Database Users

o2 UK gprs settings

Just installed the xda-developrs SE ROM
Seems to make the XDA run like a deamon, well impressed so far.
Just as everybody else though. The autoconfiguration doesn't work. So can't get the o2 wap settings up.
dns 193.113.200.200
and 193.113.200.201
np mobile.o2.co.uk
but something seems to be missing. Could somebody please supply the complete settings.

WAP...
Ehm, as far as WAP goes...
We did not include the EZWAP program in our install. So WAP is unlikely to work. WAP wasn't in Othman's Qtek ROM (it has no autoconfig settings and no WAP), and we didn't create mkrom to take input from multiple ROMs. We figured serious users would want to the new EZWAP which also does MMS (which isn't included by O2), and we never really used WAP or MMS ourselves. So I guess we never tested any WAP settings...
If you want you can have a look at the registry settings we insert for each provider in the 'provider' directory of the mkrom kit. If you think some settings are missing, you could do a registry dump (using the 'System Snapshot' we put in the ROM) before and after fixing the problem, and send us the differences. We can them insert them in next versions of the Special Edition ROM.

02 internet settings
Is this what you want?
Name: 02 Mobile Web
Select a Modem: Cellular Line (GPRS)
Baud rate: 19200
Advanced:
TCP/IP:
Use Server- Assinged IP Address
Name servers:
Use specific server address
DNS: 192.113.200.200
ALt. DNS: 192.113.200.201
WNS: 0.0.0.0
ALt. WNS: 0.0.0.0
Access point name:
MOBILE.02.CO.UK
Name 02 MOBILE WEB GSM
Select a modem: Cellular line
Baud rate: 19200
Advanced:
Connection perferences:
Port Settings:
Data bits: 8
Parity: NONE
Stop bits: 1
Flow Control: Hardware
TCP/IP:
Use server-assigned IP Address
X Use software compression
X Use IP header Compression
Name servers:
Use specific server address
DNS: 192.113.200.200
ALt. DNS: 192.113.200.201
WNS: 0.0.0.0
ALt. WNS: 0.0.0.0
Country code: 44
Area number: 771
Phone number: 2932932
Name : 02 WAP GPRS
Select a modem: Cellular Line (GPRS)
Baud rate: 19200
Advanced:
TCP/IP:
Use Server- Assinged IP Address
Name Servers:
Use server-assigned address
Access point: wap.02.co.uk
name: 02 WAP GSM (CSD)
Select a modem: Cellular Lime
Baud rate: 19200
Port Settings:
Data bits: 8
Parity: NONE
Stop bits: 1
Flow Control: Hardware
TCP/IP:
Use server-assigned IP Address
X Use software compression
X Use IP header Compression
Name servers:
Use server-assinged addresses
Country code: 44
Area number: 771
Phone number: 2927927
There ones I use my self
UK 02 XDA

Hi,
Thanks for the above info. It worked a treat. However I was asked for a Username, Password and Domain login when I connected to GPRS. So for those of you who do know it, here we go:
Username: web
Password: password
Domain: leave this blank.
Check the box to save the password.
Gil.

thanks, i will add it to my txt file
missed those

I am on O2 payg, using the xda, I have tried the gprs settings and it says the number isnt responding, when I use the gsm settings that are preset when doing auto config, I get charged even though I am on 300 free wap minutes, I dont think I am a stupid person but I have a feeling of having been here before when I previously had an O2 payg, any help would be appreciated. I am getting the free sms messages so I know the account is activated for the freebies. The "G" sysmbol comes on when i switch on the xda and stays there for about 10 seconds.

Hi. I'm new here so excuse me if I seem simple! I have unlocked my XDA using xdaunlock and now have same problem with GPRS dropping out after approx 10 seconds. It worked before, so has unlocking changed any settings? or has something else happened. The xda has the latest uk rom upgrade with 4.21 radio. Any help please as I dont know what to do! Thanks.

Please has anybody actually got a working setup for GPRS on O2 PAYG on the XDA, I have spent weeks on this and got nowhere. I have followed instructions to the letter from different websites and still no joy, I can connect to wap over gsm but gprs settings still elude me, anybody got a full description of settings please, and how to enter them. Thanks in advance.

