Related
i want update radio update but its locked at %10 then i restarted
and i want to enter bootloader but nothing come to screen. no power no bootloader!
how can i solve this problem...
albetratz said:
i want update radio update but its locked at %10 then i restarted
and i want to enter bootloader but nothing come to screen. no power no bootloader!
how can i solve this problem...
Click to expand...
Click to collapse
You should have read the instructions before trying the upgrade. ROM upgrade goes first, then the radio stack. I don't know if there's something you can do yourself to fix your device, or if you need to have it reflashed by your supplier. Anyone else?
bamse said:
albetratz said:
i want update radio update but its locked at %10 then i restarted
and i want to enter bootloader but nothing come to screen. no power no bootloader!
how can i solve this problem...
Click to expand...
Click to collapse
You should have read the instructions before trying the upgrade. ROM upgrade goes first, then the radio stack. I don't know if there's something you can do yourself to fix your device, or if you need to have it reflashed by your supplier. Anyone else?
Click to expand...
Click to collapse
Hi,
Seems like you are another of the many victims who got problems
after trying to upgrading new ROM & Raidio stack. Hope you still
got that warrant and get it replaced with a new one. Otherwise
you might have to try what some crazy guys do here trying to fix
it by doing all sort of bootloader etc.. Hope those who are trying
to get the upgrade ROM and Radio stack be very careful and make
sure your device are from the same supplier or distributor where
you got the new upgrade. Otherwise it will be screwed. Dont learn
your lesson the hard way.
same problem here.
i've got the O2 NL XDA
downloaded the 3.15 and radio updates from O2 NL website
installed updates as per instructions
1st update went without a hitch
2nd update totally screwed my xda.
now it takes a long time to start up, and when it does it just displays a white screen with a blue taskbar.
tried the bootloader way of flashing the rom, but still no luck
luckily I can send it back in to O2 to have it fixed.
I may try to do it by backup up another XDA, and reflashing mine.
Same prob with me..
I've got exactly the same problem. I downloaded the Rom update 3.15 and the new radio update. First I installed teh Rom update and after a hard reset I "installed" the radio update.
While updating the XDA hang and I waited for about ten minutes to see if the XDA was really hanging. I gave the XDA a hard reset but then the XDA didn't work anymore (white screen and blue bar on top).
I can still access the bootloader. I installed a Rom from a XDA which still works. Still no difference. When I tried to write the Radio rom to a sd-card I got that message that I have to connect one or another RS cable.
The XDA still doesn't work anymore. I have contacted O2 but they told me that they couldn't help me because they can't find my IMEI number in their system. I contacted the company where we ordered all the XDA's but I still don't have an answer.
Thank you O2 for being so nice with not helping me out with my one week old XDA without any scratch. I hope my XDA could be replaced as soon as possible since the XDA will not sold anymore when O2 changes to Telfort !
If you can make the ROM update work, you should be able to install the corresponding radio as well.
Try this:
1. Make sure you have the latest version of ActiveSync (=3.6)
2. Make sure the battery is fully loaded.
3. Extract the ROM update and Radio update to different folders.
3. Connect the cradle to AC-adapter and computer.
4. Put the device in the cradle and make sure it connects to ActiveSync.
5. Run the ROM installation application. Should take 5-6 minutes.
6. Run the radio installation. IMPORTANT: When you are prompted to remove power supply, pull the power plug from the cradle. If you do not disconnect power, the update will fail. I think this update took a little more time than the ROM update, and the device may seem "dead" for a while.
Good luck!
Hy Guys.
Are there any news about the problem flashing the XDA?
Tried last night to update my XDA to the last Qtek-Versions (ROM 3.16.52.....)
ROM Update works fine, but after the RSU Update the phone didn't work any more.
Have the same white screen with the blue taskbar and the little keyboardicaon down the right side.
Entering Bootloader mode there comes the Error Message "GSM Error"
Nice screen is the qtek "Booting Screen".
It shows
G <empty>
R <empty>
3.16.52
Hope there are any other hints to resolv this problem.
Have anyone got some experiences with sending it back to O2 with an "unoffical" Softwareversion?
Or is there any posibility to change the ROM Version to an old (original) O2-RomVErsion?
Thanks for any help....
Regards
Stefan
Hi Stefan,
I would suggest to try upgrade you device with any XDA ROM version by bootloader's CE to SD backup/restore and after try again to upgrade RUU by PC.
