Related
Hi all,
I have a 8125 (Wizard) that I bought used with a broken LCD - I replaced the LCD with hopes of having a functional phone, but I'm not quite there...
It WAS working as a nice little PDA for a while, with the newest Cingular ROM (2.25 I believe). HOwever, I received absolutely NO signal on the radio - the little animation just constantly went like it was forever searching.
So, in my newfound expertise in flashing HTC devices, I decided to flash this to a different ROM. First, I tried the one they call Button 1.05. No bones - it'd drop connection before even going to the tri-color.
Next, I tried the SlimEdition 2.2b of WM6 (I wanted to put WM6 on it anyway, and with this old of a phone, I'm keeping away from excessive gadgets). Same deal as the Button 1.05.
On to the Faria WM6 I found in another forum. This one didn't even find my phone.
Before suggesting I try doing the flashes more than 1 time, I did.. I've been trying to flash this thing for over a month...
Additionally (and probably part of the problem), when I connect the phone to my mini-USB (no, not HTC OEM) it establishes connection about 1/3 of the time....the rest of the time I get a "USB Device not Recognized" warning from XP - I then disconnect it and reconnect it until AS4.5 sees it.
Most recently, I tried putting the Button 1.05 on again, and actually made progress...sorta...
Once I got the RUU running, I actually got it to progress to 2% before the RUU declared a connection failure. Stuck in the RUU screen, I tried all the ROM's I have on this thing, and none get past 2%.
So, NOW, I have an 8125 that's stuck in the RUU screen. I dont know what I can try next, or what might be the problem - however, if anyone knows or has spare parts they're willing to donate to science (I can afford to pay the shipping - that's about it) then I would be most grateful. My initial thoughts are bad USB port or mainboard, but I haven't a clue where to get them.
Alternatively, if I dont hear from anyone soon with good news, I will be offereing for sale 1 hardly used LCD/Digitizer combo for what I paid for it. (approx $45 USD).
Summary (long post, eh?):
1> Can I get out of the tri-color RUU screen, or did it getting to 2% and then dying effectively brick this phone?
2> Anyone have suggestions on what to replace to prevent AS4.5 (or even Windows) from misdetecting the phone when connected via USB?
3> Anyone have parts for above-mentioned repairs/replacements? I'd be most grateful....
TIA!
- M
Follow up - next day (yes, next day)....
Apparently, the Forum Gods were watching over me as I spewed about my flashing issues......
I tried flashing it one more time, using the Slim v2 WM6 ROM....wouldn't ya know, the sunnovabatch worked....
Dunno why or what I did differently, but I dont want anyone pounding their heads trying to find an answer for this....
(I'll still take any donor phones, though...this one is 'better', but still not 'great')
Thanks for lookin!
- M
thats good to hear. say, how hard you think it would be to replace a usb port connector? mine is broken
collwatt said:
thats good to hear. say, how hard you think it would be to replace a usb port connector? mine is broken
Click to expand...
Click to collapse
Well, I've never replaced one myself, but it looks like it's just a few solder joints....
Can anyone confirm this? I dont want to mislead you by saying it's easy, in case it just looks easy, and really isn't.....
Also, I think I saw a thread elsewhere where someone had a bunch of the USB connectors that (s)he was selling....search here first - I'm pretty sure it'll be a better deal than you'll find on fleabay....
GL!!!
- M
Problem just started on my Uni.
SD card will no longer stay in. I can hear the little click (though it doesn't sound as positive as it did) as it goes in, but it doesn't stay there - just springs out.
Anyone ever experienced this before?
Better still, anyone have a fix?
The Uni is useless to me without it.
Thanks.
kryogenik said:
Problem just started on my Uni.
SD card will no longer stay in. I can hear the little click (though it doesn't sound as positive as it did) as it goes in, but it doesn't stay there - just springs out.
Anyone ever experienced this before?
Better still, anyone have a fix?
The Uni is useless to me without it.
Thanks.
Click to expand...
Click to collapse
Maybe you already done this: Have you tried with another sd card?
Still same?
If yes try to see inside to confirm that nothing is broken at simple view
I´m sure someone will come with a wiser sollution
Good luck,
orb3000 said:
Maybe you already done this: Have you tried with another sd card?
Still same?
If yes try to see inside to confirm that nothing is broken at simple view
I´m sure someone will come with a wiser sollution
Good luck,
Click to expand...
Click to collapse
Hi - thanks for the reply. I've found replies are few and far between sometimes..
Yes, I've tried other cards. This latest one (the one I *think* may have broken it) is a legitimate 8GB card bought from a reputable high street store. A waste of damn time anyway because the Uni will only see 4GB of it, depsite doing something to make it see more not long ago (I forget what it was). I Googled the expansion slot problem and found a quick-fix. Add a layer or two of Scotch tape. The card becomes thicker and 'stays' in the slot. It works very well, but it's not my ideal long-term fix.
All that said, my brand new Universal arrived this morning (£60 GBP would you believe..) so I guess now I'll be reading up on how to flash the ROM.
I haven't flashed firmware on a Windows handset since my HTC Canary 7 years ago..
kryogenik said:
Hi - thanks for the reply. I've found replies are few and far between sometimes..
