Related
UPDATE 3: I've got it back to as stock as I can get it. I think I'm going to just return it and get a new one. Thank you all for your help.
UPDATE 2: As of right now, I'd like to completely remove FFF from the device, but I can only use fastboot to do it. I have absolutely no adb access. Is there a way?
UPDATE: Here is a video showing what is happening to my KF: http://www.youtube.com/watch?v=MH6oUg1NmC0
I hate to start another thread about boot loops/bricking, but I'm not sure what's going on with my fire.
I had CM7 installed successfully since the day after Christmas. This morning I woke up and my Fire was being really sluggish, so I rebooted it (I did not select reboot into recovery).
After it powered on, I was stuck at the CM7 boot screen (with the skateboarding android). I let it sit, but no luck. I went into TWRP to try and restore the backup I made of the stock rom. It looked successful, but when I rebooted I was stuck at the Kindle Fire boot screen.
Next, I tried wiping the device and re-installing CM7, but I received an error (something along the lines of E:Error unable to find /tmp/sideload/blahblah).
So I again restored my backup of the stock rom. Now when I power on my Fire I see the yellow triangle, then the kindle fire logo, yellow triangle, kindle fire logo, and it just keeps repeating. The problem is I am unable to connect to adb because the PC only seems to recognize the adb device for a few seconds after the yellow triangle, which does not give me enough time to fix the problem.
Any ideas?
looks like you'r out of battery ! the kf is rebooting !
would take the wall charger and charge for an hour
it's not possible to charge with the computer - it lasts forever
then it should respond in a stable state
b63 said:
looks like you'r out of battery ! the kf is rebooting !
would take the wall charger and charge for an hour
it's not possible to charge with the computer - it lasts forever
then it should respond in a stable state
Click to expand...
Click to collapse
Recovery shows my battery level to be at 53%. I've got it on the charger now, but I have a feeling there is something else going on.
Also, I am unable to mount my Fire's SD to my computer in recovery. It looks like it is working, but my computer never acknowledges it.
maybe because your last installation failed
nevertheless i would try to charge and then go in twrp and retry the installation
if that's not sucessful i would try to switch the kf to fastboot and copy a new rom. stock or prerooted stock or cm7 - whatever you like
in twrp there is a point "mount" - sdcard - then you should get it from computer
b63 said:
maybe because your last installation failed
nevertheless i would try to charge and then go in twrp and retry the installation
if that's not sucessful i would try to switch the kf to fastboot and copy a new rom. stock or prerooted stock or cm7 - whatever you like
in twrp there is a point "mount" - sdcard - then you should get it from computer
Click to expand...
Click to collapse
Thanks for the reply. Is adb required to get into fastboot? The problem is that I am unable to get into adb because my computer only sees the Fire for about 1 second. When I go into device manager, I don't see it at all.
EDIT: Yeah, I see the mount in TWRP, but it does not do anything when I select it.
Hi Im a beginner but Id like to try to help :
In case you become desperate ignore twrp's battery display and try wall charger.
Anorher idea id have is to shut down throughr twrp and start up then instead of rebooting.
ADB is needed to get into fastboot, but it's quick. If you use KFU, you can probably hit the option during the couple seconds you have available. I would say your best bet, however, is booting into twrp, doing a full wipe of system, cache, davlik cache, and maybe data, and then trying the rom install again.
skourg3 said:
ADB is needed to get into fastboot, but it's quick. If you use KFU, you can probably hit the option during the couple seconds you have available. I would say your best bet, however, is booting into twrp, doing a full wipe of system, cache, davlik cache, and maybe data, and then trying the rom install again.
Click to expand...
Click to collapse
So this time it looks like the installation worked in TWRP, but after reboot now I'm stuck at the CM7 boot screen. This is at least some progress, so when I get home I'll see what I can do.
Sent via my internet connected mobile cellular telephone.
Well, the battery is definitely not the issue. I've been trying to get fastboot, but the problem is the fact that I can not get adb. Has anyone else had issues with getting adb? I've already tried to install the drivers, and that doesn't work.
EDIT: I've tried issuing "adb devices" from the command prompt repeatedly as soon as I hear the ding until it disconnects a second later, but still I have had no luck.
