Database Users

Problems booting into recovery

Okay, to start with, I've read the other threads about this. I understand the process that *should* work:
1. Power off.
2. Then, press and hold both all Volume Down + Power buttons at the same time until the LG Logo is being displayed on your LG V20.
3. Now, release the keys and press the above combination again however, this time you should wait until recovery mode menu is displayed.
...and I've tried the version where you keep holding the Volume Down button the entire time.
So, yes, I've reached the white screen where it asks you if you want to do a factory reset. I've hit "Yes" to both questions. The problem is that it really does a factory reset then.
---
After unlocking the bootloader, I installed TWRP via fastboot:
adb reboot bootloader
fastboot flash recovery twrp.img
fastboot reboot
...everything went fine.
But I can't get into recovery. And since I'm waiting to have TWRP working so that I can flash root, I can't boot into recovery via an app.
What did I do wrong?
EDIT:
Okay, it looks like TWRP isn't working properly. I tried "adb reboot recovery" and that got me to a dead Android icon and a "No command" message. I have no idea why TWRP isn't working.

Haphim said:
Okay, to start with, I've read the other threads about this. I understand the process that *should* work:
1. Power off.
2. Then, press and hold both all Volume Down + Power buttons at the same time until the LG Logo is being displayed on your LG V20.
3. Now, release the keys and press the above combination again however, this time you should wait until recovery mode menu is displayed.
...and I've tried the version where you keep holding the Volume Down button the entire time.
So, yes, I've reached the white screen where it asks you if you want to do a factory reset. I've hit "Yes" to both questions. The problem is that it really does a factory reset then.
---
After unlocking the bootloader, I installed TWRP via fastboot:
adb reboot bootloader
fastboot flash recovery twrp.img
fastboot reboot
...everything went fine.
But I can't get into recovery. And since I'm waiting to have TWRP working so that I can flash root, I can't boot into recovery via an app.
What did I do wrong?
EDIT:
Okay, it looks like TWRP isn't working properly. I tried "adb reboot recovery" and that got me to a dead Android icon and a "No command" message. I have no idea why TWRP isn't working.
Click to expand...
Click to collapse
to confirm, have you verified you are using the correct TWRP version for your V20?
in this step "fastboot flash recovery twrp.img" is your twrp image that you saved, named twrp.img? If its not, that command won't work correctly.
usually after I flash recovery, when still in the recovery menu, i choose reboot recovery just to make sure it did stick. If it reboots back to itself, then try rebooting the device, and again confirm with manually entering recovery. Maybe overkill but it works for me LOL.
Good luck!

I am in need of big help! I made a critical error after days of trying to navigate the minefields of rooting my device. I have a LG V20 h910 and it is no one-click wonder root. It made me work for it and I finally got it. I loaded LineageOS 14.1 and all was good until the USB OTG cable from my PS4 controller did not register anymore. Damn, that was a let down, and probably led to my careless move of needing to downgrade my TWRP, saw the version I needed, forgot these are device specific, and now I'm stuck in a hard place.
Perhaps the fix is easy, but I have not found the answer after many, many searches...
I had TWRP 3.2.1-2 and needed to downgrade to 3.2.1-0 to try SuperRom (hoping it would have OTG ability). I hastily grabbed the first TWRP 3.2.1-0, threw it on the SD card, wiped everything except internal storage, and flashed the img, and did a reboot. Road block went up.
I tried getting back into recovery, did the PWR and DOWN pressing combo and got the Factory Reset screen, but after clicking "Yes" to both, instead of getting the TWRP screen, I got this error screen (attached).
I tried another idea - hooked it up USB to my PC and tried accessing it via adb/fastboot. I tried multiple drivers for my device, but no adb and no fastboot devices were ever found. The only thing that almost worked was booting phone into FASTBOOT mode by holding DOWN btn and plugging in a USB cable attached to PC. Once in FASTBOOT mode, My PC at least saw the ID for fastboot device. I tried to flash TWRP via fastboot, and it looked like it would happen, but in the end there was no phone screen response to my attempt, and the cmd window on my PC would get stuck and just hang.
Can someone please advise me on how I can fix this problem?

*SOLVED* Embarrassed to ask for help - but please help!

