Android 10 and up AC8257 mcu stm32 vertical screen firmware need - Android Head-Units

Hi all
ive been reading and looking for a while a firmware based on this unit but ive been unsuccessful. Ive found various firmwares out there, but all are for landscape units.
If someone has or know where i can find a firmware for this unit, please let me know. i tried pda, and various threads(xy, px6, etc) in this forum and found nothing worked cause even though those firmware are base on ac8257, the MCU is different. Some has the correct cpu and mcu but are for horizontal or landscape unit.
i tried to modify the screen orientation via adb and ro.sf.hwrotation, but it doesn't work on latest android . There is another methode editing and xml file, but it looks too complicated for me .
The unit is 4-64gb 768x1024 resolution.
HARDWARE info b200 core 8
Thanks in advance

papachaca said:
Hi all
ive been reading and looking for a while a firmware based on this unit but ive been unsuccessful. Ive found various firmwares out there, but all are for landscape units.
If someone has or know where i can find a firmware for this unit, please let me know. i tried pda, and various threads(xy, px6, etc) in this forum and found nothing worked cause even though those firmware are base on ac8257, the MCU is different. Some has the correct cpu and mcu but are for horizontal or landscape unit.
i tried to modify the screen orientation via adb and ro.sf.hwrotation, but it doesn't work on latest android . There is another methode editing and xml file, but it looks too complicated for me .
The unit is 4-64gb 768x1024 resolution.
HARDWARE info b200 core 8
Thanks in advance
Click to expand...
Click to collapse
Post Android system information including MCU version screen shots, just to be sure.

marchnz said:
Post Android system information including MCU version screen shots, just to be sure.
Click to expand...
Click to collapse
Its a STM32 MCU SYSTEM BASE ON AC8257
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

Related

Pumpkin 12-C0252-US-A

Hi guys,
I just installed a Pumpkin 12-C0252-US-A, and need some help figuring out upgrading the firmware. The about screen gives me the following info:
Build # Alex5701_V1.19
TFT: 5701-2015928-154740-V01
MCU: 5701-20150930-083502-V01
Which leads me to believe this is an AL-5701 / AL-C0241, which has a page on the Wiki, along with a link to the MCU and firmware files. I'd like to put Malaysk's firmware on, so my question is, will the MCU file for the AL-5701 / AL-C0241 from the wiki, and Malaysk's RK3188 1024X600 firmware from 18 October, 2015 work together properly? Malaysk's firmware post has a link to a MCU post, but all the MCUs there have letters for versions, rather than numbers (like 5701), so I'm worried that the two files won't be compatible.
Any help would be appreciated, thanks!
The Malaysk's firmware do not suitable for the item you bought, if any problem with the radio system, you may contact the seller to get the firmware for your unit. I asssume the seller should be Pumpkin, right?
wrathful said:
Hi guys,
I just installed a Pumpkin 12-C0252-US-A, and need some help figuring out upgrading the firmware. The about screen gives me the following info:
Build # Alex5701_V1.19
TFT: 5701-2015928-154740-V01
MCU: 5701-20150930-083502-V01
Which leads me to believe this is an AL-5701 / AL-C0241, which has a page on the Wiki, along with a link to the MCU and firmware files. I'd like to put Malaysk's firmware on, so my question is, will the MCU file for the AL-5701 / AL-C0241 from the wiki, and Malaysk's RK3188 1024X600 firmware from 18 October, 2015 work together properly? Malaysk's firmware post has a link to a MCU post, but all the MCUs there have letters for versions, rather than numbers (like 5701), so I'm worried that the two files won't be compatible.
Any help would be appreciated, thanks!
Click to expand...
Click to collapse
I just installed one of these Pumkin C0252 im suprised how good it is only
Problem is the radio app doesn't work and im getting no help from the ebay seller dies yours have the radio apk with it?
srfairhurst said:
I just installed one of these Pumkin C0252 im suprised how good it is only
Problem is the radio app doesn't work and im getting no help from the ebay seller dies yours have the radio apk with it?
Click to expand...
Click to collapse
Hi There
I've heard about that, their radio app have issue with the system date. If you swtich to year 2015, then it will work without problem. But right now, they already released new radio app, you may can download from the following link and install to replace the old app by ESbrowser. Check attached photo!
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
https://mega.nz/#!tZlk1BIL!rtJ6O4p-PtMoazqYIFtVaD9oHfcxoAx2K7ybZIKwqIc
Wish you luck!