Also, I found this thread in which someone else appears to have had a similar issue to mine.
[Q] New kind of unfixable Super Brick?
at the moment adb is useless - you should try to get the device in fastboot mode - correctly recognised from your computer - then work with fastboot commands - if you don't get that then your next opinion is buying or making a factory cable - but we should try to avoid that ...
b63 said:
at the moment adb is useless - you should try to get the device in fastboot mode - correctly recognised from your computer - then work with fastboot commands - if you don't get that then your next opinion is buying or making a factory cable - but we should try to avoid that ...
Click to expand...
Click to collapse
I can not seem to get fastboot to work either. Does fastboot rely on adb? Or do you just run the .exe file? I tried to run it, and nothing happened.
fastboot has nothing to do with adb - calling just the exe does nothing -
you have to issue fastboot commands
ok have reread the whole thread and have some ideas:
your currently stuck at the cm7 boot screen ?
have you used the "stock rom version" to wipe data and cache partitions as described here ?
http://forum.xda-developers.com/showthread.php?t=1390773
perhaps it will help to wipe data/cache with twrp ...
b63 said:
fastboot has nothing to do with adb - calling just the exe does nothing -
you have to issue fastboot commands
ok have reread the whole thread and have some ideas:
your currently stuck at the cm7 boot screen ?
have you used the "stock rom version" to wipe data and cache partitions as described here ?
http://forum.xda-developers.com/showthread.php?t=1390773
perhaps it will help to wipe data/cache with twrp ...
Click to expand...
Click to collapse
Just wanted to let you know I updated the OP with a video showing what is happening to my KF.
Haven't tried that particular rom yet, but I have wiped data and cache and attempted to re-install CM7.
great idea with the video !!!
b63 said:
fastboot has nothing to do with adb - calling just the exe does nothing -
you have to issue fastboot commands
ok have reread the whole thread and have some ideas:
your currently stuck at the cm7 boot screen ?
have you used the "stock rom version" to wipe data and cache partitions as described here ?
http://forum.xda-developers.com/showthread.php?t=1390773
perhaps it will help to wipe data/cache with twrp ...
Click to expand...
Click to collapse
OK, so I restored my original rooted kindle rom, but I still can't get into fastboot because of the problem I showed in the video. It is doing exactly the same thing, just instead of the CM7 boot screen, it is the Kindle Fire boot screen.
Is is possible to get into fastboot without the computer? Can anyone think of a reason why I would not be able to mount my device in TWRP?
I just want to understand something about fastboot... can you upload and flash roms with it? Or can you only get TWRP / FFF with it? I ask because I already have them, and I still can't do anything (mount from inside TWRP doesn't work). Thanks!
Sent via my internet connected mobile cellular telephone.
with fastboot you can install the newest fff and if you need twrp
but with the newest fff you can issue ""fastboot oem format"
see here:
http://forum.xda-developers.com/showthread.php?t=1369405
that should solve every issue ...
b63 said:
with fastboot you can install the newest fff and if you need twrp
but with the newest fff you can issue ""fastboot oem format"
see here:
http://forum.xda-developers.com/showthread.php?t=1369405
that should solve every issue ...
Click to expand...
Click to collapse
Cool. I just ordered one of SkOrPn's cables, so once I get it I'll be sure to give an update. Thanks for all the help so far!
The cable isn't need when you have the FFF bootloader, in fact, when your computer does see the device for the short amount of time shown in the video, fastboot is active. It's a feature of FFF. Fastboot is a command line tool like adb but is used for different things. It comes in Android sdk which if you have that, you should update the tools packages in the Android manager and it will update adb and fastboot. It looks like something is not working correctly in twrp and the OS is failing to load. I'm not sure you need to oem format tho.....
At some point you had to have used fastboot to install twrp and/or FFF.... Unless you used adb dd? :what:
Anyway, I can help more but it's late where I am, need to sleep. Was going to write more but... Need sleep lol. I'll post some questions and check back tomorrow.
