I have a QTEK 1010 (from french operator Bouygues Telecom) with original 3.15.06 ROM and T313 Radio.
I would like to test SIM TOOLKIT but it's not available with this ROM version (and I don't want to upgrade because it's not my own PDA).
I know that a SIM TOOLKIT application exists on newer ROMs (like QTEK 3.16.52).
Is somebody (with a new ROM) could send me the SIM TOOLKIT application to test it with my QTEK.
I would like to test the WMODEM application too if possible.
Thanks
Related
Hi,
I've managed to upgrade my MDA I with the new T-Mobile 2003 ROM Version: 4.01.16 ENG, Radio Version: 6.25.02
Any idea how I now unlock the thing so that I don't need to use a T-Mobile SIM?
I know I could install a different version of 2003, but I actually do want to use the T-Mobile one.
Cheers
Paul.
UPDATE: I now think that my problem is not that I have a sim lock, as it is not telling me that my O2 sim is not supported in this T-Mobile device. I think this may be an issue with the radio version. I have tried going back to my old 2002 install and also the XDA developers special. But no matter which one I install I always have the new radio version of 6.25. Does any one know how to "downgrade" my radio to an older one?
Hello,
I know that I should'nt have do that, but I need your help.
I upgrade my MDA on the following state :
Rom : 4.01.16 Eng
RSU : 4.21.00
For buisness reson I have to go back to the original state.
Rom : 3.18.01 ENG
RSU : 3.23.00
Unfortunatly I didn't do a Backup
I have acces to some MDA with the originale rom and rsu
My question is how to go back to the originale state, without destroying the other mda with the originale rom? via bootloader?
Thanks in advance
The ROM part is easy, you can get the original 3.18 ENG from the carrier devices site http://www.carrierdevices.com.au/downloads.php?region=Asia Pacific
The RSU might be your nightmare especially that you have 4.21 which showed to be the pain for most people here ... anyway, in the same site you will find RSU 3.25 for Qtek ... it's almost the same as 3.23.
Good luck
Biso007 Thanks for you answer,
I look at your link but it seems to be the Qteck version, I really need the officiale t-mobile version.
Is there any way to save the originale one in one of the other phone that I have access and restore to my one?
Biso: Is the rom found in http://www.carrierdevices.com.au/downloads.php?region=Asia Pacific WM2003? What radio version it contain? Is it compatible with PW10B1 device?
I'm now running T-Mobile ROM 4.01.16 ENG, Radio 6.25.02. I'm plannning to change the Radio to be compatible with Asia-Pacific and in the US (I've been going to Asia and back to the States for business, so I want a device compatible with both Asia-Pacific and US). Thanks
ok I Download the old version on a new phone via OSimagetool to my sd card and put it on my device. working perfectly.
So now I just have to downgrade the radio stack to 3.23.00, where I can find it and how to downgrade?
I download the file here
http://www.t-mobile.at/business/mobiles_arbeiten/MDA/SWupdates/
Looks like it's working, (at least I have the right number at startup)
the only problems that I had it's that rhe rsupgrade was lauch every time I startup, I had to delete the file rsupgrade on startup folder. now it's working like before.
Thanks a lot.
By the way, does it exist a solution in mda to copy contact name to the sim card?
pjfuerte said:
Biso: Is the rom found in http://www.carrierdevices.com.au/downloads.php?region=Asia Pacific WM2003? What radio version it contain? Is it compatible with PW10B1 device?
I'm now running T-Mobile ROM 4.01.16 ENG, Radio 6.25.02. I'm plannning to change the Radio to be compatible with Asia-Pacific and in the US (I've been going to Asia and back to the States for business, so I want a device compatible with both Asia-Pacific and US). Thanks
Click to expand...
Click to collapse
No, it's PPC2002 and the RSU is 3.25 for PW10A devices (900/1800). I know it coz it was on my device before I replace the mother board with a B-type one.
If you are going to use 900 MHs network in Asia you can keep your current RSU ... I have it on my device and my network is 900/1800 ... other than this you better use 2 phones or get a new XDA II
sebs said:
By the way, does it exist a solution in mda to copy contact name to the sim card?