HiZPO head unit Quad Core Android 5.1

I just bought a chinese Android head unit off ebay.
http://www.ebay.com/itm/332060332923
I came here for some tips but it looks like the MCU that is on the unit is a different variant than the MTC* that XDA mentions.
The MCU that is listed on the unit is SM92B1.161111.V1-CYD-B3.
Is anyone familiar with this? I would love to get this thing modded a bit.
If it helps any, the splash screen when starting up is HIZPO.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
I have the same hizpo radio, and cannot seem to change the led light color. It always stays red no matter what I do
does anyone have a copy of the stock firmware??
I am also looking for a firmware update. Can anyone point to a website? I have searched with no success
piersol said:
I have the same hizpo radio, and cannot seem to change the led light color. It always stays red no matter what I do
Click to expand...
Click to collapse
Its similiar to my HU
I have an unbranded chinesse HU for my toyota. From keshangda electronics, the type of my HU KSD-JC6916B with MCU SM92E1, and the light setting it doesnt work too.. Always on red color. does anyone have update firmware?
Android version is 5.1.1 (i think is fake) because all file system is 4.4.2 kitkat
Sory for my bad english ...
Dapelaas said:
Its similiar to my HU
I have an unbranded chinesse HU for my toyota. From keshangda electronics, the type of my HU KSD-JC6916B with MCU SM92E1, and the light setting it doesnt work too.. Always on red color. does anyone have update firmware?
Android version is 5.1.1 (i think is fake) because all file system is 4.4.2 kitkat
Sory for my bad english ...
Click to expand...
Click to collapse
I called the seller and they confirmed that there is only one color LED. this unit sucks and lacks features. next time around I'll pay a little more for a bit more known head unit.
Sent from my SM-N950U using Tapatalk
Logging into the admin menu using password 12580 and you can change your LED colour. (Y)

UIS 7862 & AYI mcu questions

Update: so i tried my luck and updated my headunit MCU, and luckily everything went smooth & good
but nothing have changed in canbus settings. Anyway I'll attach that working mcu for IYING headunits.
Hey there,
I've bought an after-market screen for my MG HS in the package of "joying" but after inspection i've found that it has an mcu of a company named "AYI" with same specs of joying screens. I've found it when flashing FW upgrade of joying and a yellow bar showed that fw and mcu does not match
For instance, most of my car settings through screen works good (like AC and rear cam, locking srttings) but i miss lots of other settings from my original screen like ambient light settings and trunk opening degree ... etc
I've flashed a custom rooted rom from 4pda for 7862 and it works flawlessly, also i've found mcu that should work for AYI but still afraid to flash it to avoid hard-bricking my device ... finally these are my questions:
Does MCU upgrading can affect settings for car canbus that is showing in factory settings menu [ATTACH type="full"]5386565[/ATTACH]
Could anyone assure that my screen's mcu belongs to AYI
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Finally, my screen is allegedly running Android 10 with 6gb of ram
Sorry for my bad english
Before flashing another compatible FYT firmware to your model, you should have changed the [ro.build.fytmanufacturer]: [43] to the value of your manufacturer. That is described multiple times here and on 4pda.
That causes the yellow bar and some of the settings not working correctly.
If you still have your old firmware, then check that value and modfy your Joying firmware before flashing.
surfer63 said:
Before flashing another compatible FYT firmware to your model, you should have changed the [ro.build.fytmanufacturer]: [43] to the value of your manufacturer. That is described multiple times here and on 4pda.
That causes the yellow bar and some of the settings not working correctly.
If you still have your old firmware, then check that value and modfy your Joying firmware before flashing.
Click to expand...
Click to collapse
I've solved this problem already but i used this code in the config file of the rooted & modded firmware:
FYT = 31 ro.build.fytmanufacturer = 31 MCU AYI IYING DATONG TECHNOLOGY ANTWING
thanks anyway ❤
updated my mcu and here's the new mcu info
my screen is called IYING
I have problem on UIS 7862 & AYI mcu too. I'm flashing FW upgrade of joying and a yellow bar showed.
I tried to change ro.build.fytmanufacturer = 31 but it stuck at google logo.
Can you help me?
do we have an update MCU version ???

