I just installed a junsun android car radio. The problem is it doesn't turn off when the ignition is off also I can't find car settings.
Does ant body have a fix.
My truck is a 2011 f150.
Help is needed
Related
Hi,
Does anyone know, if it's possible to turn on the radio when the ignition of my car is off?
I didn't use a CAN-Bus Interface, the head unit is directly connected to steady plus and ignition plus.
Thanks.
Maximilian
Hey guys,
I have a Isudar PX5 head unit
I have the amplifier connected via RCA to the 'Subwoofer Out' connection on the radio.
Everything works OK at first, but after shutting down (turning off car/leaving car), the output is not working. I can hear the subwoofer just 'throbbing?' But no respons.
Only way to get it back to work again is to disconnect the radio from the car and reconnect it. (Now i am taking out the car's radio fuse and putting it back in).
Can anybody help me with this issue ? ? ?
Thanks in advance
Hello,
I bought an android car radio in 2020.
ref. Junsun V1 pro for Peugeot 307 - 2 + 32Go - Intel SC9853
I can't get FM stations (a lot of crackling and almost inaudible radio).
I plug in the antenna plug at the back, try an alternative app (NavRadio + but does not work), the regulation of the parameters of the unit without success.
The model does not really have any FM specific parameters in the factory options.
Thanking you for your help.
JML7 said:
Hello,
I bought an android car radio in 2020.
ref. Junsun V1 pro for Peugeot 307 - 2 + 32Go - Intel SC9853
I can't get FM stations (a lot of crackling and almost inaudible radio).
I plug in the antenna plug at the back, try an alternative app (NavRadio + but does not work), the regulation of the parameters of the unit without success.
The model does not really have any FM specific parameters in the factory options.
Thanking you for your help.
Click to expand...
Click to collapse
I've also that car stereo and the same problem
JML7 said:
Hello,
I bought an android car radio in 2020.
ref. Junsun V1 pro for Peugeot 307 - 2 + 32Go - Intel SC9853
I can't get FM stations (a lot of crackling and almost inaudible radio).
I plug in the antenna plug at the back, try an alternative app (NavRadio + but does not work), the regulation of the parameters of the unit without success.
The model does not really have any FM specific parameters in the factory options.
Thanking you for your help.
Click to expand...
Click to collapse
I've tryed some firmware but same problem.
The radio can hear me only 4 FM station ......from 102mhz to 107mhz.
My radio is Junsun V1 pro for Mazda 2 4+64gb Intel SC9853 with
nxp6851 audio chip.
I'll drive my crazy my antenna is ok, tryed with another stereo is all right.
I've buyed also fm amplifer with no results.
Radio nav+ not resolve the problem.
So this is my problem:
Car: BMW 2005 e87 with original Flap screen working
1. I connected my Junsun Android 11 8259 8GB RAM 128GB storage to my car (I think I managed to get everything done right...). The Junsun headunit works very good, but there is no Car Info.
2. I coded my car with NCS Expert and NCS Dummy (FLAP nicht_aktiv) - triple checking everything, but still nothing in the Car Info app...
3. Today I decided to reconnect old Flap screen....but I don't get anything on that either...NOTHING...
4. Again, I decoded the ECU (FLAP aktiv), I triple checked everything...but nothing is displaying on the Flap screen...and can't get it to display on the Junsun Headunit either...
I just don't have any more ideas....
Whatever you think...I am willing to discuss it.
hello, i bought a junsun vi pro radio to install in my renault megane however i can't turn on the radio. anyone who can help me?
I installed a Junsun V1 unit on the Megane II. Maybe I can help you.
You mean you can open or play the radio feature or you can't even get the whole unit starting?
problem solved. I found a video on youtube that talked about the bic box and managed to connect the cable and get the radio working. Thanks