I know that upgrading/degrading by bootloader is the more safety way to do it.
Regards,
Riccardo
Riccardo said:
Hi Stefan,
I would suggest to try upgrade you device with any XDA ROM version by bootloader's CE to SD backup/restore and after try again to upgrade RUU by PC.
I know that upgrading/degrading by bootloader is the more safety way to do it.
Click to expand...
Click to collapse
SD-Card Writer just orderd
But I don´t know if it will work. Since the Bootloader says GSM Error, I think there will be no other posibility to restore it.
Let´s wait for some days, hope and we will see.....
Stefan
Hi everybody
Yesterday i had a problem trying to upgrade my wallaby to radiostack 6.18 tu RSU 6.24.
When i was doing the upgrade with the rsu files and the upgrade was in 88% in the screen appears:
" Upgrade problem, please reset" (something like that :? )
When i did the reset i got the boot screen and in the corner only i get the ROM version. The radio stack dissapears and then im not able to have my wallaby works.
Then i get into the wallaby bootloader version 5.15 and i got the following message:
GSM-ERROR
I reset the device a lot of times and nothing. i think " god i lost mi phone"
and then reading posts and posts i solve the problem in this way:
1:- I cook a rom image in an sd card using Xtools and a card reader instaled in your pc.
2.- when you finish insert the sd card with the image, enter again bootloader by holding On/Off and doing a soft reset
3.- Bootloader should tell you something that OS is detected on your SD-Card
4.- Press Action Key to install the ROM
5.-After finishing do a hard reset
Now your ROM should be installed on your device.
6.- turn off your device, maybe you will have to press the power button several times.
7.- Remove your SIM card
8.- Turn on your device, wait about 15 minutes and you can see that the device goes out off that frezze screen and gets into the align screen setup.
9. When you get the TODAY screen connect your device in the cradle and make a new asociation for your device
10. get into the windows file with the explorer of activesync on your pc and copy the 4 radio stack files in the windows file of your deviceq and the .exe file in the \Windows\StartUp folder of your device.
11. Restart the device and the upgrade will begins automaticaly in the back ground
12. when it sucsesfully done, do a soft reset and you must have your radio stack upgrade done and your wallaby completly recovered.
13.- Insert your SIM card again and enjoy
I hope this guide will help you
Rememeber to copy the correct radio stack in your device, i used the RSU 6.24 because i have a PW10B1 wallaby. check your version in the label in the rear part off your device
[/b]
if this tip results succesfully to someone please let me know. thanks
Well done, not many people manage to repair corrupt/missing radio stack, thanks for the details also, it may help resurrect other dead Wallabys.
which RSU to use
hi,
mine is PW10A1 so which RSU to use
Re: which RSU to use
maddawood said:
hi,
mine is PW10A1 so which RSU to use
Click to expand...
Click to collapse
ftp://[email protected]/Wallaby/Radio_Stack/RSU_V4.16_PPC.zip
HTH
Stefan
which rom you used?
Re: which RSU to use
LumpiStefan said:
maddawood said:
hi,
mine is PW10A1 so which RSU to use
Click to expand...
Click to collapse
ftp://[email protected]/Wallaby/Radio_Stack/RSU_V4.16_PPC.zip
HTH
Stefan
Click to expand...
Click to collapse
That link isn't working at the moment - I could sure use it
Link should be:
ftp://xda:[email protected]/Wallaby/Radio_Stack/RSU_V4.16_PPC.zip
Stefan
Thanks Stefan - I saw elsewhere what the password was, and noticed it was missing from the URL. I got the RSU file and have finally managed to get it on to the XDA, but still fails every time it restarts... the old 1% problem... Do you know if it is easier to update the radio stack from an SD card? The XDA is running the special edition ROM, which has at least given me back some control of the device.
Thanks in anticipation
Phil
PhilHirons said:
Thanks Stefan - I saw elsewhere what the password was, and noticed it was missing from the URL. I got the RSU file and have finally managed to get it on to the XDA, but still fails every time it restarts... the old 1% problem... Do you know if it is easier to update the radio stack from an SD card? The XDA is running the special edition ROM, which has at least given me back some control of the device.
Thanks in anticipation
Phil
Click to expand...
Click to collapse
I have the same problem, every time my device restarts, and stop at 1%. So I am wondering if Stefan can help us to give us solution in this case.
