Related
Hi,
Does anyone have or know where I can get a hold of this file. I flashed my Vario with the K-Jam Rom and now can't connect to the network.
Thanks
Did You mean Can't make calls?
Or internet?
Here are the T-Mobile US Settings, which is what I assume you're looking for.
Jon.
Thanks for the file. I programed in the internet settings myself, and although it was slow, it finally connected to T-Mobile for voice calls.
Cheers,
dadarkmcse said:
Here are the T-Mobile US Settings, which is what I assume you're looking for.
Jon.
Click to expand...
Click to collapse
Jon - you rock. I thought I was about to spend too much additional money for a frinkin' cab file. got mms and gprs to work. now if I can just figure out how to set up email and get a wireless lan bug i have.
On the wireless side - I can get it to connect to my wireless router - but I cannot get it to browse the web via pocket IE. Any thoughts out there?
Justin Hoss (JHo)
If you are using T-Zones service you can't get IE to work straight off as they have disabled port 80 and you can only go through the T-Zones proxy. It's a pain - the way around is go into T-zones (wap.myvoicestream.com) and use the options in the menu there to get to the web pages you want - I set up the ones I use as T-Zones bookmarks. I have a feeling if you pay for the 19.99 monthly internet service you can use the IE straight but havent tried that yet
Ok, maybe a stupid question, but what does this file really do?
I had Internet service working ok with the plain jane qtek 9100 rom after making an account and poking in the right GPRS gateway, and voice calls worked as soon as I put in the sim. Text and MMS seemed fine too (at least until I upgraded to the new qtek rom - but that's another thread).
So I'm sure I'm missing something, but what actually is in the CAB?
JoninLA said:
If you are using T-Zones service you can't get IE to work straight off as they have disabled port 80 and you can only go through the T-Zones proxy. It's a pain - the way around is go into T-zones (wap.myvoicestream.com) and use the options in the menu there to get to the web pages you want - I set up the ones I use as T-Zones bookmarks. I have a feeling if you pay for the 19.99 monthly internet service you can use the IE straight but havent tried that yet
Click to expand...
Click to collapse
I am not sure I understand the approach you are giving - if I want to leverage my current ISP provider and my wireless LAN connection on my K-JAM - I have to do what? What seems to be happening is I can connect to my WLAN at home - get an IP address, good signal, etc - however - when I try to go to Google or something - is says "Locating" but never connects. I messed around with the proxy setting for T-Mobile and actually turned them off - and was able to connect through my WLAN (not GPRS) - however, that screwed up my WAP setting and now I can't ge into wap.myvoicestream.com (of course). Anybody have the manual settings for the T-mobile proxy they can share? I tried reloading the T-mobile .cab file - but it errors out.
Don't you think there should be a way to use your WLAN (which I already pay for and does not cost T-Mobile any $$) and GPRS t-zones (which I already pay T-Mobile for)?
thanks works great
settings, setup? Please help!
Please help!
I installed the file, nothing seems to be changed. All the connection settings dissapeared from setup. when I go to IE, web page, right away gives me an arror message, "can't connect". before it was "loading" and it was like forever..
May be I should put in the settings manually?
Is there a detail how?
I have WM6.1 (TMobile, internet service active on the plan)
I spent hours calling tmobile tech support,, - 0!
PLEASE GIVE AN ADVICE!
Thanks a lot!
Have any of you tried my Tmobile CABs ?
Hi there, I'm about to update my Qtek 9100 to the latest WWE ROM posted last week. Is there anything very important I should know before I do this? I already backed up all my information and files, and I'm currently running on the Cingular US network. I tried searching for the official Cingular 8125 ROM but wasn't able to find it. I really, REALLY want to have the exact same settings as the 8125 does for connecting to the internet so I get full speed EDGE and the best phone signal it can offer. Could anybody please tell me how to set up my Qtek so it's exactly the same, including the E icon when I'm in an EDGE-covered area? I did a search for everything, but all I managed to find were a bunch of posts where everybody knew what everybody else was talking about. I managed to find the cab file named "Signed_Edge_Icon.sa" but I honestly have no idea what to do with it. As I said, I'm completely new to this, and I just want my Qtek 9100 to perform the best it possible can on Cingular's network. Thank you so much!
Cingular Settings
Hi,
Cingular has a blow by blow description of the settings.
https://onlinecare.cingular.com/dev...ingular.atgnow.com/cng/tutorials/KB56475.html
are the internet settings
.... and .....
https://onlinecare.cingular.com/dev...ingular.atgnow.com/cng/tutorials/KB56044.html
are the MMS settings
And for the cab file, just use activesync (press the explore icon) to drag the cab file to you phone and then tap it to run it.