Is there nobody on this forum using O2 PAYG sim and using wap over gprs? I cannot seem to find anybody with the settings, I wonder why, it seems like the holy grail just to get on line using the system that is available to me in theory? Help would be greatly appreciated.

Nobody in UK on O2 pay as you go :?: :?: :?:

Update on my problems with GPRS on O2 payg. I have tried every setting on this forum plus others, I always get error, not answering or some such, I have decided to stick to gsm connection using shortcode 951000 and exwap 2.5. if anybody can give me step by step, confirmed working settings, I would apprectiate it. This will be my last post on the subject, I am beginning to take up too much storage on the forum server with this. A resolution to the problem would be great as I can then save my connection settings to flash ram and not worry about it again.

cruisin-thru I am not on O2 so can offer limited help.
EzWAP2.5 could be yr problem.
I sometime find difficulty using WAP after a session mms'ing with EzWAP2.5 . A solf reset is then required before I can connect to WAP via gprs.
Here is my sugestion:
1.uninstall EzWAP2.5 completely
2.try to get connected to gprs or gsm WAP
3.try PIE, it works for WAP , but depending on yr
telco whether on gprs or gsm
4.if all the above is working then install EzWAP2.1
and see if it works
5.then EzWAP2.5 and see if it screw up everthing,
if not try mms.
Hope this helps, i am working blind here

OK, searched high and low and think this is the best thread to post this in.
Have just upgraded my XDA with the developers rom v1.2. Everything great for a while (3 days) Now it can not connect to gprs or gsm. I get the "There is no answer at the number dialed.
I am with O2 UK and have treble checked the settings and tried various alternatives however nothing works.
One thing I have noticed is that the autoconfig dropdown box says Austria One.....when I change that to O2 - UK and click OK to autoconfigure, it doesn't, it just comes back to Austria - One.
Phone works and SMS is fine, just GPRS/GSM
Do I need to re-flash or contact my provider....or please tell me there's a simple "fix" :lol:
Thanks

Ive got this reply through email from o2 im waiting now for password and username I will post soon as I get it
Go to Start > Settings > Connections > Connections, and then select the top modify option. Within this, there should be four connection types.... Select the GPRS WAP connection and modify the settings. You need to change anything that says o2wap to payandgo, and change the APN from WAP.o2.CO.UK to PAYANDGO.O2.CO.UK. Once you have amended these settings, tap and hold on this connection type and make it your default. You might want to rename this
Then, go into the EZwap application, and select tools and then options, and there should be a series of tabs. Select the general tab and make sure the connection in the drop down list, is the one you have just amended.
Click to expand...
Click to collapse

im on o2 online genie payg 300 free wap/txts per month.
i got my txts down to 200 and i get 25free mms per month instead
i got all wap/net working for free
just follow these bits of info it all works as i have it on my xda running wm2003 no need to config dsn and ip things in the advanced bit leave them how they are:
settings are:
MMS
Data bearer: GPRS
Access point name: wap.o2.co.uk
Username: o2wap
Password: password
Authentication: Normal Gateway IP address: 193.113.200.195
URL address: http://mmsc.mms.o2.co.uk:8002
Session mode: Permanent
GPRS
O2 Wap / Mobile Internet settings:
Homepage: http://wap.O2.co.uk/
Dialup access number: +44 771 2927927 (915000 dont work for xda)
APN (GPRS only): payandgo.o2.co.uk
Gateway (IP) address: 193.113.200.195
Username: O2wap
Password: password
Session type: Continuous / permanent
Port number: 9201
Note: Until May 2002, O2 Wap was known as Genie Wap (username 'geniewap').
The alternative dialup number of +44 7712 927 927 is also available,
although this number may not be free when used with O2 online
Hi, make sure first that it's your GPRS WAP connection that Ezwap is using, and set it to 'auto connect' in 'Options'
under the 'connection' tab set connection type to 'gateway' and put in your networks WAP IP address (o2 IRL's is 192.168.090.074). Click on 'connectionless gateway'
Untick 'wtls' secured connection.
Click on the 'MMS' settings tab next.
Put in your networks MMS 'Message Server' or MMS homepage. (O2 IRL's is http://mmsc.mms.o2.ie:8002)
All the other settings can be setup as you like.
1) Enable MMS on my account. Had to get 'pally' with a tech guy to do this as XDA is not supported; I suppose pretending I had a 7650 would have worked too.
2) Install EZWAP2.5
3) EZWAP Settings for O2UK:
General
"Connection"
- O2 WAP GPRS
- Connect automatically Y
- Rest on this tab default
Connection
"Connection Type"
- Gateway
- Address 193.113.200.195
- Port 9201
- Connectionless Gateway N
- WTLS secured connection N
- Rest on this tab default
Push
"Push"
- Enable push Y
- Connection type Address: blank
- Port 2901
- Connectionless Push gateway Y
- WTLS secured N
History/Cache & Identification - default
MMS
"MMS Settings"
-Message Server: http://mmsc.mms.o2.co.uk:8002
-Sender Address Type: Phone Number
-Sender Address: My phone number
MMS Options - delivery recepit and read receipt Y
It's not 100% reliable, which I knew would be the case, but it's not too bad. Get now when the message arrives doesn't work, but I just open the MMS inbox and click the message to get it.
ntl
username: Normal
incomming: pop.ntlworld.com
outgoing: smtp.o2.co.uk
02
username: [email protected]
incomming: mail.o2.co.uk
outgoing: smtp.o2.co.uk
Hotmail
username: [email protected]
incomming: http://services.msn.com/svcs/hotmail/httpmail.asp
outgoing: http://services.msn.com/svcs/hotmail/httpmail.asp

