i flashed it with a rom i was trying to make
and now is completly dead
plz i need help how i can fix it
plzzz
can you get into bootloader mode? found this in 1 of the forums!!!
your device maybe salvagable if you can get it into bootloader mode.
Hold down the voice speed dial button and soft reset - you should then enter bootloader mode 'multicolored' screen'
If you do, attach device to pc via usb cable (a small usb will appear bottom left of screen) and flash factory rom. (run rom executable or RUU updater from pc) You do not need to be activesynced to do this.
Before you flash again with a non-factory rom, your device MUST be cid unlocked.
If you cannot enter bootloader mode your bootloader has been damaged and your device will need to be sent away for repair.
dunno if this will help you or not but it worked for me..
Good Luck!
KevandLynds said:
can you get into bootloader mode? found this in 1 of the forums!!!
your device maybe salvagable if you can get it into bootloader mode.
Hold down the voice speed dial button and soft reset - you should then enter bootloader mode 'multicolored' screen'
If you do, attach device to pc via usb cable (a small usb will appear bottom left of screen) and flash factory rom. (run rom executable or RUU updater from pc) You do not need to be activesynced to do this.
Before you flash again with a non-factory rom, your device MUST be cid unlocked.
If you cannot enter bootloader mode your bootloader has been damaged and your device will need to be sent away for repair.
dunno if this will help you or not but it worked for me..
Good Luck!
Click to expand...
Click to collapse
thanx.. i know about the boot loader...
unfortinatly i can't and the problem is mine is o2-xda-orbit and and it's not sold in my country ... i'm really don't know what to do.
maybe htc can fix it ... hopefully
finally problem solved....
i pushed the camera and power bottom together
and then it started with the bootloader
and there was the original shipped rom on the memory and now it's back
I got an HTC/Cingular 8125 from my wife's boss. She bought it back when it came out a couple years ago and stopped using it when she got a newer phone. Theres a password on it that she says she can't remember that blocks all access to the phone. I've tried hard resetting the phone to clear all the memory and to erase the password, but everytime I do, I get stuck in a screen that has a red, green, blue and white bar that are horizontal with the text in white and yellow that says "IPL 1.08" "SPL 1.08"
How do I get past this? How do I successfully hard reset it so that I can erase all the information on it so that I can use this phone since mine is currently broken?
Any and all help will be appreciated.
OK MEN
You need to download your original ROM from your carrier web page.
And in this mode (Bootloaders RGB screen) upgrade your device.
See on wiki there are many original ROMS.
But remember to not use so much your phone in this mode cause if the batt is less than 50% it wont upgrade.... remember that men!!!
and do your upgrade the soon as posible
hope it works for you.
Everytime I plug the device into my computer via USB cable, Windows asks me to type in the password before I can access the device. Is this going to cause problems when upgrading the ROM?
StevenA86 said:
Everytime I plug the device into my computer via USB cable, Windows asks me to type in the password before I can access the device. Is this going to cause problems when upgrading the ROM?
Click to expand...
Click to collapse
No just hold the camera and then soft-reset and youll be in the bootloader from here you can flash your device.
Hi guys,,, just bought myself a X10i to play with,,, figured I,ve flash the thing with a rom from the developers forum,
This is where I came unstuck,,,, cant for the life of me get it into flash mode.
Instructions were as follows
1 With fone OFF. Hold down back button and insert usb cable, green light comes on and hit enter. What bloody enter, on the fone or on your keyboard. I,ve tried both, fone just keeps on booting into the main screen, nothing even resembles a flash mode screen. Tried this untill my thumb nearly bled.
Someone help please.
Read the tuts in the dev forum. P.S. no custom roms yet but there is root.
TrevvyD said:
Hi guys,,, just bought myself a X10i to play with,,, figured I,ve flash the thing with a rom from the developers forum,
This is where I came unstuck,,,, cant for the life of me get it into flash mode.
Instructions were as follows
1 With fone OFF. Hold down back button and insert usb cable, green light comes on and hit enter. What bloody enter, on the fone or on your keyboard. I,ve tried both, fone just keeps on booting into the main screen, nothing even resembles a flash mode screen. Tried this untill my thumb nearly bled.