Worth the risk?
After reading this ordeal, is it worth the risk to upgrade a working radio stack? Does the telephone work substantially better after the upgrade?
Try other RSU's
kinowong said:
PhilHirons said:
Thanks Stefan - I saw elsewhere what the password was, and noticed it was missing from the URL. I got the RSU file and have finally managed to get it on to the XDA, but still fails every time it restarts... the old 1% problem... Do you know if it is easier to update the radio stack from an SD card? The XDA is running the special edition ROM, which has at least given me back some control of the device.
Thanks in anticipation
Phil
Click to expand...
Click to collapse
I have the same problem, every time my device restarts, and stop at 1%. So I am wondering if Stefan can help us to give us solution in this case.
Click to expand...
Click to collapse
Hi, have you tried using other RSU versions? I had the same problem too (1% fail) using 4.16. After giving up on the 4.16, I tried RSU 4.21 (exe). One shot and I was able to re-flash my RSU. What I did differently was to remove the AC power while doing the RSU upgrade (the exe file prompted me). Hope you get your wallaby up and running again.
I try alot of times but it stop at 1% - full batery got the same result.
help.
Re: Try other RSU's
Thank you for your help. I have tried many vensions of RSU, such as 4.16, 4.21, 6.24, 6.25, etc. But all of them showed 1% mistake.
morph751 said:
kinowong said:
PhilHirons said:
Thanks Stefan - I saw elsewhere what the password was, and noticed it was missing from the URL. I got the RSU file and have finally managed to get it on to the XDA, but still fails every time it restarts... the old 1% problem... Do you know if it is easier to update the radio stack from an SD card? The XDA is running the special edition ROM, which has at least given me back some control of the device.
Thanks in anticipation
Phil
Click to expand...
Click to collapse
I have the same problem, every time my device restarts, and stop at 1%. So I am wondering if Stefan can help us to give us solution in this case.
Click to expand...
Click to collapse
Hi, have you tried using other RSU versions? I had the same problem too (1% fail) using 4.16. After giving up on the 4.16, I tried RSU 4.21 (exe). One shot and I was able to re-flash my RSU. What I did differently was to remove the AC power while doing the RSU upgrade (the exe file prompted me). Hope you get your wallaby up and running again.
Click to expand...
Click to collapse
Re: which RSU to use
LumpiStefan said:
maddawood said:
hi,
mine is PW10A1 so which RSU to use
Click to expand...
Click to collapse
ftp://[email protected]/Wallaby/Radio_Stack/RSU_V4.16_PPC.zip
HTH
Stefan
Click to expand...
Click to collapse
Hi guys i have a pw10a1 too, and my radio version is 4.21, i really think it sucks. so is it a good idea to downgrade to 4.16??? or will it only be made worse. or can i use the 6.25.02 version? or is that for another phone type.. PWIEW srry for all the questions .. if 1 is awnsered. i'm happy
--------------------------------------------------------------------------------
Hello,
i am having a frustrating problrems with my p3600
- the phone is not working ! it show that there is no singal and i can't get to the phone seetings
- i tried hard reset / soft reset / upgraded to wm6 , no difference
- tried to flash the radio , but it stops at 0% , and after one hour , it is still 0%?
please help!
Try updating to WM6 with this package:
Apoc said:
jesus, use this: http://rapidshare.com/files/2987211...y_WM6_v2.0.0.4_incl_HSPL___Radio1.41.0.11.exe
created a self-extracting archive so that you only need windows to do the upgrade(no 7zip or winrar), it should extract to a temporary folder and execute the updater, it will flash the hardspl, radio 1.41.0.11, and lsvw's 2.0.0.4.
Click to expand...
Click to collapse
Like it says, it's a total upgrade package which will also upgrade the radio, using harspl, so CID shouldn't be a problem...
Just connect to ActiveSync (preferably as a guest) and start the .exe you've just downloaded. It'll push SSPL by Des (modified bootloader) to the phone, execute it and start updating.
Let me know if this worked...
Did the upgrade and still not working ......
?
Time for a warranty repair!
Your symptoms stongly suggest a hardware fault with the Qualcomm radio chip.
Updating to the WM6 ROM's doesn't update the Radio, so you could try flashing just a Radio ROM (though by your 1st post you've already tried that?)