Yes, I've tried other cards. This latest one (the one I *think* may have broken it) is a legitimate 8GB card bought from a reputable high street store. A waste of damn time anyway because the Uni will only see 4GB of it, depsite doing something to make it see more not long ago (I forget what it was). I Googled the expansion slot problem and found a quick-fix. Add a layer or two of Scotch tape. The card becomes thicker and 'stays' in the slot. It works very well, but it's not my ideal long-term fix.
All that said, my brand new Universal arrived this morning (£60 GBP would you believe..) so I guess now I'll be reading up on how to flash the ROM.
I haven't flashed firmware on a Windows handset since my HTC Canary 7 years ago..
Click to expand...
Click to collapse
Well hope you can solve the issue!
Good to hear that you have a new Uni!!
May I know where you´ve got that great deal? and if possible I would like to buy one!
For flashing instructions read here: http://wiki.xda-developers.com/index.php?pagename=Uni_ROM_Upgrade
And personally I recommend you Tomal v.8.5 the fastes and stable 6.1!
Good luck!
Hi again.
It was a UK eBay "Buy It Now" offer.
I was browsing Uni/Exec/SPV etc and refreshing waiting for a particular auction to end when this one just popped up with charger, new battery, leather case and 3 x stylus. It looks/smells brand new. Incredibly lucky I know.
Thanks for the advice on the ROM. I'm just reading through where/how/why and whatnot now. I have a G3 device so I think I can just go ahead and flash.
But as I say, I'm reaqding through the Wiki and the threads. I have seen others mention Tomal's ROM. I'm looking for as Vanilla as possible. This unit for me will ideally run TCMP as best as it can and Vijay's FullScreen along with terminal services. Everything else is a very distinct second priority. I have a Wizard I use for TomTom and a Nokia N95 for an everyday phone. This just needs to be a media player and a remote access unit for my desktop machine. Apart from a file explorer, I could pretty much do without everything else.
Thanks again.
Orb, that Wiki entry needs updating somewhat. There's loads of issues not covered there. The Tomal is a single installer and presumably doesn't need the programs mentioned (though it briefly mentions that at the end). There should be a distinction made there. Some ROM's need these programs, some are single installers, if so ... ... ... ... etc. Not some half-assed brief mention with no other instructions. I presume I just double click the installer in Bootloader and leave it to it???
It says I need to CID/EROM unlock but fails to explain what these are?! More searching shows that it's extended ROM and SIM lock that need removing. What point is there using acronyms for a supposed 'newbie' tutorial..
My unit won't run the EROM program complaining of needing a new NET framework.
This isn't mentioned. Not that you may get this error, what it is, or what you need to do if you do.
The SIM unlock won't run either. Once my unit is in bootloader mode and showing 'serial' I plug in the USB lead and it shows 'USB'. I run the SIM unlocker and it eventually says 'this is not for your device'. More searching and I find I need to be using XP to do this, not Windows 7 or Vista.
Searching about I see loads of people with similar problems. If the Wiki was updated, then when people pointed users to it, then it would do it's job (which is presumably to help people and prevent the forum being full of questions, which it obviously is..).
Looks like I need to get onto an XP machine and do some serious searching through the sometimes 50 page long threads before I risk bricking my Uni.
I'm more than happy to do research if that's what I need to do, but what's the point in promoting a Wiki if you have to ignore half of what it says and find out for yourself anyway?
Not a rant at you by the way. Just a post made from observations.
Cheers.
Hi kryogenik!
I completely agree with you. My Uni came to me from uk with WM6.0, so I supposed it was unlocked and I made various flashes with no fear.
With a friend of mine Uni things were different: it had a stock WM5 and I tried reading wiki to get some answers, but the only thing I obtained was confusion.
I'm really not a newbie on computer systems, and I assure that the wiki has to be freshed out!
Turning back to the wm5 uni, I simply ran the executable from Tomal (8.2) and everything worked fine. So... what is really needed to?
@orb3000: when a newbie comes here asking for instruction on how to flash you always make a ctrl+c ctrl+v with wiki link... Why don't you try reading it with "newbie's eyes"? As kryogenik said, I won't attack you, it's just my thought...
Cheers...
kryogenik said:
Orb, that Wiki entry needs updating somewhat. There's loads of issues not covered there. The Tomal is a single installer and presumably doesn't need the programs mentioned (though it briefly mentions that at the end). There should be a distinction made there. Some ROM's need these programs, some are single installers, if so ... ... ... ... etc. Not some half-assed brief mention with no other instructions. I presume I just double click the installer in Bootloader and leave it to it???
It says I need to CID/EROM unlock but fails to explain what these are?! More searching shows that it's extended ROM and SIM lock that need removing. What point is there using acronyms for a supposed 'newbie' tutorial..
My unit won't run the EROM program complaining of needing a new NET framework.
This isn't mentioned. Not that you may get this error, what it is, or what you need to do if you do.
The SIM unlock won't run either. Once my unit is in bootloader mode and showing 'serial' I plug in the USB lead and it shows 'USB'. I run the SIM unlocker and it eventually says 'this is not for your device'. More searching and I find I need to be using XP to do this, not Windows 7 or Vista.
