Database Users

Eonon GA6150 BlueTooth question

Hello xda people!
I recently purchased an eonon head unit for my E46 316i from ebay. Specifically a GA6150 (rk3188), which was sold together with a reverse camera.
I am really happy with my order, and pleased with the HU's performance. I managed to connect succesfully my OBD adapter, my bluetooth phone and my wifi hotspot and all is working great.!
Although, I found out something which bothers me. I have purchased a Bluetooth RGB LED controller from ebay, in order to DIY install some LEDs in the interior of the car, and I wanted to control them from my eonon android HU. I can control them through my S7 Edge Android phone via the app called Happy Lighting. I have found out that the manufacturer of these controllers is called Triones. So my problem is, that when I open the app, it asks me to turn on the bluetooth, and allows me to press one of two buttons, allow and deny. If I press allow, a message will appear saying: "Turning on Bluetooth" or something like that, with a spinning wheel, indefinately. It will not stop and it will stay like this all the time, making the app useless, making me press home button to exit. All this happens, even though I know that bluetooth is actually on (I havent yet found an on/off switch for Bluetooth, so I suppose it is always on). If I press deny, then I can enter the app, but I am not able to see any of the bluetooth controllers, is there any way, to make the app think that the bluetooth is on? Or actually turn it off or anything? Would you please help me figure out what should I do? And one last question, is how can I change my screen orientation from landscape to portrait?
I will attach a photo of the details for the version of my Head Unit.
This is the link of the HU I purchased from ebay: http://r.ebay.com/aegMSa
And this is the link to the controller: http://r.ebay.com/aDfflI
While this is the app: https://play.google.com/store/apps/details?id=com.qh.Happylightgoogle&hl=en
Thank you very mych for your time!

Yep had 3 Paypal disputes with Eonon about that issue a year ago on a MTCB unit, I would imagine it would be the same with the MTCD
I think they route all Bluetooth information through the MCU and use non standard configuration of their Bluetooth drivers. So applications that ask to turn the BT on cannot as it is not configured that way.
This is something they were not willing to fix or were unable to.
Sent from my iPhone using Tapatalk

First of all thank you for your reply, i really appreciate it.!
Second, damn it. Damn them! That is really frustrating, i've managed to find a bit more info digging around here and in russian forums. It's sad that i cannot use anything else via bluetooth other than a few OBD adapters and my phone..
I will shortly contact Eonon for my MCU update file and see if anything can be done there. Otherwise, i will see if anything can be fixed via a custom rom and xposed stuff.
P.S.: If there was any other android HU that could support full BT, i would gladly return my Eonon and buy that instead..

DeejayTelis said:
First of all thank you for your reply, i really appreciate it.!
Second, damn it. Damn them! That is really frustrating, i've managed to find a bit more info digging around here and in russian forums. It's sad that i cannot use anything else via bluetooth other than a few OBD adapters and my phone..
I will shortly contact Eonon for my MCU update file and see if anything can be done there. Otherwise, i will see if anything can be fixed via a custom rom and xposed stuff.
P.S.: If there was any other android HU that could support full BT, i would gladly return my Eonon and buy that instead..
Click to expand...
Click to collapse
Joying intel Sofia units is a bit better with the BT, but do some research first.
Good luck with Eonon
From memory it to do with kernel drivers and BT stack and they would not fix
Also be careful with Eonon and returns, additionally PayPal protection does not cover car audio products.
Sent from my iPhone using Tapatalk

shanetrainST said:
Joying intel Sofia units is a bit better with the BT, but do some research first.
Good luck with Eonon
From memory it to do with kernel drivers and BT stack and they would not fix
Also be careful with Eonon and returns, additionally PayPal protection does not cover car audio products.
Sent from my iPhone using Tapatalk
Click to expand...
Click to collapse
Digging up an old thread
I would like to connect bluetooth accessories to my eonon new android 10 head unit (2020) - the above looks familiar as i cannot seem to 'find' the devices when searched for using the strange bluetooth 'app'.
Is there anything that can be done? I'd like to add a bluetooth remote (alternatiev to steering wheel controls) - but its not detected by the HU