Please help mi identify hardware - Uckazy 8259l HU (Alps 825x_pro) for bmw e70

Hi,
I am so confused, and would really appreciate help. I read numerous threads and comments, but not able to understand the unit i have.
I bought on aliexpress Uckazy 8259l model for bmw e70, which seems to be Alps 825x_pro according to CPUZ.
Unit so far is working ok, expect for really bad internet speed (mobile hotspot even tho i have fast internet on my phone), audio buzzing on AUX and random reboots when multiple apps are running (not frequent).
I used CPUZ (that always crashes after 10 seconds) and Inware to get these specs:
Brand: Alps
Product: full_825x_Pro
Model: 825x_pro
Resolution: 1920*720 (aliexpress specs states 1280*480)
Size: 12.82" (aliexpress specs states 10.25")
Hardware: AC8257V/WAB ( i was hoping it is 8259 as model name suggests)
Ram: 6gb, ROM: 128gb
Android 11, API 30
Needles to say, aliexpress seller support equals zero. No communication except sending user manual.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
I am hoping someone can help me figure out the following:
is this Mediatek, Snapdragon, PX, somethinge else?
Is Alps known Chinese manufacturer that others just rebrand? Is this unit same as JunSun V1? - hoping to understand this, so i can focus on existing threads on XDA
Is the firmware the latest - not sure how to check and which can i use in case upgrade is needed (e.g. can i use JunSun firmware)
CPUZ says it is API 30, did developers do something to fake it or i can be sure i have android 11 unit?
Should i trust screen resolution that CPUZ and Inware are displaying or could this be incorrect info?
I aim to change launcher, and add custom boot animation/logo, but want to understand specs first
Thank you in advance for your help!
.
Does anyone can help us ? Thanks for advice
nowaq111 said:
I aim to change launcher, and add custom boot animation/logo
Click to expand...
Click to collapse
built-in root
Диск
files.sberdisk.ru
The firmware has not been verified and is used at your own risk
I do not bear responsibility for the bricks!!!
Wanna know more about this, please let us know if firmware fits good on unit.
xh4fk said:
Wanna know more about this, please let us know if firmware fits good on unit.
Click to expand...
Click to collapse
What size is it

MCU: XRC --> which head unit?

hello all, I'm a bit frustrated since I searched all over and could not find out what type of head unit I have, my MCU says:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
anyone has a clue how to upgrade etc.? thx a lot! best
I have a similar device for bmw f10. I have an MCU update (4 + 128 is an update of the device itself, here you need to know your parameters) and there is an OS, it's just an update of the android system here on the forum there is version 1.94, I have 1.97 (it allows you to enable the ID8 interface)
It's an odd ball unusual chinese origin headunit...
AlekseyFZ said:
I have a similar device for bmw f10. I have an MCU update (4 + 128 is an update of the device itself, here you need to know your parameters) and there is an OS, it's just an update of the android system here on the forum there is version 1.94, I have 1.97 (it allows you to enable the ID8 interface)
Click to expand...
Click to collapse
thank you. I have a 4+64 device.
It seems like 1.94 is not stable. Did you install 1.97 and it worked? Could you send me an information about the seller so I can get in contact? thx a lot
hallodu62 said:
thank you. I have a 4+64 device.
It seems like 1.94 is not stable. Did you install 1.97 and it worked? Could you send me an information about the seller so I can get in contact? thx a lot
Click to expand...
Click to collapse
https://aliexpress.ru/item/1005003945642155.html?spm=a2g2w.orderdetail.0.0.35a64aa69sy3Xv&sku_id=12000028669768032э
here is the link from whom I bought from, as I understand it, the OS update for these devices is almost the same for all of them, the only difference is the MCU. The seller just sent me the wrong update for the MCU (sent 4 + 128, and I have 8 + 128) and now 4gb works for me instead of 8gb. so I'm looking for someone who has an MCU XRC 8 + 128
ZLH_ID8_OS_8581_1.97 ONLY FOR BMW !!!! MCU: XRC and ZLH (I have MCU XRC everything works well, I did not check it on ZLH)
https://drive.google.com/file/d/1dw2PwO3Kfwk5V33QF7fNyi0dKOAKAmIL/view?usp=share_link
ID7 and ID8 switchable in BMW setup menu
ok, thank you!

Categories

Resources