Have you used adb before? Do you know if platform-tools is in your environment variables PATH? In other words, can you open up cmd and type adb or do you need to "cd" to platform-tools then use adb? If you know where adb is located? If so, is a file called fastboot in there? (Maby called fastboot.exe)
foxdog66 said:
The cable isn't need when you have the FFF bootloader, in fact, when your computer does see the device for the short amount of time shown in the video, fastboot is active. It's a feature of FFF. Fastboot is a command line tool like adb but is used for different things. It comes in Android sdk which if you have that, you should update the tools packages in the Android manager and it will update adb and fastboot. It looks like something is not working correctly in twrp and the OS is failing to load. I'm not sure you need to oem format tho.....
At some point you had to have used fastboot to install twrp and/or FFF.... Unless you used adb dd? :what:
Anyway, I can help more but it's late where I am, need to sleep. Was going to write more but... Need sleep lol. I'll post some questions and check back tomorrow.
Have you used adb before? Do you know if platform-tools is in your environment variables PATH? In other words, can you open up cmd and type adb or do you need to "cd" to platform-tools then use adb? If you know where adb is located? If so, is a file called fastboot in there? (Maby called fastboot.exe)
Click to expand...
Click to collapse
Yep, I've used adb successfully, and it is set up as an environmental variable. I actually installed FFF and TWRP with the KFU. Problem is I think something else is botched; perhaps it is TWRP itself, since I am unable to mount from TWRP. I'll try again when I get home.
Sent via my internet connected mobile cellular telephone.
Hello everyone!
Okay, so I'll try to keep it as short as possible but with the most information I can give ofc.
So here's what I did with my Oneplus 2:
- unlocked bootloader
- flashed custom recovery (twrp)
- flashed superSU.zip
- flashed xposed.zip
- used it for about half a year if not even longer
everything on Lollipop 5.1 stock rom so xposed would work.
Everything was fine but some day when I wanted to enter twrp recovery it didn't work. (I swear, this is the most illogical thing ever but I DID NOT CHANGE A THING!)
I tried to enter recovery via fastboot but that didn't work either.
So I reflashed latest TWRP recovery.img for OP2 via fastboot.
When I pressed power + vol. down to see if it'd work nothing happened.
When I tried to enter recovery when my system was booted via power button->restart->recovery my phone got stuck in a bootloop.
I had to go in fastboot mode to enter "fastboot continue" in order to get my phone booting normal again.
Then, one night when my phone was in my pocket it vibrated and got stuck in the bootloop again, even though it was booted into system and locked last time I used it (minutes before that).
I had no access to a computer at that moment so I had to wait for a few days.
Now when I boot my phone in fastboot mode and try to enter "fastboot continue" on my cmd nothing happens with my phone and cmd says "(command write failed (Unknown error))" even though "fastboot devices" shows that my device is connected properly.
I also tried:
- the FirstAidKit, copied the Win Files in my fastboot directory and started the firstaid.bat but it stops on "fastboot flash boot boot.img" (I waited for like two hours).
- a different USB port (USB 3 and USB 2)
I am kinda depending on my phone so yeah..
If someone knows how to fix this I would be very grateful.
Have a good day/night
SoulSnatcher
Do you have a backup??
If yes, download the latest official OS from Oneplus and the stock recovery. Flash the stock recovery. Try rebooting into stock recovery. If it succeeds, wipe everything and flash OS via adb sideload.
Honestly, I can't guess what went wrong with your device. Maybe it could've been some app which crashed the entire system.
AJay27 said:
Flash the stock recovery.
Click to expand...
Click to collapse
Same problem as with the FirstAidKit:
"fastboot devices" does display the device but "fastboot flash recovery recovery.img" doesn't do anything (I waited for 1h just to make sure).
I'll try this Mega Unbrick Guide for A Hard Bricked OnePlus 2 next, even though I can get into fastboot but since it doesn't do s**t I'll have to give it a try. I mean, what's the worst thing that could happen? That my phone gets bricked?!
Haha.... hmm.
I'll keep the person(s) updated who care to know what's happening.
Cheers
fml
Hey guys,
Yesterday I tried, after a few months of not modding my phone, to update my recovery as i was running a very old version of TWRP. Long story short I did something wrong somewhere and my phone has ended up in a bit of a weird state.
At the moment the OS is BlissRom, however it fails to boot. The loading screen runs very slowly and never actually boots the OS. The current recovery is the stock recovery.