Cool, I got that cab installed, but I'm having trouble with those Cingular settings... I don't have a "Set up Proxy Server" option under the first My ISP list. I do have it under My Work Network, but to my understanding that is a completely different connection option. Is it okay to have the wap.cingular connection under My ISP and the proxy server information under My Work Network, or should I just put everything under My Work Network and leave My ISP alone?
Through my experience the proxy settings for Cingular do two things (one good one bad) and your decision to use them should be based on which is more necessary to you.
1. The proxy settings allow you to use the MEdia Net homepage at device.home
2. The proxy settings screw with your WIFI connection and cause timeout errors and such when attempting to browse at home.
I personally find that the MEdia Net homepage is nice, but I can live without it or even replace it with other things like google.com/ig.
If you want to enable the proxy settings on the My ISP panel go to the advanced tab and create a new profile where My ISP is. For some reason the new one will allow you to put in proxy settings, but the default My ISP won't.
Hi folks,
I just received my HTC TyTn today and thought I would post to say that it is AWESOME! So much smaller and pocketable than the Exec, 802.11G and a very slick keyboard.
Also, and more importantly, I found that the O2 Settings CAB from my old XDA EXEC works 100% perfectly on this device for setting up MMS / 3G GPRS / WAP etc. Its a single cab which simply installs those settings and no other O2 Active junk etc. Bear in mind this is for O2 UK only and will probably screw-up your device if you are using it in another territory.
I fully tested this with email / terminal services / mms messages and all worked perfectly. I have attached the CAB in a Zip archive (don't forget to log in to see it).
I hope someone finds this useful.
All the best,
Codeus
lol wish i had this when i got mine, i had to manually enter the settings which was a right pain....does the cab install the settings for the http AP over GPRS/3G rather than the standard wap one??
Yes, the Exec which I got the .cab from is also a GPRS 3G phone. so it works perfectly.
I tend to copy useful little cabs like this to my flash card and make them read-only so I can reinstall should I ever have to hard-reset on the road.
Codeus
mrvanx said:
lol wish i had this when i got mine, i had to manually enter the settings which was a right pain....does the cab install the settings for the http AP over GPRS/3G rather than the standard wap one??
Click to expand...
Click to collapse
After about an hour of stumbling about trying to find O2 settings for my TyTN I found your post .... cab is absolutely fantastic, thanks!
GPRS
A bit new to this but hoew do you use the cab codes you have given us.
And do you no if it will work with the o2 pay and go sim
Regards Jack
O2 settings
Jackjack said:
A bit new to this but hoew do you use the cab codes you have given us.
And do you no if it will work with the o2 pay and go sim
Regards Jack
Click to expand...
Click to collapse
This is a very handy Cab file. It is likely to be for those who have a data tarriff i.e subscribed to mobile.O2.co.uk and not payandgo.o2.uk. However all is not lost because you can still install the cab file and then through connections menus you can tweak them for payand go. The following reference shows the different entries between payg and contract:
http://www.mphone.co.uk/mms_wap_settings_o2.html
Installing the cab file. Just download it either directly to your device or to PC. Do not extract or expand the file if it's on your PC just open active sync, use the explore button to open your device files and put it where you want (storage card for preference). Go to your device and tap/double tap the Cab and it will run.
Mike
O2 Cab file
JackJack
I've just noticed your in the US. This cab file is for UK so I guess not much use for you. What I said about Cab files still applies in general though. You'll often find a choice as to whether you want to download a Cab file or an EXE file. Generally (not always) you run Exe files on your computer and they install to your device (while your conected with activesync). Cab files you copy onto your device and just tap them to run them. I like these cos I can store all the good ones on my SDcard and if I ever have to hard reset I have them all ready to tap and install again without resorting to the PC to reinstall everything.
Mike
mda cab file o2 settings
i have a mda compact phn which is a t.mobile company.. its been open 2 o2.. i wld like 2 use internet but i wld like d settings
lady_tweetie said:
i have a mda compact phn which is a t.mobile company.. its been open 2 o2.. i wld like 2 use internet but i wld like d settings
Click to expand...
Click to collapse
plse help am nw at dis
Brillant, thank you
Thanks for that CAB, just used it to get my Kaiser working.
Just had to change the username and password in the settings and works perfectly.
Many thanks for sharing it.