Hi guys,
Unable to boot after c*cking up a manual upgrade from B10 to B11 on my A2017G and would love your input. I feel like if I can just install TWRP again it should be an easy fix. Here's some specifics:
1. my phone is unlocked, rooted and running stock firmware.
2. I was trying to install stock recovery to install the B11 update. I did so but also tried to install another zip (B10 bootloader?) which I seem to have flashed wrong. Now just get the screen as shown on attachment and cannot boot.
3. Stock recovery seems to have been flashed and I can boot to this. From here I can boot to bootloader but can't seem to do anything from there.
4. I try update via ADB with the sideload command, but get the message "E:footer is wrong. E: Signature verification failed. Installation aborted".
5. I try to Update from SD as have the firmware zip file and TWRP on the root of my external SD card, but get the message "Couldn't Mound /sdcard, aborted."
6. The only time my phone shows as a connected device in ADB is when I try to sideload files. No other ADB code seems to work, only get the message "error: closed" on the terminal.
Assuming I've got all the firmware files (and full backups on my external SD) I feel like if I can just install TWRP again it should be an easy fix. So, any ideas on how I install TWRP given situation above?
Best,
Neil

nstirton said:
Hi guys,
Unable to boot after c*cking up a manual upgrade from B10 to B11 on my A2017G and would love your input. I feel like if I can just install TWRP again it should be an easy fix. Here's some specifics:
1. my phone is unlocked, rooted and running stock firmware.
2. I was trying to install stock recovery to install the B11 update. I did so but also tried to install another zip (B10 bootloader?) which I seem to have flashed wrong. Now just get the screen as shown on attachment and cannot boot.
3. Stock recovery seems to have been flashed and I can boot to this. From here I can boot to bootloader but can't seem to do anything from there.
4. I try update via ADB with the sideload command, but get the message "E:footer is wrong. E: Signature verification failed. Installation aborted".
5. I try to Update from SD as have the firmware zip file and TWRP on the root of my external SD card, but get the message "Couldn't Mound /sdcard, aborted."
6. The only time my phone shows as a connected device in ADB is when I try to sideload files. No other ADB code seems to work, only get the message "error: closed" on the terminal.
Assuming I've got all the firmware files (and full backups on my external SD) I feel like if I can just install TWRP again it should be an easy fix. So, any ideas on how I install TWRP given situation above?
Best,
Neil
Click to expand...
Click to collapse
Are you able to boot into EDL mode by typing ADB reboot edl ?
If so you can flash desired recovery with axon7tool

marcus.linkenbach said:
Are you able to boot into EDL mode by typing ADB reboot edl ?
If so you can flash desired recovery with axon7tool
Click to expand...
Click to collapse
Hi, thanks for your reply. Unfortunately not, just get the message "error: closed" in the terminal. Is there a button combination I could press in order to get into EDL?

nstirton said:
Hi, thanks for your reply. Unfortunately not, just get the message "error: closed" in the terminal. Is there a button combination I could press in order to get into EDL?
Click to expand...
Click to collapse
Try vol+ + vol- + power

it seems that the only time my device will show as connected in ADB is when I navigate through Recovery and select the "Apply Update from ADB" option. But even then, whilst it shows as connected, it only seems to allow the "sideload" command. Please see screenshot of Terminal. So at no other time will it show as a connected device.
Similarly, to have it show up in Device Manager, it'll only show when I switch the phone off, hold down Vol+ & Vol- and attached the power cable.

You are still on MM. So you are able to boot into bootloader.
adb reboot bootloader
fastboot devices
Now it should show your device as fastboot
If so you can now flash recovery with “fastboot flash recovery recovery.img“

marcus.linkenbach said:
You are still on MM. So you are able to boot into bootloader.
adb reboot bootloader
fastboot devices
Now it should show your device as fastboot
If so you can now flash recovery with “fastboot flash recovery recovery.img“
Click to expand...
Click to collapse
Thanks for your reply. Unfortunately as mentioned the only time my device shows as connected in Terminal is when I select "Update via ADB" whilst in recovery. Otherwise the device never shows as connected in adb.
So unfortunately fastboot doesn't seem to be an option for me.
Perhaps my drivers are out of whack but assuming what I've done to my phone hasn't changed that, it must be something PC - side.

nstirton said:
Thanks for your reply. Unfortunately as mentioned the only time my device shows as connected in Terminal is when I select "Update via ADB" whilst in recovery. Otherwise the device never shows as connected in adb.
So unfortunately fastboot doesn't seem to be an option for me.
Perhaps my drivers are out of whack but assuming what I've done to my phone hasn't changed that, it must be something PC - side.
Click to expand...
Click to collapse
But what if it shows your device as sideload? Can't you there reboot into fastboot?