Unknown Joying head unit and question to the volume (3rd Party)

Hello,
I do not know what a head unit I have (MTCD, MTCE, Rockchip or something completely different)
In the settings is only PX5
it`s a
EU-JY-UOS01N4PX5S 4GB Ram/ 64GB Rom with Android 8.1.0
Kernel 4.4.103
[email protected] #37
Build
OPR5.170623.007 release-keys-V5.1
Prozessor
8 core 64bit CPU [email protected],5G
App Version
TP6735D 0.0.125
MCU Version
TP6735D 0.43
and I still have the problem that I can change the volume with no external software
e.g. CarWebGuru or Volume Control Apps
many thanks for your help

Scheitig said:
[email protected] #37
Click to expand...
Click to collapse
This is an stt-tec unit, or in other words a QD unit.
Scheitig said:
and I still have the problem that I can change the volume with no external software
e.g. CarWebGuru or Volume Control Apps
Click to expand...
Click to collapse
What do you mean?
You can, or cannot change the volume with external software? And if you can: what is the question?
If you can't change the volume with for example carwebguru, you have to know you do that as "secondary" setting.
If the joying is set on 4 (from 1 to 20), your secondary volume setting is aroun that volume, most probably not below 3 or above 5.
Please note that almost all units have an analog volume. Carwebguru and others use the digital output like in phones.

excuse my bad English;
come from Germany and use the Google Translator
I can not change volume with 3rd party software no matter which one I use. It works only with the touch keys or the button in the status bar

Scheitig said:
excuse my bad English;
come from Germany and use the Google Translator
I can not change volume with 3rd party software no matter which one I use. It works only with the touch keys or the button in the status bar
Click to expand...
Click to collapse
that is a common problem with every android headunit.
You need to reroute the buttons.
For this you need to root the unit.
As this unit, and mine by the way, are QD units there is a way to root it!
See here: https://forum.xda-developers.com/showpost.php?p=78207536&postcount=271
TO make the headunit run the update, i had to put the QD image from joying website (with the modifications added) to usb and gps-card at the same time. Then i ran the update from system settings!
May it help you.
Still i dont know how to reroute my keys, since its not a mtcd unit.
If anyone can help, please do so!
Please have a look for your Equalizer app. is it DSP or old school?

hashtowent said:
that is a common problem with every android headunit.
You need to reroute the buttons.
For this you need to root the unit.
As this unit, and mine by the way, are QD units there is a way to root it!
See here: https://forum.xda-developers.com/showpost.php?p=78207536&postcount=271
TO make the headunit run the update, i had to put the QD image from joying website (with the modifications added) to usb and gps-card at the same time. Then i ran the update from system settings!
May it help you.
Still i dont know how to reroute my keys, since its not a mtcd unit.
If anyone can help, please do so!
Please have a look for your Equalizer app. is it DSP or old school?
Click to expand...
Click to collapse
i have the same issue, i tried to solve it with a external usb HID volume knob with no luck!!! Xposed with mtcd utils dont install.

surfer63 said:
This is an stt-tec unit, or in other words a QD unit.
What do you mean?
You can, or cannot change the volume with external software? And if you can: what is the question?
If you can't change the volume with for example carwebguru, you have to know you do that as "secondary" setting.
If the joying is set on 4 (from 1 to 20), your secondary volume setting is aroun that volume, most probably not below 3 or above 5.
Please note that almost all units have an analog volume. Carwebguru and others use the digital output like in phones.
Click to expand...
Click to collapse
Hi, i got the exact same head unit. May i know how do i root this head unit? The current android version is 8.1. Thanks

Steering Wheel Control buttons
Hello, I have a joying HU running Cortex A53
Android 8.1 PX5
MCU: TP6735D 0.43
I am not able to control skip and back funtion with SWC in 3rd party apps like spotify or poweramp., volume buttons work, all other buttons work on native music apps. Is there an app like mtcd tools that can help? Thanks for your time.