The thing that is giving me an issue is the fact that somehow the bootloader has locked, so I am unable to flash a new OS onto my phone. I'm not able to flash anything onto my phone as it throws an error telling me the phone is locked.
Overall I aren't able to boot into the OS, however I have access to the stock recovery and fastboot. Unfortunately it looks as though the bootloader has locked some how.
Any ideas how I can fix this, or have I completely messed my phone up?
Thanks in advance.
Hi
U said u were running twrp before which means u have unlocked bootloader and flash roms already.
How did u end up with stock recovery?
Also is it phone being detected bycur PC?
Sent from my ONE A2005 using Tapatalk
I believe it was a result of running the QualComm restoration tool. I ran this and it didn't look as though it did anything however after i rebooted into recovery I found it was stock.
I'm not sure if using this tool also re locked the bootloader however as it appears to be locked and I cant flash anything in fastboot mode.
colinbest2 said:
I believe it was a result of running the QualComm restoration tool. I ran this and it didn't look as though it did anything however after i rebooted into recovery I found it was stock.
I'm not sure if using this tool also re locked the bootloader however as it appears to be locked and I cant flash anything in fastboot mode.
Click to expand...
Click to collapse
Did u also tried command fastboot oem unlock
Sent from my ONE A2005 using Tapatalk
Indeed I have, I get an error saying "phone is locked".
I think the resolution will be running the restoration tool fully but i cant seem to get it to do anything. It just sits there with no progress bars appearing.
Have you ever had any experience with this tool?
No I never used recovery tools.
Can u at any point let's say u boot into recovery and connect the device to PC, will it detected the internal storage?
Sent from my ONE A2005 using Tapatalk
Unfortunately not, if I boot the OS it gets stuck at the loading animation, it isn't a bootloop oddly enough.
Booting in recovery the PC doesn't detect the internal storage, however if I choose "Update from USB" I can see that ADB detects my phone in sideload mode.
Much like in fastboot mode I can see my PC detects my phone in fastboot mode.
I do have some OS zips on the internal storage which I have tried flashing in stock recovery, however these always result in "Install failed" errors.
Dude i think you have to use recovery tool now
Here is the link first read carefully https://forums.oneplus.net/threads/...ck-guide-for-a-hard-bricked-oneplus-2.347607/
Thanks for the link buddy.
I've gone through this thread, I think the issue preventing this from working for me is the fact that although I have installed the relevant drivers, when I plug my phone into my PC the drivers assigned to it are "Android Bootloader Interface". When I try to target another driver, using the Update driver functionality it just refuses to change, saying the driver already assigned is the newer one.
Any ideas how I can get around this? I know ideally it should appear as Qualcomm 9008. I've tried all the methods in the "How to Make the device show as Qualcomm 9008" section without any success.
colinbest2 said:
Unfortunately not, if I boot the OS it gets stuck at the loading animation, it isn't a bootloop oddly enough.
Booting in recovery the PC doesn't detect the internal storage, however if I choose "Update from USB" I can see that ADB detects my phone in sideload mode.
Much like in fastboot mode I can see my PC detects my phone in fastboot mode.
I do have some OS zips on the internal storage which I have tried flashing in stock recovery, however these always result in "Install failed" errors.
Click to expand...
Click to collapse
Here's what to do...
U will need to sideload the stock rom which can be downloaded from here: https://s3.amazonaws.com/oxygenos.o...4_OTA_020_all_1608262242_44a55e674a2b4bf6.zip
-Place the zip in ur adb folder and rename it to update.zip.
-Connect the Oneplus2 to the PC with USB cable and open a command prompt or terminal on your PC. To do this open the ADB folder press shift + right click and click on open command here.
-Reboot to recovery and select install from usb.
-Flash the OxygenOS on OnePlus 2 by typing:
adb sideload update.zip
-Now the update will start and this will take some time.
Hope it helped[emoji106]
Sent from my ONE A2005 using Tapatalk
Brandon Indar said:
Here's what to do...
U will need to sideload the stock rom which can be downloaded from here: https://s3.amazonaws.com/oxygenos.o...4_OTA_020_all_1608262242_44a55e674a2b4bf6.zip
-Place the zip in ur adb folder and rename it to update.zip.