No, it doesn't accept the command. Only one accepts is sideload. You can see from my screenshot a few posts back that the device is connected but shows different to how it normally would.

Breakthrough!
I seemed to follow the steps I've tried 100 times today and I now have TWRP installed again!
Thanks again to those who helped

Help please can't see my phone in adb

I've had my Essential two weeks i was on 8.1 beta.Today i unlocked the boot loader.Then installed twrp while in twrp i side loaded magisk.I went back to fastboot then hit start .The phone just went into a bootloop.I Was able to go back to twrp 2 times but now i can't get back to any type of recovery.I Can get back to fastboot mode ishow all the info and secure boot says yes and device state unlocked.My pc see essential phone fastboot in the device manager but i can't get adb to see it .Can anyone help me ?

forgot something
looks like i skipped this part . Once you're in TWRP, install the stock boot image and then the Magisk/SuperSU zip.Is there anything i can do?

videodave1 said:
I've had my Essential two weeks i was on 8.1 beta.Today i unlocked the boot loader.Then installed twrp while in twrp i side loaded magisk.I went back to fastboot then hit start .The phone just went into a bootloop.I Was able to go back to twrp 2 times but now i can't get back to any type of recovery.I Can get back to fastboot mode ishow all the info and secure boot says yes and device state unlocked.My pc see essential phone fastboot in the device manager but i can't get adb to see it .Can anyone help me ?
Click to expand...
Click to collapse
adb only works while phone is booted into system so nothing wrong there. If you're in the bootloader menu where you see that the status of your device is unlocked then you're already in fastboot mode. Just flash twrp again and the sideload stock 8.1 beta boot image (you can probably find it on xda), sideload magisk too. Go into install and press flash image file and find the stock boot image and then go into install again and change to flash .zip and flash magisk. After that, reboot into system.

WOW thank you so much'
Arju said:
adb only works while phone is booted into system so nothing wrong there. If you're in the bootloader menu where you see that the status of your device is unlocked then you're already in fastboot mode. Just flash twrp again and the sideload stock 8.1 beta boot image (you can probably find it on xda), sideload magisk too. Go into install and press flash image file and find the stock boot image and then go into install again and change to flash .zip and flash magisk. After that, reboot into system.
Click to expand...
Click to collapse
I was able to flash twrp i'll try the rest when i get home from work

sideloading stock img
videodave1 said:
I was able to flash twrp i'll try the rest when i get home from work
Click to expand...
Click to collapse
Do i need it to be zipped I've tried it as image that i downloaded from xda and I've tried a zip i got from Essential neither are working?

zip file
videodave1 said:
Do i need it to be zipped I've tried it as image that i downloaded from xda and I've tried a zip i got from Essential neither are working?
Click to expand...
Click to collapse
When i try i get invalid file format. This is using a zip i got from Essential.

Stuck twrp says no os installed . But i did learn how to push files.

just trying to get back to stock now 

videodave1 said:
just trying to get back to stock now 
Click to expand...
Click to collapse
https://forum.xda-developers.com/essential-phone/development/stock-7-1-1-nmj20d-t3701681

thanks been there tried the Oreo beta that is what i was on when i started and tried the 1st build before the betas i get an error on both i'll try to download them on another pc my phone does show up when i type fastboot devices now just need an os now .

Okay got back to 8.1 bootloader still unlocked twrp not install and i don't have root.I may just wait until P comes out.I'll try and learn more about adb. Thanks for your help Arju.

thanks everyone.

videodave1 said:
Okay got back to 8.1 bootloader still unlocked twrp not install and i don't have root.I may just wait until P comes out.I'll try and learn more about adb. Thanks for your help Arju.
Click to expand...
Click to collapse
No problem. Thank you very much for the donation, that was really kind of you. Hey I'm sure you'll get the hang of it before android P drops. you did figure out what went wrong all by yourself so get a hold of the right boot.img and the rest is exactly as how you did it in the first place but flash the boot.img before magisk. Let me know if you want to give it a dive again.

