qtek freeze after rom upgrade - MDA, XDA, 1010 Software Upgrading

Hi,
after upgrading the radio,from qtek.dk/software my qtek
ask for sid code and then it freeze up??
I tried hard reset but it just show qtek and then freeze up?
Please help. Hope you all there be sure it is the right rom
upgrade before going ahead. Dumb thing didnt say the rom
wasnt comparable etc. now I and I beieve few of us have been
stuck with a frozen device that doesnt work no more.
Hope those who have the sme problem corrected can help .
Thank you. Urgent reply please.

Yep upgrade ROM First then Radio for more information check the ROM Section in the Forums or http://xda-developers.com/rom/
:wink:

Related

FORMAT FAIL !! during a hard reset.

hey guys thanks for being helpful alot of times..
My O2 XDA MINI S gets stuck at the startup operator logo ..
I FLASHED IT WITH THE NEW 2.21.4.1 ROM AND OS ,, but its still the same
NOW IM TRYING TO FORMAT IT WITH A HARD RESET BY PRESSING THE SEND BUTTON ,,BUT IT SAYS "FORMAT FAIL"..... Please help me as i really miss the phone..
I am afraid that usually means you have a faulty rom memory chip. Send the device back to the supplier for repair - its a hardware problem not a software problem.
Thankz for the reply ....
BUT IF ITS A hardware fault how was i able to flash it to the newer version ? 2.21 ?
Is there any thing else i can do to the phone ? to make it ? LIKE THE IMEI OR SOME KIND OF LOCK ?
help would be appreciated !!
simlockboy said:
Thankz for the reply ....
BUT IF ITS A hardware fault how was i able to flash it to the newer version ? 2.21 ?
Is there any thing else i can do to the phone ? to make it ? LIKE THE IMEI OR SOME KIND OF LOCK ?
help would be appreciated !!
Click to expand...
Click to collapse
The rom will flash but stll fails to boot - there have been other posts with exact same problem and that was the reply by summiter or faria if I remember right. (Both v experienced at flashing and putting together roms) Do a srearch - failed format will prob find those posts.
alright i will research and get back .... thankyou very much .. appreciate your help
I DID ALOT of researching and got this.. please see it im sure everyone will need it some time.... and please advise me on what to do next ..my email is
[email protected]
if you have a os dump of a O2 XDA MINI S .. please mail it to me
Regards
ive heard if I can upgrade the phone through the SD CARD then it can get back to normal ..
Please some one can be kind enough to guide me through it or mail me the dump of the os for the sd card.. O2 XDA MINI S
Me too ! The same to you !
simlockboy said:
ive heard if I can upgrade the phone through the SD CARD then it can get back to normal ..
Please some one can be kind enough to guide me through it or mail me the dump of the os for the sd card.. O2 XDA MINI S
Click to expand...
Click to collapse
I had and now I can't do anything, so hope somebody help us, try to find out how to save ourlife's !
Pls help us !
ps: My' mobile is T-Mobile MDA
Me too ! The same to you !
Pls Mod delete it for me ! Thanks !
formate failed
i have o2 1.5.4.2
ipl spl 1.05
flashed with lauch rom
steel same
whats a problem...

Help me ! After up rom

Dear madam & Sir,
When i up rom for t-mobile mda pro to end, i recieved error notice.
I have some problems as below:
1-PPC can not Active Sync with PC
2-PPC can not charge a bettery.
3-PPC can not bring back to Bootloader.
4-PPC can not sort reset.
Please help me !!!!
Thanks
go into bootloader on your phone if you dont know what that is search it up then get a rom upgrade DONE!

Dopod C800 stuck in boot screen.... plz Help

Hi Can anyone please help me how to overcome my problem? My device is stuck in the boot screen . Things don't change even after hard reset...Can anyone upload the original shipped rom for Dopod C800 1.09 rom?
hey my friend the same just happend to meee ;(
Do you found a solution ?
murali509 said:
Hi Can anyone please help me how to overcome my problem? My device is stuck in the boot screen . Things don't change even after hard reset...
Click to expand...
Click to collapse
put the phone in bootloader and flash the original rom
I have the same problem. No matter what rom code I flashed, always update error 300. Is there any idea to get rid of this problem? Thanks!
Strange... Isn't error 300 about using a RUU flasher on the wrong device?
Got my device to life after going to the service centre.... Successfully changed my Rom this time after using Hard spl by Canonyang and now I had flashed Touch IT V4.40....
My sincere advice from my experience...
Please read the instructions thoroghly before you attempt anything..
Happy flashing
murali509 said:
Got my device to life after going to the service centre.... Successfully changed my Rom this time after using Hard spl by Canonyang and now I had flashed Touch IT V4.40....
My sincere advice from my experience...
Please read the instructions thoroghly before you attempt anything..
Happy flashing
Click to expand...
Click to collapse
THANKS!!!
We tell it soooooo often. But it is good to hear that your device is back to life.
And it is GOOD to hear that the instructions we are giving - are helpful...
FOR EVERYone...
Hey dude, thanks a lot for your new rom... I'm a novice in this field and dont know anything..Does ur rom touchit4.4 have keyboard issues on Dopod C800?
murali509 said:
Hey dude, thanks a lot for your new rom... I'm a novice in this field and dont know anything..Does ur rom touchit4.4 have keyboard issues on Dopod C800?
Click to expand...
Click to collapse
it´s NOT mine. it is ITJE!!!
please ask in this thread. and please find out keyboardissues by flashing. i guess there is noone else with dopod running it...
Thank u for the quick reply....

O2 XDA Orbit - Upgrading/Backup/Flashing

Sorry if the post has already been mentioned in another forum before.
I have an O2 XDA Orbit and i'm looking to put Fracoons Artermis rom on it http://forum.xda-developers.com/show...o♦.
I'm pretty new to flashing phones and PDA's but i'm quite experienced with a PC so shouldnt need to much help!
I was wondering what steps I should ensure to take to make sure that I dont turn it into a brick, I could do with a complete guide! I've also been told that i'll need to run the Artermus USPL program after connecting the phone. But any help and advice would be a great help. Is there anyway to backup the phone in the state it is at present if or if it doesnt go wrong?
Thankyou for the help and sorry again i've this has already been asked by someone else! Will really appreciated it!
Please if anyone can help me with my querys it would be such a help as to avoid turning my phone into a brick. I really want WM6 and the touch flo system! But would also like to know anymore information!
Many thanks, Lee.

I Really Need Ur Help Plzzzz

I REALLY NEED UR HELP PLZZZZ....after upgrade the rom of my O2 IIi become more worst and not stable......
ANYONE PLZZZZZZZZzzzzzzzzz share ur O2 2i WWE rom....lots of the link i found at this forum are dead.....i really need your help
if you got the autoconfig then is the best.....Thanks for your kindness
lots of viewing but no reply......
i had download some latest ROM at this site but after upgraded still hv those kind of problem....
somemore.....there is no sound when sync and plug in the usb.........
anyone ?
Thanks
http://www.maxishare.net/en/file/37...-1-04-bluetooth-patched-camera-fixed-rar.html
please have a look at this I think its RUU but maybe it would be use ful
Thanks bro...tat's the ROM i upgraded previously....now looking for other that work for my O2 2i.......

Categories

Resources