I tried using this cab, and so far it seems to be all good, but I still can't get my MMS working. They haven't worked since I moved to 02 last year and still using my Vario II.
I've just flashed the Faria32 rom and I'm loving everything so far. I was hoping that this would now start working. Does anyone have any suggestions? Or is it just part of the deal with using a non O2 handset? Internet seems to be working fine... just no mms.
Incoming MMS problems on o2 PAYG fixed
I've had a problem with O2 PAYG, after installing the CAB and changing settings from contract to PAYG everything worked except incoming MMS (outgoing was ok). Eventuially I set O2 Active as my work connection, altered the O2 Active access point to payandgo.o2.co.uk, username=payandgo and password=password. The only proxy set was WAP=193.113.200.195:9201 In the MMS settings, the everything was left as default (connect using O2 Active, gateway 193.113.200.195, port 8080, server http://mmsc.mms.o2.co.uk:8002)
Not sure why I had to use O2 Active instead of my internet connection with WAP proxy set, but it works now. Happy Bunny
Incidentaially, O2 refused to help me because the Hermes (O2 Trion) is only supported on contract. I guess if you are on PAYG, you could move to a simplicity plan for a month, get O2 to help, then go back to PAYG and change the settings back to the payandgo ones.
One of the reasons I went back to O2 is cos I've always had good customer service... I'm beginning to rethink that with their "computer says no!" help...
Thanks for the help i'm going to see if the O2 Active settings help me at all.
Anno 2009 still working, thank you.
tytn 2 gprs probs on o2 pay and go
hey all
if u are a pay and go customer (im on o2) when ur setting up ur connections simply enter the contract APN in the access point area..not the pay and go one as its restricted. I did this and boom the tytn was on the net! I suspect this could be the same for other pay and go sims. Hope this helps those of u who were bangin their head against the gprs wall of pay and go smartfone world.
Here's the cab file for setting up gprs and mms for PAYG.
Sorry for being such a noob, but what do I do with the cab files after downloading them..?
Where do I copy them to..?
Do I extract them..?
keenan316 said:
Sorry for being such a noob, but what do I do with the cab files after downloading them..?
Where do I copy them to..?
Do I extract them..?
Click to expand...
Click to collapse
Download, copy to device (anywhere, even storage card), run on the device and let it install. That's it.
thanks this worked great on my pay and go O2 HTC Touch Diamond P3700
I know that there have been requests for this so here we are.
The attached ZIP file contains the CAB to automatically configure GPRS and MMS connections for the Virgin UK network. It has been successfully tested on an XDA II and SPV M1000, both of which are running 2003 SE. I don't have a pre-2003 or Mobile 5 device to try it on so I don't know if it works on them.
The 2 connections which are set up are called:
Virgin GPRS - this has been configured to also allow MSN Messenger to be used.
Virgin MMS
Before using it, I would advise the removal of any existing GPRS and MMS connection settings (though the choice is obviously yours). I would also advise to check that your happy with all of the MMS options/settings following the install (e.g. Save Sent messages is switched off with this CAB).
At last - God knows what i was doing wrong but with this cab and some manual setup of the Connection side of thing i have managed to send an MMS.
This CAB setup the MMS side perfectly (nothing on GPRS) - as i was typing from what i can gather ok for IP i was using the full xxx.xxx.xxx.xxx and server name i had put goto.virginmobile.uk whereas this cab just say picture message (not sure if this would cause and issue), but i am doing the connection via: My Work Network as thats where i setup the GPRS, rather than internet.
My Mobile is a Voda Compact III 1605, running HTC Rom 1.35 with windows mobile 5 - and have sent my 1st MMS after trying over a few days!
thanks
How do I install this cab file?
Copy the CAB file to your device and execute it...
sbgorner, you rule!!!
iv been trying to get my mms to work for 5 days now and was readt to smash my phone to pieces. your cab worked perfectly.
Thanks V Much
sbgorner said:
I know that there have been requests for this so here we are.
The attached ZIP file contains the CAB to automatically configure GPRS and MMS connections for the Virgin UK network. It has been successfully tested on an XDA II and SPV M1000, both of which are running 2003 SE. I don't have a pre-2003 or Mobile 5 device to try it on so I don't know if it works on them.
The 2 connections which are set up are called:
Virgin GPRS - this has been configured to also allow MSN Messenger to be used.
Virgin MMS
Before using it, I would advise the removal of any existing GPRS and MMS connection settings (though the choice is obviously yours). I would also advise to check that your happy with all of the MMS options/settings following the install (e.g. Save Sent messages is switched off with this CAB).