Searching about I see loads of people with similar problems. If the Wiki was updated, then when people pointed users to it, then it would do it's job (which is presumably to help people and prevent the forum being full of questions, which it obviously is..).
Looks like I need to get onto an XP machine and do some serious searching through the sometimes 50 page long threads before I risk bricking my Uni.
I'm more than happy to do research if that's what I need to do, but what's the point in promoting a Wiki if you have to ignore half of what it says and find out for yourself anyway?
Not a rant at you by the way. Just a post made from observations.
Cheers.
Click to expand...
Click to collapse
Yeah, as dear Admin said "Wiki is a strange place"
Why not try to post this request on the proper place on general section
"request to mods by users"
I think that will be the place to have an answer
Cheers,
Auzman said:
I tried reading wiki to get some answers, but the only thing I obtained was confusion.
I'm really not a newbie on computer systems, and I assure that the wiki has to be freshed out!
Click to expand...
Click to collapse
Exactly. There are some very odd ideas about what a tutorial is.
I'm hardly a newbie myself, but when there's something so valuable at risk it obviously makes sense for things to be right? Why bother otherwise.
Turning back to the wm5 uni, I simply ran the executable from Tomal (8.2) and everything worked fine. So... what is really needed to?
Click to expand...
Click to collapse
Well, I've got the extended ROM showing. I can understand that needing to be done - perhaps the new ROM needs it writable. I can't for the life of me imagine why the unit needs to be SIM unlocked though?? I have seen posts from people who have SIM unlocked AFTER a ROM flash so I'm thinking perhaps this isn't the case?
Did you do either of these? Or maybe your unit was already in this state?
orb3000 said:
Yeah, as dear Admin said "Wiki is a strange place"
Why not try to post this request on the proper place on general section
"request to mods by users"
I think that will be the place to have an answer
Click to expand...
Click to collapse
Thanks Orb. But it's not a request. I have a feeling it wouldn't be acted upon anyway. I can't be the first to point out inconsistencies.
I run a website and Vbulletin forum too. The day I have to rely on someone else to tell me it's not right is the day I give it up.
It sounds like I'm bashing XDAD. I'm really not. It's been a lifeline for me numerous times (the forum I must stress, not the WIKI).
I'm just surprised that such a fantastic resource is being let down by the one thing it should be proud of.
Auzman said:
Hi kryogenik!
I completely agree with you. My Uni came to me from uk with WM6.0, so I supposed it was unlocked and I made various flashes with no fear.
With a friend of mine Uni things were different: it had a stock WM5 and I tried reading wiki to get some answers, but the only thing I obtained was confusion.
I'm really not a newbie on computer systems, and I assure that the wiki has to be freshed out!
Turning back to the wm5 uni, I simply ran the executable from Tomal (8.2) and everything worked fine. So... what is really needed to?
@orb3000: when a newbie comes here asking for instruction on how to flash you always make a ctrl+c ctrl+v with wiki link... Why don't you try reading it with "newbie's eyes"? As kryogenik said, I won't attack you, it's just my thought...
Cheers...
Click to expand...
Click to collapse
I also was a newbie sometime, and I found that if everybody gives me easyly all my questions and problems I will not learn never! and I will get used to demand that people has to give me the answer right away!
So no my friend, I understand is not an attack and I´m also friendly:
But said that I´ll push newbies to do it by themselves, even if it´s a little bit more difficult
At the end they as me wil apreciate it, because we learn to SEARCH and READ
lol.
Cute idea but there's a big difference between encouraging someone to help themselves and pointing them to articles that do the exact opposite to what they're supposed to do (i.e. confuse rather than assist).
Everyone needs to start somewhere, but you NEED to have at least some correct and up to date information to send you on your way.
You wouldn't give someone a manual for a 1972 Ford and tell them to read it so they can fix their 2009 model.
Anyway, that's my opinion on it. I hope one day someone has time to add missing bits to the Wiki. I appreciate it could be a major task. As I said, essentially this will save on hundreds of people posting the same problems over and over again and people getting sick of replying to the same posts over and over again.
It's simple common sense.
OUT
Agree mate
I´ll try to find out how we can update the Wiki
Have a good day
@All,
As a celebration for my 1000th post, I decided to open a new thread based on Tweakman's idea, which seemed to work very well in the Development and Hacking Section. The idea is simple, a single thread for all Questions, Problems, and Concerns regarding Blue Angel. This includes, but it is not limited to:
[highlight]*Problems with Flashing.[/highlight]
Can't get your device in bootloader? Did it freeze during flashing and now it doesn't get past the 4 colored screen? Are you a complete noob and need some guidance as to how to flash? Etc.
[highlight]*Have questions about which Rom is best?[/highlight]
[highlight]*Want to install software but don't know if it is compatible with your BA[/highlight]
You get my point. All the questions that I have seen/answered over the past couple of months are just repetitions of posts, threads, and things that are readily available on the wiki or in other threads. However, people are either lazy, don't know what a Wiki is / where to find it, or just flat out don't know how to search (or read the forum rules for that matter). Having something general (in this case a sticky) that says "Hey, if you have a question, you can ask here" should draw enough attention and start minimizing the number of new threads and posts opened by users (both new and seasoned). This way, we will be able to keep the development threads a little cleaner and smaller... hence making the site's search function work a little better in the process.
