Dear madam & Sir,
When i up rom for t-mobile mda pro to end, i recieved error notice.
I have some problems as below:
1-PPC can not Active Sync with PC
2-PPC can not charge a bettery.
3-PPC can not bring back to Bootloader.
4-PPC can not sort reset.
Please help me !!!!
Thanks
go into bootloader on your phone if you dont know what that is search it up then get a rom upgrade DONE!
Related
Hi,
after upgrading the radio,from qtek.dk/software my qtek
ask for sid code and then it freeze up??
I tried hard reset but it just show qtek and then freeze up?
Please help. Hope you all there be sure it is the right rom
upgrade before going ahead. Dumb thing didnt say the rom
wasnt comparable etc. now I and I beieve few of us have been
stuck with a frozen device that doesnt work no more.
Hope those who have the sme problem corrected can help .
Thank you. Urgent reply please.
Yep upgrade ROM First then Radio for more information check the ROM Section in the Forums or http://xda-developers.com/rom/
:wink:
hi guys im new to the smartphone world
i just bought a cingular 8525 and unlocked it using the unlocker on this site
i have no mms option in my messages!!
what can i do to fix it?
the only options there are:
outlook email
text message
also i wanna unbrand the phone . either to the htc tytn firmware(remember ima noob at this!)
please help !
nvm about mms
i hard reset the phone and it came back!!!
Dear friends please help me.
In my previous posts i had mentioned that my atom is not syncing (via usb or bluetooth) nor is it charging as there seems to be a problem with the motherboard.
I am trying to sync via infrared. Please help me with the information whether the ROM can be upgraded with the one on the o2 website via infrared.
Thanks a million in advance.
swordfish99 said:
Dear friends please help me.
In my previous posts i had mentioned that my atom is not syncing (via usb or bluetooth) nor is it charging as there seems to be a problem with the motherboard.
I am trying to sync via infrared. Please help me with the information whether the ROM can be upgraded with the one on the o2 website via infrared.
Thanks a million in advance.
Click to expand...
Click to collapse
bro, ROM can be upgraded using the storage card. Simply put the diskimg at the root of ur card den enter bootloader mode (press center button+power+soft reset hole) Hope its help!
Cheer and good luck!!
kaidi
ckaidi said:
bro, ROM can be upgraded using the storage card. Simply put the diskimg at the root of ur card den enter bootloader mode (press center button+power+soft reset hole) Hope its help!
Cheer and good luck!!
kaidi
Click to expand...
Click to collapse
Brother Fist of all thanks a million for responding. Brother I am a newbie hence I do not know much of the process you mentioned above. Please tell me in detail step by step what to do. Right now I am downloading the ROM from the O2's website and keeping on my system.
Waiting for your kind reply please let me know.
I am new member in this forum please help me .. one i mate kjam MDA unlock please give me full details how can unlock this device . how can downgrade ,this mobile.
Welcome to the forum
If you read the stickies at the start of the Wizard upgrading page you will read an excellent guide which will explain all you need to unlock and upgrade your phone
Good luck
The Wiki
shinod said:
I am new member in this forum please help me .. one i mate kjam MDA unlock please give me full details how can unlock this device . how can downgrade ,this mobile.
Click to expand...
Click to collapse
go here
http://wiki.xda-developers.com/index.php?pagename=HTC_Wizard
make sure you realise what type you have first ,if it is a G3 or a G4 , before unlocking if you get that wrong it is bye bye phone hello paperweight
All the files for sim and cid unlocking, which include the button downgrade rom an official o2 rom and lokiwiz that you need are in this file
http://rapidshare.com/files/53377946/Wizard__CID___Sim_Unlocker.rar
i cant remember if i set a password on it,if there is a password it is ----> scousemartin
can unlock
try with that rom file cant flash or upgrade my wizard only error INVALID vendor id please any one can help me please ... lokwiz software cant work error unknown device. that is the probelm
wizard
please any one can help me...........
Hi All,
Am new to this forum ! but have been a passive member since very long time !
Now I have major issue and need help from the fellow members !
I have a Imate SP3 and was trying to update the rom ! My stupidity !! I tried to flash SP5 ROM to this and at 68% the desktop application threw and error and disappeared ! the phone was stuck at 68%,so I took the battery out and from then on the phone doesn't switch on !!
So desperately need help as to what to do !! please help me guys !!
Thanks in advance !
Regards.
Ok first download a proper ROM for your SP3.
I think you can use the procedure as when you want to revert to wm2003 on this tread:
http://forum.xda-developers.com/showthread.php?t=279464
Thanks !
Hi,
Thanks a lot buddy ! but the said procedure only works if the phone is atleast in the bootlaoder mode (i,e the tricolour mode) but as I said mine is almost completely dead (no lights when charger or the usb is connected and not powering on,I mean not even the LED glows) !!!!
So Am kinda stuck in this stage ! so I need a real trick to some how gain access to the ROM and flash it completely and install the proper one ( I mean I have to erase the EEPROM completely !)
Its similar to the one in the post #8 in the link you've sent !! and the answer to it in post is what I don't want to hear !!
Anyways thanks for quick reply man ! really appreciate it !
Regards.
Hi, are you solved your problem with your phone, if not i can help you, Wright me to PM...
P.S. For all Who unlock his phone via Imei-check, please send me your used "Key file"...
charge ur batire an tray agin baby
and tel me morrrr
handsome1_blr said:
Hi All,
Am new to this forum ! but have been a passive member since very long time !
Now I have major issue and need help from the fellow members !
I have a Imate SP3 and was trying to update the rom ! My stupidity !! I tried to flash SP5 ROM to this and at 68% the desktop application threw and error and disappeared ! the phone was stuck at 68%,so I took the battery out and from then on the phone doesn't switch on !!
So desperately need help as to what to do !! please help me guys !!
Thanks in advance !
Regards.
Click to expand...
Click to collapse
My Cousin Did the Same Exact Thing to his Imate SP3i it also got stuck at 68% it does nothing it was brand new now its paper weight anyway to fix this ?
defcomg said:
My Cousin Did the Same Exact Thing to his Imate SP3i it also got stuck at 68% it does nothing it was brand new now its paper weight anyway to fix this ?
Click to expand...
Click to collapse
Wright me to PM...
Typhoon Service Manual
http://mikechannon.net/PDF Manuals/HTC_Typhoon_Service_manual.pdf
Feeler Service Manual
http://www.mikechannon.net/PDF Manuals/HTC Feelers Service manual_Rev A01.pdf
Jtag Detection
http://hackaday.com/2007/09/29/automatic-jtag-pinout-detection/
defcomg said:
Typhoon Service Manual
http://mikechannon.net/PDF Manuals/HTC_Typhoon_Service_manual.pdf
Feeler Service Manual
http://www.mikechannon.net/PDF Manuals/HTC Feelers Service manual_Rev A01.pdf
Jtag Detection
http://hackaday.com/2007/09/29/automatic-jtag-pinout-detection/
Click to expand...
Click to collapse
For what you want use jtag-pinout-detection? Links on this site are dead, and hear you can find Jtag pins for Typhone: http://forum.xda-developers.com/showthread.php?t=414103