-Connect the Oneplus2 to the PC with USB cable and open a command prompt or terminal on your PC. To do this open the ADB folder press shift + right click and click on open command here.
-Reboot to recovery and select install from usb.
-Flash the OxygenOS on OnePlus 2 by typing:
adb sideload update.zip
-Now the update will start and this will take some time.
Hope it helped[emoji106]
Sent from my ONE A2005 using Tapatalk
Click to expand...
Click to collapse
Hey dude, thanks for the help! So I went through these steps and it actually appeared to sideload and update properly.
However now it looks as though my phone is stuck at the one+ logo when I go to boot the OS.
colinbest2 said:
Hey dude, thanks for the help! So I went through these steps and it actually appeared to sideload and update properly.
However now it looks as though my phone is stuck at the one+ logo when I go to boot the OS.
Click to expand...
Click to collapse
Try this one :
https://s3.amazonaws.com/oxygenos.o...4_OTA_019_all_1606041303_bd42fc5cc5cc4ab2.zip
If still stuck on boot logo, boot in fastboot, connect to PC and run command : fastboot erase userdata
If not work try sideload a rom u have with same steps[emoji4]
Sent from my ONE A2005 using Tapatalk
Hi.
Recently I decided to flash lineage os 15.1 on my MiA1
For that I have downgrade to Android nougat.
After downgrading I booted my device.
After setting up device I booted device in fastboot mode to follow further steps like flashing TWRP and all but the problem is my device goes in fastboot mode and it is not identified by abd and after that it is automatically getting restarted and is not holding in fastboot mode.
Please help??
Odd issue. What are you using to flash? If you are using XiaoMiFlash.exe, you'll want to try the (THIS WILL REMOVE ALL YOUR DATA) "clean all" option. Please note that this removes all your data.
I have used MiFlash tool for this and now My device automatically reboot from fastboot mode so I am not able to use adb as well to flash rom or twrp also Now MiFlash tool is not recognising the device.
MrUsamahh said:
I have used MiFlash tool for this and now My device automatically reboot from fastboot mode so I am not able to use adb as well to flash rom or twrp also Now MiFlash tool is not recognising the device.
Click to expand...
Click to collapse
Hmm. What ROM version are you trying to flash on this? If your device isn't recognized by your PC when in fastboot mode, I'm not sure how you'd flash it.
oreo27 said:
Hmm. What ROM version are you trying to flash on this? If your device isn't recognized by your PC when in fastboot mode, I'm not sure how you'd flash it.
Click to expand...
Click to collapse
I flashed Android N Fastboot rom by selecting Clean and lock option.
After that the problem started
MrUsamahh said:
I flashed Android N Fastboot rom by selecting Clean and lock option.
After that the problem started
Click to expand...
Click to collapse
It should boot if you've fully flashed it and cleaned the user data partition. If it still isn't, you'll want to wait for other members with more experience in bricks to chime in.
oreo27 said:
It should boot if you've fully flashed it and cleaned the user data partition. If it still isn't, you'll want to wait for other members with more experience in bricks to chime in.
Click to expand...
Click to collapse
My device is booting up without any problems.
But the problem is bootloader is still unlocked. So i am not able to update via OTA.
And as the device does not holds in fastboot mode so I am not able to do other flash work.
Is there any way I can share a video of my problem with you?
MrUsamahh said:
My device is booting up without any problems.
But the problem is bootloader is still unlocked. So i am not able to update via OTA.
And as the device does not holds in fastboot mode so I am not able to do other flash work.
Is there any way I can share a video of my problem with you?
Click to expand...
Click to collapse
Oh. If it's booting up fine, then you shouldn't be worried too much.
If it keeps restarting in Fastboot mode, it could be a driver issue which is preventing your PC from recognizing your device and vice versa. I'm on Windows 10 which installs drivers automatically so I've never had experience with it.
oreo27 said:
Oh. If it's booting up fine, then you shouldn't be worried too much.
If it keeps restarting in Fastboot mode, it could be a driver issue which is preventing your PC from recognizing your device and vice versa. I'm on Windows 10 which installs drivers automatically so I've never had experience with it.
Click to expand...