Someone help please.
Click to expand...
Click to collapse
Try hold down "back button" without battery then insert USB cable and then insert battery.
When it says to hit enter, that is to continue from the screen (on the PC) that says "press any key to continue" when you are doing the steps for rooting. If you don't have that window ready the phone will only stay in flash mode for about 5 seconds and then it will continue to boot. So, just make sure you are ready with the PC before entering flash mode.
Dr_Wolodya said:
Try hold down "back button" without battery then insert USB cable and then insert battery.
Click to expand...
Click to collapse
thanks!!
this really helps!
My phone is also x10i.I have trouble to enter in flash mode.It shows up the green LED but flash tool says it occurs error and plug your phone in flash mode.
What should I do?Help me , plz.
johnmin said:
My phone is also x10i.I have trouble to enter in flash mode.It shows up the green LED but flash tool says it occurs error and plug your phone in flash mode.
What should I do?Help me , plz.
Click to expand...
Click to collapse
check drivers (install SE PC suite and let it atleast detect the phone once in FLASH mode)...
also it might help to disable any antivirus (worked for me)
cannot enter the flash mode
Hi,
I know this post is pretty old, but still I'm struglig the second day now to get into flash mode and still no luck despite trying every method there is on the web.
I've got Xperia X10i mini pro, reinstalled standard ROM with PC companion just to make sure it's nothing with the software or any modifications I made to it.
I'm guiding myself with instruction given here:
wiki.cyanogenmod.com/wiki/Sony_Ericsson_Xperia_Mini_Pro:_Full_Update_Guide
in order to get my bootloader unlocked
what I've done so far:
-installed Android SDK incl. SDK Tools, SDK Platform-tools, Google USB driver package. Not installed any API from SDK.
-put android_winusb.inf (18 KB size) in C:\android-sdk-windows\extras\google\usb_driver
-in general- everyting given here: wiki.cyanogenmod.com/wiki/Howto:_Install_the_Android_SDK#Windows
command
Code:
adb devices
rerurns
Code:
List of devices attached
43423531315537465737 device
in my opinion meaning it works as it should.
So I turn the phone off, unplug the cable both from computer and the phone, take the abttery out, plug both end of USB cable where these should be, hold the Back button (tried with Volume up too) and put the battery in.
The result is it only goes into flash mode for several seconds (confirmed by SuperOneClisk log) and then goes into charging mode. nothing gets displayed on the screen. Only when PC Companion is on it detects it, than looses it and pops up with a window on how to properly connect the device... :/
So can someone please tell me what I do wrong?
Why it doesn't stay in flash mode?
PS. when I enter *#*#7378423#*#* to access the service menu, after pressing the last * the numbers just disappear and nothing happens...
Pls help
Edit:
I somehow got around that with s1tool and Flashtool. But eventually I could not go along the way given at cyanogenmod.com and unlocked with the help of this: http://forum.xda-developers.com/showthread.php?t=1254225
Hi all,
My UK O2 HD Mini is no longer recognised via any usb connection.
Mobile device center cannot see the phone, and even in bootloader mode the device is not recognised, I have tried several cables and computers.
My question is.
Is there any way to flash the phone from the sd card, so I can reflash the original o2 rom, before returning it for repair under warranty?
Thanks in advance for any help.
Success I found the answer.
Rename the the flash file to photimg.nbh, with power off insert sd card into phone, hold vol down and press the power button.
Phone goes into bootloader, then the flash screen. Follow the onscreen instructions.
Edit: Sorry, after reading it the second time, I realised I misunderstood....
Hi. I had a pin unlock for my phone. I forgot it and entered it too many times. Now it wants me to unlock via my google account which is totally fine...but my phone wasn't connected to WiFi or mobile data wasn't enabled.
So even though I enter the correct details the phone cannot verify them!
I went unto Android device manager and tried to reset the lock screen but it failed to work.
I don't want to do a factory reset as I have not got some recent (and really quite important!) photos backed up! What do I do?
I tried to use a USB cord connected to my phone and PC but because the phone is locked only sleep and charge works.
Please help! Gracias