Click to expand...
Click to collapse
Dealing with the SIM book is a matter of s/w and the device type (XDA or MDA or ... ) has nothing to do with it. You can find many freeware s/w to deal with the SIM entries.
ok thanks a lot, do you just have the name of one of this freeware?
try this http://www.pocketgear.com/software_detail.asp?id=7496
don't work for me
Requirements: Pocket PC 2002("Not Microsoft Phone Edition or Pocket PC 2000)
Click to expand...
Click to collapse
always looking for gsm phone.
Say choose flexport extra if you have running voice gsm installed on this device, but i dont have the option.
Sorri for bad english.. i`m Russan.
I have T-Mobile MDA 1 32mb. PPC2002
Have ROM (on kitchen) 4.01.16
Radio 310.
I see "Settings" - "Phone" - "Band" GSM 900 (Europe) and GSM 1900 (North America).
My GSM operator work 900|1800. How to switch it?
The second question. It is impossible to establish 2003SE.
.exe not working. Error USB connect. How?
xda2's which the imate is support 900/1800/1900
xda1 comes in 2 versions one which is 900/1800 for eu
and one which is 900/1900 for us
there is no way i know of to change an xda1
I've to correct Rudgear a bit....
ROM 4.01.16 sets in most cases the band to 900/1900. If you got a PW10A modell (check rear side of your device) you have to set it back to 900/1800 via Bootloader
Instructiony could be found here:
http://wiki.xda-developers.com/index.php?pagename=ChangingBandsWithBootloader
Pay Attention: Entering Bootloader is just like doing a hard reset, so don't forget to backup your data.....
Concernig your problem about Upgrade to WM2003SE. A mentiond 1000 times here in the forum, this causes from the t-mobile ROM installed on your device. You have to downgrade the ROM first to a "normal" ROM (like the special edition ROM) via SD-Card, and then you can upgrade via exe file to WM2003SE
Stefan
LumpiStefan said:
Concernig your problem about Upgrade to WM2003SE. A mentiond 1000 times here in the forum, this causes from the t-mobile ROM installed on your device. You have to downgrade the ROM first to a "normal" ROM (like the special edition ROM) via SD-Card, and then you can upgrade via exe file to WM2003SE
Stefan
Click to expand...
Click to collapse
Sorry, i read this. I downgrade to spetial edition ROM. I run rom.exe (2003se kitchen) and view window:
Adapt ROM
Error connecting to XDA.
(Active Sync worked)
Has anyone managed to sim unlock the orange m600 unit
I have tried the lokiwiz from another thread but it didnt work.
rom version is 2.10.1.22 wwe
radio 02.07.20
extended rom 2.10.1.107
operator version 13.10.1.107
thanks
When you do manage it, do share the ROM!
willing to hep
IF anyone is working on this i would be willing to help
Me too ....
I can't unlock my phone to use my two SIMCards
HELP me ...
Please
(It's ORANGE FRENCH SPV M600 !)
Lockiwiz can only unlock your Prophet device if your Rom version is 1.XX.XXX. For the new AKU2 ones there is no solution yet.
:?
We just have to wait for an updated version of LOckiwiz or aWizard tools.
Ok, had a modicome of sucess with this, converted it to a Imate Jamin and then used the wizard unlocker to sim unlock it. Its works fine for voice but have not got the gprs to work yet. Although i am using a dual sim and this may be the problem.
will let you know as things progress
Has anyone tried the Imei check site (http://www.imei-check.co.uk/m600unlock.php) I know you have to pay for this, but that is still better than having your phone locked to orange (nothing against orange, just that I have an o2 contract...)
IMEI Check
Works ok unlocked mine there yesterday took less than 5 mins
Ok, thanks, i will stand a new version
Right, let me get this straight...
"Lockiwiz can only unlock your Prophet device if your Rom version is 1.XX.XXX. For the new AKU2 ROMS (i.e Orange M600 ROM) there is no solution yet."