The instructions for LSVW and Mun-rus both state that the radio should be updated prior to applying the WM6 ROM itself.
osamanet said:
Did the upgrade and still not working ......
?
Click to expand...
Click to collapse
But did the whole upgrade process finish all well...? Is radio 1.41 installed now?
It's a bummer you still have problems, but just exclaming it's not working doesn't really help... Can you be a bit more specific please???
What went well, and what didn't, and what is the exact problem that has risen or didn't get solved? Did you get any specific error-messages? Are you in a good-coverage area? Etc,etc...
NeilM said:
Updating to the WM6 ROM's doesn't update the Radio....
Click to expand...
Click to collapse
Yes it does....the package i linked before does flash radio 1.41.
Moaske said:
Yes it does....the package i linked before does flash radio 1.41.
Click to expand...
Click to collapse
Ah- missed the significance of that one! Thanks
Problem is that this topic is split in 2 forums, so some info not consistent- his answers in the other thread stongly suggest hardware failure.
Hello,
thank you for answering
i did try all the updates in this forum , SAME PROBLEM !
when i press the green button nothing happins , when i go to Phone nothing happiens , when i go to phone settings , also nothing happiens
it used to work before , but it used to disconnect every hour or two , then it stopped working
is the device coverd by warranty in the U.S ? i bought it from eBay less than three months ago
I've no idea if it is likely to be covered- was it a new device, fully boxed?
If so, there should be an international warranty card inside, but I don't know HTC's policy on coverage in USA.
HTC's USA Home Page doesn't mention this model at all.
hey guys.. i need some help
i installed an app an asked me to restart the device.. i did
and now it's stuck on the splash screen
IPL 2.27
SPL 2.27
GSM 02.44.11
OS 2.27.1.1
and the orange brand wallpaper
what can i do? i tried to reset it and format it
but an error shows up
"Press Send to restore factory default,
Other keys to quit"
ok.. send it is
"Format FAT Partition
Format failed"
i can enter RGB bootloader (cam button+power), but i don't know what i can do??
ps: i just got it from a friend, i don't think my phone is cid-unlocked..
and i'm stuck at the splash screen and nothing to do
please help me.. tell me what can i do
Ouch.
Sounds like the built-in flash memory is bad. I'm not sure what you can do about that, short of replacing it.
No offense Reverend, but where did you hear that? Its just bad flash man! Simply enter the bootloader mode, and re-flash a new rom to your device. What program where you trying to install?
ashasaur said:
Its just bad flash man! Simply enter the bootloader mode, and re-flash a new rom to your device. What program where you trying to install?
Click to expand...
Click to collapse
something from a pocket freeware site.. "XDA-Team_Manilla2D.CAB"
it's a touchflo 2d app for today screen.. after installing it, the sistem wouldn't boot up anymore. so i tried to format, soft reset, to restore the system..
the formatting started and then gave an error and shut down immediately. i didn't even catch a glimps of that error 'cause it restarted.. and then the problem. it won't go past the operator splash screen
tried to reformat.. would't start.. format failure
..simply wow.. don't get me wrong , but i didn't knew there was a bootloader screen until this happened.. i dug up about this problem on the forum, but i can't solve it.. i don't know that much about flashing.. isn't the wizard supposed to be cid-unlocked to be able to flash it with a new rom?
or there's a rom that doesn't require the pda to be unlocked?.. cause' i think mine isn't. and, since i can't get it to boot up the os, i can't cid-unlock it after the tutorials i've found here..
and i don't want to bury it, yet
Oh you poor sole...that program that you tried to flash is notorious...I did the very same thing to mine just the other day. It doesnt work with the Wizard yet for some reason.
Now, onto your problem, yes-I think that your Wizard IS INDEED CID locked, and if that is the case, search for the Wizard LOVE ROM and flash it. It can be flashed with a CID unlocked device. Head into your bootloader mode, then start up the RUU flashing program on your PC that is included with the ROM. After it flashes, you can use the Wizard Service Tool, which is also availible via searching to CID and SIM unlock your device, and then you can put any ROM that you like onto it. I hope that helps somewhat!
If you can get it into bootloader mode, you can recover. If the phone is not unlocked, you will have to load the original service ROM for that phone.
You MIGHT get lucky by just flashing the IPL/SPL back though, now that I think about it...look at the "How to Remove HardSPL" thread for the most popular IPL/SPL sets. If this works, you won't have to put all of your custom settings and programs back on.