Click to collapse
https://photos.app.goo.gl/TyLendNH7XaY74bs1
Please see this video.
If i boot in fastboot mode the device should be in fastboot mode till power button is not pressed for at least 10 seconds.
But in this case it gets switched off.
I have not connected the USB to pc and nothing else.
MrUsamahh said:
https://photos.app.goo.gl/TyLendNH7XaY74bs1
Please see this video.
If i boot in fastboot mode the device should be in fastboot mode till power button is not pressed for at least 10 seconds.
But in this case it gets switched off.
I have not connected the USB to pc and nothing else.
Click to expand...
Click to collapse
I think that's expected behavior? If it doesn't recognize itself being connected to a device, it'll exit fastboot mode.
I think you need to connect it to the USB cable and into your PC for it to not restart/power off.
oreo27 said:
I think that's expected behavior? If it doesn't recognize itself being connected to a device, it'll exit fastboot mode.
I think you need to connect it to the USB cable and into your PC for it to not restart/power off.
Click to expand...
Click to collapse
No when I connect it to pc at that time also same happens.
Previously when booted in fastboot mode it will stay ther by the time juice is out.
MrUsamahh said:
No when I connect it to pc at that time also same happens.
Previously when booted in fastboot mode it will stay ther by the time juice is out.
Click to expand...
Click to collapse
Yup. I just tested it out. It looks like you're right.
oreo27 said:
Yup. I just tested it out. It looks like you're right.
Click to expand...
Click to collapse
So do you know how can I help myself out?
wait.. what exacly did you do when you booted into fastboot? did you type "adb devices" or "fastboot devices"? also, try rebooting into fastboot mode by typing "adb reboot bootloader" in cmd, with your phone plugged into your pc, and with the proper platform-tools installed. it shouldn't really go away from fastboot mode like that.
Mizuru said:
wait.. what exacly did you do when you booted into fastboot? did you type "adb devices" or "fastboot devices"? also, try rebooting into fastboot mode by typing "adb reboot bootloader" in cmd, with your phone plugged into your pc, and with the proper platform-tools installed. it shouldn't really go away from fastboot mode like that.
Click to expand...
Click to collapse
Hy man, I know basic of adb and I use cmd "adb devices"
My device is recognised when it is on.
I can also give various cmd like boot in recovery or fastboot mode or reboot and the device follow the instructions.
Please see the video that I've shared.
Once fastboot mode is on the device is automatically restarted in about 10 to 15 sec and within this time MiFlash tool or adb cmd prompt bot does not recognise my device.
I have tried to flash OTA via adb side load but it is showing error.
Help me with your input!
MrUsamahh said:
Hy man, I know basic of adb and I use cmd "adb devices"
My device is recognised when it is on.
I can also give various cmd like boot in recovery or fastboot mode or reboot and the device follow the instructions.
Please see the video that I've shared.
Once fastboot mode is on the device is automatically restarted in about 10 to 15 sec and within this time MiFlash tool or adb cmd prompt bot does not recognise my device.
I have tried to flash OTA via adb side load but it is showing error.
Help me with your input!
Click to expand...
Click to collapse
Your device doesn't get detected in your CMD prompt when it's in fastboot AND you type "fastboot devices"?
If it doesnt then you might have flashed something incorrectly.
Also, make sure to have your android drivers up to date in your pc. It's very, very likely that you don't have them installed on your PC, or they are outdated. See this: https://developer.android.com/studio/run/oem-usb.html
And this: https://developer.android.com/studio/releases/platform-tools.html
I have faced this issue. Yesterday i dirty flashed a custom rom. but i forgot how to dirty flash. i just simply flashed the rom and restarted the phone. it was mandatory to flash custom recovery and gapps after flashing a rom dirtily or normally. but i didn't. After the reboot completed, i remembered that i didn't flashed the twrp and gapps. So, i go back recovery mod, guessed i could flash twrp now. But i didn't see any custom recovery on my phone. But the phone boots, and i can use the phone. Still, i'm on that phone, while i'm typing this comment. i didn't lost my data cause i flashed dirtily. But the problem is, as i didn't flashed gapps or magisk (for root access), now i can't use google apps like, play store, and more. As i don't have root access on my phone so, i can't run flasify, to flash custom recovery. neither i can run other apps that need root. As i didn't flash custom recovery, now i can't flash gapps, magisk and whatever that needs a custom recovery.