Please Help!! Need ATTWS GPRS?WAP Settings

I have been trying , unsucessfully, to configure my Siemens SX56 to connect to the internet and send e-mail after I upgraded to the Special Rom. It connects but doesn't load the pages and it tells me it cannot connect with current settings. I do not want to wipe clean my device and start over w/o the Special Rom because it has so many cool apps and after my contract expires I am on my way to T-Mobile, so unlocking is key! I have looked at this forum and there is no settings for ATTWS in US. Only Rogers (Canada) Can someone please help this newbie!
Thanks in advance for answering

AT&T WAP Settings
I figured it out since no one seemed to know. If anyone needs any settings for AT&T (US) here they are:
HTTP: localhost Port: 9090
WAP: 10.250.250.250 Port: 9201
Socks: 127.0.0.1 Port: 1080
Type is Socks 4
I created a new connnection called "MY connection Two" since the regular "GPRS connection" tab did not have a tab for proxy settings.

Re: AT&T WAP Settings
LBowers said:
I figured it out since no one seemed to know.
Click to expand...
Click to collapse
Sorry, I was away for a bit and would have answered if I had seen your request. The other parts I would add to your listed config are that the Access Point Name (APN) is:
Proxy
If you select Cellular Line (GPRS) as the transport, the dialing info will be filled in correctly by itself, resulting in something like "~0GPRS!Proxy" (not sure if that's exact, my XDA isn't right here. If for some reason you need to manually set a GPRS dial sting for ATTWS I believe it is:
*99*#
As opposed to to T-Mobile which is *99***2#

Thanks for answering Mad Max!!
Now if I can only get my Internet Explorer to work I would be all set!!!

Hi,
I'm an att sx56 user, flashed to t-mobile's 40016 for 2003. Everything works real nice but I can't seem to get the att gprs settings correct. Here's what I have,
For Modem Settings:
----------------------
Name: Myatt
Cellular Line(GPRS)
APN: *99*# ( i've also tried +0 ~GPRS!proxy)
username/password/domain all blank
TCP/IP: Use server specified IP address
Server: Use server assigned address
VPN Empty:
Proxy Settings:
-----------------
Localhost 9090
10.250.250.250 9201
127.0.0.1 1080
Socks4
Do you know if I'm missing anything or what I've got set wrong here?
Thanks!

elor said:
...but I can't seem to get the att gprs settings correct. Here's what I have,
For Modem Settings:
----------------------
APN: *99*# ( i've also tried +0 ~GPRS!proxy)
Click to expand...
Click to collapse
The APN should just be "proxy" alone. All the other junk (+0~GPRS!) is stuff the system fills in when it displays the dialing status, but shouldn't be included in your entry in the APN field. You shouldn't need to enter the *99*# string anywhere either unless you need to establish your own dialing config for some reason.
Also, the fact that you're entering proxy configs in WM2003 implies that you're setting up you connection under the "work settings" section as opposed to the "internet settings", which is fine, just wanted to make sure that's what you intended. Under 2003, unless you need to set proxy settings for your specific needs, then setting the APN name to "proxy" and selecting "Cellular Line (GPRS)" as the modem is pretty much all you need to do.

