:wink: :lol:
Please , can you tell me , step by step , how to set POP and SMTP
settings on T-Mobil Pocket PC Phone .
:?: :?: :?:
From Inbox, services/new service. Enter your full address. Hit next, it will try autoconfig and probably fail, hit next. Enter your real name. Enter mail username just like in your desktop software. Enter password. Tap next. Select service type, POP or IMAP. Give the connection a name (whatever you want to call it). Next. Enter the name of the servers for incoming and outgoing. Incoming is your POP/IMAP server name, typically mail.domain. Outgoing can be the T-Mobile server (myemail.t-mobile.com), or your own if it allows authentication for SMTP. If authenticating SMTP, tap the options button and turn on the authentication checkbox. The rest of the settings are your own preference.
Related
I have had no trouble sending and receiving e-mail when I am connected to the servers of my ISP. That is, dial-in ISP, to which I connect via cell phone, where the pop server and the smtp server belong to the ISP where I also have my e-mail account.
The moment I connect via GPRS, all I can do is download my e-mail. When I try to send, I get all sorts of error messages stating that the servers could not resolve the recipients' names. Is there a way around this? :?: Do I need to specify a proxy. How does anyone else connect via GPS and send e-mail from their regular ISP POP account?
i have the same problem
so far i've used the workaround which is
that my isp (which is not my cellphone gprs isp but my cable isp)
have a www mail gateway so i can use IE to login to that and send my mails that way
Yeah! I do that, but when I reach the web mail page and try to click open an e-mail, nothing happens. So that is a dead end for me! There has to be a way around the SMTP issue. We'll figure it out!
Hi
Are you using the smtp address of your pop3 provider or your gprs provider?
My xda ii is connected via an orange uk sim and i use it to both send and receive email from my o2 and blueyonder accounts. In order to send from these accounts i have to use the smtp address of orange ie smtp.orange.net rather than the smtp addresses of my pop3 providers.
Hope this helps
Chris
Indeed it would help if I only had a means to find out the smtp server for my cell phone service provider. Believe me, I've tried and no one ate Telecom Italia Mobile (TIM) has a clue as to what I am talking about. I tried smtp.tim.br and smtp.tim.com.br but neither worked
Any clues...?
try something like relay.tim.it or they should have some data support.
According to an NSLOOKUP against their domain name, their primary mailserver is smtp1.tim.com.br - try that.
Fork.
Hi everyone!
Fidlling with the smtp settings, I finally found out how to send mail over a GPRS connection using your ISP's pop mail account.
Everyboy, when set up an account, must fill in the pop.ispserver.com and the smtp.ispserver.com. It so happens that using the GPRS smtp (those who have one) or using pop relay, is trcky and does NOT work! The solution is:
1. Goto Inbox
1.1. Select Accounts
2. Select the account you want to edit (presumably the account you been able to download e-mail but didn`t allow you to send e-mail)
3. Enter you POP mail e-mail address (step 1/4)
4. Enter user info (name, user and password) (step 2/4)
5. Enter account info (type is POP3 and name will be grayed) (step 3/4)
6. Server Information (step 4/4) critical step
- fill in your pop account info (pop.ispserver.com)
- fill in your smtp account info (smtp.ispserver.com)
- leave domain blank!
6.1. Click Options and don`t check anything! Goto step 2/3
6.2. Select (checkmark) outgoing e-mail server requires authentication
- Do NOT check Require SSL connection
- Select Only display messages from the last X days, if you want
Click NEXT and you are good to go!!!
It worked fine for me with TIM in Brazil and Cingular in the US! Some POP3 services don`t allow this kind of connection!
Hey every1
can someone please explain how to set up Push Email.
Is they a seperate software to set up if so where is it I cannot find it on my Qtek 9000.
Please can someone explain it to me.
Thank You
Gigino
I dont really have or know what Push Email is versus what I have done below, But here is what I have done.