@Seniors,
Kinda like the Q&A team, I will need your help in trying to keep the influx of questions to a certain level by answering them as we see them. None of us are logged in 24/7 (or at least some of us aren't ), but if you guys see a question, please try to answer it. I know that xplode, Chef_Tony, markanthonypr, red_hanks, sun_dream, imatrix, +Que_PPC, motisu, and others normally try to keep this under control, but if we centralize it and contain it, we will have a cleaner forum.
Reserved for future use.
Post Stickied Per Request...
Siemens SX66 BlueAngel Q&A, Help
You know very well you can count on us. Great idea mate. Also congrats on your 1,000's post. I've added a few "tags" to the thread. I hope some others do the same to. Tags help users to find what they are looking for when they use search.
hi
hi specialists
my friend has Blue Angel,he has strange problems.
in (sounds & notification),it didnot saved after changing any parameter,we tried by reflash the rom again,but nothing changed,also we reinstalled radio 1.15 but no change,also the ring tone of the msg is discontinue or irregular when played,and some times didnot wake up (of the device) when recieve a msg.
this is strange issued problems but in mine (BA) every thing is ok,this problems only in my friend (BA),I mate PDA2K.
any ideas?any suggestions?
thnx
notice:when we down grade to wm 6.1 every thing is ok
homam_france said:
hi specialists
my friend has Blue Angel,he has strange problems.
in (sounds & notification),it didnot saved after changing any parameter,we tried by reflash the rom again,but nothing changed,also we reinstalled radio 1.15 but no change,also the ring tone of the msg is discontinue or irregular when played,and some times didnot wake up (of the device) when recieve a msg.
this is strange issued problems but in mine (BA) every thing is ok,this problems only in my friend (BA),I mate PDA2K.
any ideas?any suggestions?
thnx
notice:when we down grade to wm 6.1 every thing is ok
Click to expand...
Click to collapse
Hey homam,
Thanks for kicking things off
First of all, which OS were you having problems with? This is important because it could have been a bug in a rom that could have been fixed in a later version.
@mark,
I know I can count on you, buddy I need help from the mods as well though. I cannot redirect posts to here and/or close threads
My BA, keeps turning on from standby, by a light shock! I maen, if you press the Power button, and then you knock gently on it's back, it turns back on!!
I've set to "Lock all buttons except the power button", However, I still have this issue.
Well, I must confess that once it dropped off of my hand, and it's the result of that...
Any ideas?
by "it turns back on" i assume you mean it wakes up from stand by, it doesn't really start like after a soft reset, right?
since the BA's only battery activated wake-up is in the cradle and we are not talking about soft reset, my first guess is, the battery is not to blame.
have you checked whether you can use your camera at all time? i mean, the camera_detect does not usually run at all times but if the camera connector is a little lose, from now and then it could "discover" the new camera hardware and wake up, that is unlikely for normal devices, but if yours had a crash before...
you could refer to this site for checking possible hardware reasons:
http://www.land-of-kain.de/ppc/mda3/disassembly/
the hardware things aside, there are also many possible software reasons for the device to wake up on:
- update of titanium weather
- automatic email checking
- cell broadcast
- if bluetooth is on
- if beam is on
- automatic update of any software...
plus of course the usual:
- incoming call
- incoming text message
- incoming mms
- upcoming calendar event...
so please check the possible software wake ups first to make sure this is really a hardware issue, because that would be a shame, that could be tricky to solve.
or let me put it this way, if it is really the moving that wakes it up, you have the first BA with accelerometer
EDIT: last but not least, it could only be a bug, maybe a hard reset or change of the rom could also be a way to go, since spontaneous waking up is a known bug for BAs
Chef_Tony
If there was only a way to hack the hardware and make this work at least on Edge. I can live with everything else, but its a shame paying for a full unlimited Internet service and only getting G connection Sighhhhhhh
Ok, I had to let that frustration out !!!!!!
Chef_Tony said:
by "it turns back on" i assume you mean it wakes up from stand by, it doesn't really start like after a soft reset, right?
since the BA's only battery activated wake-up is in the cradle and we are not talking about soft reset, my first guess is, the battery is not to blame.
have you checked whether you can use your camera at all time? i mean, the camera_detect does not usually run at all times but if the camera connector is a little lose, from now and then it could "discover" the new camera hardware and wake up, that is unlikely for normal devices, but if yours had a crash before...
you could refer to this site for checking possible hardware reasons:
http://www.land-of-kain.de/ppc/mda3/disassembly/
the hardware things aside, there are also many possible software reasons for the device to wake up on:
- update of titanium weather
- automatic email checking
- cell broadcast
- if bluetooth is on
- if beam is on
- automatic update of any software...
plus of course the usual:
- incoming call
- incoming text message
- incoming mms
- upcoming calendar event...
so please check the possible software wake ups first to make sure this is really a hardware issue, because that would be a shame, that could be tricky to solve.
or let me put it this way, if it is really the moving that wakes it up, you have the first BA with accelerometer
EDIT: last but not least, it could only be a bug, maybe a hard reset or change of the rom could also be a way to go, since spontaneous waking up is a known bug for BAs
Chef_Tony
Click to expand...