Myrddin Wyllt
Plz note all the IP/SPL posted in the thread 'How To Remove HardSPL' are for G4 devices and they are not meant to be flashed to a G3 device,if flashed will certainly 'Brick' the G3 device.
Whereas,here ,he has a G3 device with IPL/SPL 2.27,flashing those IPL/SPL (Bootloaders) means instant death of the phone.
koolariz
Simply,download the official stock rom of the carrier and flash it in Bootloader mode to recover back to its default status,than downgrade to IPL/SPL 1.xx to CID unlock the phone,how to CID unlock the phone, read and follow this guide carefully :-
http://wiki.xda-developers.com/index.php?pagename=Wizard Windows Mobile 6 for newbies
zabardast_1 said:
koolariz
Simply,download the official stock rom of the carrier and flash it in Bootloader mode to recover back to its default status
Click to expand...
Click to collapse
i can't find anywhere the original one.. my wizard is in orange.ro carrier [orange spv m3000].. i tried on varios romanian discussion site's but only found radio rom's i'll keep searching...
any ideea what other kind might work with cid-locked?
i found this one on xda ftp:
Orange_SPV_M3000-FRA
Orange SPV M3000 ROM update 2.18.1.3
on ftp://[email protected]/Wizard/Roms/Orange/
If it is truth....
koolariz said:
i can't find anywhere the original one.. my wizard is in orange.ro carrier [orange spv m3000].. i tried on varios romanian discussion site's but only found radio rom's i'll keep searching...
any ideea what other kind might work with cid-locked?
i found this one on xda ftp:
Orange_SPV_M3000-FRA
Orange SPV M3000 ROM update 2.18.1.3
on ftp://[email protected]/Wizard/Roms/Orange/
Click to expand...
Click to collapse
If you have said the truth... you've got a G3 device cause your ipl spl are 2.27.
So try to install this original ROM... is for Tmobile WWE so try it.... http://rapidshare.com/files/38880130/ruu_prodigy_226102_22610105_022511_tmous_wwe_ship.exe.html
Or search on tutorials tu unlock and upgrade the wizard Love ok?
Good luck men...
And please please please read and ask before do anything, BTW now the only you can do is to runn this ROMs cause you cant get your original carriers ROM.
If this dont works... please read the thread from upgrading forum in this wizard subforum that said something like Stuck on splash screen solution DYI or something the tuttorial DEV is called Drug_store.
zabardast_1 said:
Myrddin Wyllt
Plz note all the IP/SPL posted in the thread 'How To Remove HardSPL' are for G4 devices and they are not meant to be flashed to a G3 device,if flashed will certainly 'Brick' the G3 device.
Whereas,here ,he has a G3 device with IPL/SPL 2.27,flashing those IPL/SPL (Bootloaders) means instant death of the phone.
Click to expand...
Click to collapse
Good catch. Sorry about that!
Myrddin Wyllt said:
Good catch. Sorry about that!
Click to expand...
Click to collapse
Nah! buddy,you are doing fine,its just we sometime overlook the post,it happens to all of us,so no harm done !
koolariz said:
i can't find anywhere the original one.. my wizard is in orange.ro carrier [orange spv m3000].. i tried on varios romanian discussion site's but only found radio rom's i'll keep searching...
any ideea what other kind might work with cid-locked?
i found this one on xda ftp:
Orange_SPV_M3000-FRA
Orange SPV M3000 ROM update 2.18.1.3
on ftp://[email protected]/Wizard/Roms/Orange/
Click to expand...
Click to collapse
YES ! you can try this rom or download the WWE (English) version of Orange SPV M3000 Official WM5 Rom from here :
http://www.megaupload.com/?d=5OZEILXK
zabardast_1 said:
YES ! you can try this rom or download the WWE (English) version of Orange SPV M3000 Official WM5 Rom from here :
http://www.megaupload.com/?d=5OZEILXK
Click to expand...
Click to collapse
10x a lot.. i hope it won't die on me..
LE:
i tried the O2 rom [12.18.3.103] u gave me. it doesn't start flashing.. 0% and then
quoting:ERROR "This NBF file cannot be used for your PDA phone. Please get newer NBF file."
ps: The orange one on the xda ftp server doesn't work .. it's archived and parts are missing..
Hmmm,ok,lets try this out,download 'Button's Rom 1.05' from the link posted below and check if this works out.