I went to my inbox (for messages) from the Desktop of the XDA
Then in the bottom right go to "MENU" then to "TOOLS" then to "OPTIONS" then click on "NEW ACCOUNT" then
Enter your email address ex: [email protected] - then click "NEXT"
Enter your name, user name, password, and check the "remember" box then click "NEXT"
Then select "POP3" or whatever your mail is. and Name is "Work" or "POP3" etc... then click "NEXT"
then enter your incoming mail - "mail.doe.com" (whatever yours is)
then enter your outgoing mail - "mail.doe.com" (whatever yours is)
then enter the domain - "www.doe.com" (whatever yours is)
then click on "OPTIONS" now you can check the "connect for messages every...." box - you can put any amount of minutes you want in here and it will automatically check for messages every "XX" minutes.
I KNOW this is not "PUSH EMAIL" but it works for me as I do not know what program i would need for push email. (Yes I have searched this site and others)
I have the latest Tmobile NL rom. I am in the USA and have Tmobile. I also pay for the Total Internet so it connects at GPRS through wap.voicestream.com
Push email is part of ActiveSync - and it requires Microsoft Exchange Server 2003 SP2 on the server side.
If you have Small Business Server 2003 the following doc is a good place to start for getting it configured.
http://www.microsoft.com/downloads/...72-1e5a-4128-a30c-dafeeb43544d&displaylang=en
--Richard
On my Prophet I would like to use my Gmail next to my Hotmail account. I've enabled POP in my Gmail account and I tried to set it up on the phone. However, Gmail requires usage of port 995 for pop and 465 for smtp. There is no setting for the port on the Prophet. I tried inputting pop.gmail.com:995 and smtp.gmail.com:465 for the servers but that made no difference (it 'connects' but asks me for my login info while 'loggin on...' and yes I've tried it with and without @gmail.com and retyped my password several times).
Does anybody have a work around? Or.. an option I've missed? Or.. an hack to make it possible to use a different port? Or.. a name of an e-mail application that works on Windows Mobile that provides this feature?
Here, this is the way to set up GMail:
In the Server Information, click Option, and in the "Require SSL connection" box, check/enabled that option. Also, below it, check "outgoing mail requires authentication."
With these two enabled, GMail will work fine.
One last thing, you can only select "Get message header only". If you select get entire mail, once you download your mail to your PPC, you cannot download the mail anymore in your desktop via Pop3.
For Wifi connection, I would recommend you specify larger size of header to download, I use the max 999 KB of message body.
For slower connection like GPRS, I set mine to only download 10 KB of message body.
Hope this helps.
That's weird.. I tried what you propose but as I said it would keeps asking me for my login information? Since those are correct I assumed it was due to the fact that I didnt set the right port number anywhere?
Anything I'm overlooking here then?
Not sure what you miss. I will recommend you just delete that mail box and re-create it again. If it does prompt you for login information, I guess there is a chance you typed the wrong pwd.
But it should work fine. You can use your login without the @gmail.com
Does it work for you? On your Prophet?
Here's what I do @ Outlook E-mail:
* Menu | Tools | New account
* Enter e-mail address: flyingd*[email protected]
* Auto configuration (never goes past Download..) --> Next
* Your name: Full Name
Username: flyingd*tchman [or] flyingd*[email protected]
Password: Password (includes one capital)
* Account type: POP3
Name: gmail
* Incoming mail: pop.gmail.com
Outgoing mail: smtp.gmail.com
Domain:
* Options
Connection: The Internet (= T-Mobile GPRS)
Checked SSL connection
Checked outgoing mail requires authentication
* Finish
Then it goes 'connecting' followed by 'loggin on..' and it keeps asking me for my incoming E-mail username and password?
yes, i just verified my config with yours, line per line.
I have also my password saved there, and limit to 10KB header of message to download over the GPRS link.
Um, this is not a free solution, but you can also use Flexmail 2007, which is an excellent client and supports port changing and everything under the sun.
Does everything under the sun include checking for new e-mail say every minute and reporting new e-mail to the 'today' screen?
It can check for new email every minute.
It doesn't have a Today screen plugin which is one of the main faults of the program, I guess. However, it has the ability to stay minimized in the System tray next to the Wifi icon and it has the ability to notify on each new email so I guess it can tell you when you have new email.
I don't check for my mail every minute and usually use it with my Wifi connection so its perfect for me.