Mitsubishi Outlander 2gen (2010-2012) with rockfordfossgate w/sub MMCS w/rear cam

Hi
I have a Mitsubishi outlander 2011 with rockfordfossgate MMCS system and rear view cam.
I have now installed a Dasaita PX5 Octa Core 64 bit 4gb Ram 32 G rom with Android 8.0 I am currentely using Hal9K rom version 3.1.2 works great
I have got everything working, rear view camera (had to solder a bit to get the original camera to work.)
All speakers with sub working, with the original amplifier.
But i can't fade/balance speakers, don't know if thats posible to fix?
Tone controll working fine.
But i am missing some featurers, I am not sure if it is possible to get it to work?
In my MMCS unit i had the opportunity to change car settings "see attachments".
Like how the wipers shall act and things like that.
I also hade speed signal and fule consumption information.
Not sure if the canbus for my dasaita support this?
In the factorysettings on my dasaita i have choosen canbus (111 Mitsubishi pajero&outlander%asx&lancer(simple)
Steering whell controlls working fine, when i put the car in revers i get the rearview camera and that is working fine.
I have see people talking about car_info app, vehicle.apk and controllinfo apps, this are apps working in the background like the rearview camera app right?.
But i get no icons for this apps on my head unit, and nothing in extra menu or car setting menu.
I do not get any signal when opening doors og changing temperatur on the AC and things like that.
So my question is simple, is there any way for me on my car to get the opertunity to change the settings link a was able to do in the original MMCS unit?
In the MMCS hadde an "equpment" meny, that i do not have now. I also like for information like speed signal, doors opening and things like that be poping up on the unit.
Or is this settning for the equipment and speed signa, doors just not supportet with my canbus decoder?
Is there any other way to get to this equpment setting in my car without installing the original MMCS unit?
Mayby with ODB2 or something like that?

knutmw said:
Hi
I have a Mitsubishi outlander 2011 with rockfordfossgate MMCS system and rear view cam.
I have now installed a Dasaita PX5 Octa Core 64 bit 4gb Ram 32 G rom with Android 8.0 I am currentely using Hal9K rom version 3.1.2 works great
I have got everything working, rear view camera (had to solder a bit to get the original camera to work.)
All speakers with sub working, with the original amplifier.
But i can't fade/balance speakers, don't know if thats posible to fix?
Tone controll working fine.
But i am missing some featurers, I am not sure if it is possible to get it to work?
In my MMCS unit i had the opportunity to change car settings "see attachments".
Like how the wipers shall act and things like that.
I also hade speed signal and fule consumption information.
Not sure if the canbus for my dasaita support this?
In the factorysettings on my dasaita i have choosen canbus (111 Mitsubishi pajero&outlander%asx&lancer(simple)
Steering whell controlls working fine, when i put the car in revers i get the rearview camera and that is working fine.
I have see people talking about car_info app, vehicle.apk and controllinfo apps, this are apps working in the background like the rearview camera app right?.
But i get no icons for this apps on my head unit, and nothing in extra menu or car setting menu.
I do not get any signal when opening doors og changing temperatur on the AC and things like that.
So my question is simple, is there any way for me on my car to get the opertunity to change the settings link a was able to do in the original MMCS unit?
In the MMCS hadde an "equpment" meny, that i do not have now. I also like for information like speed signal, doors opening and things like that be poping up on the unit.
Or is this settning for the equipment and speed signa, doors just not supportet with my canbus decoder?
Is there any other way to get to this equpment setting in my car without installing the original MMCS unit?
Mayby with ODB2 or something like that?
Click to expand...
Click to collapse
Where u able to figure any of this out?
Sent from my SM-G975U1 using Tapatalk

I have 2008 Pajero Exceed.. whilst older than yours.
It doesn't have the extra menu controls you're also missing
I was looking at a system fully installed Extnix $600
But didn't follow through.
They advised me everything would work including amp -EXCEPT the fade/balance, so it might be a bit more embedded into the Mitsubishi system and missing from alternative head units ?