Otherwise,you'll have to look for official Stock Rom (Romanian),which was running on the phone before.
http://wiki.xda-developers.com/index...0for newbies
i'll try this one.. for now.. ps:your link is broken?
i just have another question.. i have a friend with the same wizard as mine, i mean in the same carrier.. is it possible cu get his rom? to dump it on SD card.. or something?
so that i may flash that rom?
LE:
i found another thing on a DIY
If you got IPL/SPL 1.xx go to G3.3. If you got 2.xx go to G3.4
G3.3 Download button rom and flash it to your device. Your device should startup again after doing this. Go to G3.5.
G3.4 Download wizard_love rom and flash it to your device. Your device should startup again after doing this. Go to G3.5.
Click to expand...
Click to collapse
should i try the wizard_love rom?
ok,download Button's Rom 1.05 from here:-
http://rapidshare.com/files/18212239/CUSTOM__RUU_Wizard_1050412_WWE_101_11210_WWE.exe.html
also try this one :-
xda_miniS_LaunchRom
http://rapidshare.com/files/43423464/Xda_MiniS_LaunchROM_v154102.exe
and yes! you can also try Wizard_Love _Rom.
Now,its possible to back up the rom from your friend's phone,but it also have to be CID unlocked first and your device shud also be CID unlocked to flash it from the sdcard (MTTY) method.
pfff (
i've updated the rom with the Wizard_Love_2.26.10.2_WWE_Novii_CF2 and now i have a blue sci-fi splash screen with "AKU 2.3" in the top-right corner..
IPL 2.27
SPL 2.27
GSM 02.25.11
OS 2.26.10.2
same ****
won't boot up
and if i try to format, same error.. Format Failed.. so here i am again
hmmmm,try a Hard Reset,hope it works or try other roms I have posted above.
Do you have any sdcard inserted in the phone right now,take it out before flashing any rom.
koolariz said:
won't boot up
and if i try to format, same error.. Format Failed.. so here i am again
Click to expand...
Click to collapse
dude.. that's what i've been trying hard reseting it.. and i get the same error each time i try it "Format Failed"
no sd inserted.. i took it out a while ago.. cause i read on the forum to flash without it.
i begining to get desperate over here
i'll try other roms..
what else can i do than hope this works
Also take out if any sdcard or mini sd is inserted in the phone before flashing,it also causes this Format Failed problem.
I hope someone here can help me to make my LEO work again.
Im having huge problems with my HD2 after flashing a ROM with Extendir. While setting up the device with Preset Installer my PDA went to deep sleep and failed installing all cabs.
After reboot it hung on the screen where Radio Version etc. is shown. That is why i made another Hard Reset. That let my phone boot again but after initial setup it hangs again at that place.
I tried another ROM and experienced the same problem. After that i went back to shiped with spl and radio. Not even that fixed the problem.
I tried MTTY with task 29 and reflash stock. It stays the same! After initial setup my phone sometimes hangs before or after boot animation. sometimes it boots till sense is started and hangs there.
Does anyone have a smart idea how i can make my leo run propper again?
Thanks for help.
edit: im not sure if its Extendir. It could be something else, too. I tried flashing via usb and storage card.
Ultimaex said:
I hope someone here can help me to make my LEO work again.
Im having huge problems with my HD2 after flashing a ROM with Extendir. While setting up the device with Preset Installer my PDA went to deep sleep and failed installing all cabs.
After reboot it hung on the screen where Radio Version etc. is shown. That is why i made another Hard Reset. That let my phone boot again but after initial setup it hangs again at that place.
I tried another ROM and experienced the same problem. After that i went back to shiped with spl and radio. Not even that fixed the problem.
I tried MTTY with task 29 and reflash stock. It stays the same! After initial setup my phone sometimes hangs before or after boot animation. sometimes it boots till sense is started and hangs there.
Does anyone have a smart idea how i can make my leo run propper again?
Thanks for help.
edit: im not sure if its Extendir. It could be something else, too. I tried flashing via usb and storage card.
Click to expand...
Click to collapse
to specify that rom you used in this moment and to specify that RADIo is used
I used the Lost in Asia Regular Version V0.8 and Radio 2.08.50.05 and HSPL.
At the moment i have a lover Radio version.
Ultimaex said:
I used the Lost in Asia Regular Version V0.8 and Radio 2.08.50.05 and HSPL.
