Hi Guys
Can anyone give me a hand with setting up the GPRS settings for 02 on the PPC2003 4001 with my 64Mb XDA.
I followed the settings in this post.
I cannot get this to work however.
Any hints???
Thanks
on the additional software disk that came with the xda are two programs 'ezrestore' and 'ezinstall' that claim to be able to restore/setup gprs on xda's. i have not used either of them.................
.............yet!
if you are unable to locate them i can send them to you
ianlake said:
on the additional software disk that came with the xda are two programs 'ezrestore' and 'ezinstall' that claim to be able to restore/setup gprs on xda's. i have not used either of them.................
.............yet!
if you are unable to locate them i can send them to you
Click to expand...
Click to collapse
don't use these they don't work. the device is not recognised.
yeah found that out my self
so, has anyone got the right settings then? and could they post them here please
bump, anyone????
Related
can any body help me to get this xda to work on wap
also i have found a screen with country
prepa post pay boxes to tick but i cannot change the post pay any ideas
scoty5253 said:
can any body help me to get this xda to work on wap
also i have found a screen with country
prepa post pay boxes to tick but i cannot change the post pay any ideas
Click to expand...
Click to collapse
Hi there scoty5253, sorry if I makethis sound obvious, or if i'm wrong :wink: to change to the wap setting all you do under my xda>connections>gsm>finish. the xda will soft reset and you should be set to go, as per changing the post and pre pay, can't help, sorry.
PS, my country is set to Germany ( i'm in the uk ) doesn't make a difference in that respect, leave it set to Germany, if it is. ( thanks for the tip DCS 8) )
networking on xda2 on o2
thanks for replies but when i try to go on wap or web keep getting message to say no modem found at this location
any ideas?
Re: networking on xda2 on o2
scoty5253 said:
thanks for replies but when i try to go on wap or web keep getting message to say no modem found at this location
any ideas?
Click to expand...
Click to collapse
How and with what are you trying to access the web ? via the start menu or from the splash screen ?
I think if its the former then you need to get some settings sorted out, I used to have trouble with doing it that way so now I just use the o2 portal and link from my favourites menu.
I'm not all that clued up so I may be mistaken, I'm sure somebody else can steer you through it if I'm wrong.
HTH
First off hi all, been a background reader for a week or so now,
My XDA Exec has now landed and wondered if a nice soul could help a guy out.
Although i'm pc savvy phones are not my forte, i cannot seem to find in the manual info on how to access the internet via 3g ie when im in the boozer and not on my lan at home.
Can someone point in the right direction, do i need to set it up via new isp, 3g provider?? if so what are the settings for O2 uk
Many thanks
Hi,
I take it you have a 3g SIM from O2? If you have, you can get their setup settings from the O2 website and once those are in your Exec whenever you launch an app that needs internet access it "should" automaticly try and connect via 3g.
Cheers buddy will have a look
alternatively there is a link somewhere on the forum (try searching for O2 settings) that lets you download a cab with the settings and you just run the cab. it may look like its going to install o2 active, but it doesnt. Just choose Personal and it will install the connection settings
dazzled said:
Cheers buddy will have a look
Click to expand...
Click to collapse
If you let the device starup as normal, with all O2 skins and customisation, then everything will be put in for you.
As it says in the manual.... :wink:
numanoids said:
alternatively there is a link somewhere on the forum (try searching for O2 settings) that lets you download a cab with the settings and you just run the cab. it may look like its going to install o2 active, but it doesnt. Just choose Personal and it will install the connection settings
Click to expand...
Click to collapse
That link is here...
http://caravan-smart.co.uk/xda-exec.asp
Thanks to dingo!
Fin
findus said:
numanoids said:
alternatively there is a link somewhere on the forum (try searching for O2 settings) that lets you download a cab with the settings and you just run the cab. it may look like its going to install o2 active, but it doesnt. Just choose Personal and it will install the connection settings
Click to expand...
Click to collapse
That link is here...
http://caravan-smart.co.uk/xda-exec.asp
Thanks to dingo!
Fin
Click to expand...
Click to collapse
Yeah thanks to whoever did that CAB that was really helpful!
I have upgrade my o2 xda exec to the latest qtek rom.