I'm really interested for this topic. I have a Mitsubishi Outlander and it would be great if I could still have stock MMCS settings on an aftermarket android unit.

nickgrserifos said:
and it would be great if I could still have stock MMCS settings on an aftermarket android unit.
Click to expand...
Click to collapse
What do you mean "stock MMCS settings"

kiwi-oz said:
What do you mean "stock MMCS settings"
Click to expand...
Click to collapse
Mitsubishi Multi Communication System.

nickgrserifos said:
Mitsubishi Multi Communication System.
Click to expand...
Click to collapse
What do you mean
"Stock Mitsubishi Multi Communication System settings on an Android unit"
You wrote it
I know what MMCS is

@nickgrserifos
Do you currently have a GPS unit ? (MMCS)

kiwi-oz said:
@nickgrserifos
Do you currently have a GPS unit ? (MMCS)
Click to expand...
Click to collapse
Yes, I do have a gps unit. But if I install an aftermarket android unit I will loose all stock mitsubishi car settings like remote car pre-heating, consumption information as well as other important car settings .

nickgrserifos said:
Yes, I do have a gps unit. But if I install an aftermarket android unit I will loose all stock mitsubishi car settings like remote car pre-heating, consumption information as well as other important car settings .
Click to expand...
Click to collapse
aaaah Ok... Pajero Exceed 2008 MMCS doesn't integrate any car functions (just Bluetooth)

kiwi-oz said:
aaaah Ok... Pajero Exceed 2008 MMCS doesn't integrate any car functions (just Bluetooth)
Click to expand...
Click to collapse
Yeah my bad I didn't clarify that from the beginning. I have a 2015 Outlander PHEV.

Menu on HMI is not there

Hello folks.
I hope someone can help me.
I installed the Junsun v1 pro in my BMW E91.
where can I find the menu for Car Infotainment or the gear wheel for Device HMI?
it is nowhere to be found. I'll go crazy.
thank you for your help

SeiteBallon74 said:
Hello folks.
I hope someone can help me.
I installed the Junsun v1 pro in my BMW E91.
where can I find the menu for Car Infotainment or the gear wheel for Device HMI?
it is nowhere to be found. I'll go crazy.
thank you for your help
Click to expand...
Click to collapse
As this is quite car dependent, you should get in contact with the seller.

rigattoni said:
As this is quite car dependent, you should get in contact with the seller.
Click to expand...
Click to collapse
Thanks for the answer.
but why should it be car dependent? isn't it software dependent?
All of them come with a menu where you can set the FM radio (because it is noisy) or the settings for the rear view camera, constant slight flickering and only NTSC/PAL resolution, although HD resolution should be.

SeiteBallon74 said:
Thanks for the answer.
but why should it be car dependent? isn't it software dependent?
All of them come with a menu where you can set the FM radio (because it is noisy) or the settings for the rear view camera, constant slight flickering and only NTSC/PAL resolution, although HD resolution should be.
Click to expand...
Click to collapse
No, this menu is car dependant.
May be wrong settings in the CAN menu, but the seller should tell you the right settings.

rigattoni said:
No, this menu is car dependant.
May be wrong settings in the CAN menu, but the seller should tell you the right settings.
Click to expand...
Click to collapse
in order. I can't imagine that it depends on the car and shouldn't be there with my car, but okay.
do you think it could be a canbus problem?
my canbus in the car is working properly.
there is no support from the seller.
I will never buy anything from Junsun again

