Database Users

My smt5600 is not booting up!!!!

I was trying to upgrade to the WM5 rom. But it went wrong and now my smt5600 is not booting up at all. Its DEAD. Anyone have any idea how i can get the phone working again. I connect the phone to the USB cable and there still nothing. HELP somebody....

Can you get it manually in bootloadermode? If that's possible, connect USB & reflash. I don't know how to get a typhoon in bootloader, that's something you've got to find out yourself.
Regards, M
[edit]
& the wiki tells you how to get it in bootloader:
the bootloader
enter bootloader, by turning off device, then hold down camera button, and briefly press the power button.
see http://www.clubimate.com/index.asp?PageAction=DEVICEFAQ_SP3 for more info
an easier way, that does not require the right timing for button presses, is to hook your device to usb, turn it off. press the camera button, it should immediately enter the bootloader.

The phone seems dead. It will not turn on. No lights. It seems if the flash memory is shut down. I tried to flash it with WM5 and look where it got me. I wish I can get to bootload but nothing.

I assume this WM5 'release' wasn't released by your provider, was it? Did they release any official updates & is your phone still covered under warranty? If so try to get it fixed with the claim that you upgraded with the rom they supplied. It's worth to try, cause I don't know no other way than a Service Center to get it functioning again.
BTW was your battery full enough or almost empty?
Feeling with you, M

NO USB connection in bootloader

Hi Everyone!
I got the following problem with my Charmer:
The previous guy, who had this phone, flashed it with a wrong ROM. The phone hangs at the T-mobile splash screen. I beleived that I can fix this problem, because I made this with my Charmer earlier. (Thanks for rmagyar's Charmer rescue kit). But at this time, when I put the phone into bootloader mode to use the rescue kit, there is no usb connection. It can't be charged, and the PC doesn't see the phone.
Any ideas, how to flash the rescue kit? Can I get back the usb connection?

I have same problem, anyone know?

try this, plug usb cable in PDA, press and hold power+camera button, tick RESET 5 sec and release reset button, but hold power+camera. if you see left side screen USB release power+camera button. it work for me, may be helped you!!!

I am sorry, I have this problem on my Xperia X1, but maybe someone from there have an idea...

Check:Start->Setting->NetworkConnection->WindowsMobile-basedDevice :
If Disabled than restart PC.

HD2 die after Up Rom, not enter bootloader, help Me

Hd2 UP ROM death, not enter bootloader (not the screen). Now the machine does not boot up anymore
You do not have any solutions?
MTTY not receive?
Please help me the solutions? Thanks

funtigers said:
Hd2 UP ROM death, not enter bootloader (not the screen). Now the machine does not boot up anymore
You do not have any solutions?
MTTY not receive?
Please help me the solutions? Thanks
Click to expand...
Click to collapse
check your battery pins, might be bended and do not touch the circuit.

pin 80%, but not enter bootloader

funtigers said:
pin 80%, but not enter bootloader
Click to expand...
Click to collapse
Like said earlier, pin could be a problem, or try a reset by pressing the red pin at the back after opening the battery cover. Or take it to the service center!

Laptool not support chip flash hd2, hic

funtigers said:
Laptool not support chip flash hd2, hic
Click to expand...
Click to collapse
Please help me solution jtag HD2

hd2 boot
I had an incident in which I was installing a program and after the restart, it didnt boot past (orange) windows screen. I thought I bricked it but I looked up a factory forced reset. Maybe it'll work for you.
With the phone off, press and hold the vol up, down and power button together then release them together to start up. After it starts up, it will ask you if you want to do a factory install, press vol up button and PRESTO! it SHOULD be back up and running. Hopefully this will help.

HD2 stuck on o2 logo

I bought the HD2 few days ago, I dont know what the last owner did but HD2 doesn’t wanna start, just stuck on O2 logo and that’s it.
I’ve tried to do hard reset or bootload but ineffective. Can you maybe help me? Thanks in advance.

AdrianW said:
I bought the HD2 few days ago, I dont know what the last owner did but HD2 doesn’t wanna start, just stuck on O2 logo and that’s it.
I’ve tried to do hard reset or bootload but ineffective. Can you maybe help me? Thanks in advance.
Click to expand...
Click to collapse
So you can't get to the bootloader? (holding down vol down from a cold boot)?
Does it show the version information down in the bottom corner when starting?

I've tried many times but nothing happen.
No there is no info about rom/radio etc.
Have you got any ideas how can I get to bootloader?

Remove the SD Card and boot the phone.
Just to confirm you can't get into BootLoader mode - Press and hold the Volume Down button then tap the Power button. Don't let go of the Volume Down button until the Bootloader screen apears.

Thanks, I know how I can get into BootLoader mode but that doesn't work.
Any other ideas?

There is no other way to get into BootLoader mode.
Have you tried booting without the SD Card and checked that there is no bent battery pins?
It may be a faulty volume button or other hardware issue.
If it was a faulty ROM or RADIO then you would still be able to get into BootLoader.

**HELP** Oneplus 6t stuck

Hello guys,
I don't know how to really mess with rooting but i thought id give it a try with my one plus 6t.
But after trying to do the steps its not stuck on a black screen that has an orange exclamation point and sat the boot loader is unlocked and software integrity cannot be guaranteed. any data store on this device may be available...
I am using a Mac computer to do this and don't have a windows pc.
Can someone help me fix this phones its just stuck on this screen and wont do anything aside from turning it on and off.
I cant post any images becuase i dont have a nother phone, smh.

solve it via the forums ty

i dont know how to close close this post now

how did you fix it? mine is doing the same thing

i press the
ericv99 said:
how did you fix it? mine is doing the same thing
Click to expand...
Click to collapse
Hey ericv99,
I pressed the volume up and power button to reset the oneplus. then once it was off i press the volume down and power down for a while and it booted into the boot loader screen. then i went on my mac and sent the lineage operating system to my phone via android file transfer. took me a bunch of tries at first since i dont know what im doing but it worked.

i cant boot into any system only boot loop or bootloader

ericv99 said:
i cant boot into any system only boot loop or bootloader
Click to expand...
Click to collapse
which one is it the one that says "the boot loader is unlocked and software.." or is it the one that lets you see the phones serial code info and you can control the phone with the volume up or volume down and the power button ?

it bootloops in the "bootloader is unloicked and software" but i can get into the bootloader that has the serial info

ericv99 said:
it bootloops in the "bootloader is unloicked and software" but i can get into the bootloader that has the serial info
Click to expand...
Click to collapse
ok, yea thats the part that took me a while to get past, you have to basically turn off the phone with volume up and power bottom then once its off you press volume down and power bottom for what seems like a long time. to turn it back on and get past this screen.
It might take 3-4 tries to get it right but it should take you past that screen and onto the serial info screen.

i can get into the serial screen. ive flashed twrp. it cant get into that because of that stupid software screen