I'm on 8.1 boot loader unlocked and ready to try to root again .Thanks for the help

This is the closest thread i could find to what is happening to my PH-1.
Like videodave1 I 'was' running the latest stock 8.1 and have my bootloader unlocked. In trying to root the phone I did this:
flash boot flash boot twrp.img
adb shell twrp sideload
adb sideload magisk.zip
All installations went well, but when trying to reboot from twrp it forced me to install the app. After that the phone went into boot loop.
* Note how I didn't sideloaded the Oreo 8.1 image before magisk.
By pressing all 3 buttons I can get the phone to reboot and releasing the volume up I can get to Fastboot. Just volume down and power doesn't work.
The problem now is that adb and fastboot no longer recognise the phone. adb devices just gives an empty list and fastboot only shows < waiting for device >
Trying to go into Recovery mode doesn't work either. Power off doesn't work and Restart bootloader, well, restarts the bootloader.
It might be relevant to mention that I'm running adb and fastboot from Terminal in a Mac and that this is my very first and frustrated attempt to root any phone.
For reference this is what the FastBoot Mode brings:
PRODUCT_NAME - Mata
VARIANT - OPENUS
BOOTLOADER VERSION - mata-aad8ac4
BASEBAND VERSION - 2.0.C4-M1.3.1
SECURE BOOT - yes
DEVICE STATE - unlocked
I might have to just resign myself to the ordinary land of unlocked full stock phones
Thanks very much

avocom said:
This is the closest thread i could find to what is happening to my PH-1.
Like videodave1 I 'was' running the latest stock 8.1 and have my bootloader unlocked. In trying to root the phone I did this:
flash boot flash boot twrp.img
adb shell twrp sideload
adb sideload magisk.zip
All installations went well, but when trying to reboot from twrp it forced me to install the app. After that the phone went into boot loop.
* Note how I didn't sideloaded the Oreo 8.1 image before magisk.
By pressing all 3 buttons I can get the phone to reboot and releasing the volume up I can get to Fastboot. Just volume down and power doesn't work.
The problem now is that adb and fastboot no longer recognise the phone. adb devices just gives an empty list and fastboot only shows < waiting for device >
Trying to go into Recovery mode doesn't work either. Power off doesn't work and Restart bootloader, well, restarts the bootloader.
It might be relevant to mention that I'm running adb and fastboot from Terminal in a Mac and that this is my very first and frustrated attempt to root any phone.
For reference this is what the FastBoot Mode brings:
PRODUCT_NAME - Mata
VARIANT - OPENUS
BOOTLOADER VERSION - mata-aad8ac4
BASEBAND VERSION - 2.0.C4-M1.3.1
SECURE BOOT - yes
DEVICE STATE - unlocked
I might have to just resign myself to the ordinary land of unlocked full stock phones
Thanks very much
Click to expand...
Click to collapse
Even though your phone does not show up its there wipe everything.Fallow what Arju said in his post.I got back to stock then took the 8.1 update i'm not rooted but my bootloader is still unlocked.Oh make sure you unlock critical

videodave1 said:
Fallow what Arju said in his post.
Click to expand...
Click to collapse
Thanks for coming back to me. I really appreciate it.
Arju said:
Just flash twrp again and the sideload stock 8.1 beta boot image (you can probably find it on xda), sideload magisk too.
Click to expand...
Click to collapse
I might be missing something hopefully obvious here. How can I flash twrp again if I my computer can't see the phone. With the USB phone plugged in and in the FastBoot screen I enter into Terminal:
fastboot flash boot twrp.img
and I get:
< waiting for any device >
How do I flash it from the FastBoot screen? BTW, going to Recovery mode just hangs at the Essential logo.
Thanks

avocom said:
Thanks for coming back to me. I really appreciate it.
I might be missing something hopefully obvious here. How can I flash twrp again if I my computer can't see the phone. With the USB phone plugged in and in the FastBoot screen I enter into Terminal:
fastboot flash boot twrp.img
and I get:
< waiting for any device >
How do I flash it from the FastBoot screen? BTW, going to Recovery mode just hangs at the Essential logo.
Thanks
Click to expand...
Click to collapse
are you able to get to the bootloader menu? where it says start on the top.