Click to expand...
Click to collapse
Thanks for that, I'll try it.
sbgorner said:
I know that there have been requests for this so here we are.
The attached ZIP file contains the CAB to automatically configure GPRS and MMS connections for the Virgin UK network. It has been successfully tested on an XDA II and SPV M1000, both of which are running 2003 SE. I don't have a pre-2003 or Mobile 5 device to try it on so I don't know if it works on them.
The 2 connections which are set up are called:
Virgin GPRS - this has been configured to also allow MSN Messenger to be used.
Virgin MMS
Before using it, I would advise the removal of any existing GPRS and MMS connection settings (though the choice is obviously yours). I would also advise to check that your happy with all of the MMS options/settings following the install (e.g. Save Sent messages is switched off with this CAB).
Click to expand...
Click to collapse
I tryed it, No luck.
It installs on my O2 XDA mini s, but still no connection
Maybe you know some other way to do it.
Many Thanks
Remove old network connections before installing the CAB
The CAB file does really rely on the fact that there are no existing network specific connection details installed on the XDA. The best way to ensure that old network connections are not affecting the Virgin settings is to delete them, i.e. ensure that only the standard "My ISP" and "My Work Network" entries are still present.
1) Go to Start->Settings and on the "Connections" tab, tap on the Connections icon.
2) Tap on the "Advanced" tab.
3) Tap on the "Select Networks" button.
4) Use the drop-down arrow to select an entry (do not select "My ISP" or "My Work Network").
5) Tap on the "Edit..." button.
6) Tap on the "General" tab.
7) Tap on the "Delete Settings" icon.
8) Repeat steps 4 to 7 until all of the entries (do not select "My ISP" or "My Work Network") have been removed.
Having removed all of the network specific connection entries, try reinstalling the Virgin UK cab file again and everything should work.
You diamond. Just sent Virgin a bollocking. They suggested I contact O2 about setting this up. Your cab file much appreciated by a middle aged member.
Thanks
Will try!
Much appreciated!
SW
Just tried this after a week of trying various settings, now got access to gprs, thanks.
I have followed your instructions but after running the CAB file the VArio II still doesn't connect. If I click on the edit settings link it doesn't think there are any settings, as I only have the option to install a new ISP. However if I try to manually install a new ISP using the name Virgin GPRS it won't let me as it says a connection already exists with that name, but nowhere can I find any trace of that connection. What is going on please?
leswaller said:
I have followed your instructions but after running the CAB file the VArio II still doesn't connect. If I click on the edit settings link it doesn't think there are any settings, as I only have the option to install a new ISP. However if I try to manually install a new ISP using the name Virgin GPRS it won't let me as it says a connection already exists with that name, but nowhere can I find any trace of that connection. What is going on please?
Click to expand...
Click to collapse
I'm in exactly the same position with my O2 XDA mini S.
I could possibly try using a different ISP name but I'd rather find out why this is happening and delete the connections made by the CAB file. As I can't find the connections though I can't delete them.
Ok, Time for an update.
Using Virgin GPRS2 didn't work and I've found out how to remove the setting created by the CAB file. I went to add and remove programs and removed the changes that way.
I have followed the instructions from this thread to no avail. http://forum.xda-developers.com/showthread.php?t=238042&highlight=virgin+gprs
I'll keep plodding along but if someone can offer any suggestions i'd lve to hear them.
Ps. Don't be rude.
Hi Bouncypete
I also discovered that I could get rid of the bad settings using remove programs, but am also no further forward in finding the correct settings. I have sent a private email to sbgorner (he doesn't appear to subscribe to any forums) but have not had a reply. Anybody else out there got any ideas?
Virgin GPRS settings
Hi Bouncypete -success!!!
I have found an older posting from sbgorner which gives a blow by blow manual way of doing the settings and it works!!.
I will try and attach this as a pdf, but if the attachment doesn't come through then email me and I will send it to you direct
ran VirginUK.CAB - no settings added
I deleted all the old gprs etc connection settings and ran CAB file, but get no settings visable in network connections just "my isp" and my work network". When I try and enter settings manually I get to the "modem" new page and enter Virgin GPRS or MMS select Cellular GPRS/3G and next and it tell me I'm adding a duplicate setting although there are no settings visible. This happens after removing the CAB settings that make no difference in remove programs? Any Ideas apart from clearing the phone down?
Thanks for the pdf link - sorted me & my orbit out
Virgin UK network settings
I have been trying for ages to get my HTC Blueangel to link into the internet.