SeiteBallon74 said:
in order. I can't imagine that it depends on the car and shouldn't be there with my car, but okay.
do you think it could be a canbus problem?
my canbus in the car is working properly.
there is no support from the seller.
I will never buy anything from Junsun again
Click to expand...
Click to collapse
Your unit has an own Can-Adaptor to translate the signals in the CAN to the ones the head unit needs.
If in the settings of the unit has been chosen the wrong car, you may run into such things.
Even if the right car has been set, try the others around the correct one.
If you don´t get support, send it back. Just that easy.

rigattoni said:
Your unit has an own Can-Adaptor to translate the signals in the CAN to the ones the head unit needs.
If in the settings of the unit has been chosen the wrong car, you may run into such things.
Even if the right car has been set, try the others around the correct one.
If you don´t get support, send it back. Just that easy.
Click to expand...
Click to collapse
OK I understand that.
I would have liked to have sent it back, but unfortunately a pin on the radio broke off so that I can no longer return it.
It was bought from AliExpress
any idea what i could do now?

JUNSUN V1 PRO UIS 8581A (TS18) - SW key change with CANBUS decoder plugged in

Hello everyone, it's been a while in this forum .
I recently purchased a unit from Junsun with processor UIS 8581A (this was not provided in the add) and started to play with the unit on my SEAT Ibiza 2011 (09-2013)
I noticed that the steering wheel commands are connected through the CANBUS decoder unit from Simplesoft and I am unable to change the keys.
Furthermore I am stuck in a carousel of commands for "MODE" key on the steering wheel tat swaps through NAVI>MUSIC>VIDEO>AUXIN>BT>Ipod and i think something else ) and I only need NAVI and MUSIC.
Details regarding unit:
Platform information TS18
CPU UIS8581A (8CORTEX a55 @1.6GHZ), 4Gb Ram
GPU dual core Mali G-52 3EE
Sound processor AK7604
Radio module TDA7708
Bluetooth 5.0
CAN VERSION:V3.88.139BYPS
MCU VERSION:TS18.1.1
SYSTEM VERSION;TS18.2.2 (20220629)
ANDROID VERSION 11.0
I would like to ask for help for these Issues, questions:
1. Is there any way to change the "Mode" function on the steering wheel control (canbus decoder connected) to only carousel for specific apps.
2. Can I change the default music app to let's say Youtube music?
3. How to change control keys on steering wheel with CANBUS decoder connected? And if it's not possible is there a way without the CANBUS decoder connected, what are the downsides if this can occur?
4. I saw that there is a very big thread on another forum about these units but not here :-? why? (I live in europe and my unit came from Poland)
I searched the forum and tried SWC car switcher app, and some others but the buttons from steering wheel had the highest priority either way :-(
Thank you and sorry for the TLDR!

bump

tazere said:
I searched the forum and tried SWC car switcher app, and some others but the buttons from steering wheel had the highest priority either way :-(
Thank you and sorry for the TLDR!
Click to expand...
Click to collapse
Some people disabled the standard SWC mode key by removing all apps from factory settings and use it for AppSwitcher:
Post in thread 'AppSwitcher - smart SWC launcher (for Junsun and similar devices) incl. autostart' https://forum.xda-developers.com/t/...-devices-incl-autostart.4435555/post-87531251
Another approach is to check if the SWC of Seat Ibiza is a resistance matrix and the connections are exposed to the wiring harness.

TorstenH said:
Some people disabled the standard SWC mode key by removing all apps from factory settings and use it for AppSwitcher:
Post in thread 'AppSwitcher - smart SWC launcher (for Junsun and similar devices) incl. autostart' https://forum.xda-developers.com/t/...-devices-incl-autostart.4435555/post-87531251
Another approach is to check if the SWC of Seat Ibiza is a resistance matrix and the connections are exposed to the wiring harness.
Click to expand...
Click to collapse
Hi Torsten and thank you for the reply, I tried to remove the apps but unfortunately my factory settings doesn't have that option on TS 18 platform tried with 8878 like in the link you posted :-(. Thank you anyway