Arju said:
are you able to get to the bootloader menu? where it says start on the top.
Click to expand...
Click to collapse
Thanks Arju. If you are referring to the FastBoot menu where you can use the up and down volume keys to select Start, Restart Bootloader, Recovery mode and Power off Yes, but not much else unfortunately.
If I select Recovery mode I don't go to the screen with the blue buttons from twrp.
Thanks

avocom said:
Thanks Arju. If you are referring to the FastBoot menu where you can use the up and down volume keys to select Start, Restart Bootloader, Recovery mode and Power off Yes, but not much else unfortunately.
If I select Recovery mode I don't go to the screen with the blue buttons from twrp.
Thanks
Click to expand...
Click to collapse
What you need to understand is that twrp will not stick after you flash it. This device does not have a recovery partition and that's why you replace the boot partition with twrp and while you're in twrp you need to flash the boot.img back and whatever mods on top of that such as kernel etc.. If you flash a rom then it will replace the twrp with the boot.img found in the rom zip.
So now we need the computer to recognize you device. Could you unplug the cable and change the usb port on you computer. connect your phone while you're in the bootloader menu where it says start on the top.
The use use fastboot command: fastboot devices
See if the computer recognizes you device.

Help with loss of root/twrp

I need help! Here’s the story. Sorry for the lengthy post. TL;DR at the bottom..
- Was on B32, unlocked BL, TWRP installed, rooted with SuperSU
- Updated to B35, but lost TWRP and root (I don’t know how, but I assume I must have wiped the wrong things? - system? - I’m clearly a novice)
- Now I’m on B35 with an unlocked BL, but despite days of searching and researching, I can’t for the life of me figure out how to get TWRP reinstalled. I want to have TWRP before trying Magisk (have never used Magisk before, but would like to try it this time instead of SuperSU)
- From my Mac, using terminal, adb recognizes my devices.
- “adb reboot boot loader” gets me to a list of options “power off, restart, recovery, fastboot, back to previous page”. Choosing fastboot simply restarts the phone. What should “fastboot mode” look like?
- I tried flashing TWRP via adb while on this page and terminal stopped at “waiting for any device” and did nothing
My conclusion is that I need to downgrade to whatever latest version allows fastboot commands to work properly? Is this B15? If so, is the only available B15 zip the one that is on the ZTE website? Do I just wipe data/dalvick/cache and flash this zip?
Do I not need a Bootstock and Systemstock like @DrakenFX usually posts? That’s how I’m used to doing any updates.
Thank you all for your help, both past and present!
TL;DR: Would like to downgrade from B35 to B15 so that I can install twrp and root again. What’s the best way to do this and where can I find the appropriate files?

alajoy said:
I need help! Here’s the story. Sorry for the lengthy post. TL;DR at the bottom..
- Was on B32, unlocked BL, TWRP installed, rooted with SuperSU
- Updated to B35, but lost TWRP and root (I don’t know how, but I assume I must have wiped the wrong things? - system? - I’m clearly a novice)
- Now I’m on B35 with an unlocked BL, but despite days of searching and researching, I can’t for the life of me figure out how to get TWRP reinstalled. I want to have TWRP before trying Magisk (have never used Magisk before, but would like to try it this time instead of SuperSU)
- From my Mac, using terminal, adb recognizes my devices.
- “adb reboot boot loader” gets me to a list of options “power off, restart, recovery, fastboot, back to previous page”. Choosing fastboot simply restarts the phone. What should “fastboot mode” look like?
- I tried flashing TWRP via adb while on this page and terminal stopped at “waiting for any device” and did nothing
My conclusion is that I need to downgrade to whatever latest version allows fastboot commands to work properly? Is this B15? If so, is the only available B15 zip the one that is on the ZTE website? Do I just wipe data/dalvick/cache and flash this zip?
Do I not need a Bootstock and Systemstock like @DrakenFX usually posts? That’s how I’m used to doing any updates.
Thank you all for your help, both past and present!
TL;DR: Would like to downgrade from B35 to B15 so that I can install twrp and root again. What’s the best way to do this and where can I find the appropriate files?
Click to expand...
Click to collapse
I'm not sure where you read all that BS, but if your bootloader is unlocked then you can install TWRP via EDL (Or fastboot if you have it). No need to downgrade for anything :laugh: in the past you would have needed to downgrade in order to unlock the bootloader, now it's not even needed
Download EDL Tool by djkuz and install TWRP with that one. Or you can use axon7tool by tennear, but it's much more finicky and ran entirely by commands (no UI).
And just to avoid more trouble, DO NOT LOCK THE BOOTLOADER! You do that with the system even barely modified and you brick the phone. A bunch of people tried to do something, got scared because they made a simple correctable mistake and just locked the bootloader thinking everything would get restored to stock - doesn't work that way.
Not saying you will do this, but I've seen about 4 or 5 people that started just like you and ended up doing that