Click to collapse
Wow! Tony! I really appreciate your complete answer. I mean it.
Yes, as you correctly assumed, I meant wake-up. It just wakes up and continues the routine WinMo operation; no soft-reset occurs.
It's less than a year that I've replaced the battery with a new one. I remember all the funny things used to happen when the old battery was dying. But non of them were similar to this one.
It can't be the Camera. Well, I'm able to use it all the time, and the "camera_detect" has been always loaded in the processes whenever I've checked it. About the looseness thing, ummm, I'm not sure. I tried to knock on it to see if it's more sensitive than other parts. I think the upper part of the device is more likely to wake it up by an easy hit (like knocking). but it's the whole upper part, not only the camera section nor the camera button.
Unfortunately, the software possibility, is unlikely to be the problem:
I've used many ROMs on my lovely BA which 3-4 times of them taken place since the wake-up problem.
The software and the usual reasons you counted, do wake it up. but shakes, too.
Finally, to be honest, I'm agree with you! This is the first Blue Angel with accelerometer. yeaaah! I did it!
I bet my friends that I can wake my BA up, without touching any buttons or screen! It's fun this way, but I comes to be annoying when I put it in my pocket or just put it on a table! and it wakes up... consider the forced battery consumption, unwanted screen taps if I don't lock the screen. God bless A_C! and... .
I know it's a hardware issue (((((
@raizaM: My Thought.... Have you ever taken it apart? One of my BA's had 3 loose bolts inside. All 3 were from what I think is the Radio/Antenna part at top. However, in my case, I had a rattle going inside. Thats why I put it apart. You might have something loose inside, causing a connection to arc when you knock on your phone. If you do deside to open it, there is a tutorial on the wiki on how to.
markanthonypr said:
@raizaM: My Thought.... Have you ever taken it apart? One of my BA's had 3 loose bolts inside. All 3 were from what I think is the Radio/Antenna part at top. However, in my case, I had a rattle going inside. Thats why I put it apart. You might have something loose inside, causing a connection to arc when you knock on your phone. If you do deside to open it, there is a tutorial on the wiki on how to.
Click to expand...
Click to collapse
Hey mark!
I had that same issue a while back, but with only one screw (also from the same area as yours).
@raizaM
Just to knock off Chef_Tony's theory out of the table completely, try to erase camera_detect.lnk from \Windows\startup and SR your device. If Chef was right, then your issue might be gone. However, I would follow markanthony's advice and take it apart in case Chef's idea doesn't work.
Oh man, your not my hero anymore LoL.. and here I thought I would be the only one with a mechanic inside my phone.
markanthonypr said:
Oh man, your not my hero anymore LoL.. and here I thought I would be the only one with a mechanic inside my phone.
Click to expand...
Click to collapse
Well, it kept me entertained when my BA would run out of juice
Thanks for your kind advices.
Actually, I tried to remove "camrea_detect" from the startup once, but any way, I gave it a shot again... no success...
Frankly, I'm a lil bit afraid to take my lovely BA apart... :-s... What if... :-(
But, I guess sooner or later I need to do so. so what the heck... lets do it.
Maybe I'll do it tonight. Guys please help me through it. I don't wanna loose my Angel!
Ton'y link provided in the previous posts, would be my start:
http://www.land-of-kain.de/ppc/mda3/disassembly/
any more advices?
raizaM: You're not going to go that far deep. Only remove the cover. If you look at picture #4 on that link, the top green area has about 6 bolts all around it. Those were the ones that were loose on mine. 2 of them were rattling inside the phone. I still can't believe they didn't cause a short circuit. You don't need to go down into the camshell area. Do you use the sliding keyboard? If so, you could have a bad flex cable. But, don't worry about tha for now. Just remove back cover and carefull inspect for loose bolts. Don't over tighten them.
all the master please help, my BA strange,,,,, the screen suddenly go dead after actived wifi or playing game, its suddenly dead, and i must push power button to turn it on again through proses like softreset, that in battery power. but if i conect in charger power mode, i turn wifi,playing game, its normal, the BA still on and working normal,
please2,,,,,if someone knows the problem please help, im desper now....
loryshoe said:
all the master please help, my BA strange,,,,, the screen suddenly go dead after actived wifi or playing game, its suddenly dead, and i must push power button to turn it on again through proses like softreset, that in battery power. but if i conect in charger power mode, i turn wifi,playing game, its normal, the BA still on and working normal,
please2,,,,,if someone knows the problem please help, im desper now....
Click to expand...
Click to collapse
It seems that you have the backlight settings set to dim/turn off too fast. Go to \Settings\System\Backlight and modify the settings in there (particularly the ones labeled "On Battery Power"). Then, soft reset the device (stylus on the bottom).
Hope this helps.
markanthonypr said:
raizaM: You're not going to go that far deep. Only remove the cover. If you look at picture #4 on that link, the top green area has about 6 bolts all around it. Those were the ones that were loose on mine. 2 of them were rattling inside the phone. I still can't believe they didn't cause a short circuit. You don't need to go down into the camshell area. Do you use the sliding keyboard? If so, you could have a bad flex cable. But, don't worry about tha for now. Just remove back cover and carefull inspect for loose bolts. Don't over tighten them.