However i do not how to setup the various o2 services.
Anyone know what they are and where they go?
thanks.
The simple answer to your question is yes I do.
If you want the settings there is a thread somewhere with a cab file that you simply run and it will put all the settings in for you.
I can not remember where the thread is but once you find it put the file somewhere safe for next time.
I could send it you if you PM me your email address.
these ones work fine on my exec i also used these ones fine on my old spv m2000
do all the ones that quqi sat says
http://forum.xda-developers.com/viewtopic.php?t=13861&highlight=
thanks alot!
i did search but to no avail.
however i killed my less than 24hours old xda exec. trying to fix it in the upgrading thread.
im gutted...
MMS on o2 xda exec (contract)
still no luck with MMS on o2 xda exec (contract)...
anyone out there have one?
check this site
http://www.modaco.com/lofiversion/index.php/t233876.html#
i sort of asked the same question last week and someone kindly posted a cab file for the settings in the thread
http://forum.xda-developers.com/viewtopic.php?t=46540
thanks.
it appears my problem is setting up Push Email and MMS.
they want to use different gprs settings...
Hi,
First I have to tell you that I've got the HTC Uni/MDA Pro from T-Mobile. It's a fantastic pocket pc and it's also great as a mobile phone but I've got one problem.
Till the end of august I've got the "Mobile-TV" option for free but I think I can't use it at the moment. The instructions from T-Mobile are: "select t-zones and then TV&Video > MobileTV". But just after I've bought the MDA I installed the Qtek Rom so I can't find the "t-zones" anywhere. Is there any possibility how I can watch/use this "MobileTV" option? Maybe after installing a CAB or something like that?
Thanks a lot
TCK
TCK said:
Hi,
First I have to tell you that I've got the HTC Uni/MDA Pro from T-Mobile. It's a fantastic pocket pc and it's also great as a mobile phone but I've got one problem.
Till the end of august I've got the "Mobile-TV" option for free but I think I can't use it at the moment. The instructions from T-Mobile are: "select t-zones and then TV&Video > MobileTV". But just after I've bought the MDA I installed the Qtek Rom so I can't find the "t-zones" anywhere. Is there any possibility how I can watch/use this "MobileTV" option? Maybe after installing a CAB or something like that?
Thanks a lot
TCK
Click to expand...
Click to collapse
first: configure the web-access - I think you've already done that.
2nd: configure WAP access over the net access: I've reached that configured the WAP proxy in the settings/connections menu editing the net-connection.
now you have to find out the wap portal's address.
use wsp:// tag before the address.
The only problem is to make sure that this download through the wap proxy doesn't use your monthly data amount included..
The wap page is wap.t-mobile.co.uk or www.t-zones.co.uk
Hi folks,
I just received my HTC TyTn today and thought I would post to say that it is AWESOME! So much smaller and pocketable than the Exec, 802.11G and a very slick keyboard.
Also, and more importantly, I found that the O2 Settings CAB from my old XDA EXEC works 100% perfectly on this device for setting up MMS / 3G GPRS / WAP etc. Its a single cab which simply installs those settings and no other O2 Active junk etc. Bear in mind this is for O2 UK only and will probably screw-up your device if you are using it in another territory.
I fully tested this with email / terminal services / mms messages and all worked perfectly. I have attached the CAB in a Zip archive (don't forget to log in to see it).
I hope someone finds this useful.
All the best,
Codeus
lol wish i had this when i got mine, i had to manually enter the settings which was a right pain....does the cab install the settings for the http AP over GPRS/3G rather than the standard wap one??
Yes, the Exec which I got the .cab from is also a GPRS 3G phone. so it works perfectly.
I tend to copy useful little cabs like this to my flash card and make them read-only so I can reinstall should I ever have to hard-reset on the road.
Codeus
mrvanx said:
lol wish i had this when i got mine, i had to manually enter the settings which was a right pain....does the cab install the settings for the http AP over GPRS/3G rather than the standard wap one??
Click to expand...
Click to collapse
After about an hour of stumbling about trying to find O2 settings for my TyTN I found your post .... cab is absolutely fantastic, thanks!
GPRS
A bit new to this but hoew do you use the cab codes you have given us.