Choose an username... said:
I'm not sure where you read all that BS, but if your bootloader is unlocked then you can install TWRP via EDL (Or fastboot if you have it). No need to downgrade for anything :laugh: in the past you would have needed to downgrade in order to unlock the bootloader, now it's not even needed
Download EDL Tool by djkuz and install TWRP with that one. Or you can use axon7tool by tennear, but it's much more finicky and ran entirely by commands (no UI).
And just to avoid more trouble, DO NOT LOCK THE BOOTLOADER! You do that with the system even barely modified and you brick the phone. A bunch of people tried to do something, got scared because they made a simple correctable mistake and just locked the bootloader thinking everything would get restored to stock - doesn't work that way.
Not saying you will do this, but I've seen about 4 or 5 people that started just like you and ended up doing that
Click to expand...
Click to collapse
Wow, thanks so much for responding to this. Sounds like this should be easy! A couple of questions before I go about following your advice:
1). Do I download EDL Tool to my computer or phone??
2). If I'm downloading it to my computer, does it matter that I'm using a mac?
Thanks again for your help!

alajoy said:
Wow, thanks so much for responding to this. Sounds like this should be easy! A couple of questions before I go about following your advice:
1). Do I download EDL Tool to my computer or phone??
2). If I'm downloading it to my computer, does it matter that I'm using a mac?
Thanks again for your help!
Click to expand...
Click to collapse
Oh, skipped that part. EDL Tool is a .bat. I'm pretty sure you won't be able to run it on a Mac. If you can find a Windows PC somewhere to do this, it'd be much better...
But there's another way.
Issuing "adb reboot bootloader" effectively sends you into fastboot. That list you mentioned is fastboot (if it says "Start" in green, and you can scroll that, it is fastboot). Just use fastboot from the pc: Put TWRP on the fastboot folder on the PC, then issue "fastboot flash recovery twrp.img" with "twrp.img" being whatever the twrp file name is. After that issue "fastboot reboot recovery". And as soon as you are on TWRP, DON'T GET OUT OF IT. Just wipe data, system, caches; then flash a system (e.g. b10 bootstack and stocksystem), then also flash Magisk, and THEN boot to system

Choose an username... said:
Oh, skipped that part. EDL Tool is a .bat. I'm pretty sure you won't be able to run it on a Mac. If you can find a Windows PC somewhere to do this, it'd be much better...
But there's another way.
Issuing "adb reboot bootloader" effectively sends you into fastboot. That list you mentioned is fastboot (if it says "Start" in green, and you can scroll that, it is fastboot). Just use fastboot from the pc: Put TWRP on the fastboot folder on the PC, then issue "fastboot flash recovery twrp.img" with "twrp.img" being whatever the twrp file name is. After that issue "fastboot reboot recovery". And as soon as you are on TWRP, DON'T GET OUT OF IT. Just wipe data, system, caches; then flash a system (e.g. b10 bootstack and stocksystem), then also flash Magisk, and THEN boot to system
Click to expand...
Click to collapse
"adb reboot bootloader" takes me to the start up screen that says "your device software cannot be checked for corruption..." etc. and gives you 5 sec to either press up or down on volume keys to get to list: “power off, restart, recovery, fastboot, back to previous page”, but the list is all white. If I select "fastboot" it reboots the phone and starts that cycle over again at the "your device software cannot be checked for corruption..." etc page.
Nowhere am I given a chance to use fastboot commands. I'm never on the page with the green "Start".
..This all seemed a lot simpler on my Nexus 5..
Thanks for your help/patience.

alajoy said:
"adb reboot bootloader" takes me to the start up screen that says "your device software cannot be checked for corruption..." etc. and gives you 5 sec to either press up or down on volume keys to get to list: “power off, restart, recovery, fastboot, back to previous page”, but the list is all white. If I select "fastboot" it reboots the phone and starts that cycle over again at the "your device software cannot be checked for corruption..." etc page.
Nowhere am I given a chance to use fastboot commands. I'm never on the page with the green "Start".
..This all seemed a lot simpler on my Nexus 5..
Thanks for your help/patience.
Click to expand...
Click to collapse
I thought you had fastboot since you described the 5 seconds screen and both are very similar. It's normal not to have it though.
I think there's some version of axon7tool for Linux but I'm not sure at all. The best way would be to find a Windows computer.
I wonder how you actually installed TWRP the first time? Via fastboot?
As soon as you get TWRP you should be able to run a few commands to get fastboot back just to have it around.