I have done what you both have said and still NO LUCK! AHH ok here is all of my specs:
Siemens SX56:
Windows Pocket PC Version 3.0.12039
ROM Version 3.17.03 ENG
ROM DATE 5/15/03
Radio Version A.20.10
Protocol Version 324e4

Confirming you're using the XDA-Dev SP ROM 1.2 if so leave try leaving your "proxy" settings blank and see if that helps.
HTH

no tilde stuff
I have been trying to do this stuff for a while now....
I am having the "page cannot be found" problem.
ppcpe 2003
ROM version : 4.00.05 ENG
Radio version: A.20.10
protocol version: 324e4
I set up a new connection called My GPRS.
I have all the right proxy settings (I've been reading forums on this for weeks now) I put "proxy" in as my APN name. On the modem tab, i have
Name: My Connection 1
Number: proxy
I don't see the ~GPRSyadayada....just proxy.
I have the Network Settings using My GPRS connection.
Here's the cooky part...I have a Yahoo chat software package that works great! I can send and receive like it's going out of style. But I cannot get Either internet explorer OR ftxPBrowser to connect to any pages.
What's up here?

Vodafone UK GPRS settings

Hi All
I have a MDA compact T-mobile. However, Im using Vodafone Network.
Does anyone know the GPRS settings for Vodafone UK and how to edit them?
I appreciate your help.
Alan

set the access point to internet
set the user name and password both to web
that's it

Hi
Thanks for that. How about the MMS settings?
I have set some in. But when I go to send the MMS, it says MMS sending for ages.. and I get a BOLD G on the title bar. Also, what does this mean? does it mean I'm connected or I have the option to contect?
Thanks.

cwwong said:
I have set some in. But when I go to send the MMS, it says MMS sending for ages.. and I get a BOLD G on the title bar. Also, what does this mean? does it mean I'm connected or I have the option to contect?
Click to expand...
Click to collapse
Attached Vodafone UK GPRS settings for contract. Let me know if you need payg version.
Try sending yourself an MMS first and then should all be ok - don't ask me why but I had the same problem and this suggestion worked for me.
The bold G on the title bar means that you have GPRS coverage.
Hope this helps,
OB.

Thanks for this..
I will try this and let u know!
Thanks.

This works a treat. Thanks.

To add to the 'can't send MMS' list of hints...
Additionally if you still have trouble sending MMS I found that if you delete the "\storage\Windows\MMS Log" folder and then send yourself an MMS all should be back in working order...
OB.

hi,
i need a pay and go vodafone settings. please can you upload. i cant connect to gprs.
i will be moving to India on Idea network after a months. So can anyone tell me the settings for that.
i have UK XDA II unlocked.
thanks

Here are the Vodafone PAYG settings - copy to PPC and click to install
No idea about India Network - None posted on official i-Mate wesite (www.clubimate.com) - Suggest contact them direct and ask...
OB.

spot on.. working already now... thanks

and can you also upload the settings for VIRGIN PAY n GO...
thanks

Here is Virgin - seems only to be one version as I think Virgin is all a type of PAYG...
OB.

hi.
thanks for that... virgin is working fine now... the thing is that when i installed Vodafone settings, it erased all the previous ones... now when i added virgin, vodafone has been erased...how to keep both
thanks

How to keep both!? Good question...
Only thing I can think of is to keep a copy of the cabs on your SD card (use CABINSTL so as not to delete after execute) and install as needed...
OB.

daduddaman said:
set the access point to internet
set the user name and password both to web
that's it
Click to expand...
Click to collapse
Just got my I-mate and have set up the GPRS for Vodafone UK Contract. I can successfully connect using the VF WAP Connection and VF MMS connection, but if I try the VF Internet GPRS connection, I get every time the error message 'The answering modem has disconnected'.
Anyone any idea how to fix this?
I can only load wap pages using the WAP connection and can't view any html sites. One of the main reasons I traded in my nokia 6230 was to browse html on a bigger screen.
Cheers,
Antoine