I told some rom porter about the matter. They told me to flash stock rom. So, i was trying to flash stock rom. but flashing stock rom requires a fastboot mode. But my fastboot logo doesn't appear and it's blank. I told this to a rom porter. But he said, He doesn't know about that and he can't help.
I have unlocked my phone, hoping to find a fix to USB external camera not being recognized. As a consequence, I am not able to update my system through OTA. Moreover, I am no longer able to enter fastboot mode. Whatever key combination I tried, my phone will do a normal boot. When I power up or I press volume - I only end up doing a normal boot or powering off. If I press all 3 keys together I get into the e-recovery boot, which fails. I have only been able to boot into TWRP after downloading a system update and choosing to install it. With this procedure, the update will not be installed, but I will boot into TWRP. From here, if I choose recovery, I do boot into fastboot, but my fastboot is not recognized by my computer, as it was before. Running either ADB or Fastboot will not reveal any device connected.
pieemme said:
I have unlocked my phone, hoping to find a fix to USB external camera not being recognized. As a consequence, I am not able to update my system through OTA. Moreover, I am no longer able to enter fastboot mode. Whatever key combination I tried, my phone will do a normal boot. When I power up or I press volume - I only end up doing a normal boot or powering off. If I press all 3 keys together I get into the e-recovery boot, which fails. I have only been able to boot into TWRP after downloading a system update and choosing to install it. With this procedure, the update will not be installed, but I will boot into TWRP. From here, if I choose recovery, I do boot into fastboot, but my fastboot is not recognized by my computer, as it was before. Running either ADB or Fastboot will not reveal any device connected.
Click to expand...
Click to collapse
When you use key combinations, you must shutdown your phone first, not reboot or you can boot into system, make sure that usb debugging is turned on, open adb and type "adb reboot bootloader".
DeathBell said:
When you use key combinations, you must shutdown your phone first, not reboot or you can boot into system, make sure that usb debugging is turned on, open adb and type "adb reboot bootloader".
Click to expand...
Click to collapse
Thanks, I followed your instructions but with no success. As soon as I plug into USB it will power on and go on with a normal system boot, no matter how quick I am in typing the command "adb reboot bootloader", which invariably returns "no devices/emulators found", or whether I press the volume - button or not. This also happens when I am in the charging screen (not sure whether this also equals power off).
pieemme said:
Thanks, I followed your instructions but with no success. As soon as I plug into USB it will power on and go on with a normal system boot, no matter how quick I am in typing the command "adb reboot bootloader", which invariably returns "no devices/emulators found", or whether I press the volume - button or not. This also happens when I am in the charging screen (not sure whether this also equals power off).
Click to expand...
Click to collapse
No, you need to boot to Android to use adb.
Is your device bricked or stuck in a bootloop or something?
DeathBell said:
No, you need to boot to Android to use adb.
Is your device bricked or stuck in a bootloop or something?
Click to expand...
Click to collapse
I wouldn’t call it properly bricked, inasmuch as it is actually doing its job. However, It does some strange things: it gets the OTA updates, but when I click on Download and Install, it restarts in the TWRP menu (which I cannot otherwise access. I have 2 TWRP apps installed, which don’t seem to be of any use: official TWRP App and TWRP Manager). When I am in the TWRP menu, I can choose to restart in the bootloader. However, once there, with the green window telling me that my phone is flashed, the phone is still not detected by ADB or Fastboot commands. I don’t know when the bootloader started to be unaccessible because I left the tinkering a couple of months ago, when I realized that nobody so far has had any success in getting a P10 Lite to work with a USB Endoscope.
pieemme said:
I wouldn’t call it properly bricked, inasmuch as it is actually doing its job. However, It does some strange things: it gets the OTA updates, but when I click on Download and Install, it restarts in the TWRP menu (which I cannot otherwise access. I have 2 TWRP apps installed, which don’t seem to be of any use: official TWRP App and TWRP Manager). When I am in the TWRP menu, I can choose to restart in the bootloader. However, once there, with the green window telling me that my phone is flashed, the phone is still not detected by ADB or Fastboot commands. I don’t know when the bootloader started to be unaccessible because I left the tinkering a couple of months ago, when I realized that nobody so far has had any success in getting a P10 Lite to work with a USB Endoscope.