Choose an username... said:
I thought you had fastboot since you described the 5 seconds screen and both are very similar. It's normal not to have it though.
I think there's some version of axon7tool for Linux but I'm not sure at all. The best way would be to find a Windows computer.
I wonder how you actually installed TWRP the first time? Via fastboot?
As soon as you get TWRP you should be able to run a few commands to get fastboot back just to have it around.
Click to expand...
Click to collapse
I have adb and fastboot installed on my Mac and I can't remember how I got it working on my phone in the first place, but I've only ever used a Mac for all this. Terminal recognizes my device and responds to commands until I try "fastboot flash recovery twrp.img" then it says "<waiting for any device>" and does nothing.
Thanks again for the help. I'll keep hunting though. I don't have access to any Windows computer.
Cheers

phone bricked? help!

I decided to update my old oneplus 2 to lineageos 15.1 with, but when I tried to flash the file with TWRP, it shows an error. Since the TWRP version I was using was old, I decided to update it first. Keep in mind at this point i had completely wiped my device. So, I downloaded the "twrp-3.2.1-0-kenzo.img" file, as per a youtube video where the dude managed to flash the update successfully, and gave it a go. It showed up as successful. Then i shut the whole device off, and tried to boot back in to recovery to flash the ROM again, but the thing won't boot. It's stuck on this boot screen (with the oneplus logo and 'powered by android' at the bottom), and refuses to go further. I'm stuck in a situation with the phone having no OS, no recovery and the thing won't show up when I connect it to the pc either. Well, the pc makes the 'device connected' notification sound when I plug it in, but nothing shows up on the file explorer or the device manager.
That's my dilemma, please i need help!
Thanks in advance.

inwarse said:
I decided to update my old oneplus 2 to lineageos 15.1 with, but when I tried to flash the file with TWRP, it shows an error. Since the TWRP version I was using was old, I decided to update it first. Keep in mind at this point i had completely wiped my device. So, I downloaded the "twrp-3.2.1-0-kenzo.img" file, as per a youtube video where the dude managed to flash the update successfully, and gave it a go. It showed up as successful. Then i shut the whole device off, and tried to boot back in to recovery to flash the ROM again, but the thing won't boot. It's stuck on this boot screen (with the oneplus logo and 'powered by android' at the bottom), and refuses to go further. I'm stuck in a situation with the phone having no OS, no recovery and the thing won't show up when I connect it to the pc either. Well, the pc makes the 'device connected' notification sound when I plug it in, but nothing shows up on the file explorer or the device manager.
That's my dilemma, please i need help!
Thanks in advance.
Click to expand...
Click to collapse
You downloaded the KENZO (this is not oneplus2! ) TWRP and flashed it on another phone (oneplus2), just normal that it doesn't work and your phone is messed up.
If you can enter fastboot (vol up and power button to boot) you can rescue your phone:
-enter fastboot (vol up + power, while phone is completely off, u can also hold it until you can see "fastboot" written on the screen)
-connect device to a computer with fastboot installed
-type "fastboot oem unlock" into a terminal/cmd window if there is no error, you are good to go, otherwise your bootloader relocked, use this thread to recover
-if your bootloader is still unlocked, download the ONEPLUS2 TWRP IMG, ALWAYS make sure to only flash the roms, kernels, recoveries or zips for YOUR phone otherwise you can really DESTROY your phone!
-now type into terminal/cmd: "fastboot flash recovery *drag the oneplus2 twrp image into terminal/cmd window* and hit enter
-use vol down + power to reboot phone into recovery and wipe all partitions
-Install a ONEPLUS2 ROM of your choice
If something is not clear, use google, because this is most likely basic stuff you have to know when flashing your phone

I can in fact go to fastboot mode by holding the power+volume up keys. When I the phone to my pc it does show a fastboot device (9597b869 fastboot). What do i do from here?