If this is the case, then can we use A-Wizard or the hacked romupdateutility to FLASH back to a pre-AKU2 ROM and then use Lokiwiz to unlock the device, and then flash back to a 'latest AKU2 ROM' (Dopod one is latest and greatest atm) and continue to have a SIM UNLOCKED device???
Please can someone try this? I get my M600 in a week and need to be able to unlock it. Am in the USA atm and need to use a T-Mobile SIM in it.
Appreciate any help.
No lokiwiz can unlock the newer version, i have one and its done it fine, the problem is to achieve this i had to convert the unit from orange to either a dopod or an imate jamin.
Once flashed with the new rom lokiwiz quit happily unlocked the sim.
The only problem i have is i managed to disable the gprs connection detection. I think its something to do with the radio update and not quite getting the conversion right. I have been following the instructions from this and other sites and might have made a mistake.
Hopoing t sort this when i get time
I don't understand ???
You can UNLOCK or not ?
You want my ROM for check it and understand why it doesn't work ?
popeyesfx said:
No lokiwiz can unlock the newer version, i have one and its done it fine, the problem is to achieve this i had to convert the unit from orange to either a dopod or an imate jamin.
Once flashed with the new rom lokiwiz quit happily unlocked the sim.
Click to expand...
Click to collapse
thanks popeyesfx, but which ROM version did you flash to and how did you do it? Was it the new AKU2 Dopod rom specifically?
Did you have to use A-Wizard first to change CID or did you use the hacked romupdateutility to flash the rom from Orange to Dopod/I-mate?
Thanks
I used the modified update util of the ftp site and then used the latest jamin rom from the ftp site, this updated fine and i didnt get any operator errors.
I then used lokiwiz and it unlocked the sim fine.
just as an aside, the problem with the gprs turned out to be a thing with the orange unit itself. I tried a non flashed on and it has the same problem (doesnt show the connection but will connect to it fine when triggered by other software)
there is another link on here that gives you a full discription on how to convert the unit just cant remember it (old age im afraid lol) :lol:
Which ROM to install on an Orange SPV M600?
Just got a new Orange M600, herebelow is the device info;
ROM version: 2.10.1.22 WWE
Rom Date: 2/16/06
Radio Version: 02.07.20
Protocol Version: 413.1.03
ExtROM version: 2.10.1.107
Operator Version: 13.10.1.107
IPL 2.10.0001
SPL 2.10.0001
I used machinagod lokiwiz 0.3 to SIM unlock my SPV M600.
Now;
1) Will my phone be SIM Locked again if i did a Hard Reset?
2) Which ROM is the latest and best and can i install it on IPL/SPL 2.10.0001? If yes, then how?
merci pour l'astuce
Free Unlock Tested Prophet Spv M600 Pm300 From Amena
HI...
It's simple and the process is free ...
Only thing you need is the program Lokiwiz03a and no more. . .
1. Copies Cert_SPCS.cab, EnableRapi.cab to spv
2. install in the spv; 1. Cert_SPCS.cab, 2. EnableRapi.cab in order. . .
3. running the LokiwizMsl.bat which give you the code which you enter with not accepted simcard. . . enjoy. . .
work on all version and all spl . . . tested on ipl 2.15.0001 spl 2.15.0001 g4 chip . . .
Big thanks Juliocesarmaster ! Worked 1000% !
Juliocesarmaster that worked a treat thanks
hy, i have an vpa 4 (vodafone germany)
rom 1.20 (tmobile germany)
radio 1.11 (i have found it anywhere)
extrom 1.30 wwe (from xda-ftp)
i want to update to 1.20, but not this from tmobile. i have tried rom-version 1.30 from qtek, but there i cant make any changes in the registry without having trouble after that (the same changes like under 1.13), i cant save anything in the extended rom, the datas will be destroyed (dont understand it). under 1.13 i have used my ext_rom for own datas and progs.
my question: is tmobile the only one with an 1.20 rom? i dont like the tmobile splashscreen (i have an universal from vodafone). on the phonepad also is the tmobile-logo
my english is not so good, hope anyone understand that what ive wrote.