Click to expand...
Click to collapse
egzthunder1 said:
It seems that you have the backlight settings set to dim/turn off too fast. Go to \Settings\System\Backlight and modify the settings in there (particularly the ones labeled "On Battery Power"). Then, soft reset the device (stylus on the bottom).
Hope this helps.
Click to expand...
Click to collapse
not the setting, it got black scren, its dead screen after running wifi or application, suddenly goes dead, black screen,.
Have you tried with another battery? It sounds to me like your battery is about to die. It won't hold the heavy battery consumption of Wi-Fi and heavy CPU usage while on Games. Try with another battery. Also make sure you followed Egzthunders suggestion to change your Power Settings. If you still need help, post back and include more info about your device, such as, what version of Windows are you running and how old/new is your battery.
I for the life of me cant figure out why my camera is completely dead! I have FULLY wiped all caches,everything under 'WIPE' via AMONS and even formatted my SD card as well as trying an alternate SD card(both 8GB--C6speed)--never had a problem w either card on ANY ROM...ALL OF A SUDDEN the past 2days my camera goes to a FULL BLACK SCREEN,when pressing the CAMERA icon. Occasionally the taskbar will remain uptop but will timeout when screen display shutsoff. Now if i launch CAMERA via DESIRE ROM(KING),ill get the notice about clicking trackball to resume camera but as soon as i click it,the message dissapears and the screen will go back to black screen again...and repeat. I SWEAR i have DONE MULTIPLE COMPLETE WIPES AND REFORMATS so im left to believe its THE HARDWARE itself! CAN ANYBODY PLEASE LEND ME A HAND IF the similar problemhas occured...On the Nandroid backups that ive restored from FULLY FUNCTIONING bkups,if i launch NEXUS TORCH it will say CANNOT ACCESS LED---this is THE ONLY info besides the "camera wake message"mentioned earlier that i can provide. Thanks in advance and pleas edont flame for NOT being in Q&A bc this is more of a DEV related restore question.
**oh and BTW--I DID TRY TO INSTALL the DESIRE R2 cam fix and does nothing. I tried it when all was working fine early in the week and it did nothing to help FLASH timing for me,so i NAN restored back to prior state and CAMERA continued working until about THURSDAY night--regardless--PHONE is in OUT OF BOX STATE--MINUS UNLOCKED and it STILL doesnt work!---PEACE and Happy Mothers Day to any Mothers out there in XDA world!
***Captain Obvious to the Rescue!!***
Your hardware has malfunctioned. Contact HTC for a repair.
1. you may have a broken camera, try a stock rom
2. your caps lock button is definitely broken
3. you posted in the wrong section
ghostrida said:
1. you may have a broken camera, try a stock rom
2. your caps lock button is definitely broken
3. you posted in the wrong section
Click to expand...
Click to collapse
1. i should have known you were from Philly and cant read--I TRIED STOCK ROM
2. CAPS is to put highlights on key terms so idiots dont read over the fact that I DID TRY STOCK ROM---see how that helps?
3. Thanks for your informative responses---any suggestions from CAPTAIN OBVIOUS how to get service on a ROOTED device without being charged full price on the phone?? Ahhh--thought not!--So i tried here to see if anyone else had similar situation. AGAIN-thanks for your help as well SERIAL TOON--geez
If it's a hardware failure they won't charge you.
I think it will help if you go through Google Cust service first...they will end up redirecting you to HTC repair. Provide all truthful information on your issue, proving that you have done some legitimate trouble shooting and they will realize that it is a hardware issue, not the ROM flashing or bootloader unlocking that caused the problem. Someone else on the xda forums had a rooted phone with bluetooth problem and was able to send to HTC for repair for free...with a 4 day turnaround!
Good luck!
What do you base this on...Heresay?
BlueScreenJunky said:
If it's a hardware failure they won't charge you.
Click to expand...
Click to collapse
I didnt intend to sound rude,im just a little pissed right now..I Only ask bc i already had an issue in January days after receipt of phone. Issue was solved by sending me a new battery bc other was causing random shutdowns (ive since forwarded this info to another XDAmember that had exact same issue and they give him replacement phone at 1st but issue continued to occur--i told him about my story after he posted his problem, he contacted them this weekend and confirmed with me today that a new battery was on the way..see my public IM's for info). Anyway,when i was dealing with the battery issue they said they would definately NOT be able to fix under warranty bc the phone is rooted and unlocked. I can attest to the few people on here that said theyve been successful in such cases,but either way,IVE ALREADY STATED that i tried the DESIRE R2 camera kernal to see if that helps,so im not going to be dishonest and tell them i havent tried anything other than custom roms. Again..positive suggestions or similar experiences with warranty info would be appreciated....trollers looking for a funny post or to degrade people can eat one!
joshlusignan said:
I think it will help if you go through Google Cust service first...they will end up redirecting you to HTC repair. Provide all truthful information on your issue, proving that you have done some legitimate trouble shooting and they will realize that it is a hardware issue, not the ROM flashing or bootloader unlocking that caused the problem. Someone else on the xda forums had a rooted phone with bluetooth problem and was able to send to HTC for repair for free...with a 4 day turnaround!