But it can do those things which you mentioned
Hi guys,
Im having a frustrating time trying to get my outlook to send email. I can receive just fine.
Just a note, my computer sends/receives fine and i use the same settings on computer and phone. I never user activsync because ive never been able to get the linux version to work for me.
My server requires authentication however i get this error when i try to send: "The message(s) could not be sent. Check that you have network coverage
and that your account information is correct. Then try sending again."
If i uncheck the option for authentication, the email bounces as it should saying relay is not allowed.
Im using the same settings as my computer, but I just dont see whats wrong. Im a linux user and built my webserver so i feel like i should be able to figure this out which leads me to thing outlook sucks lol
Any suggestions to try?
James
In 'Edit Server Settings' where it has your User name, Password, and Domain how do you have that set up? when i first did mine i set it up with all three, but it didn't work, and what worked for me was setting the username to be [email protected] leaving the Domain field blank -- so that is something to look into, and if it is different maybe try setting it up the other way just putting your email as the username and the domain in the domain field.
How do i find 'Edit Server Settings'?
In my inbox, i click the Menu button bottom right, click tools and options. then i click on the email account i created, which sends me through all the email settings in the following order.
Note: i never used Outlook email as it never let me specify pop or imap so i added New Account.
Email address -- [email protected]
Your name - james
Account display name -- greyed out
incoming server name lwp.ca
account type -- greyed out (its set to imap)
username -- [email protected]
password
outgoing smtp server: lwp.ca
requires authentication checked
use same user name and password for sending mails checked
Automatic send/receive -- set to manual
download messages set to from the past 30 days
message format : html
message download limit: headers only
download attachments: do not download
I am having the same problem with Alltel PPC6800 and I found out (by tethering with my PC) that some of their IP addresses are listed with Spamhaus.
If I keep trying it will eventually go through when the IP Address switches to one not listed.
Hope it helps?
Roger
996turbo said:
I am having the same problem with Alltel PPC6800 and I found out (by tethering with my PC) that some of their IP addresses are listed with Spamhaus.
If I keep trying it will eventually go through when the IP Address switches to one not listed.
Hope it helps?
Roger
Click to expand...
Click to collapse
Ive never tried tethering.. Ive been using the built in wifi or the data service with no luck.. I think its a crippled outlook issue..
Does anyone have suggestions for a free mail client that uses IMAP? If only thunderbird could be used
jemmrich said:
How do i find 'Edit Server Settings'?
In my inbox, i click the Menu button bottom right, click tools and options. then i click on the email account i created, which sends me through all the email settings in the following order.
Note: i never used Outlook email as it never let me specify pop or imap so i added New Account.
Email address -- [email protected]
Your name - james
Account display name -- greyed out
incoming server name lwp.ca
account type -- greyed out (its set to imap)
username -- [email protected]
password
outgoing smtp server: lwp.ca
requires authentication checked
use same user name and password for sending mails checked
Automatic send/receive -- set to manual
download messages set to from the past 30 days
message format : html
message download limit: headers only
download attachments: do not download
Click to expand...
Click to collapse
sorry when you said you use outlook to send i assumed you were using an exchange server -- since you are using IMAP what i said is irrelevant.
When you are at the point where it asks for the outgoing SMTP server, there is a link to 'Advanced Server Settings' at the bottom of the screen. clicking on that will allow you to require SSL for incoming and outgoing -- that would be my only other guess.
but i do find it strange that your incoming and outgoing mail servers are the same and not IMAP.lwp.com and SMTP.lwp.com or something similar.
I can't seem to get my yahoo email accounts to work when I try to set them up on the email app. Any idea what can be wrong or what I can do?
I had this problem as well, it wouldn't automatically set up so I put in the mail servers manually. To do so type in your email and password then select manual setup. Choose IMAP as the option after that and then set the incoming mail server to imap.mail.yahoo.com and then select next and then set the outgoing mail server to smtp.mail.yahoo.com and then select next then go through the rest of the set up and you should be good, worked for me.
Still can't get it to work keeps telling me my password or username is incorrect.
Are you sure that you have switched off any wifi connection on the phone? It will not connect over wifi but over your phone 3g/g connection.