Click to expand...
Click to collapse
Thats normal behaviour, when you have a custom recovery installed and do anything in the stock recovery then it boots you into the custom recovery, it should also boot to TWRP when you do factory reset in the stock recovery. And when your phone isn't detected by fastboot then its probably a adb and fastboot installation issue on your PC, type "fastboot devices" to see if it detects your device. And what do you even want to do in fastboot?
Also are you in Nougat or Oreo?
DeathBell said:
Thats normal behaviour, when you have a custom recovery installed and do anything in the stock recovery then it boots you into the custom recovery, it should also boot to TWRP when you do factory reset in the stock recovery. And when your phone isn't detected by fastboot then its probably a adb and fastboot installation issue on your PC, type "fastboot devices" to see if it detects your device. And what do you even want to do in fastboot?
Also are you in Nougat or Oreo?
Click to expand...
Click to collapse
I am not too sure to have any working recovery at all, right now. If I press all 3 buttons, I get into the Huawei recovery mode, which fails. I am on EMUI 5.1.1 (Nougat) and would like to install a stock recovery to Oreo. If I am able to get to a working bootloader mode, I would like to install this file which seems to be a stock recovery with Oreo (WARSAW L21C432B182_EU_SERVICE_ANDROIDHOST.RU.RAR). Otherwise, I will buy a MicroSD card reader and try copying this installation to the card, which, according to this video (https://www.youtube.com/watch?v=0vDgDXePAR4&feature=youtu.be) should be the last resort, if everything else fails. I would be perfectly happy to return to a working and updated standard EMUI. I'm told that if I installed the OTA version this would not be working correctly on my my phone. According to an app called Rootchecker, my phone is not properly rooted either, but there are a lot of crappy apps out there, so I don't know what to believe.
BTW: I don't believe there is any problem with my adb fastboot installation (on MacOS). It was working earlier on. When I type "fastboot devices", it returns: "waiting for any device"
pieemme said:
I am not too sure to have any working recovery at all, right now. If I press all 3 buttons, I get into the Huawei recovery mode, which fails. I am on EMUI 5.1.1 (Nougat) and would like to install a stock recovery to Oreo. If I am able to get to a working bootloader mode, I would like to install this file which seems to be a stock recovery with Oreo (WARSAW L21C432B182_EU_SERVICE_ANDROIDHOST.RU.RAR). Otherwise, I will buy a MicroSD card reader and try copying this installation to the card, which, according to this video (https://www.youtube.com/watch?v=0vDgDXePAR4&feature=youtu.be) should be the last resort, if everything else fails. I would be perfectly happy to return to a working and updated standard EMUI. I'm told that if I installed the OTA version this would not be working correctly on my my phone. According to an app called Rootchecker, my phone is not properly rooted either, but there are a lot of crappy apps out there, so I don't know what to believe.
BTW: I don't believe there is any problem with my adb fastboot installation (on MacOS). It was working earlier on. When I type "fastboot devices", it returns: "waiting for any device"
Click to expand...
Click to collapse
I still can't uderstand you. Can you boot into Android or not? And Does TWRP work? When you device is softbricked, what did you do to brick it?
At one point you say that you can access fastboot by choosing reboot to bootloader in TWRP and then you say that you have no working recovery at all.
Anyway I can't help you with the fastboot thing then and that file isn't Oreo it's an old version of Nougat, B360 and up is Oreo and also B321 witch is Oreo Beta. You can only flash image files in fastboot anyway as that file needs to be unpacked and put on the dload folder on your sd card.
When you want to get to Oreo you can either use service roms from this thread https://forum.xda-developers.com/p10-lite/development/service-rom-b362-c432-upgrade-o-o-n-o-t3813946, you need to copy the two zip files into the dload folder in your SD card. You can also use HWOTA but that wouldn't work since fastboot isn't working for whatever reason. Or when your custom recovery is working you can use HuRUpdater. But you need to be on the newest version of Nougat B210 or B209 to update as otherwise you may brick your phone.