Good luck!
Click to expand...
Click to collapse
Thanks JOSH, ill look into it tommorrow--as i stated tho--i feel im being dishonest for trying the DESIRE R2 cam and saying that they should cover it---uninformed people will assume THAT couldve caused it,even though i used phone afterwards for a few days w no side effects
Hey Milton, like others have mentioned in here might want to try flash back to stock and seeing if the problem persists. If it does then your looking at a hardware problem and you should contact HTC/google for repair.
Yea...i was thinking that from get go--(hardware prob). Im on cheesy STOCK ROM right now and have been for cpl hrs...but its obvious its gotta be hardware...NOW comes the crappy part of trying to explain it to HTC when attempting to get an RMA!--Yee Haa!
MOD PLEASE CLOSE OR DELETE---THANKS!
Milton, among the items on the very small list of things folks around here want in return for helping you is that you lay off the caps. Doesn't highlight anything that you'd want to highlight.
Doug
Okay,,,this is weird!!..My TORCH hadnt been working at all either, the whole time ive had the camera problem. Now ,the torch will work for ONE TURN ON, then if i launch CAMERA, the cam still doesnt work. i have to HOME and HOME only to get back to home screen..BACK ARROW does nothing except vibrate,indicating touch response. If i then re-launch TORCH, it doesnt work....!??SOMETHING is ODD--and im split whether its hardware- or some sorta SYSTEM file that stays stuck even after all STOCK FLASHES and everything!--again,reminder..the LED TORCH hadnt worked up until this point--unit has NEVER been dropped,slid out of pocket from 1foot high onto superthick carpet,so i doubt its a loose internal cable...Hmmm...
milton007 said:
Okay,,,this is weird!!..My TORCH hadnt been working at all either, the whole time ive had the camera problem. Now ,the torch will work for ONE TURN ON, then if i launch CAMERA, the cam still doesnt work. i have to HOME and HOME only to get back to home screen..BACK ARROW does nothing except vibrate,indicating touch response. If i then re-launch TORCH, it doesnt work....!??SOMETHING is ODD--and im split whether its hardware- or some sorta SYSTEM file that stays stuck even after all STOCK FLASHES and everything!--again,reminder..the LED TORCH hadnt worked up until this point--unit has NEVER been dropped,slid out of pocket from 1foot high onto superthick carpet,so i doubt its a loose internal cable...Hmmm...
Click to expand...
Click to collapse
That seriously hurts my eyes to look at. Try using proper punctuation and grammar. It's very simple and still gets your point across.
As for your phone. Call Google which will probably have you call HTC. People have gotten their rooted devices fixed for free if it's a genuine hardware problem and nothing caused from the rooting process.
milton007 said:
Okay,,,this is weird!!..My TORCH hadnt been working at all either, the whole time ive had the camera problem. Now ,the torch will work for ONE TURN ON, then if i launch CAMERA, the cam still doesnt work. i have to HOME and HOME only to get back to home screen..BACK ARROW does nothing except vibrate,indicating touch response. If i then re-launch TORCH, it doesnt work....!??SOMETHING is ODD--and im split whether its hardware- or some sorta SYSTEM file that stays stuck even after all STOCK FLASHES and everything!--again,reminder..the LED TORCH hadnt worked up until this point--unit has NEVER been dropped,slid out of pocket from 1foot high onto superthick carpet,so i doubt its a loose internal cable...Hmmm...
Click to expand...
Click to collapse
You should send it to HTC for repair. Charging fee or not, but thats the only option to you right now because its a hardware failure.
mikroN1 said:
That seriously hurts my eyes to look at. Try using proper punctuation and grammar. It's very simple and still gets your point across.
Click to expand...
Click to collapse
I was thinking the exact same thing, don't know where he must have learned how to type. Then you criticize people from Philly, or whatever its called somewhere, for not knowing how to read. I would say mirror that advice and learn how to type.. type properly.
Torch will work until camera app is used then it wont work again until i reboot. After reboot, torch will work ONLY on regular/lower setting. MAX brightness will not work. Toggle back to LOW setting and torch will work again. Im going to try what DOUG suggested bc that is the only thing i havent tried yet...but the way torch and camera are acting up and requiring reboots keeps me willing to try software tricks first...WHAT ties the TORCH's HI setting to the camera app adn yet keeps the LOW setting seperate!??..ill try the TORCH dev real quick for some insight on how the two work hand in hand.Thanks for anyone using their time to help instead of criticize. Sorry for mocking ones ability to read but i was quite [email protected] time bc i lost a major function on my phone.My apologies to all
Seriously Milton? More?
milton007 said:
Please DONT lend assistance to someone like this. IF they cant bither to read THE MOST SIMPLEST instructions, they should NOT be attempting this in the first place...thats just sheer ignorance...
Click to expand...
Click to collapse
The attitude, hostility and the caps are not welcome here.
Along with the others I have no sympathy for you. Learn proper grammar and get a better attitude.