inwarse said:
I can in fact go to fastboot mode by holding the power+volume up keys. When I the phone to my pc it does show a fastboot device (9597b869 fastboot). What do i do from here?
Click to expand...
Click to collapse
As I wrote above (it's a step-by-step guide, u only have to READ )
-connect device to a computer with fastboot installed
-type "fastboot oem unlock" into a terminal/cmd window if there is no error, you are good to go, otherwise your bootloader relocked, use this thread to recover
-if your bootloader is still unlocked, download the ONEPLUS2 TWRP IMG, ALWAYS make sure to only flash the roms, kernels, recoveries or zips for YOUR phone otherwise you can really DESTROY your phone!
-now type into terminal/cmd: "fastboot flash recovery *drag the oneplus2 twrp image into terminal/cmd window* and hit enter
-use vol down + power to reboot phone into recovery and wipe all partitions
-Install a ONEPLUS2 ROM of your choice

wertus33333 said:
As I wrote above (it's a step-by-step guide, u only have to READ )
-connect device to a computer with fastboot installed
-type "fastboot oem unlock" into a terminal/cmd window if there is no error, you are good to go, otherwise your bootloader relocked, use this thread to recover
-if your bootloader is still unlocked, download the ONEPLUS2 TWRP IMG, ALWAYS make sure to only flash the roms, kernels, recoveries or zips for YOUR phone otherwise you can really DESTROY your phone!
-now type into terminal/cmd: "fastboot flash recovery *drag the oneplus2 twrp image into terminal/cmd window* and hit enter
-use vol down + power to reboot phone into recovery and wipe all partitions
-Install a ONEPLUS2 ROM of your choice
Click to expand...
Click to collapse
i tried to follow the guide. but the bootloader, as per you description is relocked. the download link for the driver you provided shows up as empty/no longer available. that's where i'm getting stuck.
P.S, i can enter fastboot mode on the phone via power+volume up.
thanks for the help so far, i can't seem to find much help other than from you so far

Oh, the link is dead, sry for that. try this one (GDrive links are up and working).

inwarse said:
i tried to follow the guide. but the bootloader, as per you description is relocked. the download link for the driver you provided shows up as empty/no longer available. that's where i'm getting stuck.
P.S, i can enter fastboot mode on the phone via power+volume up.
thanks for the help so far, i can't seem to find much help other than from you so far
Click to expand...
Click to collapse
so i managed to get into qualcomm mode, updated the drivers, and ran "MSM8994DownloadTool.exe" in administrator mode. it went as it's outlined in your guide. however, at the end of that process, the phone got stuck in a bootloop (the oneplus logo flashes for a moment and restarts). and can't get into qualcomm mode now, since when i connect the usb to the pc while the phone off, it lights the display (to show that it's charging, i think). any way back from this?
(i can still get into fastboot mode)

inwarse said:
so i managed to get into qualcomm mode, updated the drivers, and ran "MSM8994DownloadTool.exe" in administrator mode. it went as it's outlined in your guide. however, at the end of that process, the phone got stuck in a bootloop (the oneplus logo flashes for a moment and restarts). and can't get into qualcomm mode now, since when i connect the usb to the pc while the phone off, it lights the display (to show that it's charging, i think). any way back from this?
(i can still get into fastboot mode)
Click to expand...
Click to collapse
Do you still have TWRP? If yes go to TWRP and shut down the phone there, afterwards you should be able to enter qualcomm mode again.
otherwise you have to try (i think 10s power button will shut the device completely down). You should be able to enter qualcomm mode if the device is fully shut off (your scenario sounds as if the device is not fully shut off when u connect it to the pc).
Just to go sure: You are absolutely sure to have a oneplus2, are you?

inwarse said:
so i managed to get into qualcomm mode, updated the drivers, and ran "MSM8994DownloadTool.exe" in administrator mode. it went as it's outlined in your guide. however, at the end of that process, the phone got stuck in a bootloop (the oneplus logo flashes for a moment and restarts). and can't get into qualcomm mode now, since when i connect the usb to the pc while the phone off, it lights the display (to show that it's charging, i think). any way back from this?
(i can still get into fastboot mode)
Click to expand...
Click to collapse
Could you resolve the issue?

wertus33333 said:
Could you resolve the issue?
Click to expand...
Click to collapse
nope. kept running into issue after issue, so got dejected and gave up.