And do you no if it will work with the o2 pay and go sim
Regards Jack
O2 settings
Jackjack said:
A bit new to this but hoew do you use the cab codes you have given us.
And do you no if it will work with the o2 pay and go sim
Regards Jack
Click to expand...
Click to collapse
This is a very handy Cab file. It is likely to be for those who have a data tarriff i.e subscribed to mobile.O2.co.uk and not payandgo.o2.uk. However all is not lost because you can still install the cab file and then through connections menus you can tweak them for payand go. The following reference shows the different entries between payg and contract:
http://www.mphone.co.uk/mms_wap_settings_o2.html
Installing the cab file. Just download it either directly to your device or to PC. Do not extract or expand the file if it's on your PC just open active sync, use the explore button to open your device files and put it where you want (storage card for preference). Go to your device and tap/double tap the Cab and it will run.
Mike
O2 Cab file
JackJack
I've just noticed your in the US. This cab file is for UK so I guess not much use for you. What I said about Cab files still applies in general though. You'll often find a choice as to whether you want to download a Cab file or an EXE file. Generally (not always) you run Exe files on your computer and they install to your device (while your conected with activesync). Cab files you copy onto your device and just tap them to run them. I like these cos I can store all the good ones on my SDcard and if I ever have to hard reset I have them all ready to tap and install again without resorting to the PC to reinstall everything.
Mike
mda cab file o2 settings
i have a mda compact phn which is a t.mobile company.. its been open 2 o2.. i wld like 2 use internet but i wld like d settings
lady_tweetie said:
i have a mda compact phn which is a t.mobile company.. its been open 2 o2.. i wld like 2 use internet but i wld like d settings
Click to expand...
Click to collapse
plse help am nw at dis
Brillant, thank you
Thanks for that CAB, just used it to get my Kaiser working.
Just had to change the username and password in the settings and works perfectly.
Many thanks for sharing it.
I tried using this cab, and so far it seems to be all good, but I still can't get my MMS working. They haven't worked since I moved to 02 last year and still using my Vario II.
I've just flashed the Faria32 rom and I'm loving everything so far. I was hoping that this would now start working. Does anyone have any suggestions? Or is it just part of the deal with using a non O2 handset? Internet seems to be working fine... just no mms.
Incoming MMS problems on o2 PAYG fixed
I've had a problem with O2 PAYG, after installing the CAB and changing settings from contract to PAYG everything worked except incoming MMS (outgoing was ok). Eventuially I set O2 Active as my work connection, altered the O2 Active access point to payandgo.o2.co.uk, username=payandgo and password=password. The only proxy set was WAP=193.113.200.195:9201 In the MMS settings, the everything was left as default (connect using O2 Active, gateway 193.113.200.195, port 8080, server http://mmsc.mms.o2.co.uk:8002)
Not sure why I had to use O2 Active instead of my internet connection with WAP proxy set, but it works now. Happy Bunny
Incidentaially, O2 refused to help me because the Hermes (O2 Trion) is only supported on contract. I guess if you are on PAYG, you could move to a simplicity plan for a month, get O2 to help, then go back to PAYG and change the settings back to the payandgo ones.
One of the reasons I went back to O2 is cos I've always had good customer service... I'm beginning to rethink that with their "computer says no!" help...
Thanks for the help i'm going to see if the O2 Active settings help me at all.
Anno 2009 still working, thank you.
tytn 2 gprs probs on o2 pay and go
hey all
if u are a pay and go customer (im on o2) when ur setting up ur connections simply enter the contract APN in the access point area..not the pay and go one as its restricted. I did this and boom the tytn was on the net! I suspect this could be the same for other pay and go sims. Hope this helps those of u who were bangin their head against the gprs wall of pay and go smartfone world.
Here's the cab file for setting up gprs and mms for PAYG.
Sorry for being such a noob, but what do I do with the cab files after downloading them..?
Where do I copy them to..?
Do I extract them..?
keenan316 said:
Sorry for being such a noob, but what do I do with the cab files after downloading them..?
Where do I copy them to..?
Do I extract them..?
Click to expand...
Click to collapse
Download, copy to device (anywhere, even storage card), run on the device and let it install. That's it.
thanks this worked great on my pay and go O2 HTC Touch Diamond P3700