'The answering modem has disconnected'
toine said:
daduddaman said:
set the access point to internet
set the user name and password both to web
that's it
Click to expand...
Click to collapse
Just got my I-mate and have set up the GPRS for Vodafone UK Contract. I can successfully connect using the VF WAP Connection and VF MMS connection, but if I try the VF Internet GPRS connection, I get every time the error message 'The answering modem has disconnected'.
Anyone any idea how to fix this?
I can only load wap pages using the WAP connection and can't view any html sites. One of the main reasons I traded in my nokia 6230 was to browse html on a bigger screen.
Cheers,
Antoine
Click to expand...
Click to collapse
Hi - I have exactly the same issue with Jam/Vodafone UK/contract/GPRS. Has anyone out there got this combination working successfully?
TIA
Graham

Yes, I have, check out the conversation in http://forum.xda-developers.com/viewtopic.php?t=24848
If you can't get it to work with the details in there, give me a shout.
Cheers,
Toine

Thanks Toine. I saw the other thread after posting here.
You said you cured the problem by implementing gprs proxy settings. Can you please post exactly what settings and where you entered them?
Rgds
Graham

Graham -
I have two connections set up:
Vodafone MMS:
Modem: Cellular Line (GPRS)
APN: wap.vodafone.co.uk
Username: wap
Password: wap
Vodafone Internet:
Modem: Cellular Line (GPRS)
APN: wap.vodafone.co.uk
Username: wap
Password: wap
http proxy: 212.183.137.12:8799
and it works for me.
Cheers,
t

Thanks again Toine,
I've made progress - now able to browse WAP and Web sites - but still cannot get to my POP3 mailbox.
Could you check your reply? Did you mean to list "wap.vodafone.co.uk" for both connections? If so then I'm really confused... :?
Also, are both connections under "My Work Network"?
I've listed my full config below.
At present I can connect to WAP and Web using the "Vodafone WAP" connection, but if I try to get to my mailbox it says "Unable to connect: Ensure that your work modem is present and inserted correctly, and no network card is present."
The Vodafone Internet connection (using APN of "internet") still refuses to play, saying "The answering modem has disconnected."
i-mate Jam
ROM version: 1.12.00 WWE
ROM date: 05/28/05
Radio version: 1.12.10
Protocol version: 1337.42
ExtROM version: 1.12.131 WWE
My Work Network
Name: Vodafone WAP
Modem: Cellular Line (GPRS)
APN: wap.vodafone.co.uk
User: wap
Password: wap
Domain: *blank*
Advanced:
TCP/IP: Use server-assigned IP address
Servers: Use server-assigned addresses
Name: Vodafone Internet
Modem: Cellular Line (GPRS)
APN: internet
User: web
Password: web
Domain: *blank*
Advanced:
TCP/IP: Use server-assigned IP address
Servers: Use server-assigned addresses
Proxy Settings:
Proxy Server: 212.183.137.12
Advanced:
HTTP: 212.183.137.12:8799
WAP: 212.183.137.12:9201
Secure WAP: *blank* :9203
Socks: 212.183.137.12:1080
Socks 4
Rgds
Graham

T-Mobile USA, iMate Jam and GPRS. HELP!!!!

Hey there,.....ultimate noob posting here but here goes.
I have an unlocked iMate Jam on the T-Mobile USA network. I have upgraded my plan to include the internet on this phone. These are my phone settings/information:
ROM Version: 1.11.00 WWE
Radio Version: 1.11.00
Protocol Version: 1337.42
ExtROM Version: 1.11.210 WWE
Model #: PM10C
The problem is that I cannot connect to GPRS to get or get MMS. I have gone through the connection settings with t-mobile reps about 20 times and I'm SURE they are correct.
Does anyone know what's going on here? Is it my ROM version. One t-mob rep seemed to think that my ROM version was unsupported. Has anyone else had this problem. Can anyone shed any light? Thanks.