Troll much? Go tell your mother happy mothers day if you have that much time to pull up old posts from people asking questions in a 'kernal forum' about basics. Basics that anyone should know, if not they stand a much better chance on damging their phone. It wasnt being ignorant. Since you know everything there is to know about everyones posts, tell me where the topic dealing with my specific camera issue has been previously posted and ill be glad to read and search thru that forum. I wasnt the one asking questions about something mentioned in the OP (uh oh i used caps--oh geesh-someones gonna be saaad now!)and numerous pages before. Im sorry i dont spend all my life on forums to know that only words approved for caps are indeed CAPITALIZED. Petty little boy-and by the way, i was trying to stress your good advice by typing your name in caps so people would credit you with the help-Sorry to have taken your precious time sir. Good day.
Hi all,
I have an Archos 70IT but, with an accident, the screen broke up, and now i wan't to know if I can do something with my Archos, like installing Linux on it, making a server or whatever else than letting it on the ground.
Thanks for your answer
eagleofdeath13 said:
Hi all,
I have an Archos 70IT but, with an accident, the screen broke up, and now i wan't to know if I can do something with my Archos, like installing Linux on it, making a server or whatever else than letting it on the ground.
Thanks for your answer
Click to expand...
Click to collapse
if it still runs then great - but how can you configure it to enable ssh, some kind of a share, or even usb access, without a screen?
can you use it by plugging an hdmi monitor to it? ( don' tknow if your model has hdmi out)
First of all thanks to reply ^^
Yes it still run (or it seems to run ^^) and the "how?" is the the question that i ask ^^
I will try to plug it to an HDMI monitor but I think it will not work (to make the external screen work you have to use a button, that i can't use without screen).
The only thing i've done is going in recovery and use the flash disk with my compute. If only we could make our self .aos i could make a one that accept SSH access, and then the work will be done, but we can't
hmmm.... that's a tricky one then.
Without trying to sound negative, all I can think of is to get another one, take both of them apart to get access to the screen connectors, attach working screen to yours and do whatever programming changes are needed so that when you power it on you can access it or vnc control it from another machine by default without having to touch anything. then put the other one together again and return it to the store or give it back to your generous friend who let you borrow it for the weekend
and no - I'm not that generous ;-)
There may be some other brilliant method but I certainly don't know of it in standard android.
I have bought another one (i was addicted to this thing ^^) but ... open it wil break the garanty so i'm not sure. Maybe i will wait some time before doing this (or wait another idea) but thanks, it's a really good idea ^^
If you can see anything on the screen you can get a wireless keyboard mouse combo to use the device. If you can't see anything you might have a pretty hard time and a lot of guess work flashing a custom kernel with SSH enabled by default. Does angstrom have SSH enabled?
Also not really android dev...
Sent from my A101IT using Tapatalk
Nothing visible on the screen, only white :S And for Angström I don't know.
(Could someone replace this subject on the right place!)
eagleofdeath13 said:
I have bought another one (i was addicted to this thing ^^) but ... open it wil break the garanty so i'm not sure. Maybe i will wait some time before doing this (or wait another idea) but thanks, it's a really good idea ^^
Click to expand...
Click to collapse
Cool, I agree about the warranty issue if you own the second 101 yourself.
My suggestions were slightly illegal (buy then return to store "I don't want it after all so would like a refund" LoL) or just not very nice ("thanks, I liked borrowing that over the weekend to play games" LoL).
Wait as long as possible in case someone more clever can help you out.
But I'm glad that my ideas weren't completely crazy anyhow
Cheers,
Don
But i'm also afraid to break something ^^
eagleofdeath13 said:
But i'm also afraid to break something ^^
Click to expand...
Click to collapse
that would stop me from doing it also. I was hoping you were more confident working insde tiny electronic devices than I am.
d31b0y said:
If you can see anything on the screen you can get a wireless keyboard mouse combo to use the device. If you can't see anything you might have a pretty hard time and a lot of guess work flashing a custom kernel with SSH enabled by default. Does angstrom have SSH enabled?
Also not really android dev...
Sent from my A101IT using Tapatalk
Click to expand...
Click to collapse
Hmm, seems like you could flash it with a cooked Uruk configured how you wanted it so that it would work with ssh/vnc from a straight boot. I'm trying to think of the steps that would be involved and if you would need a working screen.
If you knew the exact location of the menu items on the Uruk install you could do it without the screen (press vol down twice, then enter; next step press vol once, enter, etc - these are just examples, obviously). I think Uruk comes with ssh enabled by default. I could be wrong or missing a key step you can't do blindly, just thinking out loud here.
I've never used UrukDroid, but if someone here knows the steps it would be very, very nice! Thanks in advance and Thanks for your help.
Pull apart the broken one and see what the make/model of the screen is and then see if you can buy a new screen.
You could also contact Archos and buy a screen from them.
Thanks, yes I think i'll try to do that ^^
Same problem ...
Broke my screen too!
I'm trying this route ... EBAY - cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&item=230598268646
Cheaper but you have to use Western-Union: item.taobao.com/item.htm?id=9004146795
I dropped the http : //. I'm new to the forum and they do not let new members post links. I assure all that I have no connection to either link. In fact, I'm still waiting for my purchase from EBAY (it's only been a week or so from over-seas). I obtained the second link from forum(.)archosfans(.)com and had contact with them - they wanted $77 USD plus shipping and payment via WesternUnion. I chose EBAY because I felt I had more financial protection.