you tried to make hard reset?
and once i had a completely dead artemis.. no sign of life..but it fixed by the following..(and maybe this may help you cuz the flasheng goes not like usual)
while your mobile is off.. press the record botton and the camera and it should starts with usual sd card flashing.
for me this what happens.
the setup was in three phases as i saw... and it took about 30 mins .
maybe it will works for you

I also tried a hard reset, wouldn't work.
I pressed and hold the camerabutton, but nothing happend...
Maybe the battery is empty, so I pressed and hold the camera button while plugging in the usb-cable.
It started the SD-upgrade, and is still busy.

The update ended with a "press any key to continue".
But when I pressed a key, the boot loader popped up :S
When I tried to flash another rom (NLD-FINAL), an error occurred (I believe it was error 270, not sure).
But then the normal startup screen appeared!
I don't know how, but the problem seems to be fixed!

sorry i mentioned the wronge button before..
try to start flashing by pressing the RECORED button and the power.. while your mobile is off.
and be sure that you copied the original shipped ROM to your device (NOT elese)

As you can see in my previous post, I managed to flash the original rom.
I'm gonna try to upload an other rom some other time...
And with a patch I got the SDHC working too!
Thnx for your help!

y_bother said:
sorry i mentioned the wronge button before..
try to start flashing by pressing the RECORED button and the power.. while your mobile is off.
and be sure that you copied the original shipped ROM to your device (NOT elese)
Click to expand...
Click to collapse
Hey, thanks a lot, I tought, my HTC-Cruise is ready for sending to repair, but with your info, it works again. I could install the WM 6.1 again, after System hangs up while booting every time. He found USB connection on a colored sreen. Thank you very much.
Jupeli

Help Please

Hi everyone in a panic but am trying to stay calm lol...
So i think i have over tinkered and broken my phone....
I am able to get to the boot loader by powering on and holding down the volume button and it will allow me to flash radio and rom to it but it never boots after just hangs and says loading please wait..
I have tried roms
chuckyrom 23148 tabtasitc
OzDroid 2.00
and radio's
2-11-50-26
2-11-50-26
and the same thing with these in any combo
I have ran task 29.. and have to admit i am left a bit worried now... any advice would be great i am going to read the rom section and try and get a new rom and radio combo...
Any Ideas ...

Okay phone seems to be flashing... but task 29 is not seeming to wipe my phone correctly it is still left with the chucky room splash screen after a task 29 i thought this should go white

First thing, your phone is fine - since you can get into bootloader mode.
What version of the HD2 do you have - is it the T-Mobile USA version?
Have you installed HSPL on your phone?
Go to the HTC website for your location and download the ROM for your phone (if your phone is unbranded then download the HTC ROM or if it is branded then download the mobile operator's branded version of the ROM). NOTE: If you are using a TMOUS phone, then double make sure that you are downloading the USA version of the T-Mobile ROM.
Bootup your phone into Bootloader Mode, then connect to your computer via the USB cable. Run the downloaded ROM. Ignore the connected via activesync in the warnings.

Hi i have a O2 uk hd 2 i thought the phone was okay as the laod was coming up and it seems to be writing to it... hm strange it just says loading but the red writing does not appear on the bottom left to say rom and radio version...

Hi have downloaded and flashed the o2 rom from the HTC website it seems to have gone okay BUT now when it boots it is just stuck on the O2 splash screen and goes no further..
I have now removed this from usb and re inserted the sim card and am getting this at the bottom
R 2.07.51.22...2 (Is this the radio?? or the Rom)
g15.32.50.07u
d 1.72.82124
and it has come up slowly and seemed to be loading windows mobile.. and then crashes and starts all over again...

Okay so I have now got a stock o2 rom from htc on my phone. and it is working.
Thank you Fred_up for the advice... should i now be able to start again trying to load a custom rom back on to the device to enable me to use android again?

Try doing a hard reset. While phone is Off, hold Volume up & Volume down buttons, then tap the Power button.
In Bootloader Mode, what does it say?

pull off battery and wait 5 minutes. let the phone cool and the insert back the battery.
it should be alright. however everytime your phone overheating its freeze again..
any solution to that let me know.

cool off your phone. take out the baterry and then once the phone is cool insert the battery and it will boot again.
now hd2 have this problem. overheating. the phone will freeze. hd2 now need freezer to make it not freeze.