At the moment i have a lover Radio version.
Click to expand...
Click to collapse
to assess that rom V.0.8 it has rom 2.0x base
radio 2,08 to enable 576 MB
the rom that it uses, it could not be compatible with the version radius
try to chnge a version radio or try to change version rom
if you use radio 2.08 from rom 2.07,try to flash rom cooked with 576 Mb enable
sorry for my poor english,i'm Italian
Sorry mate
the problem is other
I have since the rom of bob qualified V.08 is for 576 mb
You tried booting up with the SD card taken out of the device?
WB
You need to have a radio that supports the 576 mb. But I don't think this is your problem. It sound like to me your storage card is the problem. If you have another storage card format it to FAT 32 and try again. I bet your problem is solved. Also Don't use a 16gb card until you know for sure it is working. Even then there are problem with some people using them.
I dont have a Storage Card inserted now. Still the same problem
Btw. Using Laurentius V1.2 now. Same error here. i try to flash a lower Radio now.
As i said before i flashed stock 1.66 via storage card with radio and spl and still had the same Problem.
Ultimaex said:
I dont have a Storage Card inserted now. Still the same problem
Btw. Using Laurentius V1.2 now. Same error here. i try to flash a lower Radio now.
As i said before i flashed stock 1.66 via storage card with radio and spl and still had the same Problem.
Click to expand...
Click to collapse
have you try flash rom with activeSync???
Are you able to flash HSPL again? Can you confirm on the Tri Color screen it says HSPL 1.42?
bobsbbq said:
Are you able to flash HSPL again? Can you confirm on the Tri Color screen it says HSPL 1.42?
Click to expand...
Click to collapse
Everything flashes as usual. HSPL, Radio and ROMs. The software just isnt running stable after flash.
If it would be a Radio/SPL/ROM problem the stock rom should fix it.
Not wanting to be the one to say it but maybe your device is defective or damaged. Or maybe the problem was caused ny the failure going to sleep, but I don't think so. I have accidentally unplugged mine before during flash and still got it back. If you reflash the ROM it should work again. If you don't have any luck I would flash back to the Stock ROM and take it in for repair.
To bad noone can help. I will do some research and if i have no success i will send it back.
Some weeks of waiting
bobsbbq said:
Also Don't use a 16gb card until you know for sure it is working. Even then there are problem with some people using them.
Click to expand...
Click to collapse
Any sources for that?
I never read anything backing this up.
pathologo said:
Any sources for that?
I never read anything backing this up.
Click to expand...
Click to collapse
Yes there have been many. There have been some in my threads. There is also a thread posted here with lots of discussions and it was determined the the lock ups and freezes with Manila 19222911 was the 16gb cards. It seems there was only one ROM that did not have the problem and unfortunately this cook doesn't share with others.
im making improvements. after flashing stock i found out that i can change more and more settings and install programs without the need to hard reset. when i damage the filesystem with a program or setting i hardreset the device. after restart i can install that program without problems and can try another one.
seems that my device is repairing magically
Ultimaex said:
im making improvements. after flashing stock i found out that i can change more and more settings and install programs without the need to hard reset. when i damage the filesystem with a program or setting i hardreset the device. after restart i can install that program without problems and can try another one.
seems that my device is repairing magically
Click to expand...
Click to collapse
So the stock ROM is working then.
Ultimaex said:
im making improvements. after flashing stock i found out that i can change more and more settings and install programs without the need to hard reset. when i damage the filesystem with a program or setting i hardreset the device. after restart i can install that program without problems and can try another one.
seems that my device is repairing magically
Click to expand...
Click to collapse
try using the energy Rom...it works for me...all i can say, it's more stable than any other roms that i use before....
bobsbbq said:
So the stock ROM is working then.
Click to expand...
Click to collapse
I think you didn't understand. after EACH program or setting i need to hardreset.
after hardreset i can install that program as usual as all programs i did that with before.
sseems that i 'gain' more and more storage back.
Ultimaex said:
I think you didn't understand. after EACH program or setting i need to hardreset.
after hardreset i can install that program as usual as all programs i did that with before.
sseems that i 'gain' more and more storage back.
Click to expand...
Click to collapse
I guess I don't understand. You have to have a working ROM to install a program? For a stock ROM you should not have to install anything. It either works or it doesn't.