By George, I think I've got it...
Hey, I think that one of the other guys on the forum, figured it out. Check out this post. It is working great for me. I love this forum!!!!!!!!!
http://forum.xda-developers.com/viewtopic.php?t=25662&highlight=tmobile+usa+gprs

I also have an Imate-Jam and I'd like some help from you guys sothat I can read and write chinese for text messaging... I know that there are softwares like monster chinese or CE-star about US $40, is there any alternate way instead of buying the software? since I'm not a bigpocket kinda person please help... thank you

GRRRR
Since the post from Elite has NOTHING to do with the subject of this forum, we are going to ignore it and continue to talk about this issue at hand.
FYI- After my last post, my GPRS internet seems to be working fine. I have to soft reset every once in a while but considering the level of functionality that I have had up till now, I'll take whatever I can get.
The only obstacle left for me is MMS. The iMate notifies me that an MMS message is available for download but when I click on download, it attempts to open my WAP connection (T-mobile rep said that MMS always uses a WAP connection) the connection says that it connects (after looooonnnnggg time) and then says 'receiving' but it NEVER downloads the rest of the MMS message.
All I want to know is if any other T-mobile USA customers have had similar problems. If so, is there any info you can provide me that would help me fix this for all of us.

Ok well here is the 411 on gprs and mms on T-mobile I have run and used both since the xda II was out. I now have a xda IIi and confirm everything works fine. You need to make sure you have the right internet or data service enabled before try! They have two data services. One is just wap which does not give you full access to the internet as in open ports on there network. The other is unlimited internet which is like 19.99. That gives you full access. Configure your device as the following and you will be fine for mms. Also you need your apn correct. Usually on tmobile its internet2.voicestream.com or internet3.voicestream.com. You can call in and ask.
MMS Setting are as follows on any pocket pc phone.
1 Under My Work Network, select “Add a new modem connection”
2 Enter a name for your connection; I used “MMS”
3 From the Select a modem drop down choose Cellular Line (GPRS)
4 Tap Next
5 In the text box labeled (Access point name) type in wap.voicestream.com
6 Tap Next
7 Leave the User name, Password, and Domain fields blank
8 Tap Finish
9 Tap the Proxy Settings tab
10 Place a check in both boxes
11 Leave “Proxy server” blank
12 Tap Advanced
13 Leave HTTP and Socks Server fields blank.
14 Enter 216.155.165.50 for your WAP server. Port # is 9201
15 Enter 216.155.165.50 for your Secure WAP server. Port # is 9201
16 Tap OK twice
Now go to your MMS program and set it up, create a new server and I called mine T-Zones. Here are those settings.
Server Name: T-Zones
Gateway: 216.155.165.50
Port: 9201
Server Address: http://216.155.174.84/servlets/mms
Tap ok
Now go to preferences and enter these settings,
Connect Via: My Work Network
Connect to Server: T-Zones
(check the box to retrieve messages immediately)
And it should work.
Enjoy!

PAYG O2 GPRS setting not working

Hi
I have a Qtek 9100 running the O2 XDA Mini S Official WM5 Rom.
I am trying to set it up to access the internet using a PAYG o2 sim. I have followed a couple
of guides from this site but it still will not work.
I can connect to GPRS ok but when I try to connect to a page on the web,
I get an error message saying
"the page cannot be dispalyed or downloadedbecause the connection was lost. Check the onnection and try again later"
I still have a GPRS connection when I get this message.
My setting are;
modem-Cellular line (GPRS)
Access popint name - payandgo.o2.co.uk
username - payandgo
password - password
Advanced settings - use server assigned IP addesss
use server-assigned addresses
connection name o2
modem cellular line (gprs)
access point name - payandgo.o2.co.uk
username - payandgo
password - password
domain -
Advanced
use server-assigend ip address
proxy settings
both boxes ticked
http - 192.113.200.195:8080
WAP - 192.113.200.195:8080
What am I doing wrong.
I'm new to this so be gentle!!!

just figured out what I'm doing wrong.
I had two connection set up .
I have deleted the first one and now I can connect.

Pleased it's working, but it really gobbles up the cash on PAYG.
Mike

do you have to set up gprs with o2? do you have to tell them you want it?
ive got an o2 pay as you go sim, i can connect but it doesnt seem to work properlly like you stated. ive not contacted o2 to 'turn on' gprs for me so i dont know if its that.