This CAB file did the job for me. Surprise, surprise (for me at least) IT WORKS.
Mobile internet here I come!
I just got this X01HT(Hermes200) with WM6 (Schap's 3.30c ROM) from eBay, and I am new to this forum. I am thinking to sign up with AT&T's MediaNet Max plan. Since it is NOT a Cingular 8525 phone "officially" supported by AT&T, I suspect the settings to access MediaNet and Cingular Video could be different, and if I call AT&T, they will not help because I am not using the phone they support. Could anybody help with the settings, or is there already a link (I searched and did not find it)? Thanks!
jcc266 said:
I just got this X01HT(Hermes200) with WM6 (Schap's 3.30c ROM) from eBay, and I am new to this forum. I am thinking to sign up with AT&T's MediaNet Max plan. Since it is NOT a Cingular 8525 phone "officially" supported by AT&T, I suspect the settings to access MediaNet and Cingular Video could be different, and if I call AT&T, they will not help because I am not using the phone they support. Could anybody help with the settings, or is there already a link (I searched and did not find it)? Thanks!
Click to expand...
Click to collapse
Welcome on board
You may find the two links following of use:
https://supportcingular.atgnow.com/cng/search.do?category=%2FTopics%2FOrange%2FAll+Topics&universe=cingular&searchText=Verify+Connection+Settings+on+the+Cingular+8525+for+MEdia+Net+Access&searchBt.x=20&searchBt.y=5
http://forum.xda-developers.com/showpost.php?p=1063528&postcount=34
Mike
Thanks Mike for the links. But they are for Cingular (AT&T) 8525 which AT&T supports (meaning with Media Net URL already coded in the Today screen and in the AT&T ROM ? etc.) , and mine is X01HT with a non-AT&T ROM. I copied Cingular Video's URL from my son's AT&T-supported phone onto the PIE Address Bar on my X01HT, and the return error message said "CV is only available on supported 3G phones." But I know for a fact that my X01HT is a 3G phone...
Trying to follow the instructions on the second link, I did not even have Media Net on the "Select Networks" list so I could not go any further. I must be missing something and obviously a hopeless newbie. Perhaps some links specifically for using X01HT(Hermes200) with AT&T's Media Net would help to propel me into the wonderful world of MediaNetitng...
There are all different way to use the X01HT on AT&T network. If you don't mind use WM5, the esaliest way is to just DL the latest rom for AT&T - http://www.america.htc.com/support/8525/software-downloads.html.
If you want WM6, then you have to setup the MediaNet connection manuelly.
http://hsc.asia.htc.com/e-club/download/rom_code_hkg_eng.aspx
1st
Setting-> Connection-> GPRS Setting -> pick "CHAP"
2nd
Setting-> Connection-> Connectiokn-> New Network-> add-> type "Media Net" for name, pick " GPRS,3G " for line->Access Pt. type" wap.cingular"-> user name type " [email protected]" -> pw type" cingular1"
also check out here http://wiki.xda-developers.com/index.php?pagename=Hermes_provider_cabs
Hi maximuz329, thanks for your 3 postings responding to my question. The last one's link really helps. Now I can browse the net with URL typed into the address bar. One more question: what is the URL for Cingular Video for my X01HT(Hermes200), or any other way to access it beside typing-in the URL? Thanks again.
jcc266 said:
Hi maximuz329, thanks for your 3 postings responding to my question. The last one's link really helps. Now I can browse the net with URL typed into the address bar. One more question: what is the URL for Cingular Video for my X01HT(Hermes200), or any other way to access it beside typing-in the URL? Thanks again.
Click to expand...
Click to collapse
For cingular video..you need to make sure your proxy setting are correct. However I would recommend that you flash your phone with vpg's rom...and all will work for you :
http://forum.xda-developers.com/showthread.php?t=317952
Get the lastest one from vp3G... the 3.60 version
http://forum.xda-developers.com/showpost.php?p=1360192&postcount=1 for MediaNet setup on any WM5 or WM6
AT&T MMS Config Web site
Here is the link to AT&T's Online Help. It refers to the Fuze but the settings are the same for us.
http://www.wireless.att.com/support...ory=Picture/Video+Messaging&tutorialId=700300
OK, i have big problems with my MMS. My media net works perfent, the internet and Internet sharing, but i cant send MMS. It starts to send and then a warning that cano't send the massage. Tha text masseging works good, i have try installing different ROM'S and the problem paesist. Can some one help me please, Thanks
I have try all posible and logical thing, please no simple and very logical things.